Electrospun Nanofibrous Meshes Cultured With Wharton's Jelly Stem Cell: An Alternative for Cartilage Regeneration, Without the Need of Growth Factors

Diaphragmatic hernia repair porcine model to compare the performance of biodegradable membranes against Gore-Tex®

BACKGROUND

Patch repair of congenital diaphragmatic hernia (CDH) using Gore-Tex® is associated with infection, adhesions, hernia recurrence, long-term musculoskeletal sequels and poor tissue regeneration. To overcome these limitations, the performance of two novel biodegradable membranes was tested to repair CDH in a growing pig model.

METHODS

Twelve male pigs were randomly assigned to 3 different groups of 4 animals each, determined by the type of patch used during thoracoscopic diaphragmatic hernia repair (Gore-Tex®, polycaprolactone electrospun membrane-PCLem, and decellularized human chorion membrane-dHCM). After 7 weeks, all animals were euthanized, followed by necropsy for diaphragmatic evaluation and histological analysis.

RESULTS

Thoracoscopic defect creation and diaphragmatic repair were performed without any technical difficulty in all groups. However, hernia recurrence rate was 0% in Gore-Tex®, 50% in PCLem and 100% in dHCM groups. At euthanasia, Gore-Tex® patches appeared virtually unchanged and covered with a fibrotic capsule, while PCLem and dHCM patches were replaced by either floppy connective tissue or vascularized and floppy regenerated membranous tissue, respectively.

CONCLUSION

Gore-Tex® was associated with a higher survival rate and lower recurrence. Nevertheless, the proposed biodegradable membranes were associated with better tissue integration when compared with Gore-Tex®.

Human umbilical cord mesenchymal stem cells promoting knee joint chondrogenesis for the treatment of knee osteoarthritis: a systematic review

PURPOSE

The onset of OA is affected by a variety of factors, which eventually lead to the loss of cartilage in the joints, the formation of osteophytes, the loss of normal knee mobility, and pain and discomfort, which seriously affects the quality of life. HUC-MSCs can promote cartilage production and have been widely used in research in the past decade. This article systematically summarizes that it is well used in basic research and clinical studies to promote inflammatory chondrogenesis in the treatment of OA. Provide a theoretical basis for clinical treatment.

PATIENTS AND METHODS

This study collected CNKI, Wanfang, PubMed, and articles related to the treatment of OA with HUC-MSCs since their publication, excluding non-basic and clinical studies such as reviews and meta-analysis. A total of 31 basic experimental studies and 12 clinical studies were included. Systematically analyze the effects of HUC-MSCs on inhibiting inflammatory factors, promoting chondrocyte production, and current clinical treatment.

RESULTS

HUC-MSCs can reduce inflammatory factors such as MMP-13, ADAMTS-5, IL-1β, IL-1, IL-6, TNF-α, induced conversion from M1 to M2 in OA to protect cartilage damage and reduce OA inflammation. Synthesize ColII, SOX9, and aggrecan at the same time to promote cartilage synthesis.

CONCLUSION

HUC-MSCs not only have typical stem cell biological characteristics, but also have rich sources and convenient material extraction. Compared with stem cells from other sources, HUC-MSCs have stronger proliferation, differentiation, and immune regulation abilities. Furthermore, there are no ethical issues associated with their use.

SAFETY

Primarily attributed to pain, the majority of individuals experience recovery within 24 h following injection. HUC-MSCs possess the ability to alleviate pain, enhance knee joint function, and potentially postpone the need for surgical intervention in both non-surgical and other cases, making them highly deserving of clinical promotion and application.

Particulate kidney extracellular matrix: bioactivity and proteomic analysis of a novel scaffold from porcine origin

Decellularized matrices are attractive substrates, being able to retain growth factors and proteins present in the native tissue. Several biomaterials can be produced by processing these matrices. However, new substrates capable of being injected that reverse local kidney injuries are currently scarce. Herein, we hypothesized that the decellularized particulate kidney porcine ECM (pKECM) could support renal progenitor cell cultures for posterior implantation. Briefly, kidneys are cut into pieces, decellularized by immersion on detergent solutions, lyophilized and reduced into particles. Then, ECM particles are analyzed for nuclear material remaining by DNA quantification and histological examination, molecular conformation by FITR and structural morphology by SEM. Protein extraction is also optimized for posterior identification and quantification by mass spectrometry. The results obtained confirm the collagenous structure and composition of the ECM, the effective removal of nucleic material and the preservation of ECM proteins with great similarity to human kidneys. Human renal progenitor cells (hRPCs) are seeded in different ratios with pKECM, on 3D suspensions. The conducted assays for cell viability, proliferation and distribution over 7 days of culture suggest that these matrices as biocompatible and bioactive substrates for hRPCs. Also, by analyzing CD133 expression, an optimal ratio for specific phenotypic expression is revealed, demonstrating the potential of these substrates to modulate cellular behavior. The initial hypothesis of developing and characterizing a particulate ECM biomaterial as a consistent substrate for 3D cultures is successfully validated. The findings in this manuscript suggest these particles as valuable tools for regenerative nephrology by minimizing surgeries and locally reversing small injuries which can lead to chronic renal disfunction.

Electrospun Polymers in Cartilage Engineering-State of Play

Articular cartilage defects remain a clinical challenge. Articular cartilage defects progress to osteoarthritis, which negatively (e.g., remarkable pain, decreased mobility, distress) affects millions of people worldwide and is associated with excessive healthcare costs. Surgical procedures and cell-based therapies have failed to deliver a functional therapy. To this end, tissue engineering therapies provide a promise to deliver a functional cartilage substitute. Among the various scaffold fabrication technologies available, electrospinning is continuously gaining pace, as it can produce nano- to micro- fibrous scaffolds that imitate architectural features of native extracellular matrix supramolecular assemblies and can deliver variable cell populations and bioactive molecules. Herein, we comprehensively review advancements and shortfalls of various electrospun scaffolds in cartilage engineering.

Recent progress in the fabrication techniques of 3D scaffolds for tissue engineering

Significant advances have been made in the field of tissue engineering (TE), especially in the synthesis of three-dimensional (3D) scaffolds for replacing damaged tissues and organs in laboratory conditions. However, the gaps in knowledge in exploiting these techniques in preclinical trials and beyond and, in particular, in practical scenarios (e.g., replacing real body organs) have not been discussed well in the existing literature. Furthermore, it is observed in the literature that while new techniques for the synthesis of 3D TE scaffold have been developed, some of the earlier techniques are still being used. This implies that the advantages offered by a more recent and advanced technique as compared to the earlier ones are not obvious, and these should be discussed in detail. For example, one needs to be aware of the reason, if any, behind the superiority of traditional electrospinning technique over recent advances in 3D printing technique for the production of 3D scaffolds given the popularity of the former over the latter, indicated by the number of publications in the respective areas. Keeping these points in mind, this review aims to demonstrate the ongoing trend in TE based on the scaffold fabrication techniques, focusing mostly, on the two most widely used techniques, namely, electrospinning and 3D printing, with a special emphasis on preclinical trials and beyond. In this context, the advantages, disadvantages, flexibilities and limitations of the relevant techniques (electrospinner and 3D printer) are discussed. The paper also critically analyzes the applicability, restrictions, and future demands of these techniques in TE including their applications in generating whole body organs. It is concluded that combining these knowledge gaps with the existing body of knowledge on the preparation of laboratory scale 3D scaffolds, would deliver a much better understanding in the future for scientists who are interested in these techniques.

The relationship between substrate topography and stem cell differentiation in the musculoskeletal system

It is well known that biomaterial topography can exert a profound influence on various cellular functions such as migration, polarization, and adhesion. With the development and refinement of manufacturing technology, much research has recently been focused on substrate topography-induced cell differentiation, particularly in the field of tissue engineering. Even without biological and chemical stimuli, the differentiation of stem cells can also be initiated by various biomaterials with different topographic features. However, the underlying mechanisms of this biological phenomenon remain elusive. During the past few decades, many researchers have demonstrated that cells can sense the topography of materials through the assembly and polymerization of membrane proteins. Following the activation of RHO, TGF-b or FAK signaling pathways, cells can be induced into various differentiation states. But these signaling pathways often coincide with canonical mechanical transduction pathways, and no firm conclusion has been reached among researchers in this field on topography-specific signaling pathways. On the other hand, some substrate topographies are reported to have the ability to inhibit differentiation and maintain the 'stemness' of stem cells. In this review, we will summarize the role of topography in musculoskeletal system regeneration and explore possible topography-related signaling pathways involved in cell differentiation.

Advances in Regenerative Medicine and Tissue Engineering: Innovation and Transformation of Medicine

Humans and animals lose tissues and organs due to congenital defects, trauma, and diseases. The human body has a low regenerative potential as opposed to the urodele amphibians commonly referred to as salamanders. Globally, millions of people would benefit immensely if tissues and organs can be replaced on demand. Traditionally, transplantation of intact tissues and organs has been the bedrock to replace damaged and diseased parts of the body. The sole reliance on transplantation has created a waiting list of people requiring donated tissues and organs, and generally, supply cannot meet the demand. The total cost to society in terms of caring for patients with failing organs and debilitating diseases is enormous. Scientists and clinicians, motivated by the need to develop safe and reliable sources of tissues and organs, have been improving therapies and technologies that can regenerate tissues and in some cases create new tissues altogether. Tissue engineering and/or regenerative medicine are fields of life science employing both engineering and biological principles to create new tissues and organs and to promote the regeneration of damaged or diseased tissues and organs. Major advances and innovations are being made in the fields of tissue engineering and regenerative medicine and have a huge impact on three-dimensional bioprinting (3D bioprinting) of tissues and organs. 3D bioprinting holds great promise for artificial tissue and organ bioprinting, thereby revolutionizing the field of regenerative medicine. This review discusses how recent advances in the field of regenerative medicine and tissue engineering can improve 3D bioprinting and vice versa. Several challenges must be overcome in the application of 3D bioprinting before this disruptive technology is widely used to create organotypic constructs for regenerative medicine.

Advances in stem cell therapy for cartilage regeneration in osteoarthritis

INTRODUCTION

Osteoarthritis (OA) is a progressive joint disease that compromises the structural integrity of cartilage tissue. Conventional treatments based on medication or surgery are nowadays inefficient and cell-based therapy has emerged as one of the most promising methods for cartilage regeneration. The first therapy developed for cartilage defects was autologous chondrocyte implantation, but in the last few decades stem cells (SCs) from different sources have been proposed as a possible alternative for OA.

AREAS COVERED

SC sources and available delivery procedures (scaffolds/hydrogels) are presented, along with the main issues arisen in this regard. Thereafter, preclinical and clinical trials performed in recent years are reviewed in order to take a glance toward the potential benefits that such therapies could deliver to the patients.

EXPERT OPINION

SCs have proven their potential and safety for OA treatment. Nevertheless, there are still many questions to be resolved before their widespread used in clinical practice, such as the treatment mechanism, the best cell source, the most appropriate processing method, the most effective dose and delivery procedure, and their efficacy. In this sense, long-term follow-up and larger randomized controlled trials utilizing standardized and established outcome scores are mandatory to make objective conclusions.

The Use of Electrospinning Technique on Osteochondral Tissue Engineering

Electrospinning, an electrostatic fiber fabrication technique, has attracted significant interest in recent years due to its versatility and ability to produce highly tunable nanofibrous meshes. These nanofibrous meshes have been investigated as promising tissue engineering scaffolds since they mimic the scale and morphology of the native extracellular matrix. The sub-micron diameter of fibers produced by this process presents various advantages like the high surface area to volume ratio, tunable porosity, and the ability to manipulate the nanofiber composition in order to get desired properties and functionality. Electrospun fibers can be oriented or arranged randomly, giving control over both mechanical properties and the biological response to the fibrous scaffold. Moreover, bioactive molecules can be integrated with the electrospun nanofibrous scaffolds in order to improve the cellular response. This chapter presents an overview of the developments on electrospun polymer nanofibers including processing, structure, and their applications in the field of osteochondral tissue engineering.