Membrane fouling by cell-protein mixtures: In situ characterisation using multi-photon microscopy

Identification of effluent organic matter fractions responsible for low-pressure membrane fouling

Anion exchange resin (AER), powder activated carbon (PAC) adsorption and ozonation treatments were applied on biologically treated wastewater effluent with the objective to modify the effluent organic matter (EfOM) matrix. Both AER and PAC led to significant total organic carbon (TOC) removal, while the TOC remained nearly constant after ozonation. Liquid Chromatography-Organic Carbon Detection (LC-OCD) analysis showed that the AER treatment preferentially removed high and intermediate molecular weight (MW) humic-like structures while PAC removed low MW compounds. Only a small reduction of the high MW colloids (i.e. biopolymers) was observed for AER and PAC treatments. Ozonation induced a large reduction of the biopolymers and an important increase of the low MW humic substances (i.e. building blocks). Single-cycle microfiltration (MF) and ultrafiltration (UF) tests were conducted using commercially available hollow fibres at a constant flux. After reconcentration to their original organic carbon content, the EfOM matrix modified by AER and PAC treatments exhibited higher UF membrane fouling compared to untreated effluent; result that correlated with the higher concentration of biopolymers. On the contrary, ozonation which induced a significant degradation of the biopolymers led to a minor flux reduction for both UF and MF filtration tests. Based on a single filtration, results indicate that biopolymers play a major role in low pressure membrane fouling and that intermediate and low MW compounds have minor impact. Thus, this approach has shown to be a valid methodology to identify the foulant fractions of EfOM.

A methodological approach to scaling up fermentation and primary recovery processes to the manufacturing scale for vaccine production

As the fermentation process is scaled up, the mass-transfer and nutritional requirements are to be maintained in improving antigen yields upon scale-up. A methodology is adopted to scale-down the processes at the laboratory level in order to further optimize the hydrodynamic and nutritional requirements of the bacteria prior to scaling up. For recovery of bacterial proteins, several micro-filtration techniques are discussed. An optimized process consisting of cross-flow micro-filtration, homogenization and batch clarification using ion-exchange resins is used.

Recent advances in membrane bioreactors (MBRs): membrane fouling and membrane material

Membrane bioreactors (MBRs) have been actively employed for municipal and industrial wastewater treatments. So far, membrane fouling and the high cost of membranes are main obstacles for wider application of MBRs. Over the past few years, considerable investigations have been performed to understand MBR fouling in detail and to develop high-flux or low-cost membranes. This review attempted to address the recent and current developments in MBRs on the basis of reported literature in order to provide more detailed information about MBRs. In this paper, the fouling behaviour, fouling factors and fouling control strategies were discussed. Recent developments in membrane materials including low-cost filters, membrane modification and dynamic membranes were also reviewed. Lastly, the future trends in membrane fouling research and membrane material development in the coming years were addressed.