Fungal foraging behaviour and hyphal space exploration in micro-structured Soil Chips

How do fungi navigate through the complex microscopic maze-like structures found in the soil? Fungal behaviour, especially at the hyphal scale, is largely unknown and challenging to study in natural habitats such as the opaque soil matrix. We monitored hyphal growth behaviour and strategies of seven Basidiomycete litter decomposing species in a micro-fabricated "Soil Chip" system that simulates principal aspects of the soil pore space and its micro-spatial heterogeneity. The hyphae were faced with micrometre constrictions, sharp turns and protruding obstacles, and the species examined were found to have profoundly different responses in terms of foraging range and persistence, spatial exploration and ability to pass obstacles. Hyphal behaviour was not predictable solely based on ecological assumptions, and our results obtained a level of trait information at the hyphal scale that cannot be fully explained using classical concepts of space exploration and exploitation such as the phalanx/guerrilla strategies. Instead, we propose a multivariate trait analysis, acknowledging the complex trade-offs and microscale strategies that fungal mycelia exhibit. Our results provide novel insights about hyphal behaviour, as well as an additional understanding of fungal habitat colonisation, their foraging strategies and niche partitioning in the soil environment.

Build your own soil: exploring microfluidics to create microbial habitat structures

Soil is likely the most complex ecosystem on earth. Despite the global importance and extraordinary diversity of soils, they have been notoriously challenging to study. We show how pioneering microfluidic techniques provide new ways of studying soil microbial ecology by allowing simulation and manipulation of chemical conditions and physical structures at the microscale in soil model habitats.

A new look at bubbles during biofilm inoculation reveals pronounced effects on growth and patterning

Specially designed microfluidic bioflow cells were used to temporarily trap microbubbles during different inoculation stages of Pseudomonas sp. biofilms. Despite being eliminated many hours before biofilm appearance, templated growth could occur at former bubble positions. Bubble-templated growth was either continuous or in ring patterns, depending on the stage of inoculation when the bubbles were introduced. Templated biofilms were strongly enhanced in terms of their growth kinetics and structural homogeneity. High resolution confocal imaging showed two separate bubble-induced bacterial trapping modes, which were responsible for the altered biofilm development. It is concluded that static bubbles can be exploited for fundamental improvements to bioreactor performance, as well as open new avenues to study isolated bacteria and small colonies.

Hydrodynamic Effects on Biofilms at the Biointerface Using a Microfluidic Electrochemical Cell: Case Study of Pseudomonas sp

The anchoring biofilm layer is expected to exhibit a different response to environmental stresses than for portions in the bulk, due to the protection from other strata and the proximity to the attachment surface. The effect of hydrodynamic stress on surface-adhered biofilm layers was tested using a specially designed microfluidic bio flow cell with an embedded three-electrode detection system. In situ electrochemical impedance spectroscopy (EIS) measurements of biocapacitance and bioresistance of Pseudomonas sp. biofilms were conducted during the growth phase and under different shear flow conditions with verification by other surface sensitive techniques. Distinct, but reversible changes to the amount of biofilm and its structure at the attachment surface were observed during the application of elevated shear stress. In contrast, regular microscopy revealed permanent distortion to the biofilm bulk, in the form of streamers and ripples. Following the application of extreme shear stresses, complete removal of significant portions of biofilm outer layers occurred, but this did not change the measured quantity of biofilm at the electrode attachment surface. The structure of the remaining biofilm, however, appeared to be modified and susceptible to further changes following application of shear stress directly to the unprotected biofilm layers at the attachment surface.

Through thick and thin: a microfluidic approach for continuous measurements of biofilm viscosity and the effect of ionic strength

Continuous, non-intrusive measurements of time-varying viscosity of Pseudomonas sp. biofilms are made using a microfluidic method that combines video tracking with a semi-empirical viscous flow model. The approach uses measured velocity and height of tracked biofilm segments, which move under the constant laminar flow of a nutrient solution. Following a low viscosity growth stage, rapid thickening was observed. During this stage, viscosity increased by over an order of magnitude in less than ten hours. The technique was also demonstrated as a promising platform for parallel experiments by subjecting multiple biofilm-laden microchannels to nutrient solutions containing NaCl in the range of 0 to 34 mM. Preliminary data suggest a strong relationship between ionic strength and biofilm properties, such as average viscosity and rapid thickening onset time. The technique opens the way for a combinatorial approach to study the response of biofilm viscosity under well-controlled physical, chemical and biological growth conditions.

A microfluidic method and custom model for continuous, non-intrusive biofilm viscosity measurements under different nutrient conditions

Straight, low-aspect ratio micro flow cells are used to support biofilm attachment and preferential accumulation at the short side-wall, which progressively reduces the effective channel width. The biofilm shifts downstream at measurable velocities under the imposed force from the constant laminar co-flowing nutrient stream. The dynamic behaviour of the biofilm viscosity is modeled semi-analytically, based on experimental measurements of biofilm dimensions and velocity as inputs. The technique advances the study of biofilm mechanical properties by strongly limiting biases related to non-Newtonian biofilm properties (e.g., shear dependent viscosity) with excellent time resolution. To demonstrate the proof of principle, young Pseudomonas sp. biofilms were analyzed under different nutrient concentrations and constant micro-flow conditions. The striking results show that large initial differences in biofilm viscosities grown under different nutrient concentrations become nearly identical in less than one day, followed by a continuous thickening process. The technique verifies that in 50 h from inoculation to early maturation stages, biofilm viscosity could grow by over 2 orders of magnitude. The approach opens the way for detailed studies of mechanical properties under a wide variety of physiochemical conditions, such as ionic strength, temperature, and shear stress.

Influence of wave action on the partitioning and transport of unattached and floc-associated bacteria in fresh water

The dynamic interaction of bacteria within bed sediment and suspended sediment (i.e., floc) in a wave-dominated beach environment was assessed using a laboratory wave flume. The influence of shear stress (wave energy) on bacterial concentrations and on the partitioning and transport of unattached and floc-associated bacteria was investigated. The study showed that increasing wave energy (0.60 and 5.35 N/s) resulted in a 0.5 to 1.5 log increase in unattached cells of the test bacterium Pseudomonas sp. strain CTO7::gfp-2 in the water column. There was a positive correlation between the bacterial concentrations in water and the total suspended solids, with the latter increasing from values of near 0 to up to 200 mg/L over the same wave energy increase. The median equivalent spherical diameter of flocs in suspension also increased by an order of magnitude in all experimental trials. Under both low (0.60 N/s) and high (5.35 N/s) energy regime, bacteria were shown to preferentially associate with flocs upon cessation of wave activity. The results suggest that collecting water samples during periods of low wave action for the purpose of monitoring the microbiological quality of water may underestimate bacterial concentrations partly because of an inability to account for the effect of shear stress on the erosion and mobilization of bacteria from bed sediment to the water column. This highlights the need to develop a more comprehensive beach analysis strategy that not only addresses presently uncharacterized shores and sediments but also recognizes the importance of eroded flocs as a vector for the transport of bacteria in aquatic environments.

Live-streaming: Time-lapse video evidence of novel streamer formation mechanism and varying viscosity

Time-lapse videos of growing biofilms were analyzed using a background subtraction method, which removed camouflaging effects from the heterogeneous field of view to reveal evidence of streamer formation from optically dense biofilm segments. In addition, quantitative measurements of biofilm velocity and optical density, combined with mathematical modeling, demonstrated that streamer formation occurred from mature, high-viscosity biofilms. We propose a streamer formation mechanism by sudden partial detachment, as opposed to continuous elongation as observed in other microfluidic studies. Additionally, streamer formation occurred in straight microchannels, as opposed to serpentine or pseudo-porous channels, as previously reported.

Predicting chemical environments of bacteria from receptor signaling

Sensory systems have evolved to respond to input stimuli of certain statistical properties, and to reliably transmit this information through biochemical pathways. Hence, for an experimentally well-characterized sensory system, one ought to be able to extract valuable information about the statistics of the stimuli. Based on dose-response curves from in vivo fluorescence resonance energy transfer (FRET) experiments of the bacterial chemotaxis sensory system, we predict the chemical gradients chemotactic Escherichia coli cells typically encounter in their natural environment. To predict average gradients cells experience, we revaluate the phenomenological Weber's law and its generalizations to the Weber-Fechner law and fold-change detection. To obtain full distributions of gradients we use information theory and simulations, considering limitations of information transmission from both cell-external and internal noise. We identify broad distributions of exponential gradients, which lead to log-normal stimuli and maximal drift velocity. Our results thus provide a first step towards deciphering the chemical nature of complex, experimentally inaccessible cellular microenvironments, such as the human intestine.

Outside the laboratory, bacteria live in complex microenvironments characterized by competition for space and available nutrients. Although often inaccessible by experiments, understanding the spatio-temporal dynamics of bacterial microenvironments is biomedically important. For instance, the chemical environment that symbiotic Escherichia coli encounter in the human gut relates to health of the gastrointestinal tract, gut metabolism, immune response, and tissue homeostasis. Other complex microenvironments include soil and biofilms. Assuming that bacterial sensory systems have evolved to optimally sense typical gradients, we treat signaling data, the signaling pathway with its architecture and reaction rates, and computer simulations of swimming bacteria in different gradients as “prior knowledge” to “reverse engineer” E. coli's habitat. Our identified gradients are exponentially shaped with wide-ranging rate values. These microenvironments most likely stem from local fluctuating nutrient sources and degradation by competing species, in which bacteria have evolved to swim with optimal performance.

Pronounced effect of the nature of the inoculum on biofilm development in flow systems

Biofilm formation renders sessile microbial populations growing in continuous-flow systems less susceptible to variation in dilution rate than planktonic cells, where dilution rates exceeding an organism's maximum growth rate (micro(max)) results in planktonic cell washout. In biofilm-dominated systems, the biofilm's overall micro(max) may therefore be more relevant than the organism's micro(max), where the biofilm micro(max) is considered as a net process dependent on the adsorption rate, growth rate, and removal rate of cells within the biofilm. Together with lag (acclimation) time, the biofilm's overall micro(max) is important wherever biofilm growth is a dominant form, from clinical settings, where the aim is to prevent transition from lag to exponential growth, to industrial bioreactors, where the aim is to shorten the lag and rapidly reach maximum activity. The purpose of this study was to measure CO(2) production as an indicator of biofilm activity to determine the effect of nutrient type and concentration and of the origin of the inoculum on the length of the lag phase, biofilm micro(max), and steady-state metabolic activity of Pseudomonas aeruginosa PA01 (containing gfp), Pseudomonas fluorescens CT07 (containing gfp), and a mixed community. As expected, for different microorganisms the lengths of the lag phase in biofilm development and the biofilm micro(max) values differ, whereas different nutrient concentrations result in differences in the lengths of lag phase and steady-state values but not in biofilm micro(max) rates. The data further showed that inocula from different phenotypic origins give rise to lag time of different lengths and that this influence persists for a number of generations after inoculation.

Planktonic cell yield is linked to biofilm development

We report on the ability of surface-associated microbes to produce and release single planktonic cells to the bulk liquid as early as 6 h after attachment, with pure culture and mixed-species biofilms yielding up to approximately 1 x 10(6) cells/cm(2) of attachment area per hour to the effluent after 24 h. Planktonic cell production typically increased as the biofilm developed and levelled off after the biofilm reached steady-state dimensions. Microscopic observations of continuous-flow cultured biofilms revealed independent cell movement within the biofilm microenvironment compared with flow-dependent movement of mostly single cells in the bulk-liquid phase. These results indicate that the prevailing concept of detachment occurring only after the biofilm has matured is incomplete. Instead, we show that biofilms yield cells to the environment soon after initial surface contact; the extent of this yield is dependent on biofilm development, which in turn is influenced by environmental parameters such as bulk-liquid flow rates and nutrient availability. The observation that biofilms yield significant numbers of cells throughout development should lead to a greater understanding of pathogen dissemination, biofouling of products or facilities, and the role that biofilms play in microbial proliferation in the environment.

The porous surface model, a novel experimental system for online quantitative observation of microbial processes under unsaturated conditions

Water is arguably the most important constituent of microbial microhabitats due to its control of physical and physiological processes critical to microbial activity. In natural environments, bacteria often live on unsaturated surfaces, in thin (micrometric) liquid films. Nevertheless, no experimental systems are available that allow real-time observation of bacterial processes in liquid films of controlled thickness. We propose a novel, inexpensive, easily operated experimental platform, termed the porous surface model (PSM) that enables quantitative real-time microscopic observations of bacterial growth and activity under controlled unsaturated conditions. Bacteria are inoculated on a porous ceramic plate, wetted by a liquid medium. The thickness of the liquid film at the surface of the plate is set by imposing suction, corresponding to soil matric potential, to the liquid medium. The utility of the PSM was demonstrated using Pseudomonas putida KT2440 tagged with gfp as a model bacterium. Single cells were inoculated at the surface of the PSM, and the rate at which colonies expanded laterally was measured for three matric potentials (-0.5, -1.2, and -3.6 kPa). The matric potential exerted significant influence on colony expansion rates, with a faster rate of spreading at -0.5 than at -1.2 or -3.6 kPa (diameter increase rate, ca. 1,000, 200, and 17 microm h(-1), respectively). These differences can be attributed to cell motility, strongly limited under the most negative matric potential. The PSM constitutes a tool uniquely adapted to study the influence of liquid film geometry on microbial processes. It should therefore contribute to uncovering mechanisms of microbial adaptation to unsaturated environments.