Recent advances in fluorescence sensors based on DNA-MOF hybrids

Enhanced Cataluminescence Sensor Based on SiO2/MIL-53(Al) for Detecting Isobutylaldehyde

A simple, rapid, and reliable method for detecting harmful gases is urgently required in environmental security fields. In this study, a highly effective cataluminescence sensor based on SiO2/MIL-53(Al) composites was developed to detect trace isobutylaldehyde. The sensor was designed using isobutylaldehyde to generate an interesting cataluminescence phenomenon in SiO2/MIL-53(Al). Under optimized conditions, a positive linear relationship was observed between the signal intensity of the cataluminescence and isobutylaldehyde concentration. The isobutylaldehyde concentration range of 1.55-310 ppm responded well to the sensing test, with an excellent correlation coefficient of 0.9996. The minimum detectable concentration signal-to-noise ratio (S/N = 3) was found to be 0.49 ppm. In addition, the sensor was effectively utilized for analyzing trace isobutylaldehyde; the analysis resulted in recoveries ranging from 83.4% to 105%, with relative standard deviations (RSDs) of 4.8% to 9.4%. Furthermore, the mechanism of cataluminescence between SiO2/MIL-53(Al) and isobutylaldehyde was explored using GC-MS analysis and density functional theory. We expect that this cataluminescence methodology will provide an approach for the environmental monitoring of isobutylaldehyde.

State-of-the-art nanosensors and kits for the detection of antibiotic residues in milk and dairy products

Antibiotic resistance is increasingly seen as a future concern, but antibiotics are still commonly used in animals, leading to their accumulation in humans through the food chain and posing health risks. The development of nanomaterials has opened up possibilities for creating new sensing strategies to detect antibiotic residues, resulting in the emergence of innovative nanobiosensors with different benefits like rapidity, simplicity, accuracy, sensitivity, specificity, and precision. Therefore, this comprehensive review provides pertinent and current insights into nanomaterials-based electrochemical/optical sensors for the detection of antibitic residues (ANBr) across milk and dairy products. Here, we first discuss the commonly used ANBs in real products, the significance of ANBr, and also their binding/biological properties. Then, we provide an overview of the role of using different nanomaterials on the development of advanced nanobiosensors like fluorescence-based, colorimetric, surface-enhanced Raman scattering, surface plasmon resonance, and several important electrochemical nanobiosensors relying on different kinds of electrodes. The enhancement of ANB electrochemical behavior for detection is also outlined, along with a concise overview of the utilization of (bio)recognition units. Ultimately, this paper offers a perspective on the future concepts of this research field and commercialized nanomaterial-based sensors to help upgrade the sensing techniques for ANBr in dairy products.

Advances in Non-Electrochemical Sensing of Human Sweat Biomarkers: From Sweat Sampling to Signal Reading

Sweat, commonly referred to as the ultrafiltrate of blood plasma, is an essential physiological fluid in the human body. It contains a wide range of metabolites, electrolytes, and other biologically significant markers that are closely linked to human health. Compared to other bodily fluids, such as blood, sweat offers distinct advantages in terms of ease of collection and non-invasive detection. In recent years, considerable attention has been focused on wearable sweat sensors due to their potential for continuous monitoring of biomarkers. Electrochemical methods have been extensively used for in situ sweat biomarker analysis, as thoroughly reviewed by various researchers. This comprehensive review aims to provide an overview of recent advances in non-electrochemical methods for analyzing sweat, including colorimetric methods, fluorescence techniques, surface-enhanced Raman spectroscopy, and more. The review covers multiple aspects of non-electrochemical sweat analysis, encompassing sweat sampling methodologies, detection techniques, signal processing, and diverse applications. Furthermore, it highlights the current bottlenecks and challenges faced by non-electrochemical sensors, such as limitations and interference issues. Finally, the review concludes by offering insights into the prospects for non-electrochemical sensing technologies. By providing a valuable reference and inspiring researchers engaged in the field of sweat sensor development, this paper aspires to foster the creation of innovative and practical advancements in this domain.

Gold nanoparticles embedded Fe-BTC (AuNPs@Fe-BTC) metal-organic framework as a fluorescence sensor for the selective detection of As(III) in contaminated waters

In this article, a new off-mode fluorescent platform based on the metal-organic framework (MOF) is introduced as a highly selective and rapid chemical sensor for the detection of As(III) in water and wastewater samples. A typical Fe-BTC (BTC = 1,3,5-benzenetricarboxylate or trimesic acid) MOF was used as a porous template for loading gold nanoparticles (AuNPs@Fe-BTC MOF). The physicochemical properties of AuNPs@Fe-BTC MOF were characterized by Fourier-transform infrared spectroscopy (FT-IR), Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EAX), element mapping (MAP) and X-ray diffraction (XRD) analysis. This sensing method for As(III) ions is based on the fact that the fluorescence intensity of AuNPs@Fe-BTC MOF sensor decreases in proportion to the increase in As(III) concentration. The main effective factors on the performance of the sensor signal such as MOF dosage, sonication time, pH and reaction time were optimized. Under optimized conditions, the calibration graph was linear in the concentration range of 0.5-380 ng mL-1 of As(III) and the limit of detection was 0.2 ng mL-1. The proposed method was successfully validated by addition/recovery experiments by the determination of As(III) in four river water and two wastewater effluent samples.

A versatile MOF-derived theranostic for dual-miRNA controlled accurate cancer cell recognition and photodynamic therapy

Precise detection and monitoring of microRNAs (miRNAs) in living tumor cells is significant for the prompt diagnosis of cancer and provides important information for treatment of cancer. A significant challenge is developing methods for imaging different miRNAs simultaneously to further enhance diagnostic and treatment accuracy. In this work, a versatile MOF-derived theranostic system (DAPM) was constructed using photosensitive metal-organic frameworks (PMOF, PM) and a DNA AND logic gate (DA). The DAPM exhibited excellent biostability and enabled sensitive detection of miR-21 and miR-155, achieving a low limit of detection (LOD) for miR-21 (89.10 pM) and miR-155 (54.02 pM). The DAPM probe generated a fluorescence signal in tumor cells where miR-21 and miR-155 co-existed, demonstrating the enhanced ability of tumor cell recognition. Additionally, the DAPM achieved efficient ROS generation and concentration-dependent cytotoxicity under light irradiation, providing effective photodynamic therapy for anti-tumors. The proposed DAPM theranostic system enables accurate cancer diagnosis, and provides spatial and temporal information for PDT.

DNA-directed assembly of nanomaterials and their biomedical applications

In the past decades, DNA has been widely used in the field of nanostructures due to its unique programmable properties. Besides being used to form its own diverse structures such as the assembly of DNA origami, DNA can also be used for the assembly of nanostructures with other materials. In this review, different strategies for the functionalization of DNA on nanoparticle surfaces are listed, and the roles of DNA in the assembly of nanostructures as well as the influencing factors are discussed. Finally, the biomedical applications of DNA-assembled nanostructures were summarized. This review provided new insight into the application of DNA in nanostructure assembly.

Highly Sensitive Detection of Chymotrypsin Based on Metal Organic Frameworks with Peptides Sensors

In this study, peptides and composite nanomaterials based on copper nanoclusters (CuNCs) were used to detect chymotrypsin. The peptide was a chymotrypsin-specific cleavage peptide. The amino end of the peptide was covalently bound to CuNCs. The sulfhydryl group at the other end of the peptide can covalently combine with the composite nanomaterials. The fluorescence was quenched by fluorescence resonance energy transfer. The specific site of the peptide was cleaved by chymotrypsin. Therefore, the CuNCs were far away from the surface of the composite nanomaterials, and the intensity of fluorescence was restored. The limit of detection (LOD) using Porous Coordination Network (PCN)@graphene oxide (GO) @ gold nanoparticle (AuNP) sensor was lower than that of using PCN@AuNPs. The LOD based on PCN@GO@AuNPs was reduced from 9.57 pg mL^-1 to 3.91 pg mL^-1. This method was also used in a real sample. Therefore, it is a promising method in the biomedical field.

Poly cytosine (C)/poly adenine (A) modified probe for signal "on-off-on" assay of single-base mismatched dsDNA by a competitive mechanism

Direct discrimination of single-base mismatched dsDNA by a simple method or strategy would provide enormous opportunities for applications in the fields of life sciences and disease diagnosis. Herein, the peroxidase-mimicking activity of a metal-organic framework nanoprobe (MOF) was well exploited for the direct discrimination of single-base mismatched dsDNA based on a competition-induced signal on-off-on mechanism. The single-base mismatched dsDNA related with FecB gene (usually guanine (G)/thymine (T) mismatch) and MIL-88B-NH₂ were used as target and MOF model, respectively. Firstly, polyA/polyC were loosely adsorbed onto the MOFs via the weak interaction to block the peroxidase activity of MOF, inducing the signal transition from on to off. Unexpectedly, the single-base mismatched (GT) dsDNA could reverse the signal response of MOF probe from off to on. But it could not occur for other nonspecific mismatches, such as CT and TT-mismatched dsDNA. A synergistic interaction mechanism between multiple GT mismatches and polyA/polyC was attempted to explain the competitive dissociation of polyA/polyC from MOF for the recovery of peroxidase activity. With it, a wide linear detection ranges from 10^-9 M-10^-5 M of GT mismatched dsDNA and a low detection limit of 0.247 nM could be achieved, even in the real samples. The effect of mismatched base number or position was also studied. Such a simple, rapid, cost-effective, and one-step mixing and checking method for single-base mismatched dsDNA discrimination eliminates the complex sample pretreatment, special DNA probe design, exclusive amplification or signal readout means. It thus offers a simple and effective route for direct discrimination of mismatched dsDNA and might hold a huge potential for the applications in gene analysis, disease diagnosis, and elementary research in life sciences.

Metal-Organic Framework Fluorescence Sensors for Rapid and Accurate Detection of Melamine in Milk Powder

In this research, a simple, label-free, and ultra-sensitive fluorescent platform based on a metal-organic framework (MOF) has been developed to detect melamine in milk powder. This fluorescence sensor was fabricated from sensitized terbium (Tb)@NH₂-MIL-253 (Al) MOF using a hydrothermal method that involved combining the green emission of Tb (λ_em = 545 nm) with the blue emission of NH₂-MIL-253(Al) MOF (λ_em = 430 nm) under a single excitation wavelength (λ_ex = 335 nm). The fluorescence sensor was then used under optimized conditions (pH = 9.0; sensor concentration = 30 mg/L; response time = 30 s) to quantify melamine in milk powder. The accuracy, sensitivity, and reproducibility of this sensor were established compared to the high-performance liquid chromatography (HPLC) method. The linear range and lower limit of detection (LLOD, computed with 3σ/S) of the sensor were between 40-396.45 nM (equal to 25 µg/kg-0.25 mg/kg) and 40 nM (equal to 25 µg/kg), respectively, which is much less than the maximum residual level (MRL) for the detection of melamine in infant formula (1 mg/kg) and other foods/feeds (2.5 mg/kg). Additionally, the results had good agreement with the HPLC outcomes, suggesting that the NH₂-MIL-253(Al) MOF sensing probe has great precision and repeatability. To conclude, the new fluorescence sensor developed in this study can accurately and sensitively detect melamine in food samples, which may be useful for screening for adulteration of milk powders and other foods.

Sr(II) and Ba(II) Alkaline Earth Metal-Organic Frameworks (AE-MOFs) for Selective Gas Adsorption, Energy Storage, and Environmental Application

Two new alkaline earth metal-organic frameworks (AE-MOFs) containing Sr(II) (UPJS-15) or Ba(II) (UPJS-16) cations and extended tetrahedral linker (MTA) were synthesized and characterized in detail (UPJS stands for University of Pavol Jozef Safarik). Single-crystal X-ray analysis (SC-XRD) revealed that the materials are isostructural and, in their frameworks, one-dimensional channels are present with the size of ~11 × 10 Ų. The activation process of the compounds was studied by the combination of in situ heating infrared spectroscopy (IR), thermal analysis (TA) and in situ high-energy powder X-ray diffraction (HE-PXRD), which confirmed the stability of compounds after desolvation. The prepared compounds were investigated as adsorbents of different gases (Ar, N₂, CO₂, and H₂). Nitrogen and argon adsorption measurements showed that UPJS-15 has S_BET area of 1321 m² g^-1 (Ar) / 1250 m² g^-1 (N₂), and UPJS-16 does not adsorb mentioned gases. From the environmental application, the materials were studied as CO₂ adsorbents, and both compounds adsorb CO₂ with a maximum capacity of 22.4 wt.% @ 0 °C; 14.7 wt.% @ 20 °C and 101 kPa for UPJS-15 and 11.5 wt.% @ 0°C; 8.4 wt.% @ 20 °C and 101 kPa for UPJS-16. According to IAST calculations, UPJS-16 shows high selectivity (50 for CO₂/N₂ 10:90 mixture and 455 for CO₂/N₂ 50:50 mixture) and can be applied as CO₂ adsorbent from the atmosphere even at low pressures. The increased affinity of materials for CO₂ was also studied by DFT modelling, which revealed that the primary adsorption sites are coordinatively unsaturated sites on metal ions, azo bonds, and phenyl rings within the MTA linker. Regarding energy storage, the materials were studied as hydrogen adsorbents, but the materials showed low H₂ adsorption properties: 0.19 wt.% for UPJS-15 and 0.04 wt.% for UPJS-16 @ -196 °C and 101 kPa. The enhanced CO₂/H₂ selectivity could be used to scavenge carbon dioxide from hydrogen in WGS and DSR reactions. The second method of applying samples in the area of energy storage was the use of UPJS-15 as an additive in a lithium-sulfur battery. Cyclic performance at a cycling rate of 0.2 C showed an initial discharge capacity of 337 mAh g^-1, which decreased smoothly to 235 mAh g^-1 after 100 charge/discharge cycles.

An Overview of the Design of Metal-Organic Frameworks-Based Fluorescent Chemosensors and Biosensors

Taking advantage of high porosity, large surface area, tunable nanostructures and ease of functionalization, metal-organic frameworks (MOFs) have been popularly applied in different fields, including adsorption and separation, heterogeneous catalysis, drug delivery, light harvesting, and chemical/biological sensing. The abundant active sites for specific recognition and adjustable optical and electrical characteristics allow for the design of various sensing platforms with MOFs as promising candidates. In this review, we systematically introduce the recent advancements of MOFs-based fluorescent chemosensors and biosensors, mainly focusing on the sensing mechanisms and analytes, including inorganic ions, small organic molecules and biomarkers (e.g., small biomolecules, nucleic acids, proteins, enzymes, and tumor cells). This review may provide valuable references for the development of novel MOFs-based sensing platforms to meet the requirements of environment monitoring and clinical diagnosis.

Synthesis and Biomedical Applications of Highly Porous Metal-Organic Frameworks

In this review, aspects of the synthesis, framework topologies, and biomedical applications of highly porous metal-organic frameworks are discussed. The term "highly porous metal-organic frameworks" (HPMOFs) is used to denote MOFs with a surface area larger than 4000 m² g^-1. Such compounds are suitable for the encapsulation of a variety of large guest molecules, ranging from organic dyes to drugs and proteins, and hence they can address major contemporary challenges in the environmental and biomedical field. Numerous synthetic approaches towards HPMOFs have been developed and discussed herein. Attempts are made to categorise the most successful synthetic strategies; however, these are often not independent from each other, and a combination of different parameters is required to be thoroughly considered for the synthesis of stable HPMOFs. The majority of the HPMOFs in this review are of special interest not only because of their high porosity and fascinating structures, but also due to their capability to encapsulate and deliver drugs, proteins, enzymes, genes, or cells; hence, they are excellent candidates in biomedical applications that involve drug delivery, enzyme immobilisation, gene targeting, etc. The encapsulation strategies are described, and the MOFs are categorised according to the type of biomolecule they are able to encapsulate. The research field of HPMOFs has witnessed tremendous development recently. Their intriguing features and potential applications attract researchers' interest and promise an auspicious future for this class of highly porous materials.

Programmable Photoluminescence via Intrinsic and DNA-Fluorophore Association in a Mixed Cluster Heterometallic MOF

A rapid and facile design strategy to create a highly complex optical tag with programmable, multimodal photoluminescent properties is described. This was achieved via intrinsic and DNA-fluorophore hidden signatures. As a first covert feature of the tag, an intricate novel heterometallic near-infrared (NIR)-emitting mesoporous metal-organic framework (MOF) was designed and synthesized. The material is constructed from two chemically distinct, homometallic hexanuclear clusters based on Nd and Yb. Uniquely, the Nd-based cluster is observed here for the first time in a MOF and consists of two staggered Nd μ₃-oxo trimers. To generate controlled, multimodal, and tailorable emission with difficult to counterfeit features, the NIR-emissive MOF was post-synthetically modified via a fluorescent DNA oligo labeling design strategy. The surface attachment of several distinct fluorophores, including the simultaneous attachment of up to three distinct fluorescently labeled oligos was achieved, with excitation and emission properties across the visible spectrum (480-800 nm). The DNA inclusion as a secondary covert element in the tag was demonstrated via the detection of SYBR Gold dye association. Importantly, the approach implemented here serves as a rapid and tailorable way to encrypt distinct information in a facile and modular fashion and provides an innovative technology in the quest toward complex optical tags.

Ratiometric fluorescent sensor based on 2D MOF nanosheets modified by DNA for sensitive detection of Hg2

Mercury is highly toxic and can accumulate throughout the food cycle, leading to water contamination and foodstuffs pollution. Therefore, increasing attention has been paid to explore effective detection of Hg²⁺. Here, we report a sensitive Hg²⁺sensor based on single-stranded DNA (ssDNA) modified two-dimensional (2D) MOF nanosheets by a ratiometric fluorescent method. The chosen 2D MOF nanosheets possess intrinsic peroxidase-like catalytic ability, ssDNA adsorption and fluorescence quenching. We demonstrate that the adsorption of ssDNA can significantly improve the peroxidase mimetic activity of 2D MOF nanosheets, enhancing the fluorescence of substrate Amplex Red. Taking advantages of the favorable characteristics above, we fabricate an efficient Hg²⁺sensor. In the presence of Hg²⁺, the ssDNA is released from 2D MOF nanosheets, which results in a decreasing of peroxidase mimetic activity of 2D MOF nanosheets and a fluorescence enhancement of attached fluorophore. A linear relationship between ratiometric fluorescence of substrate and fluorophore and Hg²⁺concentrations is obtained. The detection limit is 5 nM, which is much lower than the maximal contamination level in drinking water (30 nM) by Word Health Organization. These findings show 2D MOF based ratiometric fluorescent sensor is a convenient and efficient strategy to detect Hg²⁺.

Porous organic cage for enantiomeric fluorescence recognition of amino acid and hydroxy acid

A new method based on the enantioselective recognition of porous organic cages CC3-R was established for the first time. Porous organic cages are widely used for separation, adsorption and host-guest interaction sensing, but are rarely used for fluorescence sensing. Based on the inherent chiral environment of CC3-R and the inherent fluorescence properties of the organic ligands constituting the cage, when different chiral monomers diffuse into the cage, different effects occur to produce changes in fluorescence. We found for the first time that the fluorescence of CC3-R can be enhanced and quenched by tyrosine and mandelic acid, respectively, and that different chiral monomers are enhanced or quenched differently at the same concentration. Unlike the chiral recognition of other composite luminescent materials, the chiral porous organic cage not only utilizes its own host-guest effect for chiral recognition, but also utilizes the organic ligands constituting the cage for luminescence recognition. This work provides an alternative method to accomplish chiral recognition other than chromatography, that is using porous organic cages (POC), but it can show the advantages of simplicity, low cost and high sensitivity. We believe this work could provide valuable thoughts in the exploration of POC in chiral recognition as new FL probes for the future.

Development of Lectin Modified Fluorescent Magnetic Particles for Highly Sensitive Detection of Glycoconjugates

I conducted this study to develop an improved method for glycome detection using fluorescent magnetic beads, whose surfaces were modified using lectins, for the highly sensitive detection of saccharides or glycoproteins via fluorescence quenching using a novel fluorescence emitter and quencher pair. The emitter (Cy3 fluorophore) was incorporated into magnetic beads, and a fluorescence quencher (cyanopyranyl group) was bound to glycomes via covalent bonding. The fluorescence intensities of fluorescent magnetic beads containing lectins decreased specifically in the presence of glycomes, which was a result of fluorescence quenching from Cy3 to cyanopyranyl groups due to the formation of a stable complex between lectins and glycome. Fluorescence intensities were plotted as a function of glycoprotein concentration, and good linear relationships were observed. This method enabled the fluorescent reading-out of a series of lectin-glycome interactions on the basis of recognition selectivity and affinity of immobilized lectins without tedious washing processes. Moreover, a simple profiling process was performed using this assay for diverse glycoconjugates, which not only included simple saccharides but also glycoproteins and glycome in cell lysates. These results clearly indicate that the combination of magnetic beads with the novel emitter-quencher pair enabled the highly sensitive detection of lectin-glycome interactions.

Highly Sensitive and Selective Detection Toward Melamine in Dairy Product by Turn-On Fluorescence of Ultrathin Graphitic Carbon Nitride Nanosheet

It is meaningful and promising to develop a practical sensor toward melamine in dairy products with high sensitivity and selectivity. However, complicated composition and environment in milk necessitate stable luminophore as sensor with excellent photophysical properties. Herein, ultrathin graphitic carbon nitride nanosheet (CNNS) is prepared via successive thermal polymerization and acid exfoliation. The photophysical property of CNNS states its strong ultraviolet absorption and intense blue-light emission. Noteworthily, the CNNS could act as a chemo-sensor to detect trace melamine in dairy products. The high stability, eminent sensitivity, powerful selectivity and competitiveness substantiates that this CNNS luminophore is a promising sensor for melamine in dairy products, being of potentially practical value on monitoring milk quality.

Progress in Metal-Organic Frameworks Facilitated Mercury Detection and Removal

Metal Organic Frameworks (MOFs) are noted as exceptional candidates towards the detection and removal of specific analytes. MOFs were reported in particular for the detection/removal of environmental contaminants, such as heavy metal ions, toxic anions, hazardous gases, explosives, etc. Among heavy metal ions, mercury has been noted as a global hazard because of its high toxicity in the elemental (Hg0), divalent cationic (Hg2+), and methyl mercury (CH3Hg+) forms. To secure the environment and living organisms, many countries have imposed stringent regulations to monitor mercury at all costs. Regarding the detection/removal requirements of mercury, researchers have proposed and reported all kinds of MOFs-based luminescent/non-luminescent probes towards mercury. This review provides valuable information about the MOFs which have been engaged in detection and removal of elemental mercury and Hg2+ ions. Moreover, the involved mechanisms or adsorption isotherms related to sensors or removal studies are clarified for the readers. Finally, advantages and limitations of MOFs in mercury detection/removal are described together with future scopes.

Stepping stones to the future of haemoglobin-based blood products: clinical, preclinical and innovative examples

Critical overview of the different oxygen therapeutics developed so far to be used when donor blood is not available.

Development of Magnetic Nanobeads Modified by Artificial Fluorescent Peptides for the Highly Sensitive and Selective Analysis of Oxytocin

We describe two novel fluorescent peptides (compounds 1 and 2) targeting oxytocin with a boron-dipyrromethenyl group as the fluorophore bound to an artificial peptide based on the oxytocin receptor, and their application for the analysis of oxytocin levels in human serum using nanometer-sized magnetic beads modified by fluorescent peptides (FMB-1 and FMB-2). Under the optimized experimental protocols, FMB-1 and FMB-2 emitted low levels of fluorescence but emitted much higher levels of fluorescence when associated with oxytocin. The detection limit of oxytocin by FMB-2 was 0.4 pM, which is approximately 37.5 times higher than that of conventional methods, such as ELISA. Using these fluorescent sensors, oxytocin was specifically detected over a wide linear range with high sensitivity, good reusability, stability, precision, and reproducibility. This fluorescent sensor-based detection system thus enabled the measurement of oxytocin levels in human serum, which has widespread applications for oxytocin assays across varied research fields.

Haemoglobin-loaded metal organic framework-based nanoparticles camouflaged with a red blood cell membrane as potential oxygen delivery systems

Metal organic frameworks are used to protect hemoglobin from denaturation thus preserving its excellent oxygen-binding and releasing properties. Decorating with cell membranes minimizes protein adsorption holding potential for long circulation.