1
|
Goto R, Nakahata M, Delattre C, Petit E, El Boutachfaiti R, Sakai S. Fabrication of cell-laden microbeads and microcapsules composed of bacterial polyglucuronic acid. Int J Biol Macromol 2023:125481. [PMID: 37343612 DOI: 10.1016/j.ijbiomac.2023.125481] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/12/2023] [Revised: 06/07/2023] [Accepted: 06/17/2023] [Indexed: 06/23/2023]
Abstract
In the past decades, the microencapsulation of mammalian cells into microparticles has been extensively studied for various in vitro and in vivo applications. The aim of this study was to demonstrate the viability of bacterial polyglucuronic acid (PGU), an exopolysaccharide derived from bacteria and composed of glucuronic acid units, as an effective material for cell microencapsulation. Using the method of dropping an aqueous solution of PGU-containing cells into a Ca2+-loaded solution, we produced spherical PGU microbeads with >93 % viability in the encapsulated human hepatoma HepG2 cells. Hollow-core microcapsules were formed via polyelectrolyte complex layer formation of PGU and poly-l-lysine, after which Ca2+, a cross-linker of PGU, was chelated, and this was accomplished by sequential immersion of microbeads in aqueous solutions of poly-l-lysine and sodium citrate. The encapsulated HepG2 cells proliferated and formed cell aggregates within the microparticles over a 14-day culture, with significantly larger aggregates forming within the microcapsules. Our results provide evidence for the viability of PGU for cell microencapsulation for the first time, thereby contributing to advancements in tissue engineering.
Collapse
Affiliation(s)
- Ryota Goto
- Department of Materials Engineering Science, Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama-Cho, Toyonaka, Osaka 560-8531, Japan.
| | - Masaki Nakahata
- Department of Macromolecular Science, Graduate School of Science, Osaka University, Toyonaka 560-0043, Japan.
| | - Cédric Delattre
- Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal, F-63000 Clermont-Ferrand, France; Institut Universitaire de France (IUF), 1 Rue Descartes, 75005 Paris, France.
| | - Emmanuel Petit
- UMRT INRAE 1158 BioEcoAgro - BIOPI Biologie des Plantes et Innovation, IUT d'Amiens, Université de Picardie Jules Verne, Amiens, France.
| | - Redouan El Boutachfaiti
- UMRT INRAE 1158 BioEcoAgro - BIOPI Biologie des Plantes et Innovation, IUT d'Amiens, Université de Picardie Jules Verne, Amiens, France.
| | - Shinji Sakai
- Department of Materials Engineering Science, Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama-Cho, Toyonaka, Osaka 560-8531, Japan.
| |
Collapse
|
2
|
Kabalan Y, Montané X, Tylkowski B, De la Flor S, Giamberini M. Design and assembly of biodegradable capsules based on alginate hydrogel composite for the encapsulation of blue dye. Int J Biol Macromol 2023; 233:123530. [PMID: 36736972 DOI: 10.1016/j.ijbiomac.2023.123530] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2022] [Revised: 01/20/2023] [Accepted: 01/30/2023] [Indexed: 02/05/2023]
Abstract
The encapsulation of bluing agents in biodegradable polymeric capsules is an emerging option in laundry detergents sector to substitute formaldehyde-based polymers, because they are non-biodegradable, carcinogenic and toxic. In this work, we present for the first time the successful encapsulation of a blue dye in biodegradable capsules which shell was formed by an alginate hydrogel and a polyethylene glycol network. Different types of capsules were synthesized (addition or not of the diacrylate monomer) and irradiation of the crosslinking solution at different times. Furthermore, a deep characterization of each type of capsules was performed (chemical and morphological characterization, assessment of their mechanical and thermal properties, evaluation of their biodegradability), noting that the incorporation of the diacrylate monomer (PEGDMA) and the two different irradiation times selected substantially affected the final properties of the capsules. The obtained results will serve to comprehend how the dye can be released from the capsules.
Collapse
Affiliation(s)
- Yasmin Kabalan
- Department of Chemical Engineering, Universitat Rovira i Virgili, Av. Països Catalans 26, Campus Sescelades, 43007 Tarragona, Spain
| | - Xavier Montané
- Department of Analytical Chemistry and Organic Chemistry, Universitat Rovira i Virgili, C/Marcel·lí Domingo 1, 43007 Tarragona, Spain.
| | - Bartosz Tylkowski
- Eurecat, Centre Tecnològic de la Química de Catalunya, C/Marcel·lí Domingo s/n, 43007 Tarragona, Spain
| | - Silvia De la Flor
- Department of Mechanical Engineering, Universitat Rovira i Virgili, Av. Països Catalans 26, Campus Sescelades, 43007 Tarragona, Spain
| | - Marta Giamberini
- Department of Chemical Engineering, Universitat Rovira i Virgili, Av. Països Catalans 26, Campus Sescelades, 43007 Tarragona, Spain
| |
Collapse
|
3
|
Rojek K, Ćwiklińska M, Kuczak J, Guzowski J. Microfluidic Formulation of Topological Hydrogels for Microtissue Engineering. Chem Rev 2022; 122:16839-16909. [PMID: 36108106 PMCID: PMC9706502 DOI: 10.1021/acs.chemrev.1c00798] [Citation(s) in RCA: 32] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
Abstract
Microfluidics has recently emerged as a powerful tool in generation of submillimeter-sized cell aggregates capable of performing tissue-specific functions, so-called microtissues, for applications in drug testing, regenerative medicine, and cell therapies. In this work, we review the most recent advances in the field, with particular focus on the formulation of cell-encapsulating microgels of small "dimensionalities": "0D" (particles), "1D" (fibers), "2D" (sheets), etc., and with nontrivial internal topologies, typically consisting of multiple compartments loaded with different types of cells and/or biopolymers. Such structures, which we refer to as topological hydrogels or topological microgels (examples including core-shell or Janus microbeads and microfibers, hollow or porous microstructures, or granular hydrogels) can be precisely tailored with high reproducibility and throughput by using microfluidics and used to provide controlled "initial conditions" for cell proliferation and maturation into functional tissue-like microstructures. Microfluidic methods of formulation of topological biomaterials have enabled significant progress in engineering of miniature tissues and organs, such as pancreas, liver, muscle, bone, heart, neural tissue, or vasculature, as well as in fabrication of tailored microenvironments for stem-cell expansion and differentiation, or in cancer modeling, including generation of vascularized tumors for personalized drug testing. We review the available microfluidic fabrication methods by exploiting various cross-linking mechanisms and various routes toward compartmentalization and critically discuss the available tissue-specific applications. Finally, we list the remaining challenges such as simplification of the microfluidic workflow for its widespread use in biomedical research, bench-to-bedside transition including production upscaling, further in vivo validation, generation of more precise organ-like models, as well as incorporation of induced pluripotent stem cells as a step toward clinical applications.
Collapse
|
4
|
Ding SL, Liu X, Zhao XY, Wang KT, Xiong W, Gao ZL, Sun CY, Jia MX, Li C, Gu Q, Zhang MZ. Microcarriers in application for cartilage tissue engineering: Recent progress and challenges. Bioact Mater 2022; 17:81-108. [PMID: 35386447 PMCID: PMC8958326 DOI: 10.1016/j.bioactmat.2022.01.033] [Citation(s) in RCA: 25] [Impact Index Per Article: 12.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/01/2021] [Revised: 01/18/2022] [Accepted: 01/19/2022] [Indexed: 12/11/2022] Open
Abstract
Successful regeneration of cartilage tissue at a clinical scale has been a tremendous challenge in the past decades. Microcarriers (MCs), usually used for cell and drug delivery, have been studied broadly across a wide range of medical fields, especially the cartilage tissue engineering (TE). Notably, microcarrier systems provide an attractive method for regulating cell phenotype and microtissue maturations, they also serve as powerful injectable carriers and are combined with new technologies for cartilage regeneration. In this review, we introduced the typical methods to fabricate various types of microcarriers and discussed the appropriate materials for microcarriers. Furthermore, we highlighted recent progress of applications and general design principle for microcarriers. Finally, we summarized the current challenges and promising prospects of microcarrier-based systems for medical applications. Overall, this review provides comprehensive and systematic guidelines for the rational design and applications of microcarriers in cartilage TE. This review summarized fabrication techniques and cartilage repaired application of microcarriers. The appropriate materials and design principle for microcarriers in cartilage tissue engineering are discussed. Promising future perspectives and challenges in microcarriers fields are outlined.
Collapse
|
5
|
Aoki H, Masahiro Y, Shimizu M, Hongoh Y, Ohkuma M, Yamagata Y. Agarose gel microcapsules enable easy-to-prepare, picolitre-scale, single-cell genomics, yielding high-coverage genome sequences. Sci Rep 2022; 12:17014. [PMID: 36257967 PMCID: PMC9579161 DOI: 10.1038/s41598-022-20923-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/19/2022] [Accepted: 09/21/2022] [Indexed: 12/29/2022] Open
Abstract
A novel type of agarose gel microcapsule (AGM), consisting of an alginate picolitre sol core and an agarose gel shell, was developed to obtain high-quality, single-cell, amplified genomic DNA of bacteria. The AGM is easy to prepare in a stable emulsion with oil of water-equivalent density, which prevents AGM aggregation, with only standard laboratory equipment. Single cells from a pure culture of Escherichia coli, a mock community comprising 15 strains of human gut bacteria, and a termite gut bacterial community were encapsulated within AGMs, and their genomic DNA samples were prepared with massively parallel amplifications in a tube. The genome sequencing did not need second-round amplification and showed an average genome completeness that was much higher than that obtained using a conventional amplification method on the microlitre scale, regardless of the genomic guanine-cytosine content. Our novel method using AGM will allow many researchers to perform single-cell genomics easily and effectively, and can accelerate genomic analysis of yet-uncultured microorganisms.
Collapse
Affiliation(s)
- Hiroyoshi Aoki
- grid.509457.aUltrahigh Precision Optics Technology Team, Advanced Photonics Technology Group, RIKEN Center for Advanced Photonics, 3-1, Hirosawa, Wako, Saitama 351-0198 Japan
| | - Yuki Masahiro
- grid.509462.cJapan Collection of Microorganisms (JCM), RIKEN BioResource Research Center, 3-1-1, Koyadai, Tsukuba, Ibaraki 305-0074 Japan
| | - Michiru Shimizu
- grid.509462.cJapan Collection of Microorganisms (JCM), RIKEN BioResource Research Center, 3-1-1, Koyadai, Tsukuba, Ibaraki 305-0074 Japan
| | - Yuichi Hongoh
- grid.509462.cJapan Collection of Microorganisms (JCM), RIKEN BioResource Research Center, 3-1-1, Koyadai, Tsukuba, Ibaraki 305-0074 Japan ,grid.32197.3e0000 0001 2179 2105School of Life Science and Technology, Tokyo Institute of Technology, Tokyo, Japan
| | - Moriya Ohkuma
- grid.509462.cJapan Collection of Microorganisms (JCM), RIKEN BioResource Research Center, 3-1-1, Koyadai, Tsukuba, Ibaraki 305-0074 Japan
| | - Yutaka Yamagata
- grid.509457.aUltrahigh Precision Optics Technology Team, Advanced Photonics Technology Group, RIKEN Center for Advanced Photonics, 3-1, Hirosawa, Wako, Saitama 351-0198 Japan
| |
Collapse
|
6
|
Abstract
Regenerative medicine is a novel scientific field that employs the use of stem cells as cell-based therapy for the regeneration and functional restoration of damaged tissues and organs. Stem cells bear characteristics such as the capacity for self-renewal and differentiation towards specific lineages and, therefore, serve as a backup reservoir in case of tissue injuries. Therapeutically, they can be autologously or allogeneically transplanted for tissue regeneration; however, allogeneic stem cell transplantation can provoke host immune responses leading to a host-versus-transplant reaction. A probable solution to this problem is stem cell encapsulation, a technique that utilizes various biomaterials for the creation of a semi-permeable membrane that encases the stem cells. Stem cell encapsulation can be accomplished by employing a great variety of natural and/or synthetic hydrogels and offers many benefits in regenerative medicine, including protection from the host’s immune system and mechanical stress, improved cell viability, proliferation and differentiation, cryopreservation and controlled and continuous delivery of the stem-cell-secreted therapeutic agents. Here, in this review, we report and discuss almost all natural and synthetic hydrogels used in stem cell encapsulation, along with the benefits that these materials, alone or in combination, could offer to cell therapy through functional cell encapsulation.
Collapse
|
7
|
Tenje M, Cantoni F, Porras Hernández AM, Searle SS, Johansson S, Barbe L, Antfolk M, Pohlit H. A practical guide to microfabrication and patterning of hydrogels for biomimetic cell culture scaffolds. ACTA ACUST UNITED AC 2020. [DOI: 10.1016/j.ooc.2020.100003] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
|
8
|
Jo YK, Lee D. Biopolymer Microparticles Prepared by Microfluidics for Biomedical Applications. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2020; 16:e1903736. [PMID: 31559690 DOI: 10.1002/smll.201903736] [Citation(s) in RCA: 56] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/13/2019] [Revised: 08/31/2019] [Indexed: 06/10/2023]
Abstract
Biopolymers are macromolecules that are derived from natural sources and have attractive properties for a plethora of biomedical applications due to their biocompatibility, biodegradability, low antigenicity, and high bioactivity. Microfluidics has emerged as a powerful approach for fabricating polymeric microparticles (MPs) with designed structures and compositions through precise manipulation of multiphasic flows at the microscale. The synergistic combination of materials chemistry afforded by biopolymers and precision provided by microfluidic capabilities make it possible to design engineered biopolymer-based MPs with well-defined physicochemical properties that are capable of enabling an efficient delivery of therapeutics, 3D culture of cells, and sensing of biomolecules. Here, an overview of microfluidic approaches is provided for the design and fabrication of functional MPs from three classes of biopolymers including polysaccharides, proteins, and microbial polymers, and their advances for biomedical applications are highlighted. An outlook into the future research on microfluidically-produced biopolymer MPs for biomedical applications is also provided.
Collapse
Affiliation(s)
- Yun Kee Jo
- Department of Chemical and Biomolecular Engineering, School of Engineering and Applied Science, University of Pennsylvania, Philadelphia, PA, 19104, USA
| | - Daeyeon Lee
- Department of Chemical and Biomolecular Engineering, School of Engineering and Applied Science, University of Pennsylvania, Philadelphia, PA, 19104, USA
| |
Collapse
|
9
|
Growth of hollow cell spheroids in microbead templated chambers. Biomaterials 2017; 143:57-64. [PMID: 28763630 DOI: 10.1016/j.biomaterials.2017.07.031] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2017] [Revised: 07/20/2017] [Accepted: 07/22/2017] [Indexed: 02/02/2023]
Abstract
Cells form hollow, spheroidal structures during the development of many tissues, including the ocular lens, inner ear, and many glands. Therefore, techniques for in vitro formation of hollow spheroids are valued for studying developmental and disease processes. Current in vitro methods require cells to self-organize into hollow morphologies; we explored an alternative strategy based on cell growth in predefined, spherical scaffolds. Our method uses sacrificial, gelatin microbeads to simultaneously template spherical chambers within a hydrogel and deliver cells into the chambers. We use mouse lens epithelial cells to demonstrate that cells can populate the internal surfaces of the chambers within a week to create numerous hollow spheroids. The platform supports manipulation of matrix mechanics, curvature, and biochemical composition to mimic in vivo microenvironments. It also provides a starting point for engineering organoids of tissues that develop from hollow spheroids.
Collapse
|
10
|
Patel R, Patel M, Kwak J, Iyer AK, Karpoormath R, Desai S, Rarh V. Polymeric microspheres: a delivery system for osteogenic differentiation. POLYM ADVAN TECHNOL 2017. [DOI: 10.1002/pat.4084] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Affiliation(s)
- Rajkumar Patel
- School of Electrical and Computer Engineering; The University of Seoul; Seoul 02504 Korea
| | - Madhumita Patel
- Department of Chemistry and Nano Science; Ewha Womans University; Seodaemun-gu Seoul 120-750 South Korea
| | - Jeonghun Kwak
- School of Electrical and Computer Engineering; The University of Seoul; Seoul 02504 Korea
| | - Arun K. Iyer
- Use-inspired Biomaterials & Integrated Nano Delivery (U-Bind) Systems Laboratory, Department of Pharmaceutical Sciences, Eugene Applebaum College of Pharmacy and Health, Sciences; Wayne State University; 259 Mack Ave Detroit MI 48201 USA
| | - Rajshekhar Karpoormath
- Department of Pharmaceutical Chemistry, College of Health Sciences; University of Kwa Zulu Natal; Durban 4000 Africa
| | - Shrojal Desai
- Global Infusion Systems R&D at Hospira; Chicago, IL USA
| | - Vimal Rarh
- Department of Chemistry, S.G.T.B. Khalsa College; University of Delhi; Delhi 110007 India
| |
Collapse
|
11
|
Cell fiber-based three-dimensional culture system for highly efficient expansion of human induced pluripotent stem cells. Sci Rep 2017; 7:2850. [PMID: 28588295 PMCID: PMC5460280 DOI: 10.1038/s41598-017-03246-2] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/14/2017] [Accepted: 04/21/2017] [Indexed: 12/12/2022] Open
Abstract
Human pluripotent stem cells are a potentially powerful cellular resource for application in regenerative medicine. Because such applications require large numbers of human pluripotent stem cell-derived cells, a scalable culture system of human pluripotent stem cell needs to be developed. Several suspension culture systems for human pluripotent stem cell expansion exist; however, it is difficult to control the thickness of cell aggregations in these systems, leading to increased cell death likely caused by limited diffusion of gases and nutrients into the aggregations. Here, we describe a scalable culture system using the cell fiber technology for the expansion of human induced pluripotent stem (iPS) cells. The cells were encapsulated and cultured within the core region of core-shell hydrogel microfibers, resulting in the formation of rod-shaped or fiber-shaped cell aggregations with sustained thickness and high viability. By encapsulating the cells with type I collagen, we demonstrated a long-term culture of the cells by serial passaging at a high expansion rate (14-fold in four days) while retaining its pluripotency. Therefore, our culture system could be used for large-scale expansion of human pluripotent stem cells for use in regenerative medicine.
Collapse
|
12
|
He X. Microscale Biomaterials with Bioinspired Complexity of Early Embryo Development and in the Ovary for Tissue Engineering and Regenerative Medicine. ACS Biomater Sci Eng 2016; 3:2692-2701. [PMID: 29367949 DOI: 10.1021/acsbiomaterials.6b00540] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
Abstract
Tissue engineering and regenerative medicine (TERM) are attracting more and more attention for treating various diseases in modern medicine. Various biomaterials including hydrogels and scaffolds have been developed to prepare cells (particularly stem cells) and tissues under 3D conditions for TERM applications. Although these biomaterials are usually homogeneous in early studies, effort has been made recently to generate biomaterials with the spatiotemporal complexities present in the native milieu of the specific cells and tissues under investigation. In this communication, the microfluidic and coaxial electrospray approaches that we used for generating microscale biomaterials with the spatial complexity of both pre-hatching embryos and ovary in the female reproductive system were introduced. This is followed by an overview of our recent work on applying the resultant bioinspired biomaterials for cultivation of normal and cancer stem cells, regeneration of cardiac tissue, and culture of ovarian follicles. The cardiac regeneration studies show the importance of using different biomaterials to engineer stem cells at different stages (i.e., in vitro culture versus in vivo implantation) for tissue regeneration. All the studies demonstrate the merit of accounting for bioinspired complexities in engineering cells and tissues for TERM applications.
Collapse
Affiliation(s)
- Xiaoming He
- Department of Biomedical Engineering, The Ohio State University, Columbus, Ohio 43210, USA.,Comprehensive Cancer Center, The Ohio State University, Columbus, Ohio 43210, USA.,Davis Heart and Lung Research Institute, The Ohio State University, Columbus, Ohio 43210, USA
| |
Collapse
|
13
|
|
14
|
Dumbleton J, Agarwal P, Huang H, Hogrebe N, Han R, Gooch KJ, He X. The effect of RGD peptide on 2D and miniaturized 3D culture of HEPM cells, MSCs, and ADSCs with alginate hydrogel. Cell Mol Bioeng 2016; 9:277-288. [PMID: 27990180 DOI: 10.1007/s12195-016-0428-9] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022] Open
Abstract
Advancements in tissue engineering require the development of new technologies to study cell behavior in vitro. This study focuses on stem cell behavior within various miniaturized three-dimensional (3D) culture conditions of alginate biomaterials modified with the Arg-Gly-Asp (RGD) peptide known for its role in cell adhesion/attachment. Human embryonic palatal mesenchyme (HEPM) cells, bone marrow derived mesenchymal stem cells (MSCs), and human adipose derived stem cells (ADSCs) were cultured on a flat hydrogel of different concentrations of alginate-RGD, and in the miniaturized 3D core of microcapsules with either a 2% alginate or 2% alginate-RGD shell. The core was made of 0%, 0.5%, or 2% alginate-RGD. Cell spreading was observed in all systems containing the RGD peptide, and the cell morphology was quantified by measuring the cell surface area and circularity. In all types of stem cells, there was a significant increase in the cell surface area (p < 0.05) and a significant decrease in cell circularity (p < 0.01) in alginate-RGD conditions, indicating that cells spread much more readily in environments containing the peptide. This control over the cell spreading within a 3D microenvironment can help to create the ideal biomimetic condition in which to conduct further studies on cell behavior.
Collapse
Affiliation(s)
- Jenna Dumbleton
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH 43210 (USA); Dorothy M. Davis Heart and Lung Research Institute, The Ohio State University, Columbus, OH 43210 (USA)
| | - Pranay Agarwal
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH 43210 (USA); Dorothy M. Davis Heart and Lung Research Institute, The Ohio State University, Columbus, OH 43210 (USA)
| | - Haishui Huang
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH 43210 (USA); Dorothy M. Davis Heart and Lung Research Institute, The Ohio State University, Columbus, OH 43210 (USA); Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, OH 43210 (USA)
| | - Nathaniel Hogrebe
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH 43210 (USA); Dorothy M. Davis Heart and Lung Research Institute, The Ohio State University, Columbus, OH 43210 (USA)
| | - Renzhi Han
- Dorothy M. Davis Heart and Lung Research Institute, The Ohio State University, Columbus, OH 43210 (USA); Department of Surgery, The Ohio State University, Columbus, OH 43210 (USA)
| | - Keith J Gooch
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH 43210 (USA); Dorothy M. Davis Heart and Lung Research Institute, The Ohio State University, Columbus, OH 43210 (USA)
| | - Xiaoming He
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH 43210 (USA); Dorothy M. Davis Heart and Lung Research Institute, The Ohio State University, Columbus, OH 43210 (USA); Comprehensive Cancer Center, The Ohio State University, Columbus, OH 43210 (USA)
| |
Collapse
|
15
|
Khanmohammadi M, Sakai S, Ashida T, Taya M. Production of hyaluronic-acid-based cell-enclosing microparticles and microcapsules via enzymatic reaction using a microfluidic system. J Appl Polym Sci 2015. [DOI: 10.1002/app.43107] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Affiliation(s)
- Mehdi Khanmohammadi
- Division of Chemical Engineering, Department of Materials Science and Engineering, Graduate School of Engineering Science; Osaka University; Toyonaka Osaka Japan
| | - Shinji Sakai
- Division of Chemical Engineering, Department of Materials Science and Engineering, Graduate School of Engineering Science; Osaka University; Toyonaka Osaka Japan
| | - Tomoaki Ashida
- Division of Chemical Engineering, Department of Materials Science and Engineering, Graduate School of Engineering Science; Osaka University; Toyonaka Osaka Japan
| | - Masahito Taya
- Division of Chemical Engineering, Department of Materials Science and Engineering, Graduate School of Engineering Science; Osaka University; Toyonaka Osaka Japan
| |
Collapse
|
16
|
Araki Y, Yao T, Asayama Y, Matsuhisa A, Araki Y. Single human sperm cryopreservation method using hollow-core agarose capsules. Fertil Steril 2015. [PMID: 26207962 DOI: 10.1016/j.fertnstert.2015.06.043] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
Abstract
OBJECTIVE To develop an efficient cryopreservation method using a single sperm. DESIGN Experimental study. SETTING Laboratory of a private institute. PATIENT(S) A fertile donor. INTERVENTION(S) We produced hollow-core capsules with agarose walls. A single human sperm was injected into each capsule as per the conventional intracytoplasmic sperm injection (ICSI) method. The capsules that contained the spermatozoa were cryopreserved on polycarbonate or nylon mesh sheets using nitrogen vapor. Before their use, the capsules were thawed and recovered. The motile spermatozoa in the capsules were counted. MAIN OUTCOME MEASURE(S) The recovery rates of the agarose capsules and the spermatozoa in these capsules after thawing and the mortality and survival rates of the spermatozoa. RESULT(S) The recovery rates of the capsules were 91.5% (75/82) using polycarbonate sheets (PS) and 98.3% (59/60) using mesh sheets (MS) after thawing. The recovered capsules were not at all damaged. The recovery rates of the spermatozoa were 91.5% (75/82) using PS and 96.7% (58/60) using MS. Sperm motility rates were 85.3% (64/75) and 82.8% (48/58), whereas the survival rates of the immotile spermatozoa by the hypoosmotic swelling test were 81.8% (9/11) and 50.0% (5/10); furthermore, the total survival rates of the spermatozoa were 97.3% (73/75) and 91.4% (53/58) using PS and MS, respectively. There was no significant difference between the results obtained using PS and MS. CONCLUSION(S) A cryopreservation method for a single sperm using an agarose capsule has been developed. The method is expected to be useful in ICSI treatment in patients with few spermatozoa.
Collapse
Affiliation(s)
- Yasuyuki Araki
- The Institute for Assisted Reproductive Medical Technology, Fujimi, Maebashi, Gunma, Japan.
| | - Tatsuma Yao
- Fuso Pharmaceutical Industries, Ltd., Research and Development Center, Joto, Osaka, Japan
| | - Yuta Asayama
- Fuso Pharmaceutical Industries, Ltd., Research and Development Center, Joto, Osaka, Japan
| | - Akio Matsuhisa
- Fuso Pharmaceutical Industries, Ltd., Research and Development Center, Joto, Osaka, Japan
| | - Yasuhisa Araki
- The Institute for Assisted Reproductive Medical Technology, Fujimi, Maebashi, Gunma, Japan
| |
Collapse
|
17
|
Zhao S, Agarwal P, Rao W, Huang H, Zhang R, Liu Z, Yu J, Weisleder N, Zhang W, He X. Coaxial electrospray of liquid core-hydrogel shell microcapsules for encapsulation and miniaturized 3D culture of pluripotent stem cells. Integr Biol (Camb) 2015; 6:874-84. [PMID: 25036382 DOI: 10.1039/c4ib00100a] [Citation(s) in RCA: 73] [Impact Index Per Article: 8.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Abstract
A novel coaxial electrospray technology is developed to generate microcapsules with a hydrogel shell of alginate and an aqueous liquid core of living cells using two aqueous fluids in one step. Approximately 50 murine embryonic stem (ES) cells encapsulated in the core with high viability (92.3 ± 2.9%) can proliferate to form a single ES cell aggregate of 128.9 ± 17.4 μm in each microcapsule within 7 days. Quantitative analyses of gene and protein expression indicate that ES cells cultured in the miniaturized 3D liquid core of the core-shell microcapsules have significantly higher pluripotency on average than the cells cultured on the 2D substrate or in the conventional 3D alginate hydrogel microbeads without a core-shell architecture. The higher pluripotency is further suggested by their significantly higher capability of differentiation into beating cardiomyocytes and higher expression of cardiomyocyte specific gene markers on average after directed differentiation under the same conditions. Considering its wide availability, easiness to set up and operate, reusability, and high production rate, the novel coaxial electrospray technology together with the microcapsule system is of importance for mass production of ES cells with high pluripotency to facilitate translation of the emerging pluripotent stem cell-based regenerative medicine into the clinic.
Collapse
Affiliation(s)
- Shuting Zhao
- Department of Biomedical Engineering, The Ohio State University, 1080 Carmack Road, Columbus, OH 43210, USA.
| | | | | | | | | | | | | | | | | | | |
Collapse
|
18
|
A novel bio-safe phase separation process for preparing open-pore biodegradable polycaprolactone microparticles. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2014; 42:102-10. [PMID: 25063098 DOI: 10.1016/j.msec.2014.05.037] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/12/2014] [Revised: 04/22/2014] [Accepted: 05/07/2014] [Indexed: 11/23/2022]
Abstract
Open-pore biodegradable microparticles are object of considerable interest for biomedical applications, particularly as cell and drug delivery carriers in tissue engineering and health care treatments. Furthermore, the engineering of microparticles with well definite size distribution and pore architecture by bio-safe fabrication routes is crucial to avoid the use of toxic compounds potentially harmful to cells and biological tissues. To achieve this important issue, in the present study a straightforward and bio-safe approach for fabricating porous biodegradable microparticles with controlled morphological and structural features down to the nanometer scale is developed. In particular, ethyl lactate is used as a non-toxic solvent for polycaprolactone particles fabrication via a thermal induced phase separation technique. The used approach allows achieving open-pore particles with mean particle size in the 150-250 μm range and a 3.5-7.9 m(2)/g specific surface area. Finally, the combination of thermal induced phase separation and porogen leaching techniques is employed for the first time to obtain multi-scaled porous microparticles with large external and internal pore sizes and potential improved characteristics for cell culture and tissue engineering. Samples were characterized to assess their thermal properties, morphology and crystalline structure features and textural properties.
Collapse
|
19
|
Wilson JL, Najia MA, Saeed R, McDevitt TC. Alginate encapsulation parameters influence the differentiation of microencapsulated embryonic stem cell aggregates. Biotechnol Bioeng 2014; 111:618-31. [PMID: 24166004 PMCID: PMC4163549 DOI: 10.1002/bit.25121] [Citation(s) in RCA: 57] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/06/2013] [Revised: 08/26/2013] [Accepted: 09/17/2013] [Indexed: 02/06/2023]
Abstract
Pluripotent embryonic stem cells (ESCs) have tremendous potential as tools for regenerative medicine and drug discovery, yet the lack of processes to manufacture viable and homogenous cell populations of sufficient numbers limits the clinical translation of current and future cell therapies. Microencapsulation of ESCs within microbeads can shield cells from hydrodynamic shear forces found in bioreactor environments while allowing for sufficient diffusion of nutrients and oxygen through the encapsulation material. Despite initial studies examining alginate microbeads as a platform for stem cell expansion and directed differentiation, the impact of alginate encapsulation parameters on stem cell phenotype has not been thoroughly investigated. Therefore, the objective of this study was to systematically examine the effects of varying alginate compositions on microencapsulated ESC expansion and phenotype. Pre-formed aggregates of murine ESCs were encapsulated in alginate microbeads composed of a high or low ratio of guluronic to mannuronic acid residues (High G and High M, respectively), with and without a poly-L-lysine (PLL) coating, thereby providing four distinct alginate bead compositions for analysis. Encapsulation in all alginate compositions was found to delay differentiation, with encapsulation within High G alginate yielding the least differentiated cell population. The addition of a PLL coating to the High G alginate prevented cell escape from beads for up to 14 days. Furthermore, encapsulation within High M alginate promoted differentiation toward a primitive endoderm phenotype. Taken together, the findings of this study suggest that distinct ESC expansion capacities and differentiation trajectories emerge depending on the alginate composition employed, indicating that encapsulation material physical properties can be used to control stem cell fate.
Collapse
Affiliation(s)
- Jenna L Wilson
- The Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology and Emory University, Atlanta, Georgia
| | | | | | | |
Collapse
|
20
|
Tian M, Wang J, Zhang E, Li J, Duan C, Yao F. Synthesis of agarose-graft-poly[3-dimethyl (methacryloyloxyethyl) ammonium propanesulfonate] zwitterionic graft copolymers via ATRP and their thermally-induced aggregation behavior in aqueous media. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:8076-8085. [PMID: 23713658 DOI: 10.1021/la4007668] [Citation(s) in RCA: 35] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
A novel polysaccharide-based zwitterionic copolymer, agarose-graft-poly[3-dimethyl (methacryloyloxyethyl) ammonium propanesulfonate] (agarose-g-PDMAPS) with UCST, depending both on hydrogen bonding and electrostatic interaction, was synthesized by ATRP, and its aggregation behavior in aqueous media was investigated in detail. Proton nuclear magnetic resonance spectroscopy, Fourier transform-infrared spectroscopy, and gel-permeation chromatography were performed to characterize the copolymer. Thermosensitive behaviors of the copolymers in water, NaCl, and urea solution were tracked by ultraviolet, dynamic light scattering, and transmission electron microscopy analysis. It was found that the copolymers existed as "core-shell" spheres at an elevated temperature, as a result of the self-assembly of the agarose backbones located in the "core" driven by hydrogen-bonding interactions. When the copolymer solution was cooled below UCST, the core-shell spheres began to aggregate because of the electrostatic interactions and collapse of PDMAPS side chains in the "shell" layer. UCST of the copolymer could be tuned in a wide range, depending on the chain lengths of PDMAPS. This is the first example to investigate the thermosensitivity, combining ionic interactions of the zwitterionic side chains with hydrogen bondings from the biocompatible agarose backbones. The synthetic strategy presented here can be employed in the preparation of other novel biomaterials from a variety of polysaccharides.
Collapse
Affiliation(s)
- Miao Tian
- School of Chemical Engineering and Technology, Key Laboratory of Systems Bioengineering of Ministry of Education, Tianjin University, Tianjin 300072, China
| | | | | | | | | | | |
Collapse
|
21
|
Huang X, Jeong YI, Moon BK, Zhang L, Kang DH, Kim I. Self-assembly of morphology-tunable architectures from tetraarylmethane derivatives for targeted drug delivery. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:3223-3233. [PMID: 23425332 DOI: 10.1021/la305069e] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
Tetraarylmethane compounds consisting of two pyrogallol and two aniline units, namely, Ar2CAr'2 {Ar = 3,4,5-C6H2(OH)3 and Ar' = 3,5-R2-4-C6H2NH2 [R = Me (1), iPr (2)]} exhibit excellent self-assembly behavior. Compound 1 yields size-tunable hollow nanospheres (HNSs) with a narrow size distribution, and 2 yields various morphologies ranging from microtubules to microrods via self-assembly induced by hydrogen bonding and π-π stacking interactions. On the basis of the experimental results, a plausible mechanism for morphology tunability was proposed. As a means of utilizing the self-assembled HNSs for targeting controlled drug delivery, folic acid (FA) and rhodamine 6G (Rh6G) were grafted onto compound 1 to yield the FA-Rh6G-1 complex. The HNSs fabricated with FA-Rh6G-1 showed low cytotoxicity against human embryonic kidney 293T cells and CT26 colon carcinoma cells and good doxorubicin (DOX) loading capacity (9.6 wt %). The FA receptor-mediated endocytosis of FA-Rh6G-1 HNSs examined by using a confocal laser scanning microscope and a flow cytometer revealed that the uptake of FA-Rh6G-1 HNSs into CT26 cells was induced by FA receptor-mediated endocytosis. In vitro drug delivery tests showed that the DOX molecules were released from the resulting HNSs in a sustainable and pH-dependent manner, demonstrating a potential application for HNSs in targeted drug delivery for cancer therapy.
Collapse
Affiliation(s)
- Xinhua Huang
- The WCU Center for Synthetic Polymer Bioconjugate Hybrid Materials, Department of Polymer Science and Engineering, Pusan National University, Pusan, Korea
| | | | | | | | | | | |
Collapse
|
22
|
Wilson JL, McDevitt TC. Stem cell microencapsulation for phenotypic control, bioprocessing, and transplantation. Biotechnol Bioeng 2013; 110:667-82. [PMID: 23239279 DOI: 10.1002/bit.24802] [Citation(s) in RCA: 95] [Impact Index Per Article: 8.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/28/2012] [Revised: 11/28/2012] [Accepted: 11/30/2012] [Indexed: 01/18/2023]
Abstract
Cell microencapsulation has been utilized for decades as a means to shield cells from the external environment while simultaneously permitting transport of oxygen, nutrients, and secretory molecules. In designing cell therapies, donor primary cells are often difficult to obtain and expand to appropriate numbers, rendering stem cells an attractive alternative due to their capacities for self-renewal, differentiation, and trophic factor secretion. Microencapsulation of stem cells offers several benefits, namely the creation of a defined microenvironment which can be designed to modulate stem cell phenotype, protection from hydrodynamic forces and prevention of agglomeration during expansion in suspension bioreactors, and a means to transplant cells behind a semi-permeable barrier, allowing for molecular secretion while avoiding immune reaction. This review will provide an overview of relevant microencapsulation processes and characterization in the context of maintaining stem cell potency, directing differentiation, investigating scalable production methods, and transplanting stem cells for clinically relevant disorders.
Collapse
Affiliation(s)
- Jenna L Wilson
- Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology and Emory University, Atlanta, Georgia 30332-0535, USA
| | | |
Collapse
|
23
|
Sakai S, Liu Y, Mah EJ, Taya M. Horseradish peroxidase/catalase-mediated cell-laden alginate-based hydrogel tube production in two-phase coaxial flow of aqueous solutions for filament-like tissues fabrication. Biofabrication 2013; 5:015012. [DOI: 10.1088/1758-5082/5/1/015012] [Citation(s) in RCA: 41] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
24
|
Zhang L, Jeong YI, Zheng S, Suh H, Kang DH, Kim I. Fabrication of microspheres via solvent volatization induced aggregation of self-assembled nanomicellar structures and their use as a pH-dependent drug release system. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:65-74. [PMID: 23215353 DOI: 10.1021/la303634y] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
A series of oleamide derivatives, (C(18)H(34)NO)(2)(CH(2))(n) [n = 2 (1a), 3 (1b), 4 (1c), or 6 (1d); C(18)H(34)NO = oleic amide fragment] and (C(18)H(34)NO)(CH(2))(6)NH(2) (2), have been synthesized and their self-assembly is investigated in ethanol/water media. Self-assembly of 1a and 1b in ethanol/water (1/0.1 v/v) solution (5 mg mL(-1)) yields microspheres (MSs) with the average diameter ∼10 μm via a gradual temperature reduction and solvent volatilization process. Under the same self-assembly conditions, microrods (average diameter ∼6 μm and several tens of micrometers in length), micronecklace-like, and shape-irregular microparticles are formed from the self-assembly of 1c, 1d, and 2, respectively. The kinetics of evolution for their self-assemblies by dynamic light scattering technique and in situ observation by optical microscopy reveals that the microstructures formation is from a well-behaved aggregation of nanoscale micelles induced by solvent volatilization. The FT-IR and temperature-dependent (1)H-NMR spectra demonstrate the hydrogen bonding force and π-π stacking, which drove the self-assembly of all oleamide derivatives in ethanol/water. Among the fabricated microstructures, the MSs from 1a exhibit the best dispersity, which thus have been used as a scaffold for the in vitro release of doxorubicin. The results demonstrate a pH-sensitive release process, enhanced release specifically at low pH 5.2.
Collapse
Affiliation(s)
- Lidong Zhang
- The WCU Center for Synthetic Polymer Bioconjugate Hybrid Materials, Department of Polymer Science and Engineering, Pusan National University, Pusan 609 735, Korea
| | | | | | | | | | | |
Collapse
|
25
|
Acarregui A, Murua A, Pedraz JL, Orive G, Hernández RM. A Perspective on Bioactive Cell Microencapsulation. BioDrugs 2012; 26:283-301. [DOI: 10.1007/bf03261887] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
26
|
Westman JO, Ylitervo P, Franzén CJ, Taherzadeh MJ. Effects of encapsulation of microorganisms on product formation during microbial fermentations. Appl Microbiol Biotechnol 2012; 96:1441-54. [DOI: 10.1007/s00253-012-4517-y] [Citation(s) in RCA: 32] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/14/2012] [Revised: 10/11/2012] [Accepted: 10/14/2012] [Indexed: 12/21/2022]
|
27
|
Sakai S, Inagaki H, Inamoto K, Taya M. Wrapping tissues with a pre-established cage-like layer composed of living cells. Biomaterials 2012; 33:6721-7. [DOI: 10.1016/j.biomaterials.2012.06.027] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/02/2012] [Accepted: 06/16/2012] [Indexed: 02/05/2023]
|
28
|
Sakai S, Inagaki H, Liu Y, Matsuyama T, Kihara T, Miyake J, Kawakami K, Taya M. Rapidly serum-degradable hydrogel templating fabrication of spherical tissues and curved tubular structures. Biotechnol Bioeng 2012; 109:2911-9. [DOI: 10.1002/bit.24550] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/23/2012] [Revised: 04/23/2012] [Accepted: 04/25/2012] [Indexed: 11/09/2022]
|
29
|
Rokstad AM, Gustafsson BI, Espevik T, Bakke I, Pfragner R, Svejda B, Modlin IM, Kidd M. Microencapsulation of small intestinal neuroendocrine neoplasm cells for tumor model studies. Cancer Sci 2012; 103:1230-7. [PMID: 22435758 DOI: 10.1111/j.1349-7006.2012.02282.x] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2012] [Revised: 03/07/2012] [Accepted: 03/09/2012] [Indexed: 01/26/2023] Open
Abstract
Basic cancer research is dependent on reliable in vitro and in vivo tumor models. The serotonin (5-HT) producing small intestinal neuroendocrine tumor cell line KRJ-1 has been used in in vitro proliferation and secretion studies, but its use in in vivo models has been hampered by problems related to the xeno-barrier and tumor formation. This may be overcome by the encapsulation of tumor cells into alginate microspheres, which can function as bioreactors and protect against the host immune system. We used alginate encapsulation of KRJ-1 cells to achieve long-term functionality, growth and survival. Different conditions, including capsule size, variations in M/G content, gelling ions (Ca(2+) /Ba(2+)) and microcapsule core properties, and variations in KRJ-1 cell condition (single cells/spheroids) were tested. Viability and cell growth was evaluated with MTT, and confocal laser scanner microscopy combined with LIVE/DEAD viability stains. 5-HT secretion was measured to determine functionality. Under all conditions, single cell encapsulation proved unfavorable due to gradual cell death, while encapsulation of aggregates/spheroids resulted in surviving, functional bioreactors. The most ideal spheroids for encapsulation were 200-350 μm. Long-term survival (>30 days) was seen with solid Ca(2+) /Ba(2+) microbeads and hollow microcapsules. Basal 5-HT secretion was increased (sixfold) after hollow microcapsule encapsulation, while Ca(2+) /Ba(2+) microbeads was associated with normal basal secretion and responsiveness to cAMP/PKA activation. In conclusion, encapsulation of KRJ-1 cells into hollow microcapsules produces a bioreactor with a high constitutively activate basal 5-HT secretion, while Ca(2+) /Ba(2+) microbeads provide a more stable bioreactor similar to non-encapsulated cells. Alginate microspheres technology can thus be used to tailor different functional bioreactors for both in vitro and in vivo studies.
Collapse
Affiliation(s)
- Anne M Rokstad
- Department of Cancer Research and Molecular Medicine, Norwegian University of Science and Technology, Trondheim, Norway.
| | | | | | | | | | | | | | | |
Collapse
|
30
|
Sakai S, Liu Y, Matsuyama T, Kawakami K, Taya M. On-demand serum-degradable amylopectin-based in situ gellable hydrogel. ACTA ACUST UNITED AC 2012. [DOI: 10.1039/c1jm14460j] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
31
|
Zhang W, He X. Microencapsulating and Banking Living Cells for Cell-Based Medicine. JOURNAL OF HEALTHCARE ENGINEERING 2011; 2:427-446. [PMID: 22180835 DOI: 10.1260/2040-2295.2.4.427] [Citation(s) in RCA: 35] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
A major challenge to the eventual success of the emerging cell-based medicine such as tissue engineering, regenerative medicine, and cell transplantation is the limited availability of the desired cell sources. This challenge can be addressed by cell microencapsulation to overcome the undesired immune response (i.e., to achieve immunoisolation) so that non-autologous cells can be used to treat human diseases, and by cell/tissue preservation to bank living cells for wide distribution to end users so that they are readily available when needed in the future. This review summarizes the status quo of research in both cell microencapsulation and banking the microencapsulated cells. It is concluded with a brief outlook of future research directions in this important field.
Collapse
Affiliation(s)
- Wujie Zhang
- Department of Biomedical Engineering, The Ohio State University, Columbus, OH 43210
| | | |
Collapse
|
32
|
Sakai S, Ito S, Inagaki H, Hirose K, Matsuyama T, Taya M, Kawakami K. Cell-enclosing gelatin-based microcapsule production for tissue engineering using a microfluidic flow-focusing system. BIOMICROFLUIDICS 2011; 5:13402. [PMID: 21522492 PMCID: PMC3082339 DOI: 10.1063/1.3516657] [Citation(s) in RCA: 41] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/10/2010] [Accepted: 10/22/2010] [Indexed: 05/21/2023]
Abstract
Gelatin-based microcapsule production using a microfluidic system and the feasibility of the resultant microcapsules for constructing spherical tissues surrounded by heterogeneous cells were studied. The first cell-encapsulation and subsequent cell-enclosing microparticle encapsulation were achieved using a microfluidic flow-focusing droplet production system. A hollow-core structure of about 150 μm in diameter was developed by incubating the resultant microparticles at 37 °C, which induced thermal melting of the enclosed unmodified gelatin microparticles. Mammalian cells filled the hollow-cores after 4 days of incubation. A cell layer on the cell-enclosing microcapsules was developed by simply suspending the microcapsules in medium containing adherent fibroblast cells. This method may prove useful for the generation of gelatin microcapsules using a microfluidic system for formation of artificial tissue constructs.
Collapse
|
33
|
Balmayor ER, Azevedo HS, Reis RL. Controlled delivery systems: from pharmaceuticals to cells and genes. Pharm Res 2011; 28:1241-58. [PMID: 21424163 DOI: 10.1007/s11095-011-0392-y] [Citation(s) in RCA: 45] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2010] [Accepted: 02/03/2011] [Indexed: 11/26/2022]
Abstract
During the last few decades, a fair amount of scientific investigation has focused on developing novel and efficient drug delivery systems. According to different clinical needs, specific biopharmaceutical carriers have been proposed. Micro- and nanoparticulated systems, membranes and films, gels and even microelectronic chips have been successfully applied in order to deliver biopharmaceuticals via different anatomical routes. The ultimate goal is to deliver the potential drugs to target tissues, where regeneration or therapies (chemotherapy, antibiotics, and analgesics) are needed. Thereby, the bioactive molecule should be protected against environmental degradation. Delivery should be achieved in a dose- and time-correct manner. Drug delivery systems (DDS) have been conceived to provide improvements in drug administration such as ability to enhance the stability, absorption and therapeutic concentration of the molecules in combination with a long-term and controlled release of the drug. Moreover, the adverse effects related with some drugs can be reduced, and patient compliance could be improved. Recent advances in biotechnology, pharmaceutical sciences, molecular biology, polymer chemistry and nanotechnology are now opening up exciting possibilities in the field of DDS. However, it is also recognized that there are several key obstacles to overcome in bringing such approaches into routine clinical use. This review describes the present state-of-the-art DDS, with examples of current clinical applications, and the promises and challenges for the future in this innovative field.
Collapse
Affiliation(s)
- Elizabeth Rosado Balmayor
- 3B's Research Group-Biomaterials, Biodegradables and Biomimetics Headquarters of the European Institute of Excellence on Tissue Engineering & Regenerative Medicine, University of Minho, AvePark, 4806-909 Taipas, Guimarães, Portugal.
| | | | | |
Collapse
|
34
|
Sustained embryoid body formation and culture in a non-laborious three dimensional culture system for human embryonic stem cells. Cytotechnology 2011; 63:227-37. [PMID: 21409453 DOI: 10.1007/s10616-011-9344-y] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/27/2010] [Accepted: 02/10/2011] [Indexed: 10/18/2022] Open
Abstract
Pluripotent human embryonic stem cell (hESC) lines are a promising model system in developmental and tissue regeneration research. Differentiation of hESCs towards the three germ layers and finally tissue specific cell types is often performed through the formation of embryoid bodies (EBs) in suspension or hanging droplet culture systems. However, these systems are inefficient regarding embryoid body (EB) formation, structural support to the EB and long term differentiation capacity. The present study investigates if agarose, as a semi solid matrix, can facilitate EB formation and support differentiation of hESC lines. The results showed that agarose culture is able to enhance EB formation efficiency with 10% and increase EB growth by 300%. The agarose culture system was able to maintain expression of the three germ layers over 8 weeks of culture. All of the four hESC lines tested developed EBs in the agarose system although with a histological heterogeneity between cell lines as well as within cell lines. In conclusion, a 3-D agarose culture of spherical hESC colonies improves EB formation and growth in a cost effective, stable and non-laborious technique.
Collapse
|
35
|
Brun-Graeppi AKAS, Richard C, Bessodes M, Scherman D, Merten OW. Cell microcarriers and microcapsules of stimuli-responsive polymers. J Control Release 2011; 149:209-24. [DOI: 10.1016/j.jconrel.2010.09.023] [Citation(s) in RCA: 78] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/09/2010] [Accepted: 09/21/2010] [Indexed: 12/22/2022]
|
36
|
Yasukawa M, Kamio E, Ono T. Monodisperse water-in-water-in-oil emulsion droplets. Chemphyschem 2011; 12:263-6. [PMID: 21275015 DOI: 10.1002/cphc.201000905] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2010] [Indexed: 11/06/2022]
Affiliation(s)
- Masahiro Yasukawa
- Department of Material and Energy Science, Graduate School of Environmental Science, Okayama University, 3-1-1 Tsushima-Naka, Kita-ku, Okayama 700-8530, Japan
| | | | | |
Collapse
|
37
|
Liu W, Huang X, Wei H, Chen K, Gao J, Tang X. Facile preparation of hollow crosslinked polyphosphazene submicrospheres with mesoporous shells. ACTA ACUST UNITED AC 2011. [DOI: 10.1039/c1jm11802a] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|
38
|
Selimoglu SM, Elibol M. Alginate as an immobilization material for MAb production via encapsulated hybridoma cells. Crit Rev Biotechnol 2010; 30:145-59. [PMID: 20210690 DOI: 10.3109/07388550903451652] [Citation(s) in RCA: 25] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
Abstract
Alginate has been widely used in various applications since its first extraction. What makes this biopolymer useful is its high biocompatibility and humid gelation conditions. Both of these features bring it into prominence as an ideal immobilization material. However, there are some complicated aspects of cell immobilization using alginate biopolymers. This review discusses and clarifies these crucial points, using as an example the bioprocessing of highly fragile cells (hybridoma cells). The review focuses on the cultivation and production of alginate encapsulated cells.
Collapse
Affiliation(s)
- S Mert Selimoglu
- Department of Bioengineering, Ege University, Bornova, Izmir, Turkey
| | | |
Collapse
|
39
|
Jing D, Parikh A, Tzanakakis ES. Cardiac cell generation from encapsulated embryonic stem cells in static and scalable culture systems. Cell Transplant 2010; 19:1397-412. [PMID: 20587137 DOI: 10.3727/096368910x513955] [Citation(s) in RCA: 85] [Impact Index Per Article: 6.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022] Open
Abstract
Heart diseases are major causes of morbidity and mortality linked to extensive loss of cardiac cells. Embryonic stem cells (ESCs) give rise to cardiomyocyte-like cells, which may be used in heart cell replacement therapies. Most cardiogenic differentiation protocols involve the culture of ESCs as embryoid bodies (EBs). Stirred-suspension bioreactor cultures of ESC aggregates may be employed for scaling up the production of cardiomyocyte progeny but the wide range of EB sizes and the unknown effects of the hydrodynamic environment on differentiating EBs are some of the major challenges in tightly controlling the differentiation outcome. Here, we explored the cardiogenic potential of mouse ESCs (mESCs) and human ESCs (hESCs) encapsulated in poly-L-lysine (pLL)-coated alginate capsules. Liquefaction of the capsule core led to the formation of single ESC aggregates within each bead and their average size depended on the concentration of seeded ESCs. Encapsulated mESCs were directed along cardiomyogenic lineages in dishes under serum-free conditions with the addition of bone morphogenetic protein 4 (BMP4). Human ESCs in pLL-layered liquid core (LC) alginate beads were also differentiated towards heart cells in serum-containing media. Besides the robust cell proliferation, higher fractions of cells expressing cardiac markers were detected in ESCs encapsulated in LC than in solid beads. Furthermore, we demonstrated for the first time that ESCs encapsulated in pLL-layered LC alginate beads can be coaxed towards heart cells in stirred-suspension bioreactors. Encapsulated ESCs yielded higher fractions of Nkx2.5- and GATA4-positive cells in the bioreactor compared to dish cultures. Differentiated cells formed beating foci that responded to chronotropic agents in an organotypic manner. Our findings warrant further development and implementation of microencapsulation technologies in conjunction with bioreactor cultivation to enable the production of stem cell-derived cardiac cells appropriate for clinical therapies and applications.
Collapse
Affiliation(s)
- Donghui Jing
- Department of Chemical and Biological Engineering, State University of New York at Buffalo, Buffalo, NY 14260, USA
| | | | | |
Collapse
|
40
|
Wang C, Varshney RR, Wang DA. Therapeutic cell delivery and fate control in hydrogels and hydrogel hybrids. Adv Drug Deliv Rev 2010; 62:699-710. [PMID: 20138940 DOI: 10.1016/j.addr.2010.02.001] [Citation(s) in RCA: 145] [Impact Index Per Article: 10.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/20/2009] [Revised: 01/29/2010] [Accepted: 02/01/2010] [Indexed: 11/18/2022]
Abstract
Hydrogels are synthetic or natural polymer networks that closely mimic native extracellular matrices. As hydrogel-based vehicles are being increasingly employed in therapeutic cell delivery, two inherent traits of most common hydrogels, namely low cell affinity and high cell constraint, have significantly drawn the attention of biomedical community. These two properties lead to the unfavourable settlement of anchorage-dependent cells (ADCs) and unsatisfactory cell delivery or tissue formation in hydrogel matrices. Tissue engineers have correspondingly made many efforts involving chemical modification or physical hybridisation to facilitate ADC settlement and promote tissue formation. On the other hand, these two 'bio-inert' characteristics have particularly favoured oncological cell therapists, who expect to utilize hydrogels to provide sufficiently high confinement of the delivered cells for anti-cancer purposes. In general, control of cell fate and behaviours in these three-dimensional (3D) microenvironments has become the central aim for hydrogel-mediated cell delivery, towards which various models based on hydrogels and their hybrids have emerged. In this paper, we will first review the development of strategies aiming to overcome the aforementioned two 'shortcomings' by (i) establishing ADC survival and (ii) creating space for tissue formation respectively, and then introduce how people take advantage of these 'disadvantages' of hydrogel encapsulation for (iii) an enhanced confinement of cell motion.
Collapse
Affiliation(s)
- Chunming Wang
- Nanyang Technological University, Singapore, Republic of Singapore
| | | | | |
Collapse
|
41
|
Ni D, Wang L, Sun Y, Guan Z, Yang S, Zhou K. Amphiphilic Hollow Carbonaceous Microspheres with Permeable Shells. Angew Chem Int Ed Engl 2010; 49:4223-7. [DOI: 10.1002/anie.201000697] [Citation(s) in RCA: 83] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
|
42
|
Ni D, Wang L, Sun Y, Guan Z, Yang S, Zhou K. Amphiphilic Hollow Carbonaceous Microspheres with Permeable Shells. Angew Chem Int Ed Engl 2010. [DOI: 10.1002/ange.201000697] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
43
|
Sakai S, Matsuyama T, Hirose K, Kawakami K. In Situ Simultaneous Protein−Polysaccharide Bioconjugation and Hydrogelation Using Horseradish Peroxidase. Biomacromolecules 2010; 11:1370-5. [DOI: 10.1021/bm1001608] [Citation(s) in RCA: 38] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
Affiliation(s)
- Shinji Sakai
- Division of Chemical Engineering, Department of Materials Engineering, Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama-cho, Toyonaka, Osaka, 560-8531, Japan, and Department of Chemical Engineering, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
| | - Tomohiro Matsuyama
- Division of Chemical Engineering, Department of Materials Engineering, Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama-cho, Toyonaka, Osaka, 560-8531, Japan, and Department of Chemical Engineering, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
| | - Keisuke Hirose
- Division of Chemical Engineering, Department of Materials Engineering, Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama-cho, Toyonaka, Osaka, 560-8531, Japan, and Department of Chemical Engineering, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
| | - Koei Kawakami
- Division of Chemical Engineering, Department of Materials Engineering, Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama-cho, Toyonaka, Osaka, 560-8531, Japan, and Department of Chemical Engineering, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
| |
Collapse
|
44
|
Rabanel JM, Banquy X, Zouaoui H, Mokhtar M, Hildgen P. Progress technology in microencapsulation methods for cell therapy. Biotechnol Prog 2009; 25:946-63. [PMID: 19551901 DOI: 10.1002/btpr.226] [Citation(s) in RCA: 102] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
Cell encapsulation in microcapsules allows the in situ delivery of secreted proteins to treat different pathological conditions. Spherical microcapsules offer optimal surface-to-volume ratio for protein and nutrient diffusion, and thus, cell viability. This technology permits cell survival along with protein secretion activity upon appropriate host stimuli without the deleterious effects of immunosuppressant drugs. Microcapsules can be classified in 3 categories: matrix-core/shell microcapsules, liquid-core/shell microcapsules, and cells-core/shell microcapsules (or conformal coating). Many preparation techniques using natural or synthetic polymers as well as inorganic compounds have been reported. Matrix-core/shell microcapsules in which cells are hydrogel-embedded, exemplified by alginates capsule, is by far the most studied method. Numerous refinement of the technique have been proposed over the years such as better material characterization and purification, improvements in microbead generation methods, and new microbeads coating techniques. Other approaches, based on liquid-core capsules showed improved protein production and increased cell survival. But aside those more traditional techniques, new techniques are emerging in response to shortcomings of existing methods. More recently, direct cell aggregate coating have been proposed to minimize membrane thickness and implants size. Microcapsule performances are largely dictated by the physicochemical properties of the materials and the preparation techniques employed. Despite numerous promising pre-clinical results, at the present time each methods proposed need further improvements before reaching the clinical phase.
Collapse
|
45
|
Sakai S, Ito S, Ogushi Y, Hashimoto I, Hosoda N, Sawae Y, Kawakami K. Enzymatically fabricated and degradable microcapsules for production of multicellular spheroids with well-defined diameters of less than 150μm. Biomaterials 2009; 30:5937-42. [DOI: 10.1016/j.biomaterials.2009.07.031] [Citation(s) in RCA: 57] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2009] [Accepted: 07/17/2009] [Indexed: 01/08/2023]
|
46
|
Paul A, Ge Y, Prakash S, Shum-Tim D. Microencapsulated stem cells for tissue repairing: implications in cell-based myocardial therapy. Regen Med 2009; 4:733-45. [DOI: 10.2217/rme.09.43] [Citation(s) in RCA: 48] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022] Open
Abstract
Stem cells have the unique properties of self-renewal, pluripotency and a high proliferative capability, which contributes to a large biomass potential. Hence, these cells act as a useful source for acquiring renewable adult cell lines. This, in turn, acts as a potent therapeutic tool to treat various diseases related to the heart, liver and kidney, as well as neurodegenerative diseases such as Parkinson’s and Alzheimer’s disease. However, a major problem that must be overcome before it can be effectively implemented into the clinical setting is a suitable delivery system that can retain an optimal quantity of the cells at the targeted site for a maximal clinical benefit; a system that will give a mechanical as well as an immune protection to the foreign cells, while at the same time enhancing the yields of differentiated cells, maintaining cell microenvironments and sustaining the differentiated cell functions. To address this issue we opted for a novel delivery system, termed the ‘artificial cells’, which are semipermeable microcapsules with strong and thin multilayer membrane components with specific mass transport properties. Here, we briefly introduce the concept of artificial cells for encapsulation of stem cells and investigate the application of microencapsulation technology as an ideal tool for all stem transplantations and relate their role to the emerging field of cellular cardiomyoplasty.
Collapse
Affiliation(s)
- Arghya Paul
- Biomedical Technology & Cell Therapy Research Laboratory, Department of Biomedical Engineering & Artificial Cells & Organs Research Centre, Faculty of Medicine, McGill University, 3775 University Street, Montreal, Quebec, H3A 2B4, Canada
| | - Yin Ge
- Divisions of Cardiac Surgery & Surgical Research, The Montreal General Hospital, MUHC, 1650 Cedar Avenue, Suite C9–169, Montreal, Quebec, H3G 1A4, Canada
| | - Satya Prakash
- Biomedical Technology & Cell Therapy Research Laboratory, Department of Biomedical Engineering & Artificial Cells & Organs Research Centre, Faculty of Medicine, McGill University, 3775 University Street, Montreal, Quebec, H3A 2B4, Canada
| | - Dominique Shum-Tim
- Divisions of Cardiac Surgery & Surgical Research, The Montreal General Hospital, MUHC, 1650 Cedar Avenue, Suite C9–169, Montreal, Quebec, H3G 1A4, Canada
| |
Collapse
|
47
|
Sakai S, Hashimoto I, Tanaka S, Salmons B, Kawakami K. Small Agarose Microcapsules with Cell-Enclosing Hollow Core for Cell Therapy: Transplantation of Ifosfamide-Activating Cells to the Mice with Preestablished Subcutaneous Tumor. Cell Transplant 2009; 18:933-9. [DOI: 10.3727/096368909x471143] [Citation(s) in RCA: 14] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022] Open
Abstract
Cell transplantation after enclosing in microcapsules has been studied as an alternative approach for treatment of wide variety of diseases. In the present study, we examined the feasibility of using agarose microcapsules, having a cell-enclosing hollow core of 100–150 μm in diameter and agarose gel membrane of about 20 μm in thickness, as a device for the methodology. We enclosed cells that had been genetically engineered to express cytochrome P450 2B1, an enzyme that activates the anticancer prodrug ifosfamide. The enclosed cells were shown to express the enzymatic function in the microcapsules in that they suppressed the growth of tumor cells in medium containing ifosfamide. In addition, a more significant regression of preformed tumors was observed in the nude mice implanted with the cell-enclosing microcapsules compared with those implanted with empty capsules after administration of ifosfamide. Preformed tumors shrank by less than 40% in volume in 6 of the 10 recipients implanted with cell-enclosing microcapsules. In contrast, only 1 in 10 of the preformed tumors in the recipient implanted with empty microcapsules shrank by this amount. These results suggest that agarose microcapsules containing cytochrome P450 2B1 enzyme-expressing cells are feasible devices for improving the chemotherapy of tumors. Thus, agarose microcapsule having hollow cores are generally a good candidate as vehicles for cell-encapsulation approaches to cell therapy.
Collapse
Affiliation(s)
- Shinji Sakai
- Department of Chemical Engineering, Faculty of Engineering, Kyushu University, Fukuoka-city, Fukuoka, Japan
| | - Ichiro Hashimoto
- Department of Chemical Engineering, Faculty of Engineering, Kyushu University, Fukuoka-city, Fukuoka, Japan
| | - Shinji Tanaka
- Department of Hepato-Biliary-Pancreatic Surgery, Tokyo Medical and Dental University, Bunkyo-ku, Tokyo, Japan
| | - Brian Salmons
- Austrianova Singapore Pte Ltd, Centros, Biopolis, Singapore
| | - Koei Kawakami
- Department of Chemical Engineering, Faculty of Engineering, Kyushu University, Fukuoka-city, Fukuoka, Japan
| |
Collapse
|
48
|
Sakai S, Hashimoto I, Kawakami K. Agarose-gelatin conjugate membrane enhances proliferation of adherent cells enclosed in hollow-core microcapsules. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2009; 19:937-44. [PMID: 18544240 DOI: 10.1163/156856208784613587] [Citation(s) in RCA: 14] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
Controlling growth of cells enclosed in hollow-core microcapsules is an important issue for the practical use of the device in biomedical and biopharmaceutical fields. In this study, we developed hollow-core microcapsules with a cell-adhesive agarose-gelatin conjugate (Aga-Ge) gel membrane for enhancement of adherent cell growth. We enclosed adherent feline kidney cells in these microcapsules and compared their growth profile and behavior with cells in microcapsules with an unmodified agarose membrane. The cells grew approx. 2-fold faster in microcapsules with the Aga-Ge membrane than in those with the unmodified agarose membrane. Fluorescence observation of the cellular skeleton clearly revealed that the enclosed cells adhered and spread on the inner surface of the Aga-Ge membrane but not on the unmodified agarose membrane. The maximum cell densities estimated on the basis of the cellular mitochondrial activities were independent of the cellular adhesiveness of the membrane. The mitochondrial activities per vehicle were similar for the two types of microcapsules. These results demonstrate that construction of microcapsule membranes from cell-adhesive materials is effective for enhancing cellular growth in these devices.
Collapse
Affiliation(s)
- Shinji Sakai
- Department of Chemical Engineering, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka, Japan.
| | | | | |
Collapse
|
49
|
Kamio E, Yonemura S, Ono T, Yoshizawa H. Microcapsules with macroholes prepared by the competitive adsorption of surfactants on emulsion droplet surfaces. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2008; 24:13287-13298. [PMID: 18666759 DOI: 10.1021/la800758d] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
We demonstrate a simple, unique method for preparing microcapsules with holes in their shells. Cross-linked polymelamine microcapsules are prepared by the phase-separation method. The holey shell of each microcapsule is synthesized on the surface of an oil-in-water (O/W) emulsion droplet where a water-soluble polymeric surfactant and an oil-soluble surfactant are competitively adsorbed. The water-soluble polymeric surfactant provides a reaction site for shell formation. The oil-soluble surfactant molecules seem to self-assemble while the shells are being formed, so holes appear where they assemble. The critical degree of surface coverage of an emulsion droplet by the water-soluble polymeric surfactant needed to form the holey shells is determined to be 0.90 from theoretical calculations in which competitive adsorption is considered. Theoretical consideration suggests that the size and quantity of the holes in the microcapsule shells are controlled by the composition of the surfactants adsorbed on the surface of an emulsion droplet. This theoretical consideration is confirmed by experiments. The prepared microcapsule with controllable macroholes in its shell has the potential to be used for controlled release applications and can be used to fabricate a microcapsule that encapsulates hydrophilic compounds.
Collapse
Affiliation(s)
- Eiji Kamio
- Department of Environmental Chemistry and Materials, Okayama University, 3-1-1 Tsushima-naka, Okayama-shi, Okayama 700-8530, Japan
| | | | | | | |
Collapse
|
50
|
Murua A, Portero A, Orive G, Hernández RM, de Castro M, Pedraz JL. Cell microencapsulation technology: towards clinical application. J Control Release 2008; 132:76-83. [PMID: 18789985 DOI: 10.1016/j.jconrel.2008.08.010] [Citation(s) in RCA: 268] [Impact Index Per Article: 16.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2008] [Accepted: 08/06/2008] [Indexed: 12/12/2022]
Abstract
The pharmacokinetic properties of a drug can be significantly improved by the delivery process. Scientists have understood that developing suitable drug delivery systems that release the therapeutically active molecule at the level and dose it is needed and during the optimal time represents a major advance in the field. Cell microencapsulation is an alternative approach for the sustained delivery of therapeutic agents. This technology is based on the immobilization of different types of cells within a polymeric matrix surrounded by a semipermeable membrane for the long-term release of therapeutics. As a result, encapsulated cells are isolated from the host immune system while allowing exchange of nutrients and waste and release of the therapeutic agents. The versatility of this approach has stimulated its use in the treatment of numerous medical diseases including diabetes, cancer, central nervous system diseases and endocrinological disorders among others. The aim of this review article is to give an overview on the current state of the art of the use of cell encapsulation technology as a controlled drug delivery system. The most important advantages of this type of "living" drug release strategy are highlighted, but also its limitations pointed out, and the major challenges to be addressed in the forthcoming years are described.
Collapse
Affiliation(s)
- Ainhoa Murua
- Faculty of Pharmacy, Laboratory of Pharmacy and Pharmaceutical Technology, University of the Basque Country, Vitoria-Gasteiz, Spain
| | | | | | | | | | | |
Collapse
|