Nanofibrous nonmulberry silk/PVA scaffold for osteoinduction and osseointegration

Silk fibroin-derived electrospun materials for biomedical applications: A review

Electrospinning is a versatile technique for fabricating polymeric fibers with diameters ranging from micro- to nanoscale, exhibiting multiple morphologies and arrangements. By combining silk fibroin (SF) with synthetic and/or natural polymers, electrospun materials with outstanding biological, chemical, electrical, physical, mechanical, and optical properties can be achieved, fulfilling the evolving biomedical demands. This review highlights the remarkable versatility of SF-derived electrospun materials, specifically focusing on their application in tissue regeneration (including cartilage, cornea, nerves, blood vessels, bones, and skin), disease treatment (such as cancer and diabetes), and the development of controlled drug delivery systems. Additionally, we explore the potential future trends in utilizing these nanofibrous materials for creating intelligent biomaterials, incorporating biosensors and wearable sensors for monitoring human health, and also discuss the bottlenecks for its widespread use. This comprehensive overview illuminates the significant impact and exciting prospects of SF-derived electrospun materials in advancing biomedical research and applications.

Poly(vinyl alcohol)/Silk Fibroin/Ag-NPs Composite Nanofibers as a Substrate for MG-63 Cells' Growth

Nanofiber scaffolds of polyvinyl alcohol, silk fibroin from Bombyx mori cocoons, and silver nanoparticles were developed as a substrate for MG-63 growth. The fiber morphology, mechanical properties, thermal degradation, chemical composition, and water contact angle were investigated. In vitro tests were performed by the cell viability MTS test of MG-63 cells on electrospun PVA scaffolds, mineralization was analyzed by alizarin red, and the alkaline phosphatase (ALP) assay was evaluated. At higher PVA concentrations, Young's modulus (E) increased. The addition of fibroin and silver nanoparticles improved the thermal stability of PVA scaffolds. FTIR spectra indicated characteristic absorption peaks related to the chemical structures of PVA, fibroin, and Ag-NPs, demonstrating good interactions between them. The contact angle of the PVA scaffolds decreased with the incorporation of fibroin and showed hydrophilic characteristics. In all concentrations, MG-63 cells on PVA/fibroin/Ag-NPs scaffolds had higher cell viability than PVA pristine. On day ten of culture, PVA18/SF/Ag-NPs showed the highest mineralization, observed by the alizarin red test. PVA10/SF/Ag-NPs presented the highest alkaline phosphatase activity after an incubation time of 37 h. The achievements indicate the potential of the nanofibers of PVA18/SF/Ag-NPs as a possible substitute for bone tissue engineering (BTE).

Nonmulberry silk fibroin-based biomaterials: Impact on cell behavior regulation and tissue regeneration

Silk fibroin (SF) is a promising biomaterial due to its good biocompatibility, easy availability, and high mechanical properties. Compared with mulberry silk fibroin (MSF), nonmulberry silk fibroin (NSF) isolated from typical nonmulberry silkworm silk exhibits unique arginine-glycine-aspartic acid (RGD) sequences with favorable cell adhesion enhancing effect. This inherent property probably makes the NSF more suitable for cell culture and tissue regeneration-related applications. Accordingly, various types of NSF-based biomaterials, such as particles, films, fiber mats, and 3D scaffolds, are constructed and their application potential in different biomedical fields is extensively investigated. Based on these promising NSF biomaterials, this review firstly makes a systematical comparison between the molecular structure and properties of MSF and typical NSF and highlights the unique properties of NSF. In addition, we summarize the effective fabrication strategies from degummed nonmulberry silk fibers to regenerated NSF-based biomaterials with controllable formats and their recent application progresses in cell behavior regulation and tissue regeneration. Finally, current challenges and future perspectives for the fabrication and application of NSF-based biomaterials are discussed. Related research and perspectives may provide valuable references for designing and modifying effective NSF-based and other natural biomaterials. STATEMENT OF SIGNIFICANCE: There exist many reviews about mulberry silk fibroin (MSF) biomaterials and their biomedical applications, while that about nonmulberry silk fibroin (NSF) biomaterials is scarce. Compared with MSF, NSF exhibits unique arginine-glycine-aspartic acid sequences with promising cell adhesion enhancing effect, which makes NSF more suitable for cell culture and tissue regeneration related applications. Focusing on these advanced NSF biomaterials, this review has systematically compared the structure and properties of MSF and NSF, and emphasized the unique properties of NSF. Following that, the effective construction strategies for NSF-based biomaterials are summarized, and their recent applications in cell behavior regulations and tissue regenerations are highlighted. Furthermore, current challenges and future perspectives for the fabrication and application of NSF-based biomaterials were discussed.

Metallic ion-based graphene oxide functionalized silk fibroin-based dressing promotes wound healing via improved bactericidal outcomes and faster re-epithelization

An ideal wound dressing material should enhance the wound healing process and must avoid bacterial contamination. In this study, the synergistic effect of graphene oxide (GO), silver (Ag) and magnesium (Mg) based silk electrospun nanofibrous film on wound healing was evaluated. It reports the influence of essential elements Mg and Ag during the skin regeneration process. Silver and magnesium nanoparticles were doped in graphene oxide. The goal of the present study was to fabricate an electrospun nanofibrous patch with nanoscale fillers to improve the wound recuperation manner and decrease the recuperation time to forestall microorganism infections and improve cellular behavior. Doping was done to insert Ag2+ and Mg2+ ions in the crystal lattice of GO to overcome the disadvantage of aggregation of Ag and Mg nanoparticles. In this study, Mg and Ag ions doped GO functionalized silk fibroin/PVA dressing material was prepared using the electrospinning technique. It was found that, Mg-GO@NSF/PVA and Ag/Mg-GO@NSF/PVA film possess good cytocompatibility, low hemolytic effect and effective antibacterial and anti-biofilm activities. Furthermore, their improved hydrophilicity and mid-range water vapor transmission rate allow them to be a suitable wound dressing material. The effect of prepared film on wound repair were investigated in excision rat model. It indicates, the wound covered with Ag/Mg-GO@NSF/PVA film showed the highest wound contraction rate and re-epithelization, allowing faster repair of wound sites. In conclusion, the development of metallic ions doped GO based silk fibroin/PVA is a promising approach towards development of antibiotic free wound dressing material. It prevents anti-biofilm formation and also provides adequate therapeutic effects for accelerating wound healing.

Transcutaneous tumor vaccination combined with anti-programmed death-1 monoclonal antibody treatment produces a synergistic antitumor effect

Transcutaneous immunization (TCI) has the advantages of safety, high efficiency, non-invasiveness and convenient use. The key for a TCI system is transdermal targeted delivery of antigen to dendritic cells (DCs), the most powerful antigen presenting cells. DCs also play an important role in tumor immunotherapy, which provides a huge imagination for the application of TCI to tumor treatment. In this study, a transcutaneous tumor vaccine (TTV) delivery system was developed using the electrospun silk fibroin (SF) and polyvinyl alcohol (PVA) composite nanofibrous patch loaded with mannosylated polyethyleneimine (PEI^man)-modified ethosome (Eth) (termed Eth-PEI^man). Eth-PEI^man showed a good performance in targeting DCs, and the carriers loaded with antigen (encapsulated in Eths) and adjuvant (absorbed in PEI^man) were observed effectively induce DCs maturation in vitro. With the tyrosinase-related protein-2 (TRP2) peptide as antigen and oligodeoxynucleotides containing unmethylated CpG motifs as adjuvant, the TTV-loaded patches (TTVP) significantly inhibited the growth of melanoma in a syngeneic mouse model for melanoma by subcutaneous injection of B16F10 cell lines. Moreover, the combined application of the TTVP and anti-programmed death-1 monoclonal antibody (aPD-1) produced a synergistic antitumor effect, which could be related to the infiltration of more CD4⁺ and CD8⁺ T cells in the tumor tissues. The application of TTVP also increased the expression of IL-12, which may be part of the mechanism of synergistic antitumor effect between the TTVP and aPD-1. These results suggest that the combination of the TTVP and immune checkpoint blockers could be an effective strategy for tumor treatment. STATEMENT OF SIGNIFICANCE: Transcutaneous immunization has the advantages of safety, high efficiency, non-invasiveness and convenient use. In this study, a novel transcutaneous tumor vaccine patch (TTVP) was developed using tumor antigens-loaded ethosomes that can target dendritic cells percutaneously. Our data demonstrated that the TTVP can significantly inhibit tumor growth. Furthermore, the combination of TTVP and aPD-1 produced a synergistic anti-melanoma effect. Considering its convenience and non-invasiveness, this TTVP system could find good application prospects in immunotherapy. The combination of TTVP and aPD-1 could be a useful strategy for the prevention and treatment of tumors.

Fabrication and characterization of 3-dimensional electrospun poly(vinyl alcohol)/keratin/chitosan nanofibrous scaffold

Layer-by-layer three-dimensional nanofibrous scaffolds (3DENS) were produced using the electrospinning technique. Interest in using biopolymers and application of electrospinning fabrication techniques to construct nanofibers for biomedical application has led to the development of scaffolds composed of PVA, keratin, and chitosan. To date, PVA/keratin blended nanofibers and PVA/chitosan blended nanofibers have been fabricated and studied for biomedical applications. Electrospun scaffolds comprised of keratin and chitosan have not yet been reported in published literature, thus a novel nanofibrous PVA/keratin/chitosan scaffold was fabricated by electrospinning. The resulting 3DENS were characterized using fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), differential scanning colorimetry (DSC), and thermogravimetric analysis (TGA). Physiochemical properties of the polymer solutions such as viscosity (rheology) and conductivity were also investigated. The 3DENS possess a relatively uniform fibrous structure, suitable porosity, swelling properties, and degradation which are affected by the mass ratio of keratin, and chitosan to PVA. These results demonstrate that PVA/keratin/chitosan 3DENS have the potential for biomedical applications.

Fibrous Polymer-Based Composites Obtained by Electrospinning for Bone Tissue Engineering

Currently, the significantly developing fields of tissue engineering related to the fabrication of polymer-based materials that possess microenvironments suitable to provide cell attachment and promote cell differentiation and proliferation involve various materials and approaches. Biomimicking approach in tissue engineering is aimed at the development of a highly biocompatible and bioactive material that would most accurately imitate the structural features of the native extracellular matrix consisting of specially arranged fibrous constructions. For this reason, the present research is devoted to the discussion of promising fibrous materials for bone tissue regeneration obtained by electrospinning techniques. In this brief review, we focus on the recently presented natural and synthetic polymers, as well as their combinations with each other and with bioactive inorganic incorporations in order to form composite electrospun scaffolds. The application of several electrospinning techniques in relation to a number of polymers is touched upon. Additionally, the efficiency of nanofibrous composite materials intended for use in bone tissue engineering is discussed based on biological activity and physiochemical characteristics.

Poly (vinyl alcohol)/Silk Fibroin/Ag NPs composite nanofibers for bone tissue engineering

In this work, electrospinning was used for the preparation of composite nanofibrous scaffold, of polyvinyl alcohol (PVA), silk fibroin (SF) extract of Bombyx mori cocoons and silver nanoparticles (Ag NPs), as a substrate for bone tissue engineering. The PVA pristine was prepared at a concentration of 10% wt. The composite nanofibers scaffolds of PVA was prepared with silk fibroin and silver nanoparticles, in relation of PVA: SF (90:10) (v/v) respectively. The formation and presence of AgNPs was confirmed by ultraviolet-visible spectroscopy (Uv-vis). The diameter distribution of the nanofibers was narrow by SEM using Image J software. The chemical composition was determined by FTIR spectra. The wettability was determined using water contact angle. The results showed the average nanofiber diameter of PVA10 pristine was 108.18 nm and to PVA10/SF/Ag NPs was 106.62 nm, no significant changes were noted in the mean diameter, but there were changes in its morphology. The average nanofiber diameter increase with the concentration of PVA at PVA15/SF/Ag NPs was 189.12 nm to PVA18/SF/Ag NPs was 224,23 nm. FTIR spectra indicated characteristic absorption peaks related to the chemical structure of PVA, fibroin and Ag NPs, it demonstrated good interactions between them, caused by strong intermolecular hydrogen bonds. The contact angle of the scaffolds PVA 10%wt decrease with the incorporation of fibroin and show hydrophilic characteristics. The achievements indicate the potential of the nanofibers of PVA15/SF/Ag NPs as a possible substitute for bone tissue engineering.Clinical Relevance-This establishes a possible substrate of PVA/SF/Ag NPs that exhibit desired properties such as porosity and high surface area to volume ratio for bone tissue engineering.

Nonmulberry silk proteins: multipurpose ingredient in bio-functional assembly

The emerging field of tissue engineering and regenerative medicines utilising artificial polymers is facing many problems. Despite having mechanical stability, non-toxicity and biodegradability, most of them lack cytocompatibility and biocompatibility. Natural polymers (such as collagen, hyaluronic acid, fibrin, fibroin, and others), including blends, are introduced to the field to solve some of the relevant issues. Another natural biopolymer: silkworm silk gained special attention primarily due to its specific biophysical, biochemical, and material properties, worldwide availability, and cost-effectiveness. Silk proteins, namely fibroin and sericin extracted from domesticated mulberry silkwormBombyx mori, are studied extensively in the last few decades for tissue engineering. Wild nonmulberry silkworm species, originated from India and other parts of the world, also produce silk proteins with variations in their nature and properties. Among the nonmulberry silkworm species,Antheraea mylitta(Indian Tropical Tasar),A. assamensis/A. assama(Indian Muga), andSamia ricini/Philosamia ricini(Indian Eri), along withA. pernyi(Chinese temperate Oak Tasar/Tussah) andA. yamamai(Japanese Oak Tasar) exhibit inherent tripeptide motifs of arginyl glycyl aspartic acid in their fibroin amino acid sequences, which support their candidacy as the potential biomaterials. Similarly, sericin isolated from such wild species delivers unique properties and is used as anti-apoptotic and growth-inducing factors in regenerative medicines. Other characteristics such as biodegradability, biocompatibility, and non-inflammatory nature make it suitable for tissue engineering and regenerative medicine based applications. A diverse range of matrices, including but not limited to nano-micro scale structures, nanofibres, thin films, hydrogels, and porous scaffolds, are prepared from the silk proteins (fibroins and sericins) for biomedical and tissue engineering research. This review aims to represent the progress made in medical and non-medical applications in the last couple of years and depict the present status of the investigations on Indian nonmulberry silk-based matrices as a particular reference due to its remarkable potentiality of regeneration of different types of tissues. It also discusses the future perspective in tissue engineering and regenerative medicines in the context of developing cutting-edge techniques such as 3D printing/bioprinting, microfluidics, organ-on-a-chip, and other electronics, optical and thermal property-based applications.

A novel gradient and multilayered sheet with a silk fibroin/polyvinyl alcohol core-shell structure for bioabsorbable arterial grafts

Bioabsorbable arterial grafts can potentially improve patency and neovessel formation; however, their application in clinical settings has not been realized. In this study, we developed bioabsorbable gradient sheets based on silk fibroin (SF) and polyvinyl alcohol (PVA) with a core-shell nanofibrous structure. This gradient sheet was expected to promote vascular remodeling while we maintained its physical properties and a gradual degrading process from the luminal surface. ESP was conducted at various flow rates for SF and PVA to achieve the multilayer gradient structure. Furthermore, the elasticity of the gradient sheet could be increased by increasing the PVA flow rate; however, this reduced the tensile strength of the core-shell fibers. Notably, the physical properties of the gradient sheet did not degrade even after 7 days of immersion in a phosphate buffer saline solution, which indicates that the structure could maintain its structural integrity while resisting arterial pressure. In vitro experiments revealed that the number of endothelial cells attached to the SF/PVA sheet was notably higher than that on the cell-culture dish. The gradient sheets were implanted in rat abdominal aortas and explanted after 14 days to confirm acute-phase patency and vascular remodeling. The gradient sheets constructed with SF composed of polyurethane and PVA improved the ease of handling of the material, and these sheets resulted in a favorable vascular remodeling outcome. Our results strongly suggest that the SF/PVA-based gradient sheets described in this study can serve as a novel design for bioabsorbable arterial grafts upon further modifications.

Fabrication and Characterization of Polyvinylpyrrolidone-Eggshell Membrane-Reduced Graphene Oxide Nanofibers for Tissue Engineering Applications

One of the best methods to prevent wound infection and speed up wound healing is wound dressing based on nanofiber-polymer scaffolds, which have acceptable antimicrobial performance and appropriate skin regeneration capabilities. In this paper, the electrospinning method was applied to synthesize the polyvinylpyrrolidone-acrylic acid hydrogel (PVPA)-eggshell membrane (ESM)-reduced graphene oxide (rGO) nanosheets nanocomposite dressings with different reduced graphene oxide contents (0, 0.5, 1, and 2 wt.%). Thus, smooth nanofibers were fabricated, including a high amount of rGO, which reduced the fiber diameter. Based on the results, rGO played an important role in water impermeability. The results showed that by increasing the rGO concentration from 0.5 to 2 wt%, the contact angle value increased persistently. Results showed that compared to PVPA-ESM, the mechanical strength and strain of PVPA-ESM/1 wt% rGO significantly enhanced 28% and 23%, respectively. Incorporation of 1 wt% rGO enhanced swelling ratio from 875% for PVPA-ESM to 1235% after 420 min, while increasing the rGO to 2 wt% increased the degradation rate of the composites. According to the in vitro cell culture studies, PVPA-ESM wound dressings with 0.5-1 wt% rGO content enhanced PC12 cell viability compared to the wound dressings without rGO nanosheets. Generally, rGO-loaded PVPA-ESM nanofiber wound dressing can be considered as a potential candidate to be used in skin regeneration applications.

Silk fibroin nanoscaffolds for neural tissue engineering

The nervous system is a crucial component of the body and damages to this system, either by injury or disease, can result in serious or potentially lethal consequences. An important problem in neural engineering is how we can stimulate the regeneration of damaged nervous tissue given its complex physiology and limited regenerative capacity. To regenerate damaged nervous tissue, this study electrospun three-dimensional nanoscaffolds (3DNSs) from a biomaterial blend of silk fibroin (SF), polyethylene glycol (PEG), and polyvinyl alcohol (PVA). The 3DNSs were characterised to ascertain their potential suitability for direct implant into the CNS. The biological activity of 3DNSs was investigated in vitro using PC12 cells and their effects on reactive astrogliosis were assessed in vivo using a photothrombotic model of ischaemic stroke in mice. Results showed that the concentration of SF directly affected the mechanical characteristics and internal structure of the 3DNSs, with formulations presenting as either a gel-like structure (SF ≥ 50%) or a nanofibrous structure (SF ≤ 40%). In vitro assessment revealed increased cell viability in the presence of the 3DNSs and in vivo assessment resulted in a significant decrease in glial fibrillary acidic protein (GFAP) expression in the peri-infarct region (p < 0.001 for F2 and p < 0.05 for F4) after stroke, suggesting that 3DNSs could be suppressing reactive astrogliosis. The findings enhanced our understanding of physiochemical interactions between SF, PEG, and PVA, and elucidated the potential of 3DNSs as a potential therapeutic approach to stroke recovery, especially if these are used in conjunction with drug or cell treatment.

High-Strength Albumin Hydrogels With Hybrid Cross-Linking

Natural protein-based hydrogels possess excellent biocompatibility; however, most of them are weak or brittle. In the present work, high strength hybrid dual-crosslinking BSA gels (BSA DC gels), which have both chemical cross-linking and physical cross-linking, were fabricated by a facile photoreaction-heating process. BSA DC gels showed high transparency (light transmittance of ~90%) and high strength. At optimal conditions, BSA DC gel exhibited high compressive strength (σc,f) of 37.81 ± 2.61 MPa and tensile strength (σt,f) of 0.62 ± 0.078 MPa, showing it to be much stronger than physically cross-linked BSA gel (BSA PC gel) and chemically cross-linked BSA gel (BSA CC gel). More importantly, BSA DC gel displayed non-swelling properties while maintaining high strength in DI water, pH = 3.0, and pH = 10.0. Moreover, BSA DC gel also demonstrated large hysteresis, rapid self-recovery, and excellent fatigue resistance properties. It is believed that our BSA DC gel can potentially be applied in biomedical fields.

Development of nano-porous hydroxyapatite coated e-glass for potential bone-tissue engineering application: An in vitro approach

To reconstruct the defects caused by craniectomies autologous, bone grafting was usually used, but they failed most commonly due to bone resorption, infections and donor-site morbidity. In the present investigation, an effort has been made for the first time to check the feasibility and advantage of using hydroxyapatite (HAp) coated e-glass as component of bone implants. Sol-gel synthesized coatings were found to be purely hydroxyapatite from XRD with graded and interconnected pores all over the surface observable in TEM. The interconnected porous nature of ceramics are found to increase bioactivity by acting to up-regulate the process of osseointegration through enhanced nutrient transfer and induction of angiogenesis. From TEM studies and nano indentation studies, we have shown that pores were considered to be appropriate for nutrient supply without compromising the strength of sample while in contact with physiological fluid. After SBF immersion test, porous surface was found to be useful for nucleation of apatite crystals, hence increasing the feasibility and bioactivity of sample. However, our quasi-dynamic study showed less crystallization but had significant formation of apatite layer. Overall, the in vitro analyses show that HAp coated e-glass leads to significant improvement of implant properties in terms of biocompatibility, cell viability and proliferation, osteoinductivity and osteoconductivity. HAp coating of e-glass can potentially be utilized in fabricating durable and strong bioactive non-metallic implants and tissue engineering scaffolds.

Fibroin and Polyvinyl Alcohol Hydrogel Wound Dressing Containing Silk Sericin Prepared Using High-Pressure Carbon Dioxide

Objective: To fabricate and investigate the properties of fibroin and polyvinyl alcohol (PVA) hydrogels containing sericin prepared using high-pressure carbon dioxide (CO₂). Approach: In this study, fibroin/PVA hydrogels with and without sericin were prepared using the high-pressure CO₂ method. The physical and mechanical properties of the hydrogels were investigated using field-emission scanning electron microscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry, and the swelling, water retention, and compressive properties were assessed. Results: The hydrogels obtained from the combination of fibroin and PVA presented a compositional gradient along the hydrogel thickness and structure. The upper layer of the hydrogel consisted of a fibroin-based hydrogel blended with PVA, whereas the lower layer contained only fibroin. The mechanical properties regarding compression of the fibroin/PVA hydrogel were significantly better than those of the pure fibroin hydrogel, for hydrogels with and without sericin. Moreover, the mechanical properties of the hydrogels with sericin were significantly better than those without sericin. The water contents of all samples were >90%. Innovation: This study assessed a new combination of a wound healing agent and a biomaterial dressing. Moreover, this hydrogel production technique used a clean method without the need for a chemical crosslinking agent. Conclusion: The combination of the fibroin and PVA hydrogel and sericin prepared using the high-pressure CO₂ method led to good physical properties. This material may be a candidate for medical applications.

Biopolymers as bone substitutes: a review

Human bones have unique structures and characteristics, and replacing a natural bone in the case of bone fracture or bone diseases is a very complicated problem. The main goal of this paper was to summarize the recent research on polymer materials as bone substitutes and for bone repair. Bone treatment methods, bone substitute materials as well as their advantages and drawbacks, and manufacturing methods were reviewed. Biopolymers are the most promising materials in the field of artificial bones and using biopolymers with the shape memory effect can improve the integration of an artificial bone into the human body by better mimicking the structure and properties of natural bones, decreasing the invasiveness of surgical procedures by producing deployable implants. It has been shown that the application of the rapid prototyping technology for artificial bones allows the customization of bone substitutes for a patient and the creation of artificial bones with a complex structure.

Recent Advances in Biomaterials Science and Engineering Research in India: A Minireview

Biomedical research in health innovation and product development encompasses convergent technologies that primarily integrate biomaterials science and engineering at its core. Particularly, research in this area is instrumental for the implementation of biomedical devices (BMDs) that offer innovative solutions to help maintain and improve quality of life of patients worldwide. Despite achieving extraordinary success, implantable BMDs are still confronted with complex engineering and biological challenges that need to addressed for augmenting device performance and prolonging lifetime in vivo. Biofabrication of tissue constructs, designing novel biomaterials and employing rational biomaterial design approaches, surface engineering of implants, point of care diagnostics and micro/nano-based biosensors, smart drug delivery systems, and noninvasive imaging methodologies are among strategies exploited for improving clinical performance of implantable BMDs. In India, advances in biomedical technologies have dramatically advanced health care over the last few decades and the country is well-positioned to identify opportunities and translate emerging solutions. In this article, we attempt to capture the recent advances in biomedical research and development progressing across the country and highlight the significant research work accomplished in the areas of biomaterials science and engineering.

Human Knee Meniscus Regeneration Strategies: a Review on Recent Advances

PURPOSE OF REVIEW

Lack of vascularity in the human knee meniscus often leads to surgical removal (total or partial meniscectomy) in the case of severe meniscal damage. However, complete recovery is in question after such removal as the meniscus plays an important role in knee stability. Thus, meniscus tissue regeneration strategies are of intense research interest in recent years.

RECENT FINDINGS

The structural complexity and inhomogeneity of the meniscus have been addressed with processing technologies for precisely controlled three dimensional (3D) complex porous scaffold architectures, the use of biomolecules and nanomaterials. The regeneration and replacement of the total meniscus have been studied by the orthopedic and scientific communities via successful pre-clinical trials towards mimicking the biomechanical properties of the human knee meniscus. Researchers have attempted different regeneration strategies which contribute to in vitro regeneration and are capable of repairing meniscal tears to some extent. This review discusses the present state of the art of these meniscus tissue engineering aspects.

Silk scaffolds in bone tissue engineering: An overview

Bone tissue plays multiple roles in our day-to-day functionality. The frequency of accidental bone damage and disorder is increasing worldwide. Moreover, as the world population continues to grow, the percentage of the elderly population continues to grow, which results in an increased number of bone degenerative diseases. This increased elderly population pushes the need for artificial bone implants that specifically employ biocompatible materials. A vast body of literature is available on the use of silk in bone tissue engineering. The current work presents an overview of this literature from materials and fabrication perspective. As silk is an easy-to-process biopolymer; this allows silk-based biomaterials to be molded into diverse forms and architectures, which further affects the degradability. This makes silk-based scaffolds suitable for treating a variety of bone reconstruction and regeneration objectives. Silk surfaces offer active sites that aid the mineralization and/or bonding of bioactive molecules that facilitate bone regeneration. Silk has also been blended with a variety of polymers and minerals to enhance its advantageous properties or introduce new ones. Several successful works, both in vitro and in vivo, have been reported using silk-based scaffolds to regenerate bone tissues or other parts of the skeletal system such as cartilage and ligament. A growing trend is observed toward the use of mineralized and nanofibrous scaffolds along with the development of technology that allows to control scaffold architecture, its biodegradability and the sustained releasing property of scaffolds. Further development of silk-based scaffolds for bone tissue engineering, taking them up to and beyond the stage of human trials, is hoped to be achieved in the near future through a cross-disciplinary coalition of tissue engineers, material scientists and manufacturing engineers.

STATEMENT OF SIGNIFICANCE

The state-of-art of silk biomaterials in bone tissue engineering, covering their wide applications as cell scaffolding matrices to micro-nano carriers for delivering bone growth factors and therapeutic molecules to diseased or damaged sites to facilitate bone regeneration, is emphasized here. The review rationalizes that the choice of silk protein as a biomaterial is not only because of its natural polymeric nature, mechanical robustness, flexibility and wide range of cell compatibility but also because of its ability to template the growth of hydroxyapatite, the chief inorganic component of bone mineral matrix, resulting in improved osteointegration. The discussion extends to the role of inorganic ions such as Si and Ca as matrix components in combination with silk to influence bone regrowth. The effect of ions or growth factor-loaded vehicle incorporation into regenerative matrix, nanotopography is also considered.

Bone Morphogenic Protein-2 (rhBMP2)-Loaded Silk Fibroin Scaffolds to Enhance the Osteoinductivity in Bone Tissue Engineering

There is an increasing demand for formulations of silk fibroin (SF) scaffolds in biomedical applications. SF was crosslinked via glutaraldehyde with osteoinductive recombinant human bone morphogenic protein-2 (rhBMP2) of different ratios viz. (i) 3% SF with no rhBMP2 (SF), (ii) 3% SF with equal amount of rhBMP2 (SF+BMP2), and (iii) 12% SF with 3% of rhBMP2 (4SF+BMP2), and these solutions were used in electrospinning-based fabrication of nanoscaffolds for evaluating increased osteoinductive potential of SF scaffolds with rhBMP2. Stress-strain relationship suggested there is no loss in mechanical strength of fibers with addition of rhBMP2, and mechanical strength of scaffold was improved with increase in concentration of SF. rhBMP2 association increased the water retention capacity of scaffold as evident from swelling studies. Viability of hMSCs was found to be higher in conjugated scaffolds, and scaffolds do not exhibit any cytotoxicity towards guest cells. Cells were found to have higher alkaline phosphatase activity in conjugated scaffolds under in vitro and in vivo conditions which establishes the increased osteoinductivity of the novel construct. The scaffolds were found to be effective for in vivo bone formation as well.

Mimicking Hierarchical Complexity of the Osteochondral Interface Using Electrospun Silk-Bioactive Glass Composites

The anatomical complexity and slow regeneration capacity of hyaline cartilage at the osteochondral interface pose a great challenge in the repair of osteochondral defects (OCD). In this study, we utilized the processing feasibility offered by the sol derived 70S bioactive glass and silk fibroin (mulberry Bombyx mori and endemic Indian non-mulberry Antheraea assama), in fabricating a well-integrated, biomimetic scaffolding matrix with a coherent interface. Differences in surface properties such as wettability and amorphousness between the two silk groups resulted in profound variations in cell attachment and extracellular matrix protein deposition. Mechanical assessment showed that the biphasic composites exhibited both an elastic region pertinent for cartilage tissue and a stiff compression resistant region simulating the bone phase. In vitro biological studies revealed that the biphasic mats presented spatial confinement for the growth and maturation of both osteoblasts and chondrocytes, marked by increased alkaline phosphatase (ALP) activity, osteopontin (OPN), sulfated glycosaminoglycan (sGAG) and collagen secretion in the cocultured mats. The non-mulberry silk based biphasic composite mats performed better than their mulberry counterpart, as evidenced by enhanced expression levels of key cartilage and bone specific marker genes. Therefore, the developed biphasic scaffold show great promise for improving the current clinical strategies for osteochondral tissue repair.

Enhancing the Gelation and Bioactivity of Injectable Silk Fibroin Hydrogel with Laponite Nanoplatelets

Regenerated silk fibroin (RSF) of Bombyx mori silk fiber is a promising natural material for bone defect repair. However, a lack of specific integrin and growth factor for osteoinduction significantly hinders its application in this area. In this study, the role of Laponite nanoplatelet (LAP), a bioactive clay that can promote osteoblast growth, in the formation of RSF hydrogel, as well as the various properties of RSF/LAP hybrid hydrogel, was closely investigated. The results indicate that LAP could serve as a medium to accelerate hydrophobic interaction among the RSF molecules and a disruptor to limit the growth of β-sheet domain during the gelation of RSF. Rheological measurement suggests that the RSF/LAP hydrogel is injectable as it displays thixotropy in the room temperature. Proliferation and differentiation results of the primary osteoblasts encapsulated in hydrogel show that RSF/LAP hydrogel can promote the cell proliferation and enhance the osteogenic differentiation. The transcript levels for alkaline phosphatase, osteocalcin, osteopontin, and collagen type I osteogenic markers obviously improve with RSF/LAP hydrogel compared to the controls at 14 days, especially with the higher contents of LAP. Overall, the results suggest that the RSF/LAP hydrogel have great potential to be utilized as an injectable biomaterial for irregular bone defect repair.