Formation of fluorescent carbon nanodots from kitchen wastes and their application for detection of Fe3+

Engineering the future: Unveiling novel paths in heavy metal wastewater remediation with advanced carbon-based nanomaterials - Beyond performance comparison, tackling challenges, and exploring opportunities

This review addresses the pressing issue of heavy metal pollution in water, specifically focusing on the application of adsorption technology utilizing carbon materials such as biochar, carbon nanotubes, graphene, and carbon quantum dots. Utilizing bibliometric analysis with VOSviewer based on Web of Science core dataset, this study identifies research hotspots related to carbon-based materials in heavy metal applications over the past decade. However, existing literature still lacks sufficient comparative analysis of the potential of carbon-based materials' structural characteristics and inherent advantages in heavy metal applications. This review strategically addresses this gap, offering a comprehensive comparative analysis of these four materials from an engineering application perspective. It offers a thorough evaluation of their suitability for various water treatment applications, providing a detailed examination of their advantages and limitations in heavy metal application. Additionally, the review provides insights into performance comparisons, addresses challenges, and explores emerging opportunities in this field. Insights into potential application fields based on structural characteristics and inherent advantages are presented. This unique focus on a comprehensive comparative analysis distinguishes the article, offering a nuanced perspective on the strengths and future possibilities of carbon materials in tackling the global challenge of heavy metal pollution in water.

Fe3+-induced luminescence quenching in carbon dots - mechanism unveiled

Carbon dot (CD)-based fluorimetric sensors have attracted immense attention for the detection of metal ions. Among the available works in this direction, more than 70% of the studies reported the detection of Fe3+ through luminescence quenching. Ferric ions are significant species from environmental and biological point of view. Excited-state electron transfer from carbon dots to ferric ions is suggested as the reason for the luminescence quenching. However, to date, no solid proof was provided to demonstrate this electron transfer process. Herein, N-doped blue luminescent carbon dots prepared via hydrothermal carbonization are used to demonstrate the exact mechanism operating in the above-mentioned detection strategy. The carbon dots possessed an average size of 4.9 nm, and exhibited good aqueous solubility as well as an excitation wavelength-dependent emission. Fe3+-mediated luminescence quenching was quantitatively achieved at the micromolar level, with a detection limit of 1.426 μM. The CD-mediated reduction of ferric ions is confirmed by spectral analysis. Fe3+-induced luminescence quenching was partially restored in the presence of ascorbic acid, enabling the sub-micromolar level monitoring of this analyte, with the lowest detection amount of 276 nM. Turnbull's blue method is adopted for confirming the reducing role of ascorbic acid, which eventually increased the luminescence of the system, evoking a turn-on response.

Green-derived carbon dots: A potent tool for biosensing in food safety

The impact of food contaminants on ecosystems and human health has attracted widespread global attention, and there is an urgent need to develop reliable food safety detection methods. Recently, carbon dots (CDs) have been considered as a powerful material to construct sensors for chemical analysis. Based on the concept of resource conversion and sustainable development, the use of natural, harmless, and renewable materials for the preparation of CDs without the involvement of chemical hazards is a current hot topic. This paper reviews the research progress of green-derived CDs and their application in food safety biosensing. The fabrications of green-derived CDs using various biomasses are described in detail, and the application of CDs especially the sensing mechanisms of photoluminescence, colorimetric, electrochemiluminescence and other sensors are provided. Finally, existing shortcomings and current challenges as well as prospects for food safety monitoring are discussed. We believe that this work provides strong insight into the application of CDs in the sensing of various contaminants.

Turning waste into wealth: nitrogen-doped carbon quantum dots derived from fruits wastes for sensing

Hydrothermal treatment of m-phenylenediamine and grape seed powder has been adopted to synthesize nitrogen-doped carbon quantum dots (N-CQDs). The prepared N-CQDs possessed outstanding optical properties and high quantum yield. Based on the combined effect of static quenching effect and inner filter effect of permanganate (MnO₄ ^- ) to N-CQDs and the redox reaction that occurred between MnO₄ ^- and l-ascorbic acid (l-AA), an 'off-on' fluorescence strategy with N-CQDs has been proposed for the detection of MnO₄ ^- and l-AA. The proposed fluorescent probe was fast, sensitive and selective to MnO₄ ^- and l-AA under mild conditions. In addition, the satisfactory results of the proposed strategy for the detection of MnO₄ ^- and l-AA in real samples indicated its practicability.

Natural source of carbon dots from part of a plant and its applications: a review

Carbon dots (CDs) are carbon nanoparticles with a size of less than 10 nm, and are synthesized from various sources; they have been of great interest to scientists worldwide due to their unique optical, electrical, and chemical properties. Sources of carbon are inexpensive and can be classified as a renewable natural resources. Many researchers use CDs because of their low toxicity, better water solubility, high biocompatibility, and stable photoluminescence. The simple methods for producing CDs are hydrothermal and use inexpensive equipment, have low energy consumption, simple manipulation, and one-step preparation. Since the discovery of CDs, researchers have used them in various applications such as sensing, bioimaging, drug delivery, and catalysis. In this review, CDs synthesized from natural resources such as samples from herbs, roots, leaves, flowers, and fruit and some applications are described. This review provides a summary of carbon dots that is expected to provide further information for development of new CDs.

Exploring the Potential of Carbon Dots to Combat COVID-19

Viral diseases are considered as a global burden. The eradication of viral diseases is always a challenging task in medical research due to the high infectivity and mutation capability of the virus. The ongoing COVID-19 pandemic is still not under control even after several months of the first reported case and global spread. Neither a specific drug nor a vaccine is available for public use yet. In the pursuit of a promising strategy, carbon dots could be considered as potential nanostructure against this viral pandemic. This review explores the possibility of carbon nano-dots to combat COVID-19 based on some reported studies. Carbon dots are photoluminescent carbon nanoparticles, smaller than 10 nm in dimension with a very attractive photostable and biocompatible properties which can be surfaced modified or functionalized. These photoluminescent tiny particles have captured much attention owing to their functionalization property and biocompatibility. In response to this pandemic outbreak, this review attempts to summarize the potential use of carbon dots in antiviral therapy with particular emphasis on their probable role in the battlefront against COVID-19 including their possible biosensing applications.

Sensor and Bioimaging Studies Based on Carbon Quantum Dots: The Green Chemistry Approach

Since carbon quantum dots have high photoluminescent efficiency, it has been a desired material in sensor and bioimaging applications. In recent years, the green chemistry approach has been preferred and the production of quantum dots has been reported in many studies using different precursors from natural, abundant, or waste sources. Hydrothermal, chemical oxidation, microwave supported, ultrasonic, solvothermal, pyrolysis, laser etching, solid-state, plasma, and electrochemical methods have been reported in the literature. In this review article, green chemistry strategies for carbon quantum dot synthesis is summarized and compared with conventional methods using methodologic and statistical data. Furthermore, a detailed discussion on sensor and bioimaging applications of carbon quantum dots produced with green synthesis approaches are presented with a special focus on the last decade.

"Luminescent carbon nanodots: Current prospects on synthesis, properties and sensing applications"

"Nanocarbon science" ignited interest owing to its substantial scope in biomedicine, energy and environment-beneficial applications. Carbon dots (C-dots), a multi-faceted nanocarbon material, emerged as a homologue to graphene and henceforth geared extensive investigation both on its properties and applications. Eximious properties like excitation-wavelength tunable fluorescence emission, up-converted photoluminescence, photon-induced electron transfer, low cytotoxicity, chiroptical behavior, high chemical and photostability set the ground for astounding applications of carbon dots. Abundant availability of raw "green" precursors complementary to other molecular/graphitic precursors make them environmentally benign, inexpensive and ultimately "nanomaterials of the current decade". This review focuses on the synthesis of carbon dots not only from natural sources but also from other carbonaceous precursors and contemplates the inherent but controversial properties. We also aim to garner the attention of readers to the recent progress achieved by C-dots in one of its prestantious area of applications as nanosensors.

Abidin Z. Sustainable Development of Enhanced Luminescence Polymer-Carbon Dots Composite Film for Rapid Cd2+ Removal from Wastewater

As a remedy for environmental pollution, a versatile synthetic approach has been developed to prepare polyvinyl alcohol (PVA)/nitrogen-doped carbon dots (CDs) composite film (PVA-CDs) for removal of toxic cadmium ions. The CDs were first synthesized using carboxymethylcellulose (CMC) of oil palms empty fruit bunch wastes with the addition of polyethyleneimine (PEI) and then the CDs were embedded with PVA. The PVA-CDs film possess synergistic functionalities through increasing the content of hydrogen bonds for chemisorption compared to the pure CDs. Optical analysis of PVA-CDs film was performed by ultraviolet-visible and fluorescence spectroscopy. Compared to the pure CDs, the solid-state PVA-CDs displayed a bright blue color with a quantum yield (QY) of 47%; they possess excitation-independent emission and a higher Cd2+ removal efficiency of 91.1%. The equilibrium state was achieved within 10 min. It was found that adsorption data fit well with the pseudo-second-order kinetic and Langmuir isotherm models. The maximum adsorption uptake was 113.6 mg g-1 at an optimal pH of 7. Desorption experiments showhe that adsorbent can be reused fruitfully for five adsorption-desorption cycles using 0.1 HCl elution. The film was successfully applied to real water samples with a removal efficiency of 95.34% and 90.9% for tap and drinking water, respectively. The fabricated membrane is biodegradable and its preparation follows an ecofriendly green route.

Fluorescent recognition of Fe3+ in acidic environment by enhanced-quantum yield N-doped carbon dots: optimization of variables using central composite design

A versatile synthetic approach for development of highly fluorescent nitrogen-doped carbon dots (N-CDs) from carboxymethylcellulose in the presence of linear polyethyleneimine (LPEI) has been developed. According to single factor method, central composite design incorporated with response surface methodology matrix was applied to find and model optimal conditions for the temperature (220-260 °C), duration (1-3 h) and LPEI weight (0.5-1.5%). The statistical results show that duration was the most significant parameter for efficient carbonization conversion rate in comparison with temperature and LPEI weight. The reduced cubic model (R2 = 0.9993) shows a good correlation between the experimental data and predicted values. The optimal variables were temperature of 260 °C, duration of 2 h and LPEI weight of 1%. Under these conditions, quantum yield of up to 44% was obtained. The numerically optimized N-CDs have an average size of 3.4 nm with graphitic nature owing to the abundant amino species incorporated into the carbon core framework. The blue-green N-CDs possess emission dependent upon the solvent polarity, wide pH stability with enhanced emission in an acidic environment. Impressively, the N-CDs show long-shelf-life for up to 1 year with no noticeable precipitation. The N-CDs were able to recognize a high concentration of Fe3+ ions with a detection limit of 0.14 μM in acidic solution owing to the special coordination for Fe3+ to be captured by electron-donating oxygen/ amino groups around N-CDs. Moreover, the N-CDs can also be used as a new kind of fluorescent ink for imaging applications.

Green Synthesized Luminescent Carbon Nanodots for the Sensing Application of Fe3+ Ions

A single step hydrothermal mode of carbon nanodots (C-dots) synthesis from house-hold kitchen garbage such as snake gourd peel extract was successfully carried out. Characterisation of green synthesized C-dots were accomplished using UV-Visible and FTIR spectroscopy, Spectrofluorimetry and HRTEM. C-dots exhibited an appreciable quantum yield of 28.6%. Excitation-dependent photoluminescence emission properties and pH-sensitivity of C-dots were also studied in detail. C-dots exhibited strikingly selective detection of Fe³⁺ ions via fluorescence quenching mechanism. Linearity was obtained in a concentration range of 10-100 μM with detection limit of 0.398 μM in accordance with the Stern-Volmer relation. The existence of oxygen containing functional moieties in luminescent C-dots could be attributed to the effectual complexation between the metal ion and C-dots. The selective sensing property of C-dots towards Fe³⁺ ions provide avenue for biochemical analysis related to iron metabolism and diagnosis of anaemia.

Green synthesis, biomedical and biotechnological applications of carbon and graphene quantum dots. A review

Carbon and graphene quantum dots are prepared using top-down and bottom-up methods. Sustainable synthesis of quantum dots has several advantages such as the use of low-cost and non-toxic raw materials, simple operations, expeditious reactions, renewable resources and straightforward post-processing steps. These nanomaterials are promising for clinical and biomedical sciences, especially in bioimaging, diagnosis, bioanalytical assays and biosensors. Here we review green methods for the fabrication of quantum dots, and biomedical and biotechnological applications.

Facile synthesis of N, P-doped carbon dots from maize starch via a solvothermal approach for the highly sensitive detection of Fe3+

Nitrogen/phosphorus-doped carbon dots (N, P-CDs) with a quantum yield as high as 76.5% were synthesized by carbonizing maize starch via a facile ethanol solvothermal approach and utilized for the detection of Fe³⁺.

Facile preparation of high fluorescent carbon quantum dots from orange waste peels for nonlinear optical applications

A facile and eco-friendly hydrothermal method was used to prepare carbon quantum dots (CQDs) using orange waste peels. The synthesized CQDs were well dispersed and the average diameter was 2.9 ± 0.5 nm. Functional group identification of the CQDs was confirmed by Fourier transform infrared spectrum analysis. Fluorescence properties of the synthesized CQDs exhibited blue emission. The fluorescence quantum yield of the CQDs was around 11.37% at an excitation wavelength of 330 nm. The higher order nonlinear optical properties were examined using a Z-scan technique and a continuous wave laser that was operated at a wavelength of 532 nm. Results demonstrated that the synthesis of CQDs can be considered as promising for optical switching devices, bio-scanning, and bio-imaging for optoelectronic applications.

Review of Carbon and Graphene Quantum Dots for Sensing

Carbon and graphene quantum dots (CQDs and GQDs), known as zero-dimensional (0D) nanomaterials, have been attracting increasing attention in sensing and bioimaging. Their unique electronic, fluorescent, photoluminescent, chemiluminescent, and electrochemiluminescent properties are what gives them potential in sensing. In this Review, we summarize the basic knowledge on CQDs and GQDs before focusing on their application to sensing thus far followed by a discussion of future directions for research into CQDs- and GQD-based nanomaterials in sensing. With regard to the latter, the authors suggest that with the potential of these nanomaterials in sensing more research is needed on understanding their optical properties and why the synthetic methods influence their properties so much, into methods of surface functionalization that provide greater selectivity in sensing and into new sensing concepts that utilize the virtues of these nanomaterials to give us new or better sensors that could not be achieved in other ways.

Miscanthus grass-derived carbon dots to selectively detect Fe3+ ions

Novel fluorescent carbon dots (CDs) were synthesized using an economically feasible and green one-step heating process. Miscanthus, a perennial grass and an inexpensive sustainable biomass, was utilized as the starting material to prepare CDs and doped CDs (nitrogen, phosphorous and nitrogen-phosphorous dual doped). The abundance of oxygen-containing functional groups in Miscanthus-derived CDs (MCD) and doped MCD was confirmed via Fourier-transform infrared (FTIR) and energy dispersive X-ray spectroscopy (EDS). The average size of MCD, N-doped MCD, P-doped MCD and dual-doped MCDs was found to be 7.87 ± 0.27, 4.6 ± 0.21, 6.7 ± 0.38 and 5.3 ± 0.32 nm, respectively. The synthesized MCD and doped MCD exhibited a quantum yield (QY) of 4.71, 11.65, 2.33 and 9.63% for the MCD, N-doped MCD, P-doped MCD and dual-doped MCD, respectively. MCD and doped MCD exhibited excellent excitation-dependent photoluminescence properties, with strong blue fluorescence upon irradiation with UV-light (365 nm). N-doped MCD exhibited superb selectivity towards Fe3+ ions, with a detection limit of 20 nM and a detection range from 0.02 to 2000 μM. The normalized linear relationship between the intensity of fluorescence emission of the prepared N-doped MCD and the concentration of Fe3+ ions was utilized to selectively and sensitively detect Fe3+ ions.

Highly selective chemosensor for repetitive detection of Fe3+in pure water and bioimaging

Combining octavinyl-polyhedral oligomeric silsesquioxane (OV-POSS) with amine-containing polyacrylamide (OV-POSS co-poly(acrylamide)) gives a new fluorescent polymeric chemo-sensor with complete water solubility.

Symbiotic relationship between hydrothermal carbonization technology and anaerobic digestion for food waste in China

Food waste (FW) is traditionally disposed through landfills and incineration in China. Nowadays, there are some promising methods, such as anaerobic digestion (AD) or feeding and composting, which are being applied in pilot cities. However, the inherent characteristics of Chinese FW may be regarded as a double-edged sword in the practical applications of these disposal methods. To overcome these challenges, two modes of the hydrothermal carbonization (HTC) process were reviewed as innovative strategies in this article. Meanwhile, the "symbiotic relationship" between Chinese FW and HTC technologies was highlighted. To improve treatment efficiency of FW, we should not only try different methods and develop existing technologies, but also pay more attention to the utilization and "1 + 1 > 2" synergistic effect of their combinations, such as the combination of HTC and AD as a co-treatment method for saving on the construction cost and avoiding redistribution of social resources.

Green synthesis of surface-passivated carbon dots from the prickly pear cactus as a fluorescent probe for the dual detection of arsenic(iii) and hypochlorite ions from drinking water

Efforts were made to develop a simple new approach for the green synthesis of surface-passivated carbon dots from edible prickly pear cactus fruit as the carbon source by a one-pot hydrothermal route. Glutathione (GSH) was passivated on the surface of the CDs to form a sensor probe, which exhibited excellent optical properties and water solubility. The prepared sensor was successfully characterized by UV-visible spectrophotometry, fluorescence spectrophotometry, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The simple sensing platform developed by the GSH-CDs was highly sensitive and selective with a “turn-off” fluorescence response for the dual detection of As³⁺ and ClO⁻ ions in drinking water. This sensing system exhibited effective quenching in the presence of As³⁺ and ClO⁻ ions to display the formation of metal complexes and surface interaction with an oxygen functional group. The oxygen-rich GSH-CDs afforded a better selectivity for As³⁺/ClO⁻ ions over other competitive ions. The fluorescence quenching measurement quantified the concentration range as 2–12 nM and 10–90 μM with the lower detection limit of 2.3 nM and 0.016 μM for the detection of As³⁺ and ClO⁻ ions, respectively. Further, we explored the potential applications of this simple, reliable, and cost-effective sensor for the detection of As³⁺/ClO⁻ ions in environmental samples for practical analysis.

Efforts were made to develop a simple new approach for the green synthesis of surface-passivated carbon dots from edible prickly pear cactus fruit as the carbon source by a one-pot hydrothermal route.

Green synthesis of fluorescent carbon dots from Borassus flabellifer flowers for label-free highly selective and sensitive detection of Fe3+ ions

Fluorescent carbon dots were derived from Borassus flabellifer flowers by thermal pyrolysis method and used for label-free highly selective and sensitive detection of Fe³⁺ ions.

Highly crystalline carbon dots from fresh tomato: UV emission and quantum confinement

In this article, fresh tomatoes are explored as a low-cost source to prepare high-performance carbon dots by using microwave-assisted pyrolysis. Given that amino groups might act as nucleophiles for cleaving covalent bridging ester or ether in the crosslinked macromolecules in the biomass bulk, ethylenediamine (EDA) and urea with amino groups were applied as nucleophiles to modulate the chemical composites of the carbon nanoparticles in order to tune their fluorescence emission and enhance their quantum yields. Very interestingly, the carbon dots synthesized in the presence of urea had a highly crystalline nature, a low-degree amorphous surface and were smaller than 5 nm. Moreover, the doped N contributed to the formation of a cyclic form of core that resulted in a strong electron-withdrawing ability within the conjugated C plane. Therefore, this type of carbon dot exhibited marked quantum confinement, with the maximum fluorescence peak located in the UV region. Carbon nanoparticles greater than 20 nm in size, prepared using pristine fresh tomato and in the presence of EDA, emitted surface state controlled fluorescence. Additionally, carbon nanoparticles synthesized using fresh tomato pulp in the presence of EDA and urea were explored for bioimaging of plant pathogenic fungi and the detection of vanillin.

Sustainable carbon-dots: recent advances in green carbon dots for sensing and bioimaging

This review article highlights recent progress in use of green precursors for synthesis of carbon-dots and their applications in fluorescence-based sensing and bioimaging.

Photoexcited State Properties of Carbon Dots from Thermally Induced Functionalization of Carbon Nanoparticles

Carbon dots are small carbon nanoparticles with various surface passivation schemes, in which more effective has been the deliberate chemical functionalization of the nanoparticles for brighter fluorescence emissions, though the synthesis method is more tedious and subject to some limitations in the selection of functionalization molecules. Another more popular synthesis method has been the carbonization of organic species, with the method being more efficient and versatile, but less controllable in the synthesis and for the desired dot structure and performance. In this work, a hybrid approach combining the advantageous characteristics of the two synthesis methods was applied to the preparation of carbon dots with polyethyleneimine (PEI) for surface passivation, where pre-processed and selected small carbon nanoparticles were functionalized with PEI in microwave-induced thermal reactions. The optical absorption and fluorescence emission properties were evaluated, and the results suggested that the carbon dots thus prepared shared the same photoexcited state characteristics with those from the deliberate chemical functionalization, including comparable fluorescence colors and other properties. A further demonstration on the similarity in photoexcited state properties was based on the same visible light-activated bactericidal functions of the PEI-carbon dots as those found in carbon dots from the deliberate chemical functionalization. The advantages and potential limitations of the hybrid approach for more controllable yet versatile and efficient syntheses of carbon dots are highlighted and discussed.

Carbon dots: surface engineering and applications

Carbon dots have attracted a great deal of attention because of their high performance, cheap and facile preparation, and potential applications in a wide area. In order to broaden their applications, especially to meet specific requirements, surface engineering, including tailoring surface functional group coating and subsequent chemical modification as required, is an effective strategy for further functionalization of carbon dots. In this article, representative approaches to coating the surface with various functional groups, and strategies for conjugating specific materials onto the surface of carbon dots for functional modification via covalent bonds, electrostatic interactions and hydrogen bonds are highlighted, as well as the results from explorations of their various applications in target modulated sensing, accurate drug delivery and bioimaging at high resolution.

Highly photoluminescent nitrogen-rich carbon dots from melamine and citric acid for the selective detection of iron(iii) ion

A hydrothermal strategy towards nitrogen-rich carbon dots with a high quantum yield of ∼42% has been successfully developed by using melamine and citric acid as the precursors.

Green preparation of nitrogen-doped carbon dots derived from silkworm chrysalis for cell imaging

Carbon dots (CDs) with a high quantum yield have been synthesized by a facile and green one-pot approach under microwaves with silkworm chrysalis (SC) as the natural carbon source, without using any other chemicals/reagents. The morphology and optical properties of the resultant CDs are characterized by TEM, XRD, FT-IR, XPS, UV-vis and photoluminescence (PL). The SC-CDs have an average size of 19 nm, and contain C, O and N with relative contents of ca. 71.32%, 22.96% and 5.72%, respectively. A significant emission at 420 nm at an excitation wavelength of 350 nm is recorded, resulting in a quantum yield of 46% with quinine sulfate (quantum yield 54%) as a reference. In addition to excellent solubility and stability in aqueous medium, the SC-CDs exhibit excitation-dependent photoluminescence with a large Stokes shift of 70 nm. It is further demonstrated that the SC-CDs exhibit a low cytotoxicity at a higher concentration of 15 mg mL^-1 and they are able to display bright blue, green and red colors under an inverted fluorescence microscope during cell imaging experiments, showing their vast potential in bioimaging.