Fluorescence-based sensing system for copper using genetically engineered living yeast cells

Surface display provides an efficient expression system for production of recombinant proteins and bacterial whole cell biosensor in E. coli

A novel bacterial display vector based on Escherichia coli has been engineered for recombinant protein production and purification. Accordingly, a construct harboring the enhanced green fluorescent protein (EGFP) and the ice nucleation protein (INP) was designed to produce EGFP via the surface display in E. coli cells. The fusion EGFP-expressed cells were then investigated using fluorescence measurement, SDS- and native-PAGE before and after TEV protease digestion. The displayed EGFP was obtained with a recovery of 57.7 % as a single band on SDS-PAGE. Next, the efficiency of the cell surface display for mutant EGFP (EGFP S202H/Q204H) was examined in sensing copper ions. Under optimal conditions, a satisfactorily linear range for copper ions concentrations up to 10 nM with a detection limit of 0.073 nM was obtained for cell-displayed mutant EGFP (mEGFP). In the presence of bacterial cell lysates and purified mEGFP, response to copper was linear in the 2-10 nM and 0.1-2 μM concentration range, respectively, with a 1.3 nM and 0.14 μM limit of detection. The sensitivity of bacterial cell lysates and surface-displayed mEGFP in the detection of copper ions is higher than the purified mEGFP.

RNAi-based Boolean gates in the yeast Saccharomyces cerevisiae

Boolean gates, the fundamental components of digital circuits, have been widely investigated in synthetic biology because they permit the fabrication of biosensors and facilitate biocomputing. This study was conducted to design and construct Boolean gates in the yeast Saccharomyces cerevisiae, the main component of which was the RNA interference pathway (RNAi) that is naturally absent from the budding yeast cells. We tested different expression cassettes for the siRNA precursor (a giant hairpin sequence, a DNA fragment-flanked by one or two introns-between convergent promoters or transcribed separately in the sense and antisense directions) and placed different components under the control of the circuit inputs (i.e., the siRNA precursor or proteins such as the Dicer and the Argonaute). We found that RNAi-based logic gates are highly sensitive to promoter leakage and, for this reason, challenging to implement in vivo. Convergent-promoter architecture turned out to be the most reliable solution, even though the overall best performance was achieved with the most difficult design based on the siRNA precursor as a giant hairpin.

Engineered Bacillus subtilis Biofilm@Biochar living materials for in-situ sensing and bioremediation of heavy metal ions pollution

The simultaneous sensing and remediation of multiple heavy metal ions in wastewater or soil with microorganisms is currently a significant challenge. In this study, the microorganism Bacillus subtilis was used as a chassis organism to construct two genetic circuits for sensing and adsorbing heavy-metal ions. The engineered biosensor can sense three heavy metal ions (0.1-75 μM of Pb2+ and Cu2+, 0.01-3.5 μM of Hg2+) in situ real-time with high sensitivity. The engineered B. subtilis TasA-metallothionein (TasA-MT) biofilm can specifically adsorb metal ions from the environment, exhibiting remarkable removal efficiencies of 99.5% for Pb2+, 99.9% for Hg2+and 99.5% for Cu2+ in water. Furthermore, this engineered strain (as a biosensor and absorber of Pb2+, Cu2+, and Hg2+) was incubated with biochar to form a hybrid biofilm@biochar (BBC) material that could be applied in the bioremediation of heavy metal ions. The results showed that BBC material not only significantly reduced exchangeable Pb2+ in the soil but also reduced Pb2+ accumulation in maize plants. In addition, it enhanced maize growth and biomass. In conclusion, this study examined the potential applications of biosensors and hybrid living materials constructed using sensing and adsorption circuits in B. subtilis, providing rapid and cost-effective tools for sensing and remediating multiple heavy metal ions (Pb2+, Hg2+, and Cu2+).

Synthetic biology tools for environmental protection

Synthetic biology transforms the way we perceive biological systems. Emerging technologies in this field affect many disciplines of science and engineering. Traditionally, synthetic biology approaches were commonly aimed at developing cost-effective microbial cell factories to produce chemicals from renewable sources. Based on this, the immediate beneficial impact of synthetic biology on the environment came from reducing our oil dependency. However, synthetic biology is starting to play a more direct role in environmental protection. Toxic chemicals released by industries and agriculture endanger the environment, disrupting ecosystem balance and biodiversity loss. This review highlights synthetic biology approaches that can help environmental protection by providing remediation systems capable of sensing and responding to specific pollutants. Remediation strategies based on genetically engineered microbes and plants are discussed. Further, an overview of computational approaches that facilitate the design and application of synthetic biology tools in environmental protection is presented.

Molecular advances in mycoremediation of polycyclic aromatic hydrocarbons: Exploring fungal bacterial interactions

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous high global concern environmental pollutants and tend to bioaccumulate due to hydrophobic properties. These xenobiotics, having variable concentrations along different matrices, gradually undergo various physical, chemical, and biological transformation processes. Myco-remediation aids accelerated degradation by effectively transforming complex ring structures to oxidized/hydroxylated intermediates, which can further funnel to bacterial degradation pathways. Exploitation of such complementing fungal-bacterial enzymatic activity can overcome certain limitations of incomplete bioremediation process. Furthermore, high-throughput molecular methods can be employed to unveil community structure, taxon abundance, coexisting community interactions, and metabolic pathways under stressed conditions. The present review critically discusses the role of different fungal phyla in PAHs biotransformation and application of fungal-bacterial cocultures for enhanced mineralization. Moreover, recent advances in bioassays for PAH residue detection, monitoring, developing xenobiotics stress-tolerant strains, and application of fungal catabolic enzymes are highlighted. Application of next-generation sequencing methods to reveal complex ecological networks based on microbial community interactions and data analysis bias in performing such studies is further discussed in detail. Conclusively, the review underscores the application of mixed-culture approach by critically highlighting in situ fungal-bacterial community nexus and its role in complete mineralization of PAHs for the management of contaminated sites.

Biological and technical challenges for implementation of yeast-based biosensors

Biosensors are low-cost and low-maintenance alternatives to conventional analytical techniques for biomedical, industrial and environmental applications. Biosensors based on whole microorganisms can be genetically engineered to attain high sensitivity and specificity for the detection of selected analytes. While bacteria-based biosensors have been extensively reported, there is a recent interest in yeast-based biosensors, combining the microbial with the eukaryotic advantages, including possession of specific receptors, stability and high robustness. Here, we describe recently reported yeast-based biosensors highlighting their biological and technical features together with their status of development, that is, laboratory or prototype. Notably, most yeast-based biosensors are still in the early developmental stage, with only a few prototypes tested for real applications. Open challenges, including systematic use of advanced molecular and biotechnological tools, bioprospecting, and implementation of yeast-based biosensors in electrochemical setup, are discussed to find possible solutions for overcoming bottlenecks and promote real-world application of yeast-based biosensors.

Identification of acetic acid sensitive strains through biosensor-based screening of a Saccharomyces cerevisiae CRISPRi library

Background

Acetic acid tolerance is crucial for the development of robust cell factories for conversion of lignocellulosic hydrolysates that typically contain high levels of acetic acid. Screening mutants for growth in medium with acetic acid is an attractive way to identify sensitive variants and can provide novel insights into the complex mechanisms regulating the acetic acid stress response.

Results

An acetic acid biosensor based on the Saccharomyces cerevisiae transcription factor Haa1, was used to screen a CRISPRi yeast strain library where dCas9-Mxi was set to individually repress each essential or respiratory growth essential gene. Fluorescence-activated cell sorting led to the enrichment of a population of cells with higher acetic acid retention. These cells with higher biosensor signal were demonstrated to be more sensitive to acetic acid. Biosensor-based screening of the CRISPRi library strains enabled identification of strains with increased acetic acid sensitivity: strains with gRNAs targeting TIF34, MSN5, PAP1, COX10 or TRA1.

Conclusions

This study demonstrated that biosensors are valuable tools for screening and monitoring acetic acid tolerance in yeast. Fine-tuning the expression of essential genes can lead to altered acetic acid tolerance.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01938-7.

Versatile tools of synthetic biology applied to drug discovery and production

Although synthetic biology is an emerging research field, which has come to prominence within the last decade, it already has many practical applications. Its applications cover the areas of pharmaceutical biotechnology and drug discovery, bringing essential novel methods and strategies such as metabolic engineering, reprogramming the cell fate, drug production in genetically modified organisms, molecular glues, functional nucleic acids and genome editing. This review discusses the main avenues for synthetic biology application in pharmaceutical biotechnology. The authors believe that synthetic biology will reshape drug development and drug production to a similar extent as the advances in organic chemical synthesis in the 20th century. Therefore, synthetic biology already plays an essential role in pharmaceutical, biotechnology, which is the main focus of this review.

Engineering Saccharomyces cerevisiae-based biosensors for copper detection

Heavy metals, that is Cu(II), are harmful to the environment. There is an increasing demand to develop inexpensive detection methods for heavy metals. Here, we developed a yeast biosensor with reduced‐noise and improved signal output for potential on‐site copper ion detection. The copper‐sensing circuit was achieved by employing a secondary genetic layer to control the galactose‐inducible (GAL) system in Saccharomyces cerevisiae. The reciprocal control of the Gal4 activator and Gal80 repressor under copper‐responsive promoters resulted in a low‐noise and sensitive yeast biosensor for copper ion detection. Furthermore, we developed a betaxanthin‐based colorimetric assay, as well as 2‐phenylethanol and styrene‐based olfactory outputs for the copper ion detection. Notably, our engineered yeast sensor confers a narrow range switch‐like behaviour, which can give a ‘yes/no’ response when coupled with a betaxanthin‐based visual phenotype. Taken together, we envision that the design principle established here might be applicable to develop other sensing systems for various chemical detections.

A low‐noise yeast biosensor was developed for copper detection. The yeast biosensor confers a switch‐like behavior with a “yes/no” response. The olfactory outputs for copper detection were also developed.

Bioinformatic prediction of putative metallothioneins in non-ciliate protists

Intracellular ligands that bind heavy metals (HMs) and thereby minimize their detrimental effects to cellular metabolism are attracting great interest for a number of applications including bioremediation and development of HM-biosensors. Metallothioneins (MTs) are short, cysteine-rich, genetically encoded proteins involved in intracellular metal-binding and play a key role in detoxification of HMs. We searched approximately 700 genomes and transcriptomes of non-ciliate protists for novel putative MTs by similarity and structural analyses and found 21 unique proteins playing a potential role as MTs. Most putative MTs derive from heterokonts and dinoflagellates and share common features such as (i) a putative metal-binding domain in proximity of the N-terminus, (ii) two putative MT-specific domains near the C-terminus and (iii) one to three CTCGXXCXCGXXCXCXXC patterns. Although the biological function of these proteins has not been experimentally proven, knowledge of their genetic sequences adds useful information on proteins that are potentially involved in HM-binding and can contribute to the design of future biomolecular assays on HM-microbe interactions and MT-based biosensors.

A fluorescence-based yeast sensor for monitoring acetic acid

Accumulation of acetic acid indicates an imbalance of the process due to a disturbed composition of the microorganisms. Hence, monitoring the acetic acid concentration is an important parameter to control the biogas process. Here, we describe the generation and validation of a fluorescence-based whole cell sensor for the detection of acetic acid based on the yeast Saccharomyces cerevisiae. Acetic acid induces the transcription of a subset of genes. The 5´-regulatory sequences (5´ URS) of these genes were cloned into a multicopy plasmid to drive the expression of a red fluorescent reporter gene. The 5´ URS of YGP1, encoding a cell wall-related glycoprotein, led to a 20-fold increase of fluorescence upon addition of 30 mM acetic acid to the media. We show that the system allows estimating the approximate concentration of acetic acid in condensation samples from a biogas plant. To avoid plasmid loss and increase the long-term stability of the sensor, we integrated the reporter construct into the yeast genome and tested the suitability of spores for long-term storage of sensor cells. Lowering the reporter gene's copy number resulted in a significant drop of the fluorescence, which can be compensated by applying a yeast pheromone-based signal amplification system.

Diversity, structure and regulation of microbial metallothionein: metal resistance and possible applications in sequestration of toxic metals

Metallothioneins (MTs) are a group of cysteine-rich, universal, low molecular weight proteins distributed widely in almost all major taxonomic groups ranging from tiny microbes to highly organized vertebrates. The primary function of this protein is storage, transportation and binding of metals, which enable microorganisms to detoxify heavy metals. In the microbial world, these peptides were first identified in a cyanobacterium Synechococcus as the SmtA protein which exhibits high affinity towards rising level of zinc and cadmium to preserve metal homeostasis in a cell. In yeast, MTs aid in reserving copper and confer protection against copper toxicity by chelating excess copper ions in a cell. Two MTs, CUP1 and Crs5, originating from Saccharomyces cerevisiae predominantly bind to copper though are capable of binding with zinc and cadmium ions. MT superfamily 7 is found in ciliated protozoa which show high affinity towards copper and cadmium. Several tools and techniques, such as western blot, capillary electrophoresis, inductively coupled plasma, atomic emission spectroscopy and high performance liquid chromatography, have been extensively utilized for the detection and quantification of microbial MTs which are utilized for the efficient remediation and sequestration of heavy metals from a contaminated environment.

Yeast-Based Biosensors: Current Applications and New Developments

Biosensors are regarded as a powerful tool to detect and monitor environmental contaminants, toxins, and, more generally, organic or chemical markers of potential threats to human health. They are basically composed of a sensor part made up of either live cells or biological active molecules coupled to a transducer/reporter technological element. Whole-cells biosensors may be based on animal tissues, bacteria, or eukaryotic microorganisms such as yeasts and microalgae. Although very resistant to adverse environmental conditions, yeasts can sense and respond to a wide variety of stimuli. As eukaryotes, they also constitute excellent cellular models to detect chemicals and organic contaminants that are harmful to animals. For these reasons, combined with their ease of culture and genetic modification, yeasts have been commonly used as biological elements of biosensors since the 1970s. This review aims first at giving a survey on the different types of yeast-based biosensors developed for the environmental and medical domains. We then present the technological developments currently undertaken by academic and corporate scientists to further drive yeasts biosensors into a new era where the biological element is optimized in a tailor-made fashion by in silico design and where the output signals can be recorded or followed on a smartphone.

Metatranscriptomics: an approach for retrieving novel eukaryotic genes from polluted and related environments

Metatranscriptomics, a subset of metagenomics, provides valuable information about the whole gene expression profiling of complex microbial communities of an ecosystem. Metagenomic studies mainly focus on the genomic content and identification of microbes present within a community, while metatranscriptomics provides the diversity of the active genes within such community, their expression profile and how these levels change due to change in environmental conditions. Metatranscriptomics has been applied to different types of environments, from the study of human microbiomes, to those found in plants, animals, within soils and in aquatic systems. Metatranscriptomics, based on the utilization of mRNA isolated from environmental samples, is a suitable approach to mine the eukaryotic gene pool for genes of biotechnological relevance. Also, it is imperative to develop different bioinformatic pipelines to analyse the data obtained from metatranscriptomic analysis. In the present review, we summarise the metatranscriptomics applied to soil environments to study the functional diversity, and discuss approaches for isolating the genes involved in organic matter degradation and providing tolerance to toxic metals, role of metatranscriptomics in microbiome research, various bioinformatics pipelines used in data analysis and technical challenges for gaining biologically meaningful insight of this approach.

Sensitivity limits of biosensors used for the detection of metals in drinking water

Even when present in very low concentrations, certain metal ions can have significant health impacts depending on their concentration when present in drinking water. In an effort to detect and identify trace amounts of such metals, environmental monitoring has created a demand for new and improved methods that have ever-increasing sensitivities and selectivity. This paper reviews the sensitivities of over 100 recently published biosensors using various analytical techniques such as fluorescence, voltammetry, inductively coupled plasma techniques, spectrophotometry and visual colorimetric detection that display selectivity for copper, cadmium, lead, mercury and/or aluminium in aqueous solutions.

Transcriptional regulatory proteins as biosensing tools

We have developed sensing systems employing different classes of transcriptional regulatory proteins genetically and chemically modified to incorporate a fluorescent reporter molecule for detection of arsenic, hydroxylated polychlorinated biphenyls (OH-PCBs), and cyclic AMP (cAMP). These are the first examples of optical sensing systems based on transcriptional regulatory proteins.

Engineering Rugged Field Assays to Detect Hazardous Chemicals Using Spore-Based Bacterial Biosensors

Bacterial whole cell-based biosensors have been genetically engineered to achieve selective and reliable detection of a wide range of hazardous chemicals. Although whole-cell biosensors demonstrate many advantages for field-based detection of target analytes, there are still some challenges that need to be addressed. Most notably, their often modest shelf life and need for special handling and storage make them challenging to use in situations where access to reagents, instrumentation, and expertise are limited. These problems can be circumvented by developing biosensors in Bacillus spores, which can be engineered to address all of these concerns. In its sporulated state, a whole cell-based biosensor has a remarkably long life span and is exceptionally resistant to environmental insult. When these spores are germinated for use in analytical techniques, they show no loss in performance, even after long periods of storage under harsh conditions. In this chapter, we will discuss the development and use of whole cell-based sensors, their adaptation to spore-based biosensors, their current applications, and future directions in the field.

A new luminescent lanthanide supramolecular network possessing free Lewis base sites for highly selective and sensitive Cu2+ sensing

Illustration of the probable quenching mechanism and the qualitative/quantitative relationship between Tb luminescent intensity and the analyte concentration.

Artificial cell-cell communication as an emerging tool in synthetic biology applications

Cell-cell communication is a widespread phenomenon in nature, ranging from bacterial quorum sensing and fungal pheromone communication to cellular crosstalk in multicellular eukaryotes. These communication modes offer the possibility to control the behavior of an entire community by modifying the performance of individual cells in specific ways. Synthetic biology, i.e., the implementation of artificial functions within biological systems, is a promising approach towards the engineering of sophisticated, autonomous devices based on specifically functionalized cells. With the growing complexity of the functions performed by such systems, both the risk of circuit crosstalk and the metabolic burden resulting from the expression of numerous foreign genes are increasing. Therefore, systems based on a single type of cells are no longer feasible. Synthetic biology approaches with multiple subpopulations of specifically functionalized cells, wired by artificial cell-cell communication systems, provide an attractive and powerful alternative. Here we review recent applications of synthetic cell-cell communication systems with a specific focus on recent advances with fungal hosts.

New biosensor for detection of copper ions in water based on immobilized genetically modified yeast cells

Contamination of water by heavy metals represents a potential risk for both aquatic and terrestrial organisms, including humans. Heavy metals in water resources can come from various industrial activities, and drinking water can be ex-post contaminated by heavy metals such as Cu(2+) from house fittings (e.g., water reservoirs) and pipes. Here, we present a new copper biosensor capable of detecting copper ions at concentrations of 1-100 μM. This biosensor is based on cells of a specifically modified Saccharomyces cerevisiae strain immobilized in alginate beads. Depending on the concentration of copper, the biosensor beads change color from white, when copper is present in concentrations below the detection limit, to pink or red based on the increase in copper concentration. The biosensor was successfully tested in the determination of copper concentrations in real samples of water contaminated with copper ions. In contrast to analytical methods or other biosensors based on fluorescent proteins, the newly designed biosensor does not require specific equipment and allows the quick detection of copper in many parallel samples.

Heavy metal whole-cell biosensors using eukaryotic microorganisms: an updated critical review

This review analyzes the advantages and disadvantages of using eukaryotic microorganisms to design whole-cell biosensors (WCBs) for monitoring environmental heavy metal pollution in soil or aquatic habitats. Basic considerations for designing a eukaryotic WCB are also shown. A comparative analysis of the promoter genes used to design WCBs is carried out, and the sensitivity and reproducibility of the main reporter genes used is also reviewed. Three main eukaryotic taxonomic groups are considered: yeasts, microalgae, and ciliated protozoa. Models that have been widely analyzed as potential WCBs are the Saccharomyces cerevisiae model among yeasts, the Tetrahymena thermophila model for ciliates and Chlamydomonas model for microalgae. The advantages and disadvantages of each microbial group are discussed, and a ranking of sensitivity to the same type of metal pollutant from reported eukaryotic WCBs is also shown. General conclusions and possible future developments of eukaryotic WCBs are reported.

Whole-cell bioreporters for the detection of bioavailable metals

Whole-cell bioreporters are living microorganisms that produce a specific, quantifiable output in response to target chemicals. Typically, whole-cell bioreporters combine a sensor element for the substance of interest and a reporter element coding for an easily detectable protein. The sensor element is responsible for recognizing the presence of an analyte. In the case of metal bioreporters, the sensor element consists of a DNA promoter region for a metal-binding transcription factor fused to a promoterless reporter gene that encodes a signal-producing protein. In this review, we provide an overview of specific whole-cell bioreporters for heavy metals. Because the sensing of metals by bioreporter microorganisms is usually based on heavy metal resistance/homeostasis mechanisms, the basis of these mechanisms will also be discussed. The goal here is not to present a comprehensive summary of individual metal-specific bioreporters that have been constructed, but rather to express views on the theory and applications of metal-specific bioreporters and identify some directions for future research and development.

Fluorescent and bioluminescent cell-based sensors: strategies for their preservation

Luminescent whole-cell biosensing systems have been developed for a variety of analytes of environmental, clinical, and biological interest. These analytical tools allow for sensitive, rapid, simple, and inexpensive quantitative detection of target analytes. Furthermore, they can be designed to be nonspecific, semispecific, or highly specific/selective. A notable feature of such sensing systems employing living cells is that they provide information on the analyte bioavailability and activity. These characteristics, along with their suitability to miniaturization, make cell-based sensors ideal for field applications. However, a major limitation to on-site use is their "shelf-life." To address this problem, various methods for preservation of sensing cells have been reported, including freeze-drying, immobilization in different types of matrices, and formation of spores. Among these, the use of spores emerged as a promising strategy for long-term storage of whole-cell sensing systems at room temperature as well as in extreme environmental conditions.

The GEF1 proton-chloride exchanger affects tombusvirus replication via regulation of copper metabolism in yeast

Replication of plus-strand RNA viruses [(+)RNA viruses] is performed by viral replicases, whose function is affected by many cellular factors in infected cells. In this paper, we demonstrate a surprising role for Gef1p proton-chloride exchanger in replication of Tomato bushy stunt virus (TBSV) model (+)RNA virus. A genetic approach revealed that Gef1p, which is the only proton-chloride exchanger in Saccharomyces cerevisiae, is required for TBSV replication in the yeast model host. We also show that the in vitro activity of the purified tombusvirus replicase from gef1Δ yeast was low and that the in vitro assembly of the viral replicase in a cell extract was inhibited by the cytosolic fraction obtained from gef1Δ yeast. Altogether, our data reveal that Gef1p modulates TBSV replication via regulating Cu(2+) metabolism in the cell. This conclusion is supported by several lines of evidence, including the direct inhibitory effect of Cu(2+) ions on the in vitro assembly of the viral replicase, on the activity of the viral RNA-dependent RNA polymerase, and an inhibitory effect of deletion of CCC2 copper pump on TBSV replication in yeast, while altered iron metabolism did not reduce TBSV replication. In addition, applying a chloride channel blocker impeded TBSV replication in Nicotiana benthamiana protoplasts or in whole plants. Overall, blocking Gef1p function seems to inhibit TBSV replication through altering Cu(2+) ion metabolism in the cytosol, which then inhibits the normal functions of the viral replicase.

Microbial reporters of metal bioavailability

When attempting to assess the extent and the implications of environmental pollution, it is often essential to quantify not only the total concentration of the studied contaminant but also its bioavailable fraction: higher bioavailability, often correlated with increased mobility, signifies enhanced risk but may also facilitate bioremediation. Genetically engineered microorganisms, tailored to respond by a quantifiable signal to the presence of the target chemical(s), may serve as powerful tools for bioavailability assessment. This review summarizes the current knowledge on such microbial bioreporters designed to assay metal bioavailability. Numerous bacterial metal‐sensor strains have been developed over the past 15 years, displaying very high detection sensitivities for a broad spectrum of environmentally significant metal targets. These constructs are based on the use of a relatively small number of gene promoters as the sensing elements, and an even smaller selection of molecular reporter systems; they comprise a potentially useful panel of tools for simple and cost‐effective determination of the bioavailability of heavy metals in the environment, and for the quantification of the non‐bioavailable fraction of the pollutant. In spite of their inherent advantages, however, these tools have not yet been put to actual use in the evaluation of metal bioavailability in a real environmental remediation scheme. For this to happen, acceptance by regulatory authorities is essential, as is a standardization of assay conditions.

Whole-cell biosensors for detection of heavy metal ions in environmental samples based on metallothionein promoters from Tetrahymena thermophila

Heavy metals are among the most serious pollutants, and thus there is a need to develop sensitive and rapid biomonitoring methods for heavy metals in the environment. Critical parameters such as bioavailability, toxicity and genotoxicity cannot be tested using chemical analysis, but only can be assayed using living cells. A whole‐cell biosensor uses the whole cell as a single reporter incorporating both bioreceptor and transducer elements. In the present paper, we report results with two gene constructs using the Tetrahymena thermophila MTT1 and MTT5 metallothionein promoters linked with the eukaryotic luciferase gene as a reporter. This is the first report of a ciliated protozoan used as a heavy metal whole‐cell biosensor. T. thermophila transformed strains were created as heavy metal whole‐cell biosensors, and turn on bioassays were designed to detect, in about 2 h, the bioavailable heavy metals in polluted soil or aquatic samples. Validation of these whole‐cell biosensors was carried out using both artificial and natural samples, including methods for detecting false positives and negatives. Comparison with other published cell biosensors indicates that the Tetrahymena metallothionein promoter‐based biosensors appear to be the most sensitive eukaryotic metal biosensors and compare favourably with some prokaryotic biosensors as well.

The CRR1 nutritional copper sensor in Chlamydomonas contains two distinct metal-responsive domains

Copper response regulator 1 (CRR1), an SBP-domain transcription factor, is a global regulator of nutritional copper signaling in Chlamydomonas reinhardtii and activates genes necessary during periods of copper deficiency. We localized Chlamydomonas CRR1 to the nucleus in mustard (Sinapis alba) seedlings, a location consistent with its function as a transcription factor. The Zn binding SBP domain of CRR1 binds copper ions in vitro. Cu(I) can replace Zn(II), but the Cu(II) form is unstable. The DNA binding activity is inhibited in vitro by Cu(II) or Hg(II) ions, which also prevent activation of transcription in vivo, but not by Co(II) or Ni(II), which have no effect in vivo. Copper inhibition of DNA binding is reduced by mutation of a conserved His residue. These results implicate the SBP domain in copper sensing. Deletion of a C-terminal metallothionein-like Cys-rich domain impacted neither nutritional copper signaling nor the effect of mercuric supplementation, but rendered CRR1 insensitive to hypoxia and to nickel supplementation, which normally activate the copper deficiency regulon in wild-type cells. Strains carrying the crr1-ΔCys allele upregulate ZRT genes and hyperaccumulate Zn(II), suggesting that the effect of nickel ions may be revealing a role for the C-terminal domain of CRR1 in zinc homeostasis in Chlamydomonas.

Integration of spore-based genetically engineered whole-cell sensing systems into portable centrifugal microfluidic platforms

Bacterial whole-cell biosensing systems provide important information about the bioavailable amount of target analytes. They are characterized by high sensitivity and specificity/selectivity along with rapid response times and amenability to miniaturization as well as high-throughput analysis. Accordingly, they have been employed in various environmental and clinical applications. The use of spore-based sensing systems offers the unique advantage of long-term preservation of the sensing cells by taking advantage of the environmental resistance and ruggedness of bacterial spores. In this work, we have incorporated spore-based whole-cell sensing systems into centrifugal compact disk (CD) microfluidic platforms in order to develop a portable sensing system, which should enable the use of these hardy sensors for fast on-field analysis of compounds of interest. For that, we have employed two spore-based sensing systems for the detection of arsenite and zinc, respectively, and evaluated their analytical performance in the miniaturized microfluidic format. Furthermore, we have tested environmental and clinical samples on the CD microfluidic platforms using the spore-based sensors. Germination of spores and quantitative response to the analyte could be obtained in 2.5-3 h, depending on the sensing system, with detection limits of 1 x 10(-7) M for arsenite and 1 x 10(-6) M for zinc in both serum and fresh water samples. Incorporation of spore-based whole-cell biosensing systems on microfluidic platforms enabled the rapid and sensitive detection of the analytes and is expected to facilitate the on-site use of such sensing systems.

Whole-cell fluorescent biosensors for bioavailability and biodegradation of polychlorinated biphenyls

Whole-cell microbial biosensors are one of the newest molecular tools used in environmental monitoring. Such biosensors are constructed through fusing a reporter gene such as lux, gfp or lacZ, to a responsive promoter. There have been many reports of the applications of biosensors, particularly their use in assaying pollutant toxicity and bioavailability. This paper reviews the basic concepts behind the construction of whole-cell microbial biosensors for pollutant monitoring, and describes the applications of two such biosensors for detecting the bioavailability and biodegradation of Polychlorinated Biphenyls (PCBs).

Electrochemical cell-based sensors

One of the recently developed monitoring technologies involves the use of whole cell biosensors. Such biosensors can be constructed to detect expression of genes of interest and the effect of the environment on this expression. These biosensors are essential for monitoring environmental stress, such as general toxicity or specific toxicity caused by pollutants. Currently, a large spectrum of microbial biosensors have been developed that enable the monitoring of gene expression by measuring light, fluorescence, color, or electric current. The electrochemical monitoring is of special interest for in situ measurements as it can be performed using simple, compact, and mobile equipment and is easily adaptable for online measurements. Here we survey the potential application of electrochemical biosensors with special focus on monitoring environmental pollution.

Caulobacter crescentus as a whole-cell uranium biosensor

We engineered a strain of the bacterium Caulobacter crescentus to fluoresce in the presence of micromolar levels of uranium at ambient temperatures when it is exposed to a hand-held UV lamp. Previous microarray experiments revealed that several Caulobacter genes are significantly upregulated in response to uranium but not in response to other heavy metals. We designated one of these genes urcA (for uranium response in caulobacter). We constructed a reporter that utilizes the urcA promoter to produce a UV-excitable green fluorescent protein in the presence of the uranyl cation, a soluble form of uranium. This reporter is specific for uranium and has little cross specificity for nitrate (<400 microM), lead (<150 microM), cadmium (<48 microM), or chromium (<41.6 microM). The uranium reporter construct was effective for discriminating contaminated groundwater samples (4.2 microM uranium) from uncontaminated groundwater samples (<0.1 microM uranium) collected at the Oak Ridge Field Research Center. In contrast to other uranium detection methodologies, the Caulobacter reporter strain can provide on-demand usability in the field; it requires minimal sample processing and no equipment other than a hand-held UV lamp, and it may be sprayed directly on soil, groundwater, or industrial surfaces.

Development of a yeast biosensor–biocatalyst for the detection and biodegradation of the organophosphate paraoxon

Organophosphate (OP) poisoning can occur through unintentional exposure to OP pesticides, or by the deliberate release of OP nerve agents. Consequently, there is considerable interest in the development of systems that can detect and/or biodegrade these agents. The aim of this study was to generate a prototype fluorescent reporter yeast biosensor that could detect and biodegrade the model OP pesticide, paraoxon, and subsequently detect paraoxon hydrolysis. Saccharomyces cerevisiae was engineered to hydrolyze paraoxon through the heterologous expression of the Flavobacterium species opd (organophosphate degrading) gene. Global transcription profiling was subsequently used to identify yeast genes, which were induced in the presence of paraoxon, and genes, which were associated with paraoxon hydrolysis. Paraoxon-inducible genes and genes associated with paraoxon hydrolysis were identified. Candidate paraoxon-inducible promoters were cloned and fused to the yeast-enhanced green fluorescent protein (yEGFP), and candidate promoters associated with paraoxon hydrolysis were fused to the red fluorescent protein (yDsRed). The ability of the yeast biosensor to detect paraoxon and paraoxon hydrolysis was demonstrated by the specific induction of the fluorescent reporter (yEGFP and yDsRed, respectively). Biosensors responded to paraoxon in a dose- and time-dependent manner, and detection was rapid (15 to 30 min). yDsRed induction occurred only in the recombinant opd(+) strains suggesting that yDsRed induction was strictly associated with paraoxon hydrolysis. Together, these results indicate that the yeast biocatalyst-biosensor can detect and degrade paraoxon and potentially also monitor the decontamination process.

Biosensing environmental pollution

Whole-cell biosensors are finding increasing use for the detection of environmental pollution and toxicity. These biosensors are constructed through the fusion of promoters, responsive to the relevant environmental conditions, to easily monitored reporter genes. Depending on the choice of reporter gene, expression can be monitored by the production of colour, light, fluorescence or electrochemical reactions. Recent advances in this area have included the development of biosensors of compact size that enable the on-line and in situ monitoring of a large number of environmental parameters.

Development of RNR3- and RAD54-GUS reporters for testing genotoxicity in Saccharomyces cerevisiae

S. cerevisiae RNR3 and RAD54 gene transcription becomes strongly activated upon DNA damage. This property was used to construct yeast strains in which DNA damage can be monitored by a very sensitive fluorogenic assay in a convenient 96-well microtiter plate format. These strains carried stably integrated fusions of RNR3 or RAD54 promoters to the E. coli beta-glucuronidase GUS gene. GUS activity was measured by fluorogenic detection, a method that greatly increases the precision and sensitivity of the assay. Detection levels were similar to those of real-time quantitative PCR methods and close to the limits of biological response. The two reporters differed in terms of fold-induction, activation kinetics, sensitivity and specificity upon exposure to a variety of genotoxic compounds. While RNR3-GUS showed the fastest response, RAD54-GUS showed the highest sensitivity: similar to previous reported sensitivities for bacterial and eukaryotic genotoxic detection systems. These reporter strains may complement current genotoxicity tests, but they also have the advantages of higher flexibility, requirement for shorter incubation times, and the capability of being fully automated. In addition, the intrinsic features of the system facilitate its easy improvement by genetic manipulating the yeast strain or by introducing mammalian metabolizing enzymes.