Chemiluminescence sensor for sulfonylurea herbicide using molecular imprinted microspheres as recognition element

A Review on Recent Innovations of Pretreatment and Analysis Methods for Sulfonylurea Herbicides

Sulfonylurea herbicides (SUHs) are widely used in agriculture because of their low dosage, low cost, and high selectivity. However, due to improper use and lack of effective management, their residues pose a threat to the human health through environment and food pollution. Therefore, there is a need for simple, quick, economical, and effective methods to analyze SUHs in plant-derived foods, crops, and environmental samples. The present article presents a comprehensive review of the pretreatment and analytical technologies used for SUHs in various sample matrices, focusing on the developments since 2010. The main pretreatment methods include liquid-liquid extraction, solid-phase extraction, QuEChERS, and different microextraction methods, whereas analytical methods mainly include liquid chromatography coupled with different detectors, capillary electrophoresis, among others. In addition, the present study also compared the advantages and disadvantages of the methods and the future development is prospected.

Use of molecular imprinted polymers as sensitive/selective luminescent sensing probes for pesticides/herbicides in water and food samples

As non-biological molecules, molecular imprinted polymers (MIPs) can be made as antibody mimics for the development of luminescence sensors for various targets. The combination of MIPs with nanomaterials is further recognized as a useful option to improve the sensitivity of luminescence sensors. In this work, the recent progresses made in the fabrication of fluorescence, phosphorescence, chemiluminescence, and electrochemiluminescence sensors based on such combination have been reviewed with emphasis on the detection of pesticides/herbicides. Accordingly, the materials that are most feasible for the detection of such targets are recommended based on the MIP technologies.

[Advances in application of molecularly imprinted polymers to the detection of polar pesticide residues]

Polar pesticides can be primarily classified as fungicides, herbicides, and insecticides; their rich variety and low cost have led to their extensive utilization in agriculture. However, the overuse of polar pesticides can lead to environmental contamination, such as water or soil pollution, which can also increase the risk of pesticide exposure among human life directly, or indirectly through contact with animal and plant-derived food. There are considerable differences in the physical and chemical properties of polar pesticides, as well as their trace amounts in complex food and environmental samples, posing immense challenges to their accurate detection. As a kind of artificially prepared selective adsorbent, molecularly imprinted polymers (MIPs) possess specific recognition sites complementary to template molecules in terms of the spatial structure, size, and chemical functional groups. With many advantages such as easy preparation, low cost, as well as good chemical and mechanical stability, MIPs have been widely applied in sample pretreatment and the analysis of polar pesticide residues. MIPs are typically used as adsorption materials in solid phase extraction (SPE) methods, including magnetic solid phase extraction (MSPE), dispersed solid phase extraction (DSPE), and stir bar sorptive extraction (SBSE). To rapidly detect polar pesticide residues with high sensitivity, MIPs are also used in the preparation of fluorescent sensors and electrochemical sensors. Furthermore, MIPs can be employed as the substrate in surface-enhanced Raman spectroscopy and as the substrate for the ion source in mass spectrometry for polar pesticide residue analysis. Thus far, various molecularly imprinted materials have been reported for the efficient separation and analysis of polar pesticide residues in various complex matrices. However, there is no review that summarizes the recent advances in MIPs for the determination of polar pesticides. This review introduces imprinting strategies and polymerization methods for MIPs, and briefly summarizes some new molecular imprinting strategies and preparation technologies. The application of MIPs in recent years (particularly the last five years) to the detection of polar pesticide residues including neonicotinoids, organophosphorus, triazines, azoles, and urea is then systematically summarized. Finally, the future development direction and trends for MIPs are proposed considering existing challenges, with the aim of providing reference to guide future research on MIPs in the field of polar pesticide residue detection.

A molecularly imprinted polymer based chemiluminescence array sensor for one-step determination of phenothiazines and benzodiazepines in pig urine

The residues of phenothiazines and benzodiazepines in foods of animal origin are dangerous to consumers. For inspection of their abuses, this study for the first time reported on the use of a chemiluminescence array sensor for the simultaneous determination of four phenothiazines and five benzodiazepines in pig urine. Two molecularly imprinted polymers were coated in different wells of a conventional 96-well microtiter plate as the recognition reagents. After sample loading, the absorbed analytes were initiated directly by using an imidazole enhanced bis(2,4,6-trichlorophenyl)oxalate-hydrogen peroxide system to emit light. The assay process consisted of only one sample-loading step prior to data acquisition, so one test was finished within 10 min. The limits of detection for the nine drugs in the pig urine were in a range of 0.1 to 0.6 pg/mL, and the recoveries from the fortified blank urine samples were in a range of 80.3 to 95%. Furthermore, the sensor could be reused six times. Therefore, this sensor could be used as a simple, rapid, sensitive and reusable tool for routine screening for residues of phenothiazines and benzodiazepines in pig urine.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Determination of picogram quantities of chlortoluron in soil samples by luminol-chitosan chemiluminescence system

Based on the enhancing effect of chitosan (CS) on luminol-dissolved oxygen chemiluminescence (CL) reaction, a flow injection (FI) luminol-CS CL system was established. It was found that the increase of CL intensity was proportional to the concentrations of CS ranging from 0.7 to 10.0 μmol l(-1). In the presence of chlortoluron (CTU), the CL intensity of luminol-CS system could be obviously inhibited and the decrements of CL intensity were linearly proportional to the logarithm of CTU concentrations ranging from 0.01 to 70.0 ng ml(-1), giving the limit of detection 3.0 pg ml(-1) (3σ). At a flow rate of 2.0 ml min(-1), the whole process including sampling and washing could be accomplished within 36 s, offering a sample throughput of 100 h(-1). The proposed FI-CL method was successfully applied to the determination of CTU in soil samples with recoveries ranging from 95.0 % to 105.3 % and the relative standard deviations (RSDs) of less than 4.0 %.

Isolation and characterization of a novel cinosulfuron degrading Kurthia sp. from a methanogenic microbial consortium

A novel bacterial strain LAM0713 was isolated from a methanogenic bacterial complexes and identified as Kurthia sp. based on morphological, cultural, physio-biochemical characteristics and analysis of 16S rDNA sequence. Strain LAM0713 was found to be capable of utilizing cinosulfuron as sole nitrogen source for growth over a wide range of temperature (20-40 °C) and pH (5.0-9.0). Response surface methodology was used to optimize the degradation conditions. Strain LAM0713 could efficiently degrade 92.4% of initially supplemented 50 mg·L(1) cinosulfuron under the optimum conditions (pH 6.9, 31.8 °C) within 5 days. Five intermediates formed during cinosulfuron degradation were detected by liquid chromatography mass spectrometry (LC-MS), and a metabolic pathway for cinosulfuron degradation was proposed via cleavage of the sulfonylurea bridge. It is the first report showing that Kurthia sp. strain could degrade sulfonylurea herbicides, suggesting that strain LAM0713 may provide new insight into microbial degradation of herbicides.