Simulation of oxygen carrier mediated oxygen transport to C3A hepatoma cells housed within a hollow fiber bioreactor

A mechanobiological mathematical model of liver metabolism

The liver plays a complex role in metabolism and detoxification, and better tools are needed to understand its function and to develop liver-targeted therapies. In this study, we establish a mechanobiological model of liver transport and hepatocyte biology to elucidate the metabolism of urea and albumin, the production/detoxification of ammonia, and consumption of oxygen and nutrients. Since hepatocellular shear stress (SS) can influence the enzymatic activities of liver, the effect of SS on the urea and albumin synthesis are empirically modeled through the mechanotransduction mechanisms. The results demonstrate that the rheology and dynamics of the sinusoid flow can significantly affect liver metabolism. We show that perfusate rheology and blood hematocrit can affect urea and albumin production by changing hepatocyte mechanosensitive metabolism. The model can also simulate enzymatic diseases of the liver such as hyperammonemia I, hyperammonemia II, hyperarginemia, citrollinemia, and argininosuccinicaciduria, which disrupt the urea metabolism and ammonia detoxification. The model is also able to predict how aggregate cultures of hepatocytes differ from single cell cultures. We conclude that in vitro perfusable devices for the study of liver metabolism or personalized medicine should be designed with similar morphology and fluid dynamics as patient liver tissue. This robust model can be adapted to any type of hepatocyte culture to determine how hepatocyte viability, functionality, and metabolism are influenced by liver pathologies and environmental conditions.

High oxygen preservation hydrogels to augment cell survival under hypoxic condition

Cell therapy is a promising approach for ischemic tissue regeneration. However, high death rate of delivered cells under low oxygen condition, and poor cell retention in tissues largely limit the therapeutic efficacy. Using cell carriers with high oxygen preservation has potential to improve cell survival. To increase cell retention, cell carriers that can quickly solidify at 37 °C so as to efficiently immobilize the carriers and cells in the tissues are necessary. Yet there lacks cell carriers with these combined properties. In this work, we have developed a family of high oxygen preservation and fast gelation hydrogels based on N-isopropylacrylamide (NIPAAm) copolymers. The hydrogels were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization of NIPAAm, acrylate-oligolactide (AOLA), 2-hydroxyethyl methacrylate (HEMA), and methacrylate-poly(ethylene glycol)-perfluorooctane (MAPEGPFC). The hydrogel solutions exhibited sol-gel temperatures around room temperature and were flowable and injectable at 4°C. They can quickly solidify (≤6 s) at 37°C to form flexible gels. These hydrogels lost 9.4~29.4% of their mass after incubation in Dulbecco's Phosphate-Buffered Saline (DPBS) for 4 weeks. The hydrogels exhibited a greater oxygen partial pressure than DPBS after being transferred from a 21% O2 condition to a 1% O2 condition. When bone marrow mesenchymal stem cells (MSCs) were encapsulated in the hydrogels and cultured under 1% O2, the cells survived and proliferated during the 14-day culture period. In contrast, the cells experienced extensive death in the control hydrogel that had low oxygen preservation capability. The hydrogels possessed excellent biocompatibility. The final degradation products did not provoke cell death even when the concentration was as high as 15 mg/ml, and the hydrogel implantation did not induce substantial inflammation. These hydrogels are promising as cell carriers for cell transplantation into ischemic tissues. STATEMENT OF SIGNIFICANCE: Stem cell therapy for ischemic tissues experiences low therapeutic efficacy largely due to poor cell survival under low oxygen condition. Using cell carriers with high oxygen preservation capability has potential to improve cell survival. In this work, we have developed a family of hydrogels with this property. These hydrogels promoted the encapsulated stem cell survival and growth under low oxygen condition.

Mixtures of tense and relaxed state polymerized human hemoglobin regulate oxygen affinity and tissue construct oxygenation

Pure tense (T) and relaxed (R) quaternary state polymerized human hemoglobins (PolyhHbs) were synthesized and their biophysical properties characterized, along with mixtures of T- and R-state PolyhHbs. It was observed that the oxygen affinity of PolyhHb mixtures varied linearly with T-state mole fraction. Computational analysis of PolyhHb facilitated oxygenation of a single fiber in a hepatic hollow fiber (HF) bioreactor was performed to evaluate the oxygenation potential of T- and R-state PolyhHb mixtures. PolyhHb mixtures with T-state mole fractions greater than 50% resulted in hypoxic and hyperoxic zones occupying less than 5% of the total extra capillary space (ECS). Under these conditions, the ratio of the pericentral volume to the perivenous volume in the ECS doubled as the T-state mole fraction increased from 50 to 100%. These results show the effect of varying the T/R-state PolyhHb mole fraction on oxygenation of tissue-engineered constructs and their potential to oxygenate tissues.

Biomaterials for liver tissue engineering

Liver extracellular matrix (ECM) composition, topography and biomechanical properties influence cell-matrix interactions. The ECM presents guiding cues for hepatocyte phenotype maintenance, differentiation and proliferation both in vitro and in vivo. Current understanding of such cell-guiding cues along with advancement of techniques for scaffold fabrication has led to evolution of matrices for liver tissue culture from simple porous scaffolds to more complex 3D matrices with microarchitecture similar to in vivo. Natural and synthetic polymeric biomaterials fabricated in different topographies and porous matrices have been used for hepatocyte culture. Heterotypic and homotypic cell interactions are necessary for developing an adult liver as well as an artificial liver. A high oxygen demand of hepatocytes as well as graded oxygen distribution in liver is another challenging attribute of the normal liver architecture that further adds to the complexity of engineered substrate design. A balanced interplay of cell-matrix interactions along with cell-cell interactions and adequate supply of oxygen and nutrient determines the success of an engineered substrate for liver cells. Techniques devised to incorporate these features of hepatic function and mimic liver architecture range from maintaining liver cells in mm-sized tailor-made scaffolds to a more bottoms up approach that starts from building the microscopic subunit of the whole tissue. In this review, we discuss briefly various biomaterials used for liver tissue engineering with respect to design parameters such as scaffold composition and chemistry, biomechanical properties, topography, cell-cell interactions and oxygenation.

Simulation of NO and O2 transport facilitated by polymerized hemoglobin solutions in an arteriole that takes into account wall shear stress-induced NO production

A mathematical model was developed to study nitric oxide (NO) and oxygen (O(2)) transport in an arteriole and surrounding tissues exposed to a mixture of red blood cells (RBCs) and hemoglobin (Hb)-based O(2) carriers (HBOCs). A unique feature of this model is the inclusion of blood vessel wall shear stress-induced production of endothelial-derived NO, which is very sensitive to the viscosity of the RBC and HBOC mixture traversing the blood vessel lumen. Therefore in this study, a series of polymerized bovine Hb (PolyHb) solutions with high viscosity, varying O(2) affinities, NO dioxygenation rate constants and O(2) dissociation rate constants that were previously synthesized and characterized by our group was evaluated via mathematical modeling, in order to investigate the effect of these biophysical properties on the transport of NO and O(2) in an arteriole and its surrounding tissues subjected to anemia with the commercial HBOC Oxyglobin® and cell-free bovine Hb (bHb) serving as appropriate controls. The computer simulation results indicated that transfusion of high viscosity PolyHb solutions promoted blood vessel wall shear stress dependent generation of the vasodilator NO, especially in the blood vessel wall and should transport enough NO inside the smooth muscle layer to activate vasodilation compared to the commercial HBOC Oxyglobin® and cell-free bHb. However, NO scavenging in the arteriole lumen was unavoidable due to the intrinsic high NO dioxygenation rate constant of the HBOCs being studied. This study also observed that all PolyHbs could potentially improve tissue oxygenation under hypoxic conditions, while low O(2) affinity PolyHbs were more effective in oxygenating tissues under normoxic conditions compared with high O(2) affinity PolyHbs. In addition, all ultrahigh molecular weight PolyHbs displayed higher O(2) transfer rates than the commercial HBOC Oxyglobin® and cell-free bHb. Therefore, these results suggest that ultrahigh molecular weight PolyHb solutions could be used as safe and efficacious O(2) carriers for use in transfusion medicine. It also suggests that future generations of PolyHb solutions should possess lower NO dioxygenation reaction rate constants in order to reduce NO scavenging, while maintaining high solution viscosity to take advantage of wall shear stress-induced NO production. Taken together, we suggest that this mathematical model can be used to predict the vasoactivity of HBOCs and help guide the design and optimization of the next generation of HBOCs for use in transfusion medicine.

Current development of bioreactors for extracorporeal bioartificial liver (Review)

The research and development of extracorporeal bioartificial liver is gaining pace in recent years with the introduction of a myriad of optimally designed bioreactors with the ability to maintain long-term viability and liver-specific functions of hepatocytes. The design considerations for bioartificial liver are not trivial; it needs to consider factors such as the types of cell to be cultured in the bioreactor, the bioreactor configuration, the magnitude of fluid-induced shear stress, nutrients' supply, and wastes' removal, and other relevant issues before the bioreactor is ready for testing. This review discusses the exciting development of bioartificial liver devices, particularly the various types of cell used in current reactor designs, the state-of-the-art culturing and cryopreservation techniques, and the comparison among many today's bioreactor configurations. This review will also discuss in depth the importance of maintaining optimal mass transfer of nutrients and oxygen partial pressure in the bioreactor system. Finally, this review will discuss the commercially available bioreactors that are currently undergoing preclinical and clinical trials.

Hemoglobin regulates the metabolic, synthetic, detoxification, and biotransformation functions of hepatoma cells cultured in a hollow fiber bioreactor

Hepatic hollow fiber (HF) bioreactors constitute one type of extracorporeal bioartificial liver assist device (BLAD). Ideally, cultured hepatocytes in a BLAD should closely mimic the in vivo oxygenation environment of the liver sinusoid to yield a device with optimal performance. However, most BLADs, including hepatic HF bioreactors, suffer from O2 limited transport toward cultured hepatocytes, which reduces their performance. We hypothesize that supplementation of hemoglobin-based O2 carriers into the circulating cell culture medium of hepatic HF bioreactors is a feasible and effective strategy to improve bioreactor oxygenation and performance. We examined the effect of bovine hemoglobin (BvHb) supplementation (15g/L) in the circulating cell culture medium of hepatic HF bioreactors on hepatocyte proliferation, metabolism, and varied liver functions, including biosynthesis, detoxification, and biotransformation. It was observed that BvHb supplementation supported the maintenance of a higher cell mass in the extracapillary space, improved hepatocyte metabolic efficiency (i.e., hepatocytes consumed much less glucose), improved hepatocyte capacity for drug metabolism, and conserved both albumin synthesis and ammonia detoxification functions compared to controls (no BvHb supplementation) under the same experimental conditions.

Bioartificial liver devices: Perspectives on the state of the art

Acute liver failure remains a significant cause of morbidity and mortality. Bioartificial liver (BAL) devices have been in development for more than 20 years. Such devices aim to temporarily take over the metabolic and excretory functions of the liver until the patients' own liver has recovered or a donor liver becomes available for transplant. The important issues include the choice of cell materials and the design of the bioreactor. Ideal BAL cell materials should be of good viability and functionality, easy to access, and exclude immunoreactive and tumorigenic cell materials. Unfortunately, the current cells in use in BAL do not meet these requirements. One of the challenges in BAL development is the improvement of current materials; another key point concerning cell materials is the coculture of different cells. The bioreactor is an important component of BAL, because it determines the viability and function of the hepatocytes within it. From the perspective of bioengineering, a successful and clinically effective bioreactor should mimic the structure of the liver and provide an in vivo-like microenvironment for the growth of hepatocytes, thereby maintaining the cells' viability and function to the maximum extent. One future trend in the development of the bioreactor is to improve the oxygen supply system. Another direction for future research on bioreactors is the application of biomedical materials. In conclusion, BAL is, in principle, an important therapeutic strategy for patients with acute liver failure, and may also be a bridge to liver transplantation. It requires further research and development, however, before it can enter clinical practice.

Liver Cell Culture Devices

In the last 15 years many different liver cell culture devices, consisting of functional liver cells and artificial materials, have been developed. They have been devised for numerous different applications, such as temporary organ replacement (a bridge to liver transplantation or native liver regeneration) and as in vitro screening systems in the early stages of the drug development process, like assessing hepatotoxicity, hepatic drug metabolism, and induction/inhibition studies. Relevant literature is summarized about artificial human liver cell culture systems by scrutinizing PubMed from 2003 to 2009. Existing devices are divided in 2D configurations (e.g., static monolayer, sandwich, perfused cells, and flat plate) and 3D configurations (e.g., liver slices, spheroids, and different types of bioreactors). The essential features of an ideal liver cell culture system are discussed: different types of scaffolds, oxygenation systems, extracellular matrixes (natural and artificial), cocultures with nonparenchymal cells, and the role of shear stress problems. Finally, miniaturization and high-throughput systems are discussed. All these factors contribute in their own way to the viability and functionality of liver cells in culture. Depending on the aim for which they are designed, several good systems are available for predicting hepatotoxicity and hepatic metabolism within the general population. To predict hepatotoxicity in individual cases genomic analysis might be essential as well.

In vitro evaluation of a multi-layer radial-flow bioreactor based on galactosylated chitosan nanofiber scaffolds

Clinical use of bioartificial livers (BAL) strongly relies on the development of bioreactors. In this study, we developed a multi-layer radial-flow bioreactor based on galactosylated chitosan nanofiber scaffolds and evaluated its efficacy in vitro. The bioreactor contains 65 layers of stacked flat plates, on which the nanofiber scaffolds were electrospinned for hepatocyte immobilization and aggregation. Culture medium containing pig red blood cells (RBCs) was perfused from the center to periphery, so that exchange materials are sufficient to afford enough oxygen. We determined the parameters for hepatocyte-specific function and general metabolism and also measured the oxygen consumption rate (OCR). Microscope and scanned electron microscopy observation showed a tight adhesion between cells and scaffolds. Compared with the control (bioreactors without nanofiber scaffolds), the number of adhered cells in our bioreactor was 1.59-fold; the protein-synthesis capacity of hepatocytes was 1.73-fold and urea was 2.86-fold. Moreover, the OCR of bioreactors with RBCs was about 1.91-fold that of bioreactors without RBCs. The galactosylated chitosan nanofiber scaffolds introduced into our new bioreactor greatly enhanced cell adhesion and function, and the RBCs added into the culture medium were able to afford enough oxygen for hepatocytes. Importantly, our new bioreactor showed an exciting efficiency, and it may afford the short-term support of patients with hepatic failure.

Theoretical models of microvascular oxygen transport to tissue

To improve understanding of microvascular O(2) transport, theoretical modeling has been pursued for many years. The large number of studies in this area attests to the complexities (i.e., biochemical, structural, and hemodynamic) involved. This article focuses on theoretical studies from the last two decades and, in particular, on models of O(2) transport to tissue by discrete microvessels. A brief discussion of intravascular O(2) transport is first given, highlighting the physiological importance of intravascular resistance to blood-tissue O(2) transfer. This is followed by a description of the Krogh tissue cylinder model of O(2) transport by a single capillary, which is shown to remain relevant in modified forms that relax many of the original biophysical assumptions. However, there are many geometric and hemodynamic complexities that require the consideration of microvascular arrays and networks. Multivessel models are discussed that have shown the physiological importance of heterogeneities in vessel spacing, O(2) supply, red blood cell flow path, as well as interactions between capillaries and arterioles. These realistic models require sophisticated methods for solving the governing partial differential equations, and a range of solution techniques are described. Finally, the issue of experimental validation of microvascular O(2) delivery models is discussed, and new directions in O(2) transport modeling are outlined.

A high-yield method for generating mass-transfer gradients in elastomer microfluidics using impermeable capillaries

We demonstrated a robust, inexpensive method for fabricating high-throughput gas gradient generation devices which combined classic mass-transfer limited techniques with the versatility of elastomer microfluidics. The method allowed for dozens of replicate mass-transfer gradient experiments per day, including fabrication and assembly of devices. We demonstrated how our devices can be interfaced with microfluidics and how gradient parameters can be varied. In this work, we applied the method to characterize gradients of pH and cell viability generated in mass-transfer limited cultures of HeLa cells and observed the morphology of differentiating C2Cl2 myoblasts in an oxygen gradient.

Convection and hemoglobin-based oxygen carrier enhanced oxygen transport in a hepatic hollow fiber bioreactor

Hepatic hollow fiber bioreactors are a promising class of bioartificial liver assist device (BLAD). The development of this type of device is currently hindered by limited oxygen transport to cultured hepatocytes, due to low solubility of oxygen in aqueous media. In order to increase the oxygen spectrum to cultured hepatocytes housed within a hollow fiber bioreactor, several different engineering strategies were explored in this study. These included: supplementing the circulating media stream of the hollow fiber bioreactor with a hemoglobin-based oxygen carrier (bovine red blood cells) with defined oxygen binding and release kinetics and operating the bioreactor with media flow through the hollow fiber membrane into the extracapillary space (ECS). We hypothesize that these two strategies can be used to improve hepatocyte oxygenation and possibly attain an in vivo-like pO(2) spectrum, similar to that observed in vivo in the liver sinusoid. This work is significant, since provision of an in vivo-like pO(2) spectrum should create a fully functional BLAD that could potentially bridge thousands of liver failure patients towards native liver regeneration of damaged tissue or, if necessary, orthotopic liver transplantation.

Targeted Oxygen Delivery within Hepatic Hollow Fiber Bioreactors via Supplementation of Hemoglobin-Based Oxygen Carriers

Hepatic hollow fiber bioreactors are considered a promising class of bioartificial liver assist device (BLAD). Unfortunately, limited oxygen (O(2)) transport to hepatocytes within this device hinders further development. Hepatocytes in vivo (in the liver sinusoid) experience a wide range of oxygen tensions (pO(2) = 25-70 mmHg), which is important for development of proper differentiated function (zonation). Previously, we observed that bovine red blood cell (bRBC) supplementation of the circulating media stream enhanced oxygenation of cultured C3A hepatoma cells compared to a culture with no O(2) carrier (Gordon, J.; Palmer, A. F. Artif. Cells, BloodSubstitutes, Biotechnol. 2006, 33 (3), 297-306). Despite this success, the cells were not exposed to the desired in vivo O(2) spectrum (Sullivan, J.; Gordon, J.; Palmer, A. Biotechnol. Bioeng. 2006, 93 (2) 306-317). We hypothesize that altering the kinetics of O(2) binding/release to/from hemoglobin-based O(2) carriers (HBOCs) could potentially target O(2) delivery to cell cultures. High P(50) (low O(2) affinity) HBOCs preferentially targeted O(2) delivery at high inlet pO(2) values. Conversely, low P(50) (high O(2) affinity) HBOCs targeted O(2) delivery at low inlet pO(2) values. Additionally, inlet pO(2), flow rate, and HBOC concentration were varied to find optimal bioreactor operating conditions. Our results demonstrate that HBOCs can enhance O(2) delivery to cultured hepatocytes, while exposing them to in vivo-like O(2) tensions, which is critical to create a fully functional BLAD.

Targeted O2 delivery by blood substitutes: in vitro arteriolar simulations of first- and second-generation products

The O(2) transport from mixtures of commercially produced hemoglobin-based O(2) carriers (HBOCs) and red blood cells (RBCs) flowing through arteriolar-sized (25-mum) conduits is simulated. A generalized treatment of extraluminal O(2) transport processes is used to reflect variations in physiological conditions, such as increased O(2) consumption. Of the HBOCs considered, polymerized bovine hemoglobin (PolyBvHb, p50=54 mmHg), tetrameric cross-linked human hemoglobin (alphaalphaHb, p50=33 mmHg), and PEGylated human hemoglobin (MP4, p50=5 mmHg), only MP4 does not increase O(2) extraction ratios when compared to RBC suspensions alone. A reduction in arteriolar O(2) extraction is likely to be beneficial for HBOCs by preventing O(2)-induced vasoactivity and maximizing the supply of O(2) available to the capillaries. Results from in vivo HBOC transfusion experiments cannot be predicted by the model, unless PolyBvHb has a significant decrease in extraluminal O(2) transport resistance as compared to MP4. This result is consistent with the literature that shows arteriolar O(2) consumption to increase with intravascular pO(2).

Enhanced oxygen delivery to primary hepatocytes within a hollow fiber bioreactor facilitated via hemoglobin-based oxygen carriers

The production of a fully functional bioartificial liver assist device (BLAD) would greatly enhance available treatment options for patients suffering from acute liver failure. Currently, inadequate oxygen provision to hepatocytes seeded within hollow fiber bioreactors hampers development of a viable hollow fiber-based BLAD. Experimentally, oxygen provision to primary rat hepatocytes cultured within hollow fiber bioreactors was measured, it was observed that supplementation with an oxygen carrier (bovine red blood cells at approximately 2% human hematocrit) did not significantly improve oxygenation compared to the absence of an oxygen carrier. Therefore, an oxygen transport model of an individual hollow fiber within the bioreactor was developed and simulated (up to approximately 10% human hematocrit) to more fully examine the effect of oxygen carrier supplementation on oxygenation within the bioreactor. The modeling analysis, supported via the experimental results, was utilized to predict optimal bioreactor operating conditions for the delivery of in vivo-like oxygen gradients to cultured hepatocytes in clinically relevant settings.

Hemoglobin-based O2 carrier O2 affinity and capillary inlet pO2 are important factors that influence O2 transport in a capillary

Hemopure (Biopure; Cambridge, MA) and PolyHeme (Northfield Laboratories; Evanston, IL) are two acellular hemoglobin-based O2 carriers (HBOCs) currently in phase III clinical trials for use as red blood cell substitutes. The most common adverse side effect that these HBOCs exhibit is increased vasoconstriction. Autoregulatory theory has been presented as a possible explanation for this physiological effect, where it is hypothesized that low-affinity HBOCs over-deliver O2 to tissues surrounding arterioles, thereby eliciting vasoconstriction. In this paper, we wanted to investigate HBOC oxygenation of tissue surrounding a capillary, which is the smallest element of the circulatory system. An a priori model has been developed in which the performance of mixtures of acellular HBOCs (synthesized by our group and others) and human red blood cells (hRBCs) has been simulated using a Krogh tissue cylinder model (KTCM) comprising a capillary surrounded by a capillary membrane and skeletal muscle tissue in cylindrical coordinates with specified tissue O2 consumption rates and Michaelis-Menten kinetics. In this study, the total hemoglobin (hRBCs and HBOCs) concentration was kept constant. The HBOCs studied possessed O2 affinities that were higher and lower compared to hRBCs (P50's spanned 5-55 mmHg), and the equilibrium binding/release of oxygen to/from the HBOCs was modeled using the Adair equation. At normoxic inlet pO2's, there was no correlation between O2 flux out of the capillary and the O2 affinity of the HBOC. However, a correlation was found between the average pO2 tension in the capillary and the O2 affinity of the HBOC. Additionally, we studied the change in the O2 equilibrium curve of HBOCs with different O2 affinities over a wide range of inlet pO2's and found that changing the inlet pO2 greatly affected which HBOC, having a unique O2 affinity, best delivered O2 to the surrounding tissue. The analysis of oxygen transport presented could lead to a better prediction of which acellular HBOC is best suited for a specific transfusion application that many times depends on the capillary inlet pO2 tension.

Purification of bovine hemoglobin via fast performance liquid chromatography

Bovine hemoglobin (bHb) was purified from bovine red blood cells (bRBCs) via anion exchange chromatography preceded by dialysis. This is a fast and effective way to obtain bHb from bRBCs using Q Sepharose XL, a strong anion exchange resin. This resin had double the binding capacity for bHb compared to three other anion exchange resins that were studied in this work. Methemoglobin levels remained below 2% with bHb concentrations between 0.7 and 1.7 mM. The high purity of bHb was confirmed via SDS-PAGE and size exclusion chromatography (SEC).

Conjugation of methoxypolyethylene glycol to the surface of bovine red blood cells

Methoxypolyethylene glycol (mPEG) covalently bound to the surface of human red blood cells (hRBCs) has been shown to decrease immunological recognition of hRBC surface antigens (Bradley et al., 2002). However, there is an increasing shortage of hRBC donations, thus making hRBCs scarce and expensive (Davey, 2004; Riess, 2001). The goal of this study is to similarly PEGylate the surface of bovine RBCs (bRBCs) with the aim of reducing the demand on human blood donations needed for blood transfusions. This study investigates the feasibility of modifying the surface of bRBCs with the succinimidyl ester of methoxypolyethylene glycol propionic acid (SPA-mPEG) for use as a potential blood substitute. The oxygen binding affinity of PEGylated bRBCs was moderately increased with increasing initial SPA-mPEG concentrations up to 4 mM when reacted with bRBCs at a hematocrit of 12%. Oxygen transport simulations verified that SPA-mPEG conjugated bRBCs could still transport oxygen to pancreatic islet tissues even under extreme conditions. PEGylated bRBCs reconstituted to a hematocrit of 40% exhibited viscosities on the order of approximately 3 cp, similar to hRBCs at the same hematocrit. Taken together, the results of this study demonstrate the success of PEGylating bRBCs to yield modified cells with oxygen binding, transport and flow properties similar to that of hRBCs.

Enhancing oxygen tension and cellular function in alginate cell encapsulation devices through the use of perfluorocarbons

Encapsulation devices are often hindered by the inability to achieve sufficient oxygen levels for sustaining long-term cell survival both in vivo and in vitro. We have investigated the use of synthetic oxygen carriers in alginate gels to improve metabolic activity and viability of HepG2 cells over time. Perfluorocarbons (PFCs), specifically perfluorotributylamine (PFTBA) and perfluorooctylbromide (PFOB), were emulsified with alginate and used to encapsulate HepG2 cells in a spherical geometry. Cellular state was assessed using the MTT assay and Live/Dead stain as well as through analysis of both lactate and lactate dehydrogenase (LDH) levels which are indirect indicators of oxygen availability. Addition of 1% surfactant resulted in stable emulsions with evenly dispersed PFC droplets of the order of 1-2 microm in diameter, with no influence on cell viability. Both PFCs evaluated were effective in increasing cellular metabolic activity over alginate-only gels. The presence of 10% PFOB significantly increased cellular growth rate by 10% and reduced both intracellular LDH and extracellular lactate levels by 20-40%, improving glucose utilization efficiency. The characteristic drop in cellular metabolic activity upon encapsulation was eliminated with addition of 10% PFC and viability was better maintained throughout the bead, with a significant decrease in necrotic core size. Results were consistent under a physiologically relevant 5% oxygen environment. The incorporation of PFC synthetic oxygen carriers into encapsulation matrices has been successfully applied to improve cell function and viability with implication for a variety of tissue engineering applications.