Complete or periodic continuity in continuous manufacturing platforms for production of monoclonal antibodies?

Host cell proteins in monoclonal antibody processing: Control, detection, and removal

Host cell proteins (HCPs) are process-related impurities in a therapeutic protein expressed using cell culture technology. This review presents biopharmaceutical industry trends in terms of both HCPs in the bioprocessing of monoclonal antibodies (mAbs) and the capabilities for HCP clearance by downstream unit operations. A comprehensive assessment of currently implemented and emerging technologies in the manufacturing processes with extensive references was performed. Meta-analyses of published downstream data were conducted to identify trends. Improved analytical methods and understanding of "high-risk" HCPs lead to more robust manufacturing processes and higher-quality therapeutics. The trend of higher cell density cultures leads to both higher mAb expression and higher HCP levels. However, HCP levels can be significantly reduced with improvements in operations, resulting in similar concentrations of approx. 10 ppm HCPs. There are no differences in the performance of HCP clearance between recent enhanced downstream operations and traditional batch processing. This review includes best practices for developing improved processes.

Reviewing the process intensification landscape through the introduction of a novel, multitiered classification for downstream processing

A demand for process intensification in biomanufacturing has increased over the past decade due to the ever-expanding market for biopharmaceuticals. This is largely driven by factors such as a surge in biosimilars as patents expire, an aging population, and a rise in chronic diseases. With these market demands, pressure upon biomanufacturers to produce quality products with rapid turnaround escalates proportionally. Process intensification in biomanufacturing has been well received and accepted across industry based on the demonstration of its benefits of improved productivity and efficiency, while also reducing the cost of goods. However, while these benefits have been shown empirically, the challenges of adopting process intensification into industry remain, from smaller independent start-up to big pharma. Traditionally, moving from batch to a process intensification scheme has been viewed as an "all or nothing" approach involving continuous bioprocessing, in which the factors of complexity and significant capital costs hinder its adoption. In addition, the literature is crowded with a variety of terms used to describe process intensification (continuous, periodic counter-current, connected, intensified, steady-state, etc.). Often, these terms are used inappropriately or as synonyms, which generates confusion in the field. Through a detailed review of current state-of-the-art systems, consumables, and process intensification case studies, we herein propose a defined approach in the implementation of downstream process intensification through a standardized nomenclature and viewing it as distinct independent levels. These can function separately as intensified single-unit operations or be built upon by integration with other process steps allowing for simple, incremental, cost-effective implementation of process intensification in the manufacturing of biopharmaceuticals.

Development of continuous processing platform utilizing aqueous two-phase extraction for purification of monoclonal antibodies

Monoclonal antibody downstream processing typically entails chromatography-based purification processes beginning with Protein A chromatography, accounting for 50 % of the total manufacturing expense. Alternatives to protein A chromatography have been explored by several researchers. In this paper, aqueous two-phase extraction (ATPE) has been proposed for continuous processing of monoclonal antibodies (mAbs) as an alternative to the traditional protein A chromatography. The PEG-sulfate system has been employed for phase formation in ATPE, and the mAb is separated in the salt phase, while impurities like high molecular weight (HMW) and host cell proteins (HCPs) are separated in the PEG phase. Following ATPE of clarified cell culture harvest, yield of ≥ 80 % and purity of ≥ 97 % were achieved in the salt phase. Considerable (28 %) reduction in consumable cost has been estimated when comparing the proposed platform to the traditional protein A based platform. The outcomes demonstrate that ATPE can be a potentially effective substitute for the traditional Protein A chromatography for purification of mAbs. The proposed platform offers easy implementation, delivers comparative results, and offers significantly better economics for manufacturing mAb-based biotherapeutics.

A novel method for continuous chromatographic separation of monoclonal antibody charge variants by combining displacement mode chromatography and step elution

Charge heterogeneity of monoclonal antibodies is considered a critical quality attribute and hence needs to be monitored and controlled by the manufacturer. Typically, this is accomplished via separation of charge variants on cation exchange chromatography (CEX) using a pH or conductivity based linear gradient elution. Although an effective approach, this is challenging particularly during continuous processing as creation of linear gradient during continuous processing adds to process complexity and can lead to deviations in product quality upon slightest changes in gradient formation. Moreover, the long length of elution gradient along with the required peak fractionation makes process integration difficult. In this study, we propose a novel approach for separation of charge variants during continuous CEX chromatography by utilizing a combination of displacement mode chromatography and salt-based step elution. It has been demonstrated that while the displacement mode of chromatography enables control of acidic variants ≤26% in the CEX eluate, salt-based step gradient elution manages basic charge variant ≤25% in the CEX eluate. The proposed approach has been successfully demonstrated using feed materials with varying compositions. On comparing the designed strategy with 2-column concurrent (CC) chromatography, the resin specific productivity increased by 95% and resin utilization increased by 183% with recovery of main species >99%. Further, in order to showcase the amenability of the designed CEX method in continuous operation, the method was examined in our in-house continuous mAb platform.

Current challenges and recent advances on the path towards continuous biomanufacturing

Continuous biopharmaceutical manufacturing is currently a field of intense research due to its potential to make the entire production process more optimal for the modern, ever-evolving biopharmaceutical market. Compared to traditional batch manufacturing, continuous bioprocessing is more efficient, adjustable, and sustainable and has reduced capital costs. However, despite its clear advantages, continuous bioprocessing is yet to be widely adopted in commercial manufacturing. This article provides an overview of the technological roadblocks for extensive adoptions and points out the recent advances that could help overcome them. In total, three key areas for improvement are identified: Quality by Design (QbD) implementation, integration of upstream and downstream technologies, and data and knowledge management. First, the challenges to QbD implementation are explored. Specifically, process control, process analytical technology (PAT), critical process parameter (CPP) identification, and mathematical models for bioprocess control and design are recognized as crucial for successful QbD realizations. Next, the difficulties of end-to-end process integration are examined, with a particular emphasis on downstream processing. Finally, the problem of data and knowledge management and its potential solutions are outlined where ontologies and data standards are pointed out as key drivers of progress.

Role of the gradient slope during the product internal recycling for the multicolumn countercurrent solvent gradient purification of PEGylated proteins

Protein PEGylation, i.e. functionalization with poly(ethylene glycol) chains, has been demonstrated an efficient way to improve the therapeutic index of these biopharmaceuticals. We demonstrated that Multicolumn Countercurrent Solvent Gradient Purification (MCSGP) is an efficient process for the separation of PEGylated proteins (Kim et al., Ind. and Eng. Chem. Res. 2021, 60, 29, 10764-10776), thanks to the internal recycling of product-containing side fractions. This recycling phase plays a critical role in the economy of MCSGP as it avoids wasting valuable product, but at the same time impacts its productivity extending the overall process duration. In this study, our aim is to elucidate the role of the gradient slope within this recycling stage on the yield and productivity of MCSGP for two case-studies: PEGylated lysozyme and an industrially relevant PEGylated protein. While all the examples of MCSGP in the literature refer to a single gradient slope in the elution phase, for the first time we systematically investigate three different gradient configurations: i) a single gradient slope throughout the entire elution, ii) recycling with an increased gradient slope, to shed light on the competition between volume of the recycled fraction and required inline dilution and iii) an isocratic elution during the recycling phase. The dual gradient elution proved to be a valuable solution for boosting the recovery of high-value products, with the potential for alleviating the pressure on the upstream processing.

Digital twin of a continuous chromatography process for mAb purification: Design and model-based control

Model-based design of integrated continuous train coupled with online process analytical technology (PAT) tool can be a potent facilitator for monitoring and control of Critical Quality Attributes (CQAs) in real time. Charge variants are product related variants and are often regarded as CQAs as they may impact potency and efficacy of drug. Robust pooling decision is required for achieving uniform charge variant composition for mAbs as baseline separation between closely related variants is rarely achieved in process scale chromatography. In this study, we propose a digital twin of a continuous chromatography process, integrated with an online HPLC-PAT tool for delivering real time pooling decisions to achieve uniform charge variant composition. The integrated downstream process comprised continuous multicolumn capture protein A chromatography, viral inactivation in coiled flow inverter reactor (CFIR), and multicolumn CEX polishing step. An online HPLC was connected to the harvest tank before protein A chromatography. Both empirical and mechanistic modeling have been considered. The model states were updated in real time using online HPLC charge variant data for prediction of the initial and final cut point for CEX eluate, according to which the process chromatography was directed to switch from collection to waste to achieve the desired charge variant composition in the CEX pool. Two case studies were carried out to demonstrate this control strategy. In the first case study, the continuous train was run for initially 14 h for harvest of fixed charge variant composition as feed. In the second case study, charge variant composition was dynamically changed by introducing forced perturbation to mimic the deviations that may be encountered during perfusion cell culture. The control strategy was successfully implemented for more than ±5% variability in the acidic variants of the feed with its composition in the range of acidic (13%-17%), main (18%-23%), and basic (59%-68%) variants. Both the case studies yielded CEX pool of uniform distribution of acidic, main and basic profiles in the range of 15 ± 0.8, 31 ± 0.3, and 53 ± 0.5%, respectively, in the case of empirical modeling and 15 ± 0.5, 31 ± 0.3, and 53 ± 0.3%, respectively, in the case of mechanistic modeling. In both cases, process yield for main species was >85% and the use of online HPLC early in the purification train helped in making quicker decision for pooling of CEX eluate. The results thus successfully demonstrate the technical feasibility of creating digital twins of bioprocess operations and their utility for process control.

Continuous manufacturing of monoclonal antibodies: Automated downstream control strategy for dynamic handling of titer variations

Handling long-term dynamic variability in harvest titer is a critical challenge in continuous downstream manufacturing. This challenge is becoming increasingly important with the advent of high-titer clones and modern upstream perfusion processes where the titer can vary significantly across the course of a campaign. In this paper, we present a strategy for real-time, dynamic adjustment of the entire downstream train, including capture chromatography, viral inactivation, depth filtration, polishing chromatography, and single-pass formulation, to accommodate variations in titer from 1-7 g/L. The strategy was tested in real time in a continuous downstream purification process of 36 h duration with induced titer variations. The dynamic control strategy leverages real-time NIR-based concentration sensors in the harvest material to continuously track the titer, integrated with an in-house Python-based control system that operates a BioSMB for carrying out capture and polishing chromatography, as well as a series of pumps and solenoid valves for carrying out viral inactivation and formulation. A set of 9 different methods, corresponding to the different harvest titers have been coded onto the Python controller. The methods have a varying number of chromatography columns (3-6 for Protein A and 2-10 for CEX), designed to ensure proper scheduling and optimize productivity across the entire titer variation space. The approach allows for a wide range of titers to be processed on a single integrated setup without having to change equipment or to re-design each time. The strategy also overcomes a key unexplored challenge in continuous processing, namely hand-shaking the downstream train to upstream conditions with long-term titer variability while maintaining automated operation with high productivity and robustness.

Converting a mAb downstream process from batch to continuous using process modeling and process analytical technology

The biopharmaceutical market is driving the revolution from traditional batch processes to continuous manufacturing for higher productivity and lower costs. In this work, a batch mAb downstream process has been converted into an integrated continuous process with the combination of multiple techniques. For process intensification, two batch mode unit operations (protein A capture chromatography, ultrafiltration/diafiltration) are converted into continuous ones; For continuity, surge tanks were used between adjacent steps, and level signals were used to trigger process start or stop, forming a holistic continuous process. For process automation, manual operations (e.g., pH and conductivity adjustment) were changed into automatic operation and load mass was controlled with process analytical technology (PAT). A model-based simulation was applied to estimate the loading conditions for the continuous capture process, resulting in 21% resin capacity utilization and 28% productivity improvement as compared to the batch process. Automatic load mass control of cation exchange chromatography was achieved through a customized in-line protein quantity monitoring system, with a difference of less than 1.3% as compared to off-line analysis. Total process time was shortened from 4 days (batch process) to less than 24 hours using the continuous downstream process with the overall productivity of 23.8 g mAb /day for the bench-scale system. Comparable yield and quality data were obtained in three test runs, indicating a successful conversion from a batch process to a continuous process. The insight of this work could be a reference to other similar situations. This article is protected by copyright. All rights reserved.

Enablers of continuous processing of biotherapeutic products

The benefits of continuous processing over batch manufacturing are widely acknowledged across the biopharmaceutical industry, primary of which are higher productivity and greater consistency in product quality. Furthermore, the reduced equipment and facility footprint lead to significantly lower capital costs. Technology enablers have a major role in this migration from batch to continuous processing. In this review, we highlight the various enablers that are facilitating adoption of continuous upstream and downstream bioprocessing. This includes new bioreactors and cell retention devices for upstream operations, and on-column and continuous flow refolding, novel continuous chromatography, and single-pass filtration systems for downstream processes. We also elucidate the significant roles of process integration and control as well as of data analytics in these processes.

Process analytical technology in continuous processing: Model-based real time control of pH between capture chromatography and viral inactivation for monoclonal antibody production

A real time mechanistic model-based control strategy is demonstrated for in-line pH adjustment post-capture chromatography and prior to viral inactivation for continuous processing of monoclonal antibodies. At this point in the process, tight control of pH is essential, as pH fluctuations above 3.5 can result in incomplete viral inactivation, while fluctuations below 3.5 can lead to significant aggregate formation. The present approach predicts the pH profile during the transition phase between chromatography wash and elution steps by modelling the process stream at the column outlet as a mixture of two independent buffer systems. Control of pH in this transition phase is a critical consideration in capture chromatography as a significant amount of mAb material is eluted at this time. The model inputs are buffer concentrations, flow rates, and theoretical pKa values, along with cleaning step conductivity profiles which are readily available from a typical process chromatography equipment. The utilization of the most recent cleaning cycle data as an input to the model allows sensitive calibration to the individual process at hand on a column-to-column basis. The model is able to accurately predict the pH profile throughout the elution, as well as calculate the flow rate of the acid (titrant) required at each time point to maintain the pH consistently at 3.5±0.2. The strategy is demonstrated for various buffers, columns, operating conditions, and process deviations in a three-column continuous process, and is a useful and simple approach for achieving robust control of pH at this critical point in the continuous train.