Structural characteristics and biological performance of silk fibroin nanofiber containing microalgae spirulina extract

Assessing the efficacy of curcumin-loaded alginate hydrogel on skin wound healing: A gene expression analysis

Skin tissue engineering has gained significant attention as a promising alternative to traditional treatments for skin injuries. In this study, we developed 3D hydrogel-based scaffolds, Alginate, incorporating different concentrations of Curcumin and evaluated their properties, including morphology, swelling behavior, weight loss, as well as hemo- and cytocompatibility. Furthermore, we investigated the therapeutic potential of Alginate hydrogel containing different amounts of Curcumin using an in vitro wound healing model. The prepared hydrogels exhibited remarkable characteristics, SEM showed that the pore size of hydrogels was 134.64 μm with interconnected pores, making it conducive for cellular infiltration and nutrient exchange. Moreover, hydrogels demonstrated excellent biodegradability, losing 63.5% of its weight over 14 days. In addition, the prepared hydrogels had a stable release of curcumin for 3 days. The results also show the hemocompatibility of prepared hydrogels and a low amount of blood clotting. To assess the efficacy of the developed hydrogels, 3T3 fibroblast growth was examined during various incubation times. The results indicated that the inclusion of Curcumin at a concentration of 0.1 mg/mL positively influenced cellular behavior. The animal study showed that Alginate hydrogel containing 0.1 mg/mL curcumin had high wound closure(more than 80%) after 14 days. In addition, it showed up-regulation of essential wound healing genes, including TGFβ1 and VEGF, promoting tissue repair and angiogenesis. Furthermore, the treated group exhibited down-regulation of MMP9 gene expression, indicating a reduction in matrix degradation and inflammation. The observed cellular responses and gene expression changes substantiate the therapeutic efficacy of prepared hydrogels. Consequently, our study showed the healing effect of alginate-based hydrogel containing Curcumin on skin injuries.

Comparison of the anticancer effect of microalgal oils and microalgal oil-loaded electrosprayed nanoparticles against PC-3, SHSY-5Y and AGS cell lines

Many of the bioactive substances used in pharmaceutical industry are easily affected by temperature, light and oxygen, and are easily degraded during storage and processing, and exhibit poor adsorption properties during digestion, which limits their direct use. Microalgae are rich in oils which have antimicrobial properties and antioxidants that attract attention in both food and pharmaceutical sectors in recent years. Studies to encapsulate bioactive compound-rich microalgae oils with nanotechnological approaches to improve the physical and chemical stability are relatively new, and it is promising to apply these approaches for pharmaceutical purposes. In this study, cytotoxic effects of oil extracts of Botryococcus braunii and Microcystis aeruginosa and their oil-loaded nanoparticles on L929 cell line, PC-3 prostate cell line, SHSY-5Y neuroblastoma cell line and AGS gastric adenocarcinoma cell line were investigated. The obtained extracts were found to have no cytotoxic effect on L929 cells. However, they showed cytotoxic effect on cancer cells. As for the nanoparticles; a gradual release was determined and the stability of the nanoparticle structure was shown. In the light of obtained findings, it was considered that nanoparticles produced with oil extracts of microalgae which have bioactive substances, have potential to be evaluated especially in pharmaceutical and cosmetic fields.

Preparation and characterization of silk fibroin/polyethylene oxide nanofiber membranes with antibacterial activity

Bacterial infection is among the most common diseases that threaten human health. Antibiotics are effective in treating bacterial infections. However, the overuse of antibiotics will lead to an increase in bacterial resistance. To reduce the overuse of antibiotics and improve the effective use of antibiotics through slow release, silk fibroin (SF)/polyethylene oxide (PEO) nanofiber membranes with different SF and PEO proportions were prepared by electrospinning. The ecofriendly solvent ethanol solution was used for electrospinning for better protection of antibiotic activity. The SEM showed that the surface of SF/PEO (2:8) and SF/PEO (3:7) was smoother and more uniform. With the increase of SF content, the thermal stability and hydrophilicity of SF/PEO nanofiber membranes were improved. The SF/PEO (3:7) nanofiber membrane had the best mechanical property and its maximum stress and strain were 4.6 1 ± 0.24 MPa and 16.36 ± 0.41%, respectively. Based on these good properties, SF/PEO (3:7) nanofiber membrane was chosen for loading and releasing gentamicin sulfate (GS). The fabricated (GS)/SF/PEO (3:7) nanofiber membrane exhibited good release efficiency and showed the good antibacterial activity against Staphylococcus aureus and Escherichia coli. These investigations indicated the GS/SF/PEO (3:7) nanofiber membrane (GS/SF/PEO) has a great potential for application in antibacterial materials.

Preparation of electrospun polycaprolactone nanofiber mats loaded with microalgal extracts

Sustainable, ecological, and biocompatible materials are emerging for the development of novel components for tissue engineering. Microalgae being one of the unique organisms on Earth to provide various novel compounds with certain bioactivities are also a good source for the development of novel tissue scaffold materials. In this study, electrospinning technique was utilized to fabricate nanofibers from polycaprolactone loaded with microalgal extracts obtained from Haematococcus pluvialis (vegetative and carotenoid producing form) and Chlorella vulgaris. The FTIR results showed that, blending microalgae with polycaprolactone give unique bands rooted from microalgae and polycaprolactone structure. The samples were not diversified from each other, however stable bands were observed. SEM analysis revealed a uniform fiber fabrication with an average diameter of 810 ± 55 nm independent from microalgal extracts. MTT assay was done on HUVEC cell lines and results showed that nanofiber mats helped cell proliferation with extended time. Biodegradation resulted with mineral accumulation on the surface of same samples however the fiber degradation was uniform. With slow but stable biodegradation characteristics, microalgal extract loaded nanofiber mats holds great potential to be novel tissue scaffold material.

Roughness and Fiber Fraction Dominated Wetting of Electrospun Fiber-Based Porous Meshes

Wettability of electrospun fibers is one of the key parameters in the biomedical and filtration industry. Within this comprehensive study of contact angles on three-dimensional (3D) meshes made of electrospun fibers and films, from seven types of polymers, we clearly indicated the importance of roughness analysis. Surface chemistry was analyzed with X-ray photoelectron microscopy (XPS) and it showed no significant difference between fibers and films, confirming that the hydrophobic properties of the surfaces can be enhanced by just roughness without any chemical treatment. The surface geometry was determining factor in wetting contact angle analysis on electrospun meshes. We noted that it was very important how the geometry of electrospun surfaces was validated. The commonly used fiber diameter was not necessarily a convincing parameter unless it was correlated with the surface roughness or fraction of fibers or pores. Importantly, this study provides the guidelines to verify the surface free energy decrease with the fiber fraction for the meshes, to validate the changes in wetting contact angles. Eventually, the analysis suggested that meshes could maintain the entrapped air between fibers, decreasing surface free energies for polymers, which increased the contact angle for liquids with surface tension above the critical Wenzel level to maintain the Cassie-Baxter regime for hydrophobic surfaces.

Enhancement of hemostatic property of plant derived oxidized nanocellulose-silk fibroin based scaffolds by thrombin loading

To combat post-surgical and traumatic bleeding conditions effective hemostasis is of great importance. The study was designed to investigate the effect of thrombin (Th) loading on hemostatic performance of TEMPO-oxidized cellulose nanofiber (TOCN)-silk fibroin (SF) scaffolds. Addition of SF with TOCN significantly (***P < 0.001) increased blood absorption capacity and improved biocompatibility of TOCN. Thrombin loading potentiated platelet activation and hemostatic property of scaffolds (TOCN-SF-Th) compared to samples without thrombin (TOCN-SF). The hemostatic time of TOCN-SF5-Th in rabbit ear artery bleeding model was reduced (*** P < 0.001) to 114 s from 220 s of TOCN-SF5. Reduction in bleeding time and blood loss of TOCN-SF5-Th in rat tail amputation and liver avulsion model was comparable to commercial hemostat (Floseal). Surface morphology (SEM) of samples applied on bleeding site showed that RBCs and fibrin fiber could strongly interact with TOCN-SF and TOCN-SF-Th scaffolds. The result suggests that TOCN-SF-Th can be a promising candidate for designing hemostatic agents.

Biodegradable spirulina extract/polycaprolactone porous scaffolds

Hydrophilicity, pores with interconnected structures, and degradability are important properties of tissue engineering scaffolds.

In Vitro Effectiveness of Microspheres Based on Silk Sericin and Chlorella vulgaris or Arthrospira platensis for Wound Healing Applications

Some natural compounds have recently been widely employed in wound healing applications due to their biological properties. One such compound is sericin, which is produced by Bombix mori, while active polyphenols, polysaccharides and proteins are synthetized by Chlorella vulgaris and Arthrospira platensis microalgae. Our hypothesis was that sericin, as an optimal bioactive polymeric carrier for microencapsulation process, could also improve the regenerative effect of the microalgae. A solvent-free extraction method and spray drying technique were combined to obtain five formulations, based on algal extracts (C. vulgaris and A. platensis, Chl and Art, respectively) or silk sericin (Ser) or their mixtures (Chl-Ser and Art-Ser). The spray drying was a suitable method to produce microspheres with similar dimensions, characterized by collapsed morphology with a rough surface. Art and Art-Ser showed higher antioxidant properties than other formulations. All microspheres resulted in cytocompatibility on fibroblasts until 1.25 mg/mL and promoted cell migration and the complete wound closure; this positive effect was further highlighted after treatment with Art and Art-Ser. To our surprize the combination of sericin to Art did not improve the microalgae extract efficacy, at least in our experimental conditions.

Fabrication and characterization of nanofibers of honey/poly(1,4-cyclohexane dimethylene isosorbide trephthalate) by electrospinning

We report the fabrication of novel nanofibers using naturally occurring antimicrobial honey incorporated in poly(1,4-cyclohexane dimethylene isosorbide trephthalate) (PICT) for the potential wound dressing applications. We fabricated PICT/honey using three blend ratios 90:10, 85:15 and 80:20 respectively. Morphology of PICT nanofibers and PICT/honey nanofibers was observed under Scanning Electron Microscope and it showed bead-free nanofibers. Fourier Transform Infrared Spectroscope was used to confirm the presence of honey in PICT electrospun nanofibers. Tensile strength of PICT/honey nanofibers was slightly reduced with variation in effect of elongation. Water contact angle measurements were done with the static contact angle by a contact angle meter, which showed that hydrophobicity was decreased by adding the honey. The XPS spectra showed that honey was present in the PICT/honey nanofibers. The release behavior of honey was investigated by UV-visible Spectrophotometer. The release was complete in 15min and the maximum release of honey was 72mg/L in 10min. Therefore, PICT/honey nanofibers having 15% concentration of honey are suitable for good elastic behavior and tensile strength as compared to other concentrations of honey.

Electrospun protein nanofibers in healthcare: A review

Electrospun nanofibers are being utilized for a wide range of healthcare applications. A plethora of natural and synthetic polymers are exploited for their ability to be electrospun and replace the complex habitat provided by the extracellular matrix for the cells. The fabrication of nanofibers can be tuned to act as a multicarrier system to deliver drugs, growth factors and health supplements etc. in a sustained manner. Owing to its pliability, nanofibers reached its heights in tissue engineering and drug delivery applications. This review mainly focuses on various standardized parameters and optimized blending ratios for animal and plant proteins to yield fine, continuous nanofibers for effective utilization in various healthcare applications.

Biological properties of dialdehyde carboxymethyl cellulose crosslinked gelatin-PEG composite hydrogel fibers for wound dressings

Gelatin-based composite hydrogel fibers were prepared by gel-spinning with PEG6000 as the modifier. Dialdehyde carboxymethyl cellulose (DCMC), as an ideal crosslinking reagent for protein, was used to fix the composite hydrogel fibers. Then the biological properties of the hydrogel fibers for wound dressings were evaluated. The results indicate that the hydrogen bond interactions and CN linkages between gelatin and DCMC can be formed. The addition of DCMC can efficiently improve the mechanical properties, enzymatic stability and blood compatibility of the hydrogel fibers. Crosslinking with DCMC can reduce the degree of swelling of the hydrogel fibers, which is beneficial for hydrogel fibers to avoid undesired reduction in mechanical properties. Moreover, the composite hydrogel fibers present three-dimensional structure, porous networks and low cytotoxicity. The study suggests that DCMC is an effective crosslinking reagent for biomaterials fixation. The developed composite hydrogel fibers can be well-suited for biomedical applications such as wound dressings.