Bio-electrospraying primary cardiac cells: in vitro tissue creation and functional study

Advancements and Future Perspectives in Cell Electrospinning and Bio-Electrospraying

In recent years, researchers have tried to include living cells into electrospun nanofibers or droplets, leading to the field of live cell electrospinning and bio-electrospraying . In live cell electrospinning and bio-electrospraying, cells are embedded in a polymer and subject to the process of mechanical and electrical stimulation of the process. The resulting nanofiber mats or droplets with embedded cells have several potential applications in tissue engineering. The nanofiber structure provides a supportive and porous environment for cells to grow and interact with their surroundings. This can be favorable for tissue regeneration, where the goal is to create functional tissues that closely mimic the extracellular matrix. However, there are also challenges associated with live cell electrospinning and electrospraying, including maintaining cell viability and uniform cell distribution within the nanofiber mat. Additionally, the electrospinning/electrospraying process can have an impact on cell behavior, phenotype, and genotype, which must be cautiously monitored and studied. Overall, the goal of this review paper is to provide a comprehensive and critical analysis of the existing literature on cell electrospinning and bio-electrospraying.

Bio-electrospraying assessment toward in situ chondrocyte-laden electrospun scaffold fabrication

Electrospinning has been widely used to fabricate fibrous scaffolds for cartilage tissue engineering, but their small pores severely restrict cell infiltration, resulting in an uneven distribution of cells across the scaffold, particularly in three-dimensional designs. If bio-electrospraying is applied, direct chondrocyte incorporation into the fibers during electrospinning may be a solution. However, before this approach can be effectively employed, it is critical to identify whether chondrocytes are adversely affected. Several electrospraying operating settings were tested to determine their effect on the survival and function of an immortalized human chondrocyte cell line. These chondrocytes survived through an electric field formed by low needle-to-collector distances and low voltage. No differences in chondrocyte viability, morphology, gene expression, or proliferation were found. Preliminary data of the combination of electrospraying and polymer electrospinning disclosed that chondrocyte integration was feasible using an alternated approach. The overall increase in chondrocyte viability over time indicated that the embedded cells retained their proliferative capacity. Besides the cell line, primary chondrocytes were also electrosprayed under the previously optimized operational conditions, revealing the higher sensitivity degree of these cells. Still, their post-electrosprayed viability remained considerably high. The data reported here further suggest that bio-electrospraying under the optimal operational conditions might be a promising alternative to the existent cell seeding techniques, promoting not only cells safe delivery to the scaffold, but also the development of cellularized cartilage tissue constructs.

Electrohydrodynamic atomisation driven design and engineering of opportunistic particulate systems for applications in drug delivery, therapeutics and pharmaceutics

Electrohydrodynamic atomisation (EHDA) technologies have evolved significantly over the past decade; branching into several established and emerging healthcare remits through timely advances in the engineering sciences and tailored conceptual process designs. More specifically for pharmaceutical and drug delivery spheres, electrospraying (ES) has presented itself as a high value technique enabling a plethora of different particulate structures. However, when coupled with novel formulations (e.g. co-flows) and innovative device aspects (e.g., materials and dimensions), core characteristics of particulates are manipulated and engineered specifically to deliver an application driven need, which is currently lacking, ranging from imaging and targeted delivery to controlled release and sensing. This demonstrates the holistic nature of these emerging technologies; which is often overlooked. Parametric driven control during particle engineering via the ES method yields opportunistic properties when compared to conventional methods, albeit at ambient conditions (e.g., temperature and pressure), making this extremely valuable for sensitive biologics and molecules of interest. Furthermore, several processing (e.g., flow rate, applied voltage and working distance) and solution (e.g., polymer concentration, electrical conductivity and surface tension) parameters impact ES modes and greatly influence the production of resulting particles. The formation of a steady cone-jet and subsequent atomisation during ES fabricates particles demonstrating monodispersity (or near monodispersed), narrow particle size distributions and smooth or textured morphologies; all of which are successfully incorporated in a one-step process. By following a controlled ES regime, tailored particles with various intricate structures (hollow microspheres, nanocups, Janus and cell-mimicking nanoparticles) can also be engineered through process head modifications central to the ES technique (single-needle spraying, coaxial, multi-needle and needleless approaches). Thus, intricate formulation design, set-up and combinatorial engineering of the EHDA process delivers particulate structures with a multitude of applications in tissue engineering, theranostics, bioresponsive systems as well as drug dosage forms for specific delivery to diseased or target tissues. This advanced technology has great potential to be implemented commercially, particularly on the industrial scale for several unmet pharmaceutical and medical challenges and needs. This review focuses on key seminal developments, ending with future perspectives addressing obstacles that need to be addressed for future advancement.

Recent advances on 3D printing of patient-specific implants for fibrocartilage tissue regeneration

Fibrocartilage is a very peculiar type of tissue found in intervertebral disc and meniscus. It is characterized by its avascular nature and for the shear and compressive forces that it can be subjected to. The number of individuals affected by the degeneration of fibrocartilaginous tissues has been growing and the poor outcomes of current treatments have led to an increased interest in new alternative approaches. Therefore, the combination of reverse engineering with 3D printing has been extensively explored in order to produce patient-specific implants capable of improving the current clinical outcomes. This review outlines the recent advances achieved in the tissue engineering field, especially focusing on fibrocartilaginous tissue.

Recyclable Saccharomyces cerevisiae loaded nanofibrous mats with sandwich structure constructing via bio-electrospraying for heavy metal removal

Biosorbents, such as algae and yeast, have been applied in heavy metal adsorption due to their low cost and efficacy. However, they cannot be recycled and reused after direct application, which may cause a secondary pollution. In this study, we used bio-electrospraying technique to immobilize Saccharomyces cerevisiae (a byproduct from food fermentation) onto the surface of poly(ε-caprolactone)/chitosan/rectorite ternary composites based nanofibrous mats. This technique not only combined the advantages of both S. cerevisiae (cheap) and nanofibers (large surface area) in heavy metal removal, but also made biosorbents easy to recollect and reuse. Layer-by-layer structured nanofibrous mats were also fabricated by alternating electrospinning and bio-electrospraying for a couple of times and loaded more S. cerevisiae for enhancing heavy metal biosorption. The morphology of S. cerevisiae loaded nanofibrous mats with different numbers of layers was observed. Biosorption assay was performed on PbNO₃ solution under different pH values, contact time, initial concentrations of Pb²⁺ and biosorbents weights, at last the elemental composition was measured before and after biosorption. The results showed that S. cerevisiae loaded nanofibrous mats had a biosorption capacity of Pb²⁺ up to 238mg/g. Desorption assay indicated that these mats were reusable and maintained high biosorption capacity after three biosorption-desorption cycles.

Controlled single-cell deposition and patterning by highly flexible hollow cantilevers

Single-cell patterning represents a key approach to decouple and better understand the role and mechanisms of individual cells of a given population. In particular, the bottom-up approach of engineering neuronal circuits with a controlled topology holds immense promises to perceive the relationships between connectivity and function. In order to accommodate these efforts, highly flexible SU-8 cantilevers with integrated microchannels have been fabricated for both additive and subtractive patterning. By directly squeezing out single cells onto adhesive surfaces, controlled deposition with a spatial accuracy of 5 μm could be achieved, while subtractive patterning has been realized by selective removal of targeted single cells. Complex cell patterns were created on substrates pre-patterned with cell-adhesive and repulsive areas, preserving the original pattern geometry for long-term studies. For example, a circular loop with a diameter of 530 μm has been realized using primary hippocampal neurons, which were fully connected to their respective neighbors along the loop. Using the same cantilevers, the versatility of the technique has also been demonstrated via in situ modification of already mature neuronal cultures by both detaching individual cells of the population and adding fresh ones, incorporating them into the culture.

3D Printing of Scaffolds for Tissue Regeneration Applications

The current need for organ and tissue replacement, repair, and regeneration for patients is continually growing such that supply is not meeting demand primarily due to a paucity of donors as well as biocompatibility issues leading to immune rejection of the transplant. In order to overcome these drawbacks, scientists have investigated the use of scaffolds as an alternative to transplantation. These scaffolds are designed to mimic the extracellular matrix (ECM) by providing structural support as well as promoting attachment, proliferation, and differentiation with the ultimate goal of yielding functional tissues or organs. Initial attempts at developing scaffolds were problematic and subsequently inspired an interest in 3D printing as a mode for generating scaffolds. Utilizing three-dimensional printing (3DP) technologies, ECM-like scaffolds can be produced with a high degree of complexity, where fine details can be included at a micrometer level. In this Review, the criteria for printing viable and functional scaffolds, scaffolding materials, and 3DP technologies used to print scaffolds for tissue engineering are discussed. Creating biofunctional scaffolds could potentially help to meet the demand by patients for tissues and organs without having to wait or rely on donors for transplantation.

Electrohydrodynamic atomization: A two-decade effort to produce and process micro-/nanoparticulate materials

Electrohydrodynamic atomization (EHDA), also called electrospray technique, has been studied for more than one century. However, since 1990s it has begun to be used to produce and process micro-/nanostructured materials. Owing to the simplicity and flexibility in EHDA experimental setup, it has been successfully employed to generate particulate materials with controllable compositions, structures, sizes, morphologies, and shapes. EHDA has also been used to deposit micro- and nanoparticulate materials on surfaces in a well-controlled manner. All these attributes make EHDA a fascinating tool for preparing and assembling a wide range of micro- and nanostructured materials which have been exploited for use in pharmaceutics, food, and healthcare to name a few. Our goal is to review this field, which allows scientists and engineers to learn about the EHDA technique and how it might be used to create, process, and assemble micro-/nanoparticulate materials with unique and intriguing properties. We begin with a brief introduction to the mechanism and setup of EHDA technique. We then discuss issues critical to successful application of EHDA technique, including control of composition, size, shape, morphology, structure of particulate materials and their assembly. We also illustrate a few of the many potential applications of particulate materials, especially in the area of drug delivery and regenerative medicine. Next, we review the simulation and modeling of Taylor cone-jet formation for a single and co-axial nozzle. The mathematical modeling of particle transport and deposition is presented to provide a deeper understanding of the effective parameters in the preparation, collection and pattering processes. We conclude this article with a discussion on perspectives and future possibilities in this field.

Engineering physical microenvironment for stem cell based regenerative medicine

Regenerative medicine has rapidly evolved over the past decade owing to its potential applications to improve human health. Targeted differentiations of stem cells promise to regenerate a variety of tissues and/or organs despite significant challenges. Recent studies have demonstrated the vital role of the physical microenvironment in regulating stem cell fate and improving differentiation efficiency. In this review, we summarize the main physical cues that are crucial for controlling stem cell differentiation. Recent advances in the technologies for the construction of physical microenvironment and their implications in controlling stem cell fate are also highlighted.

Cardiac tissue engineering: renewing the arsenal for the battle against heart disease

The development of therapies that lead to the regeneration or functional repair of compromised cardiac tissue is the most important challenge facing translational cardiovascular research today.

Polymeric scaffold aided stem cell therapeutics for cardiac muscle repair and regeneration

The constantly expanding repository of novel polymers and stem cells has opened up new vistas in the field of cardiac tissue engineering. Successful regeneration of the complex cardiac tissue mainly centres on the appropriate scaffold material with topographical features that mimic the native environment. The integration of stem cells on these scaffolds is expected to enhance the regeneration potential. This review elaborates on the interplay of these vital factors in achieving the functional cardiac tissue. The recent advances in polymers, nanocomposites, and stem cells from different sources are highlighted. Special emphasis is laid on the clinical trials involving stem cells and the state-of-the-art materials to obtain a balanced perspective on the translational potential of this strategy.

Bio-electrospraying and cell electrospinning: progress and opportunities for basic biology and clinical sciences

Engineering of functional tissues is a fascinating and fertile arena of research and development. This flourishing enterprise weaves together many areas of research to tackle the most complex question faced to date, namely how to design and reconstruct a synthetic three-dimensional fully functional tissue on demand. At present our healthcare is under threat by several social and economical issues together with those of a more scientific and clinical nature. One such issue arises from our increasing life expectancy, resulting in an ageing society. This steeply growing ageing society requires functional organotypic tissues on demand for repair, replacement, and rejuvenation (R(3) ). Several approaches are pioneered and developed to assist conventional tissue/organ transplantation. In this Progress Report, "non-contact jet-based" approaches for engineering functional tissues are introduced and bio-electrosprays and cell electrospinning, i.e., biotechniques that have demonstrated as being benign for directly handling living cells and whole organisms, are highlighted. These biotechniques possess the ability to directly handle heterogeneous cell populations as suspensions with a biopolymer and/or other micro/nanomaterials for directly forming three-dimensional functional living reconstructs. These discoveries and developments have provided a promising biotechnology platform with far-reaching ramifications for a wide range of applications in basic biological laboratories to their utility in the clinic.