An overview on the conversion of glycerol to value-added industrial products via chemical and biochemical routes

Advances in stress-tolerance elements for microbial cell factories

Microorganisms, particularly extremophiles, have evolved multiple adaptation mechanisms to address diverse stress conditions during survival in unique environments. Their responses to environmental coercion decide not only survival in severe conditions but are also an essential factor determining bioproduction performance. The design of robust cell factories should take the balance of their growing and bioproduction into account. Thus, mining and redesigning stress-tolerance elements to optimize the performance of cell factories under various extreme conditions is necessary. Here, we reviewed several stress-tolerance elements, including acid-tolerant elements, saline-alkali-resistant elements, thermotolerant elements, antioxidant elements, and so on, providing potential materials for the construction of cell factories and the development of synthetic biology. Strategies for mining and redesigning stress-tolerance elements were also discussed. Moreover, several applications of stress-tolerance elements were provided, and perspectives and discussions for potential strategies for screening stress-tolerance elements were made.

Green solvent-based extraction of three Fabaceae species: A potential antioxidant, anti-diabetic, and anti-leishmanial agents

The Fabaceae is renowned for its diverse range of chemical compounds with significant biological activities, making it a valuable subject for pharmacological studies. The chemical composition and biological activities of three Fabaceae species were investigated using methanol separately and in combination with dimethyl sulfoxide (DMSO) and glycerol for extraction. The results revealed the highest phenolic (49.59 ± 0.38 mg gallic acid equivalent/g), flavonoid (29.16 ± 0.39 mg rutin equivalent/g), and alkaloid (14.23 ± 0.54 mg atropine equivalent/g) contents in the Caesalpinia decapetala methanol extracts. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity and DNA protection activity were the highest (0.88 ± 0.43 μg/mL IC50 and 2149.26 band intensity) in Albizia julibrissin methanol extracts. The α-amylase activity was highest in all methanol extracts (<15 μg/mL IC50 values), while the α-glucosidase inhibition potential was highest (<1 μg/mL IC50 value) in the methanol-glycerol and methanol-DMSO extracts. Pearson coefficient analysis showed a strong positive correlation between the DPPH and α-amylase assays and phytochemicals. Anti-leishmanial activity was observed in decreasing order: A. julibrissin (74.75 %) > C. decapetala (70.86 %) > Indigofera atropurpurea (65.34 %). Gas chromatography-mass spectrometry revealed 33 volatile compounds and, aamong these (Z)-9-octadecenamide was detected in the highest concentration ranging from 21.85 to 38.61 %. Only the methanol extracts of the examined species could be assessed for in vivo studies for immediate applications.

Copper Phthalocyanine Improving Nonaqueous Catalysis of Pseudomonas cepacia Lipase for Ester Synthesis

The nonaqueous catalysis of lipases is significant for synthesis of high pure esters, but they usually behave low catalytic activity due to denaturation and aggregation of enzyme protein in organic phases. To improve the nonaqueous catalysis, the inexpensive copper phthalocyanine was taken as a new carrier on which Pseudomonas cepacia lipase was immobilized by physical absorption, and used for synthesis of hexyl acetate, an important flavor, via transesterification of hexanol and vinyl acetate. Results showed that the desired loading was 10-mg lipase immobilized on 10-mg copper phthalocyanine powder. When the immobilized lipase was employed in the reaction system consisted of 1.5-mL hexanol and 1.5-mL vinyl acetate at 37°C and 160 rpm, the conversion was fivefolds of that catalyzed by native lipase after 1 h, and reached 99.0% after 8 h. In six times of 8-h reuses, the immobilized lipase behaved an activity attenuation rate 1.22% h-1, lower than 1.77% h-1 of native lipase, which meant that the immobilized lipase was more stable. Even at the room temperature and the static state without shaking or stirring, the immobilized lipase still brought conversion 42.8% after 10 h and the native lipase gave 20.1%. Obviously, the immobilized lipase is an available biocatalyst in organic phase and has great potential in food industry.

Sustainability analysis of orange peel biorefineries

Biorefineries are constantly evolving since new technological advances in enzyme and microbial processes are boosting research for producing new bio-based products. Nevertheless, the step towards real process implementation must overcome a series of stages based on process sustainability in the early design stages. Orange peel (OP) has been profiled as a potential raw material for producing different products. Few studies have estimated the sustainability of OP-based biorefineries considering the upstream influence on the final process performance. This research aims to perform the sustainability assessment of several OP valorization pathways based on experimental data applying the biorefinery concept. Steam distillation and polyphenolic compound extraction prior to saccharification and anaerobic digestion increase the process performance. A glucose concentration and biogas yield of 21.43 g/L (0.44 g/g OP, db) and 415 mL/g SV were obtained, respectively. An essential oil extraction yield of 1.17 g/100 g OP (db) with a d-limonene content of 91.62% was produced. Moreover, hesperidin, apigenin, and naringenin yields of 7.88 mg/g, 0.475 mg/g, and 0.675 mg/g were obtained. An OP-based biorefinery addressed to produce essential oil, polyphenolic compounds, and biogas with a processing 25 tons/day (wb) has a sustainability index of 66.88%, higher than the values obtained with lesser upstream stages. In conclusion, an integral OP upgrading leads to better enzymatic and anaerobic digestion performances, as well as, a high process sustainability.

Optimization of asymmetric bioreduction conditions of 1-(thiophen-2-yl)ethanone by Weissella cibaria N9 using a desirability function-embedded face-centered optimization model

Prochiral ketones can be effectively bio-reduced to chiral secondary alcohols by whole-cell biocatalysts, which are possible useful precursors to synthesize physiologically active chemicals and natural products. When whole-cell biocatalysts strains are used, bioreduction process can be influenced by various cultural factors, and it is vital to optimize these factors that affect selectivity, conversion rate, and yield. In this study, Weissella cibaria N9 was used as whole-cell biocatalyst for bioreduction of 1-(thiophen-2-yl)ethanone, and cultural design factors were optimized using a desirability function-embedded face-centered optimization model. For this, effects of pH (4.5-5.5-6.5, x1), (2) temperature (25-30-35 °C, x2), (3) incubation period (24-48-72 h, x3), and (4) agitation speed (100-150-200 rpm, x4) on two response variables; (1) ee (%) and (2) cr (%) were tested. Next, desirability function-embedded face-centered optimization model revealed that a pH of 6.43, a temperature of 26.04 °C, an incubation period of 52.41 h, and an agitation speed of 150 rpm were the optimum levels and the estimated ee and cr responses were 99.31% and 98.16%, respectively. Importantly, the actual experimental ee and cr responses were similar to the estimated values indicating the capability of the offered desirability function-embedded face-centered optimization model when using the optimum cultural conditions.

Catalytic dehydration of glycerol over Cu-Fe-Al-based oxides: understanding changes in active sites throughout the reaction

The glycerol conversion into acetol using Fe, Al and Cu-based oxides was investigated. XRD results indicate the formation of nanosized particles with high phase dispersion, however, Raman, Mössbauer, 27Al NMR and XPS spectroscopies suggest the presence of iron(iii) oxide, Al2O3 and CuO phases. The FTIR with pyridine adsorption revealed high Lewis acidity. The TPR profile showed the reduction temperature range for the Fe3+ and Cu2+ sites, indicating the suitable condition for pretreatment. The N2 adsorption-desorption isotherms indicated the presence of micro-mesopores with interesting textural properties and specific area varying between 71 and 220 m2 g-1, while the porous morphology was observed by SEM and TEM images. The optimized catalytic tests showed glycerol conversion of 60% and acetol selectivity of 92% with 17% of coke according to TG profile. The recycling tests confirmed the efficiency of the solid, reaching 28% conversion and 91% acetol selectivity after four reuses and, after reactivation in an oxidizing atmosphere, the catalytic performance obtained results close to the second reuse. The interaction between the different Lewis acid sites involved in the mechanisms for the acetol and coke formation on the catalyst surface is discussed. The charge distribution represented by colors which indicates the acid-base surface was evaluated by a simple theoretical-computational study based on the DFT approach. The synergy between the active sites indicates that the presence of Cu0/Cu+ drastically increases the acetol selectivity which is a more important characteristic than the high Lewis acidity of Fen+ and Al3+.

Biosynthesis of diisooctyl 2,5-furandicarboxylate by Candida antarctica lipase B (CALB) immobilized on a macroporous epoxy resin

Diisooctyl 2,5-furandicarboxylate (DEF), an ester derivative of 2,5-furandicarboxylic acid (FDCA, a bio-based platform chemical), resembles the physical and chemical properties of phthalates. Due to its excellent biodegradability, DEF is considered a safer alternative to the hazardous phthalate plasticizers. Although FDCA esters are currently mainly produced by chemical synthesis, the enzymatic synthesis of DEF is a green, promising alternative. The current study investigated the biosynthesis of DEF by Candida antarctica lipase B (CALB) immobilized on macroporous resins. Out of five macroporous resins (NKA-9, LX-1000EP, LX-1000HA, XAD-7HP, and XAD-8) evaluated, the LX-1000EP epoxy resin was identified as the best carrier for CALB, and the XAD-7HP weakly polar resin was identified as the second best. The optimal immobilization conditions were as follows: CALB (500 μL) and LX-1000EP (0.1 g) were incubated in phosphate butter (20 mM, pH 6.0) for 10 h at 35°C. The resulting immobilized CALB (EP-CALB) showed an activity of 639 U/g in the hydrolysis of p-nitrophenyl acetate, with an immobilization efficiency of 87.8% and an activity recovery rate of 56.4%. Using 0.02 g EP-CALB as the catalyst in 10 mL toluene, and the molar ratio of 2,5-dimethyl furanediformate (1 mmol/mL) and isooctyl alcohol (4 mmol/mL) that was 1:4, a DEF conversion rate of 91.3% was achieved after a 24-h incubation at 50°C. EP-CALB had similar thermal stability and organic solvent tolerance compared to Novozym 435, and both were superior to CALB immobilized on the XAD-7HP resin. EP-CALB also exhibited excellent operational stability, with a conversion rate of 52.6% after 10 repeated uses. EP-CALB could be a promising alternative to Novozym 435 in the biomanufacturing of green and safe plasticizers such as DEF.

Mining of a novel reductase and its application for asymmetric reduction of p-methoxyacetophenone

(R)-1-(4-methoxyphenyl) ethanol [(R)-1b] is an essential precursor for the synthesis of aryl propanoic acids' anti-inflammatatory drugs. Biocatalysts for (R)-1b preparation are limited and reductase has problems of low substrate concentration and low conversion rate. As a result, there is a constant need for discovering novel biocatalysts with excellent catalytic performances. In this study, a novel reductase LpSDR from Lacisediminihabitans profunda for the biocatalytic reduction of p-methoxyacetophenone (1a) to (R)-1b was obtained based on gene-mining technology, and some key reaction parameters were also investigated to improve the conversion rate of 1a using whole cells of recombinant Escherichia coli expressing reductase LpSDR as biocatalysts. It was found that the optimal concentration of isopropanol, ZnSO4·7H2O solution, 1a, and recombinant E. coli resting cells, the optimal reaction temperature, buffer pH, and reaction time were 1.95 mol l-1, 0.75 mmol l-1, 75 mmol l-1, 250 g (wet weight) l-1, 28°C, 7.0, and 21 h, respectively. Under the above conditions, a conversion rate of 99.5% and an enantiomeric excess of 99.6% were obtained, which were superior to the corresponding values previously reported. This study provides a novel reductase LpSDR, which is helpful in reducing 1a to (R)-1b.

Research Progress and Trends on Utilization of Lignocellulosic Residues as Supports for Enzyme Immobilization via Advanced Bibliometric Analysis

Lignocellulosic biomasses are used in several applications, such as energy production, materials, and biofuels. These applications result in increased consumption and waste generation of these materials. However, alternative uses are being developed to solve the problem of waste generated in the industry. Thus, research is carried out to ensure the use of these biomasses as enzymatic support. These surveys can be accompanied using the advanced bibliometric analysis tool that can help determine the biomasses used and other perspectives on the subject. With this, the present work aims to carry out an advanced bibliometric analysis approaching the main studies related to the use of lignocellulosic biomass as an enzymatic support. This study will be carried out by highlighting the main countries/regions that carry out productions, research areas that involve the theme, and future trends in these areas. It was observed that there is a cooperation between China, USA, and India, where China holds 28.07% of publications in this area, being the country with the greatest impact in the area. Finally, it is possible to define that the use of these new supports is a trend in the field of biotechnology.

Bacterial cellulose: Strategies for its production in the context of bioeconomy

Bacterial cellulose has advantages over plant-derived cellulose, which make its use for industrial applications easier and more profitable. Its intrinsic properties have been stimulating the global biopolymer market, with strong growth expectations in the coming years. Several bacterial species are capable of producing bacterial cellulose under different culture conditions; in this context, strategies aimed at metabolic engineering and several possibilities of carbon sources have provided opportunities for the bacterial cellulose's biotechnological exploration. In this article, an overview of biosynthesis pathways in different carbon sources for the main producing microorganisms, metabolic flux under different growth conditions, and their influence on the structural and functional characteristics of bacterial cellulose is provided. In addition, the main industrial applications and ways to reduce costs and optimize its production using alternative sources are discussed, contributing to new insights on the exploitation of this biomaterial in the context of the bioeconomy.

Carbohydrate microcapsules tailored and grafted for covalent immobilization of glucose isomerase for pharmaceutical and food industries

Carrageenan is one of the most common carbohydrates utilised in the entrapment industry to immobilise cells and enzymes. However, it lacks functionality. Carrageenan has been grafted to produce fructose by covalently immobilising glucose isomerase (GI). Fructose is one of the most widely used sweeteners in beverages, food production, and the pharmaceutical business. Up to 91.1 U g^-1 gel beads are immobilised by the grafted beads. Immobilized GI has a V_max of 13.8 times that of the free enzyme. pH of immobilized GI was improved from 6.5-7 to 6-7.5 that means more stability in wide pH range. Also, optimum temperature was improved and become 65-75 °C while it was at 70 °C for free enzyme. The immovability and tolerance of the gel beads immobilised with GI over 15 consecutive cycles were demonstrated in a reusability test, with 88 percent of the enzyme's original activity retained, compared to 60 percent by other authors. These findings are encouraging for high-fructose corn syrup producers.

Enantioselective resolution of (R,S)-DMPM to prepare (R)-DMPM by an adsorbed-covalent crosslinked esterase PAE07 from Pseudochrobactrum asaccharolyticum WZZ003

(R)-N-(2,6-dimethylphenyl) aminopropionic acid methyl ester ((R)-DMPM) is an important chiral intermediate of the fungicide N-(2,6-Dimethylphenyl)-N-(methoxyacetyl)-alanine methyl ester ((R)-Metalaxyl). In this study, (1) D3520 (macroporous acrylic anion resin), selected from the ten resins, was used to immobilize the esterase from Pseudochrobactrum asaccharolyticum WZZ003 (PAE07) for resoluting the (R,S)-DMPM to obtain (R)-DMPM. (2) Up to 20 g/L PAE07 could be immobilized onto D3520 with a high enzymatic activity of 32.4 U/g. Moreover, the Km and Vmax values of 19.1 mM and 2.8 mM/min for D3520-immobilized PAE07 indicated its high activity and stereoselectivity. (3) The optimal temperature and pH for the immobilized PAE07 were 40 ℃ and 8.0, and substrate concentration was up to 0.35 M. After 15 h reaction, the conversion rate from (R,S)-DMPM to (R)-DMPM was 48.0% and the e.e.p and E values were 99.5% and 1393.0, respectively. In scale-up resolution, 200 g/L substrate and 12.5 g immobilized esterase PAE07 condition, a conversion rate from substrate to product of 48.1% and a product e.e.p of 98% were obtained within 12 h, with the activity of immobilized PAE07 retained 80.2% after 5 cycles of reactions. These results indicated that the D3520-immobilized esterase PAE07 had great potential for enzymatic resolution of (R,S)-DMPM to prepare (R)-Metalaxyl.

Chlorella vulgaris Extract-Decorated Gold Nanoparticle Hybridized Antimicrobial Hydrogel as a Potential Dressing

This study reports a novel design of a moisturizing and antimicrobial hydrogel with injectable properties, using a green solvent (glycerol) as a cross-linking agent and gold nanoparticle reduced by Chlorella extract as an antimicrobial approach. We have synthesized gold nanoparticles (AuNPs) with environmentally friendly and bio-safe properties using Chlorella aqueous extracts (AuNPs@Chlorella). Characterization of the nanoparticles by ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), Raman spectrum, and transmission electron microscope (TEM) confirmed that spherical AuNPs with the particle size of 10-20 nm were successfully synthesized. An analysis of the enhancement of the stability of gelatin hydrogels by the addition of glycerol and AuNPs was performed by rheometry. In addition, we also used Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) to confirm the good antibacterial activity. Therefore, the as-prepared gelatin-glycerol hydrogels containing AuNPs@Chlorella are most likely promising alternatives for wound healing dressings.

Surface Modification of Magnetic ZIF-90 Nanoparticles Improves the Microenvironment of Immobilized Lipase and Its Application in Esterification

Interactions of enzymes with supports significantly affect the activity and stability of immobilized enzymes. Herein, amino-functionalized ionic liquid (IL)-grafted magnetic zeolitic imidazolate framework-90 (MZIF-90) was prepared and used to immobilize porcine pancreatic lipase (PPL). The nanocomposites were fully characterized; meanwhile, the interactions between ILs and ZIF-90 were calculated based on density functional theory. The prepared biocatalyst (PPL-ILs/MZIF-90) had a lipase loading of 178.3 mg/g and hydrolysis activity up to 287.5 U/g. When the biocatalyst was used to synthesize isoamyl acetate, the reaction media, molar ratio of alcohol/acid, temperature, and reaction time were optimized. Under the optimized reaction conditions (in hexane, alcohol/acid = 3:1, under 45 °C, reacted for 9 h), the ester yield reached 85.5%. The results of the stability test showed that PPL-ILs/MZIF-90 retained 88.7% of the initial activity after storing for 35 days and 92.5% of the initial activity after reusing for seven cycles for synthesizing isoamyl acetate. Moreover, the secondary structure analysis showed that the synthesized supports protected the active conformation of immobilized lipase, which lead to the enhanced catalytic performance. Additionally, the biocatalyst can be easily separated with a magnet, which facilitated the reusability. This study provides insights regarding the application of metal organic framework composites in the field of enzyme catalysis.

The evaluation of the performance of rice husk and rice straw as potential matrix to obtain the best lipase immobilized system: creating wealth from wastes

India generates 126.6 and 42 million tons of Rice straw (RS) and Rice husk (RH) annually, respectively. These agro-processing wastes feedstock are dumped in landfills or burnt, releasing toxic gases and particulate matter into the environment. This paper explores the valorization of these wastes feedstock into sustainable, economic products. We compare these wastes as matrices for lipase immobilization. These matrices were characterized, different parameters (pH, temperature, ionic strength, and metal ion cofactors) were checked, and the selected matrix was analyzed for reusability and hydrolysis of vegetable oils. Lipase immobilized Rice straw (LIRS) showed the highest activity with 72.84% protein loading. Field emission scanning electron microscopy (FESEM) demonstrated morphological changes after enzyme immobilization. FTIR showed no new bond formation, and immobilization data was fitted to Freundlich adsorption isotherm (with K = 12.18 mg/g, n_F = 4.5). The highest activity with protein loading, 91.05%, was observed at pH 8, 37 °C temperature, 50 mM ionic strength, and lipase activity doubled in the presence of Mg²⁺ ions. The LIRS retained 75% of its initial activity up to five cycles and efficiently hydrolyzed different oils. The results reflected that the LIRS system performs better and can be used to degrade oily waste.

A Theoretical and Experimental Study for Enzymatic Biodiesel Production from Babassu Oil (Orbignya sp.) Using Eversa Lipase

A theoretical and experimental study was carried out on the biocatalytic production of babassu biodiesel through enzymatic hydroesterification. The complete hydrolysis of babassu oil was carried out using a 1:1 mass solution at 40 °C for 4 h using 0.4% of lipase from Thermomyces lanuginosus (TLL). Then, with the use of Eversa® Transform 2.0 lipase in the esterification step, a statistical design was used, varying the temperature (25–55 °C), the molar ratio between free fatty acids (FFAs) and methanol (1:1 to 1:9), the percentage of biocatalyst (0.1% to 0.9%), and the reaction time (1–5 h) using the Taguchi method. The ideal reaction levels obtained after the statistical treatment were 5 h of reaction at 40 °C at a molar ratio of 1:5 (FFAs/methanol) using 0.9% of the biocatalyst. These optimal conditions were validated by chromatographic analysis; following the EN 14103 standard, the sample showed an ester concentration of 95.76%. A theoretical study was carried out to evaluate the stability of Eversa with FFAs. It was observed in the molecular docking results that the ligands interacted directly with the catalytic site. Through molecular dynamics studies, it was verified that there were no significant conformational changes in the studied complexes. Theoretical and experimental results show the feasibility of this process.

Directed Immobilization of PETase on Mesoporous Silica Enables Sustained Depolymerase Activity in Synthetic Wastewater Conditions

Microplastic accumulation in terrestrial and aquatic environments is a growing environmental challenge. Biodegradation has shown promise as an intervention strategy for reducing the spread of microplastics. The wastewater treatment system is a key intervention point in microplastic biodegradation due to its pivotal role in the water cycle at the interface between human activity and the environmental. However, the best characterized microplastic degradation enzyme, PETase, lacks the stability to perform at scale in wastewater treatment. In this work, we show that genetic fusion of PETase to a silica binding peptide enables directed immobilization of the enzyme onto silica nanoparticles. PETase activity in simulated wastewater conditions is quantified by linear regression from time zero to the time of maximum fluorescence of a fluorescent oxidized product of PETase degradation of PET microfibers. Mesoporous silica is shown to be a superior support material to nonporous silica. The resulting biocatalytic nanomaterial has up to 2.5-fold enhanced stability and 6.2-fold increased activity compared to free enzyme in unbuffered, 40 °C simulated influent (ionic strength ∼15 mM). In unbuffered, 40 °C simulated effluent (ionic strength ∼700 μM), reaction velocity and overall catalytic activity were increased by the biocatalytic material 2.1-fold relative to free PETase. All reactions were performed in 0.2 mL volumes, and enzyme concentrations were normalized across both free and immobilized samples to 9 μg/mL. Site-directed mutagenesis is shown to be a complementary technique to directed immobilization, which may aid in optimization of the biomaterial for wastewater applications. PETase stabilization in application-relevant environments as shown here enables progress toward application of PETase for microplastic biodegradation in wastewater treatment.

The Application of Cellulose Acetate Membranes for Separation of Fermentation Broths by the Reverse Osmosis: A Feasibility Study

Recently, there has been a special research focus on the bioconversion of glycerol to 1,3-propanediol (1,3-PD) due to its significance in the chemical industry. However, the treatment and separation of fermentation broths is a great challenge. Currently, the reverse osmosis (RO) process is a reliable state-of-the-art technique for separation of biological solutions. This study (as the first to do so) investigated the feasibility of separation of 1,3-PD broths with the use of cellulose acetate (CA) membrane by the RO process. The experiments were carried out using the installation equipped with the plate module, under the transmembrane pressure (TMP) and temperature of 1 MPa and 298 K, respectively. It was found that the used membrane was suitable for broth separation. Indeed, it was noted that 1,3-PD, as a target product, migrated through the membrane; meanwhile, other broth components were rejected in various degrees. Moreover, it was proven that retention of carboxylic acids tended to increase with increasing molecular weight, according to the following order: succinic acid > lactic acid > acetic acid > formic acid. With regards to ions, retention degree increased with the increase of ionic radius and decrease of diffusion coefficient. Finally, it was demonstrated that the CA membrane is resistant to irreversible fouling, which has a positive effect on the economic viability of the process.

Immobilization of Candida antarctica Lipase A onto Macroporous Resin NKA-9: Esterification and Glycerolysis Performance Study

In this study, lipase A from Candida antarctica (CALA) was immobilized onto the macroporous resin NKA-9. Immobilization conditions (pH, time and CALA concentration) were studied, enzymatic activity and immobilization efficiency (IE) up to 968.89 U/g and 53.19% were respectively obtained under optimal conditions (immobilization pH 5.0, time 5 h and CALA concentration at 30 mg/mL). Then, the NKA-9 supported CALA (CALA@NKA-9) samples were used to catalyze glycerolysis in solvent-free system. With 0.25 g of the present CALA@NKA-9 (soybean oil 3.52 g and glycerol 0.184 g) and after 12 h reaction at 50 °C, diacylglycerols (DAG) content up to 64.37% and triacylglycerols (TAG) conversion at 83.33% were obtained. The relationship between temperature and TAG conversion was LnV ₀ = 13.9310-6.4212/T for CALA@NKA-9. Meanwhile, the activation energy (Ea) of CALA@NKA-9 was calculated to be 53.39 kJ/mol. In addition, reusability in the glycerolysis reaction was also evaluated, and 57.82% of the initial glycerolysis activity was retained after 9 consecutive applications. Furthermore, the CALA@NKA-9 was also used to catalyze the esterification (esterification of fatty acids with glycerol), however, the present CALA@NKA-9 cannot initiate the esterification. Therefore, the present CALA@NKA-9 is shown to be potential for DAG production through glycerolysis reaction.

Encapsulation of lipases by nucleotide/metal ion coordination polymers: enzymatic properties and their applications in glycerolysis and esterification studies

BACKGROUND

In the present study, lipases of TLL (lipase from Thermomyces lanuginosus), AOL (lipase from Aspergillus oryzae), RML (lipase from Rhizomucor miehei), BCL (lipase from Burkholderia cepacia), CALA (Candida antarctica lipase A) and LU (Lecitase® Ultra) were encapsulated into nucleotide-hybrid metal coordination polymers (CPs). Enzyme concentration was optimized for encapsulation and the enzymatic properties of the obtained lipases were investigated. In addition, their performance in glycerolysis and esterification was evaluated, and glycerolysis conditions (water content, temperature and time) were optimized.

RESULTS

Hydrolysis activity over 10 000 U g^-1 and activity recovery over 90% were observed from AOL@GMP/Tb, TLL@GMP/Tb and RML@GMP/Tb. GMP/Tb encapsulation (of AOL, TLL, RML and LU) improved their thermostability when incubated in air. The encapsulated lipases exhibited moderate [triacylglycerols (TAG) conversion 30-50%] and considerable glycerolysis activity (TAG conversion over 60%). TAG conversions from 69.37% to 82.35% and diacylglycerols (DAG) contents from 58.62% to 64.88% were obtained from CALA@GMP/metal samples (except for CALA@GMP/Cu). Interestingly, none of the encapsulated lipases initiated the esterification reaction. AOL@GMP/Tb, TLL@GMP/Tb, RML@GMP/Tb and CALA@GMP/Tb showed good reusability in glycerolysis, with 88.80%, 94.67%, 89.85% and 78.16% of their initial glycerolysis activity, respectively, remaining after five cycles of reuse. The relationships between temperature and TAG conversion were LnV₀  = 6.5364-3.7943/T and LnV₀  = 13.8820-6.4684/T for AOL@GMP/Tb and CALA@GMP/Tb, respectively; in addition, their activation energies were 31.55 and 53.78 kJ mol^-1 , respectively.

CONCLUSION

Most of the present encapsulated lipases exhibited moderate and considerable glycerolysis activity. In addition, AOL@GMP/Tb, TLL@GMP/Tb, RML@GMP/Tb and CALA@GMP/Tb exhibited good reusability in glycerolysis reactions and potential in practical applications. © 2022 Society of Chemical Industry.

Copper Phthalocyanine Improving Nonaqueous Catalysis of Pseudomonas cepacia Lipase for Ester Synthesis

The nonaqueous catalysis of lipases is significant for synthesis of high pure esters, but they usually behave low catalytic activity due to denaturation and aggregation of enzyme protein in organic phases. To improve the nonaqueous catalysis, the inexpensive copper phthalocyanine was taken as a new carrier on which Pseudomonas cepacia lipase was immobilized by physical absorption, and used for synthesis of hexyl acetate, an important flavor, via transesterification of hexanol and vinyl acetate. Results showed that the desired loading was 10 mg lipase immobilized on 10 mg copper phthalocyanine powder. When the immobilized lipase was employed in the reaction system consisted of 1.5 mL hexanol and 1.5 mL vinyl acetate at 37℃ and 160 rpm, the conversion was five fold of that catalyzed by native lipase after 1 h, and reached 99.0% after 8 h. Undergoing six times of 8-h reuses, the immobilized lipase had an activity attenuation rate 1.22% h^- 1, lower than 1.77% h^- 1 of native lipase, which meant that the immobilized lipase was more stable. Even at the room temperature and the static state without shaking or stirring, the immobilized lipase could bring conversion 42.8% after 10 h and the native lipase gave 20.1%. Obviously, the immobilized lipase is an available biocatalyst in organic phase and has great potential in food industry.

The Chemistry and Applications of Metal-Organic Frameworks (MOFs) as Industrial Enzyme Immobilization Systems

Enzymatic biocatalysis is a sustainable technology. Enzymes are versatile and highly efficient biocatalysts, and have been widely employed due to their biodegradable nature. However, because the three-dimensional structure of these enzymes is predominantly maintained by weaker non-covalent interactions, external conditions, such as temperature and pH variations, as well as the presence of chemical compounds, can modify or even neutralize their biological activity. The enablement of this category of processes is the result of the several advances in the areas of molecular biology and biotechnology achieved over the past two decades. In this scenario, metal–organic frameworks (MOFs) are highlighted as efficient supports for enzyme immobilization. They can be used to ‘house’ a specific enzyme, providing it with protection from environmental influences. This review discusses MOFs as structures; emphasizes their synthesis strategies, properties, and applications; explores the existing methods of using immobilization processes of various enzymes; and lists their possible chemical modifications and combinations with other compounds to formulate the ideal supports for a given application.

Biomolecular Chemical Simulations on Enantioselectivity and Reactivity of Lipase Enzymes to Azulene Derivatives

Biomolecular chemical simulations have recently become a useful research method in the fields of organic chemistry and bioscience. In the last few years, we have been focusing on the biomolecular computational simulation on lipase enzyme and ligand complexes to predict the enantioselectivity and reactivity of lipases toward non-natural organic compounds. In this paper, we describe the molecular simulations including molecular dynamics (MD) and fragment molecular orbital (FMO) calculations for the complexes of Candida antarctica lipase type A (CALA) and trifluoromethylazulene alcohol derivatives. From the MD calculations, we found that the fast-reacting enantiomer of esters with high enantioselectivity stays in the vicinity of the active site of CALA, while the slow-reacting enantiomer leaves the active site of CALA. On the other hand, both ( R)- and ( S)-enantiomers of ester with low ensntioselectivity were found to keep near to near the active site of CALA. Further, for the esters that do not react with lipase enzyme, we found that both ( R)- and ( S)-enantiomers move away from the active site of lipase enzyme. From the FMO calculations, we found that each fast-reacting enantiomer of esters with high enantioselectivity strongly interacts with certain particular amino acid residues in CALA containing Asp95, while both ( R)- and ( S)-enantiomers of ester with low enantioselectivity interact with same amino acid residues in CALA including Asp95. These results suggest that it is possible to predict not only the enantioselectivity but also the reactivity of CALA and to identify the amino acid residues important to the enzymatic reaction. Therefore, we consider that our computational simulations would be a useful method for predicting and understanding the reactivity and the enantioselectivity of lipase-catalyzed biotransformations.

Fabrication of lipase-loaded particles by coacervation with chitosan

Coacervation of the lipase from Aspergillus oryzae (AOL) with chitosan was a feasible way to fabricate lipase-loaded particles and the optimum conditions were phase separation pH 5.5, chitosan to AOL mass ratio 1:5, and temperature 25 °C in the absence of NaCl, which conferred an AOL loading efficiency of up to 95.48% and activity recovery of 69.60%. The AOL-chitosan coacervates were highly porous and more susceptible to weight loss upon heating. Coacervation with chitosan increased the activity of AOL and shifted its optimum pH from 7.0 to 6.0, but exerted no effect on its optimum temperature (45 °C). Thermal deactivation kinetics analysis revealed that the coacervated AOL was more thermal stable, while the Michaelis-Menten kinetics analysis indicated that coacervation with chitosan increased the V_max of AOL by 2.4 folds, but decreased its substrate affinity by 3.6 folds. Hence, the AOL-chitosan coacervates are potential in the construction of Pickering emulsion-based lipase catalysis systems.

SpyTag/Catcher chemistry induces the formation of active inclusion bodies in E. coli

SpyTag/Catcher chemistry is usually applied to engineer robust enzymes via head-to-tail cyclization using spontaneous intramolecular isopeptide bond formation. However, the SpyTag/Catcher induced intercellular protein assembly in vivo cannot be ignored. It was found that some active inclusion bodies had generated to different proportions in the expression of six SpyTag/Catcher labeled proteins (CatIBs-STCProtein). Some factors that may affect the formation of CatIBs-STCProtein were discussed, and the subunit quantities were found to be strongly positively related to the formation of protein aggregates. Approximately 85.44% of the activity of the octameric protein leucine dehydrogenase (LDH) was expressed in aggregates, while the activity of the monomeric protein green fluorescence protein (GFP) in aggregates was 12.51%. The results indicated that SpyTag/Catcher can be used to form protein aggregates in E. coli. To facilitate the advantages of CatIBs-STCProtein, we took the CatIBs-STCLDH as an example and further chemically cross-linked with glutaraldehyde to obtain novel cross-linked enzyme aggregates (CLEAs-CatIBs-STCLDH). CLEAs-CatIBs-STCLDH had good thermal stability and organic solvents stability, and its activity remained 51.03% after incubation at 60 °C for 100 mins. Moreover, the crosslinked CatIBs-STCLDH also showed superior stability over traditional CLEAs, and its activity remained 98.70% after 10 cycles of catalysis.

Glutaraldehyde functionalization of halloysite nanoclay enhances immobilization efficacy of endoinulinase for fructooligosaccharides production from inulin

Current work describes the enhancement of immobilization efficacy of Aspergillus tritici endoinulinase onto halloysite nanoclay using crosslinker glutaraldehyde. Under statistical optimized immobilization conditions, viz. glutaraldehyde 1.50% (v/v), enzyme coupling-time 2.20 h, glutaraldehyde activation-time 1.00 h and endoinulinase load 50 IU, maximum activity yield (65.77%) and immobilization yield (82.45%) was obtained. An enhancement of 1.15- and 1.23-fold in both enzyme activity yield and immobilization yield of endoinulinase was observed, when compared with APTES-functionalized halloysite nanoclay immobilized endoinulinase. Immobilized biocatalyst showed maximum activity at pH 5.0 and temperature 60 °C with broad pH (4.0-8.5) and temperature (50-75 °C) stability. Further, optimal hydrolytic conditions (inulin concentration 8.0%; endoinulinase load 80 IU; agitation 125 rpm and hydrolysis-time 13 h) supported fructooligosaccharides yield (95.44%) in a batch system. HPTLC studies blueprint confirmed 95.44% fructooligosaccharides containing 35.41% kestose, 26.19% nystose and 9.69% fructofuranosylnystose. The developed immobilized biocatalyst shown good stability of 8 cycles for inulin hydrolysis.

Rice straw enhancing catalysis of Pseudomonas fluorescens lipase for synthesis of citronellyl acetate

Citronellyl acetate as an important flavor, can be effectively synthesized by lipase catalysis in nonaqueous system. But lipases usually behave low catalytic activity due to aggregation and denaturation of them in organic phase. To enhance the nonaqueous catalysis, based on the mechanism of lipases activated at water/oil (organic phase) interface, the inexpensive race straw was processed into powder and filaments on which Pseudomonas fluorescens lipase was immobilized by physical adsorption, used for synthesis of citronellyl acetate via transesterification of citronellol and vinyl acetate. Results showed that the desired loading was 10 mg lipase immobilized on 30 mg rice straw filaments or 25 mg rice straw powder. When the two immobilized lipases were employed in the reaction system consisted of 1-mL citronellol and 2-mL vinyl acetate at 37 ℃ and 160 rpm, the conversions all reached 99.8% after 12 h. Under the reaction condition, the conversion catalyzed by 10 mg native lipase was 85.1%. Undergoing six times of 8-h reuses in the organic system, the filament and power immobilized lipases had weak activity attenuation rates 0.36 and 0.32% h^-1, lower than 1.52% h^-1 of native lipase. Even at the room temperature and the static state without shaking and stirring, the rice straw filaments immobilized lipase could brought conversion 62.9% after 10 h but the native lipase only gave 37.0%. Obviously, the rice straw, especially its filaments, is an inexpensive and available natural material to prepare immobilized lipase with desired catalysis in organic phase, meant significant potential in flavor industry.

Current Status and Future Perspectives of Supports and Protocols for Enzyme Immobilization

The market for industrial enzymes has witnessed constant growth, which is currently around 7% a year, projected to reach $10.5 billion in 2024. Lipases are hydrolase enzymes naturally responsible for triglyceride hydrolysis. They are the most expansively used industrial biocatalysts, with wide application in a broad range of industries. However, these biocatalytic processes are usually limited by the low stability of the enzyme, the half-life time, and the processes required to solve these problems are complex and lack application feasibility at the industrial scale. Emerging technologies create new materials for enzyme carriers and sophisticate the well-known immobilization principles to produce more robust, eco-friendlier, and cheaper biocatalysts. Therefore, this review discusses the trending studies and industrial applications of the materials and protocols for lipase immobilization, analyzing their advantages and disadvantages. Finally, it summarizes the current challenges and potential alternatives for lipases at the industrial level.

Immobilization of Candida rugosa lipase on magnetic chitosan beads and application in flavor esters synthesis

In this work, magnetic chitosan (MCH) beads were synthesized by phase-inversion method, and grafted with polydopamine (PDA) and then used for direct immobilization of Candida rugosa lipase by Schiff base reaction. The amount of immobilized enzyme and the retained activity were found to be 47.3 mg/g and 72.8%, respectively, at pH 7.0, and at 25 °C. The apparent Km (9.7 mmol/L), and Vmax (384 U/mg) values of the immobilized lipase were significantly changed compared to the free lipase. The MCH@PDA-lipase was better thermal and storage stability at different temperatures than those of the free lipase. In hexane medium, the esterification reaction results showed that the maximum conversions of isoamylalcohol and isopentyl alcohol to isoamyl acetate and isopentyl acetate using the MCH@PDA-lipase were found to be 98.4 ± 1.3% and 73.7 ± 0.7%, respectively. These results showed that the MCH@PDA-lipase can be used as an operative immobilized enzyme system for many biotechnological applications.

Biosynthesis of benzyl cinnamate using an efficient immobilized lipase entrapped in nano-molecular cages

To improve the performance of lipase in biosynthesis of benzyl cinnamate, a new immobilized lipase by entrapping enzyme into nano-molecular cages was designed. Consequently, the entrapped lipase showed a robust immobilization, which diminished the leakage of lipase notably in use. Moreover, the entrapped lipase exhibited higher activity (57.1 U/mg) than free lipase (50.0 U/mg), demonstrating that the native conformation of lipase was not destroyed during immobilization. Compared with the adsorbed lipase (half-life 40.7 min) and free lipase (half-life 29.8 min), the entrapped lipase (half-life 85.3 min) increased the stability by about 2-3 times. Furthermore, the entrapped lipase was applied in biosynthesis of benzyl cinnamate, where it showed excellent activity and re-usability. After 7 cycles, the yield of benzyl cinnamate catalyzed by the entrapped lipase remained 70.2%, while the yield catalyzed by the adsorbed lipase was only about 10%. These results indicated that the nano-molecular cages could inhibit denaturation of lipase and maintain its activity well.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.