Kinetic limitations of a bioelectrochemical electrode using carbon nanotube-attached glucose oxidase for biofuel cells

Construction of a bioelectrocatalytic system with bacterial surface displayed enzyme-nanomaterial hybrids

To take advantage of the high specificity of enzymatic catalysis along with the high efficiency of electrochemical cofactor regeneration, a bacterial surface displayed enzyme-nanomaterial hybrid bioelectrocatalytic system is herein developed. A cofactor-dependent xylose reductase, capable of reducing xylose to xylitol, is displayed on the surface of Bacillus subtilis, followed by the attachment of copper nanomaterials via the binding of His-tagged enzyme with the nickel ion. This hybrid system can regenerate NADPH with a highest efficiency of 71.6% in 4 h without the usage of extra electron mediators, and 2.35 mM of xylitol can be synthesized after a series of optimization processes. This work opens up new possibilities for the construction and application of bioelectrocatalytic systems with enzyme-nanomaterial hybrids.

Anthraquinone-Mediated Fuel Cell Anode with an Off-Electrode Heterogeneous Catalyst Accessing High Power Density when Paired with a Mediated Cathode

The development of processes for electrochemical energy conversion and chemical production could benefit from new strategies to interface chemical redox reactions with electrodes. Here, we employ a diffusible low-potential organic redox mediator, 9,10-anthraquinone-2,7-disulfonic acid (AQDS), to promote efficient electrochemical oxidation of H₂ at an off-electrode heterogeneous catalyst. This unique approach to integrate chemical and electrochemical redox processes accesses power densities up to 228 mW/cm² (528 mW/cm² with iR-correction). These values are significantly higher than those observed in previous mediated electrochemical H₂ oxidation methods, including those using enzymes or inorganic mediators. The approach described herein shows how traditional catalytic chemistry can be coupled to electrochemical devices.

Mediated Fuel Cells: Soluble Redox Mediators and Their Applications to Electrochemical Reduction of O2 and Oxidation of H2, Alcohols, Biomass, and Complex Fuels

Mediated fuel cells are electrochemical devices that produce power in a manner similar to that of conventional proton exchange membrane fuel cells (PEMFCs). They differ from PEMFCs in their use of redox mediators dissolved in liquid electrolyte to conduct oxidation of the fuel or reduction of the oxidant, typically O2, in bulk solution. The mediators transport electrons (and often protons) between the electrode and the catalysts or chemical reagents in solution. This strategy can help overcome many of the challenges associated with conventional fuel cells, including managing complex multiphase reactions (as in O2 reduction) or the use of challenging or heterogeneous fuels, such as hydrocarbons, polyols, and biomass. Mediators are also commonly used in enzymatic fuel cells, where direct electron transfer from the electrode to the enzymatic active site can be slow. This review provides a comprehensive survey of historical and recent mediated fuel cell efforts, including applications using chemical and enzymatic catalysts.

Nanofibrillated Cellulose-Enzyme Assemblies for Enhanced Biotransformations with In Situ Cofactor Regeneration

We report herein the use of nanofibrillated cellulose (NFC) for development of enzyme assemblies in an oriented manner for biotransformation with in situ cofactor regeneration. This is achieved by developing fusion protein enzymes with cellulose-specific binding domains. Specifically, lactate dehydrogenase and NADH oxidase were fused with a cellulose binding domain, which enabled both enzyme recovery and assembling in essentially one single step by using NFC. Results showed that the binding capacity of the enzymes was as high as 0.9 μmol-enzyme/g-NFC. Compared to native parent free enzymes, NFC-enzyme assemblies improved the catalytic efficiency of the coupled reaction system by over 100%. The lifetime of enzymes was also improved by as high as 27 folds. The work demonstrates promising potential of using biocompatible and environmentally benign bio-based nanomaterials for construction of efficient catalysts for intensified bioprocessing and biotransformation applications.

Improved Performance of Glucose Bioanodes Using Composites of (7,6) Single-Walled Carbon Nanotubes and a Ferrocene-LPEI Redox Polymer

The effect of incorporating different types of carbon nanotubes into composite films of a redox polymer (FcMe₂-C₃-LPEI) and glucose oxidase (GOX) was investigated. The composite films were constructed by first forming a high-surface area network film of either single-walled carbon nanotubes (SWNTs) or multiwalled carbon nanotubes (MWNTs) on a glassy carbon electrode (GCE) by solution casting of a suspension of Triton-X-100 dispersed SWNTs. Next a glucose responsive redox hydrogel was formed on top of the nanotube-modified electrode by cross-linking FcMe₂-C₃-LPEI with glucose oxidase via ethylene glycol diglycidyl ether (EGDGE). Electrochemical and enzymatic measurements showed that composite films made with (7,6) SWNTs produced a higher response (3.3 mA/cm²) to glucose than films made with (6,5) SWNTs (1.8 mA/cm²) or MWNTs (1.2 mA/cm²) or films made without SWNTs (0.7 mA/cm²). We also show that the response of the composite films could be systematically varied by fabricating SWNT films with different weight ratios of (7,6) and (6,5) SWNTs. Optimization of the (7,6) SWNTs loading and the redox polymer-enzyme film produced a glucose response of 11.2 mA/cm². Combining the optimized glucose films with a platinum oxygen breathing cathode into a biofuel cell produced a maximum power density output of 343 μW/cm².

Immobilization of Phenylalanine Ammonia-Lyase on Single-Walled Carbon Nanotubes for Stereoselective Biotransformations in Batch and Continuous-Flow Modes

Carboxylated single-walled carbon nanotubes (SwCNTCOOH) were used as a support for the covalent immobilization of phenylalanine ammonia-lyase (PAL) from parsley by two different methods. The nanostructured biocatalysts (SwCNTCOOH-PALI and SwCNTCOOH-PALII) with low diffusional limitation were tested in the batch-mode kinetic resolution of racemic 2-amino-3-(thiophen-2-yl)propanoic acid (1) to yield a mixture of (R)-1 and (E)-3-(thiophen-2-yl)acrylic acid (2) and in ammonia addition to 2 to yield enantiopure (S)-1. SwCNTCOOH-PALII was a stable biocatalyst (>90 % of the original activity remained after six cycles with 1 and after three cycles in 6 m NH3 with 2). The study of ammonia addition to 2 in a continuous-flow microreactor filled with SwCNTCOOH-PALII (2 m NH3, pH 10.0, 15 bar) between 30-80 °C indicated no significant loss of activity over 72 h up to 60 °C. SwCNTCOOH-PALII in the continuous-flow system at 30 °C was more productive (specific reaction rate, rflow=2.39 μmol min-1 g-1) than in the batch reaction (rbatch=1.34 μmol min-1 g-1).

Cell-free Biosystems in the Production of Electricity and Bioenergy

: Increasing needs of green energy and concerns of climate change are motivating intensive R&D efforts toward the low-cost production of electricity and bioenergy, such as hydrogen, alcohols, and jet fuel, from renewable sugars. Cell-free biosystems for biomanufacturing (CFB2) have been suggested as an emerging platform to replace mainstream microbial fermentation for the cost-effective production of some biocommodities. As compared to whole-cell factories, cell-free biosystems comprised of synthetic enzymatic pathways have numerous advantages, such as high product yield, fast reaction rate, broad reaction condition, easy process control and regulation, tolerance of toxic compound/product, and an unmatched capability of performing unnatural reactions. However, issues pertaining to high costs and low stabilities of enzymes and cofactors as well as compromised optimal conditions for different source enzymes need to be solved before cell-free biosystems are scaled up for biomanufacturing. Here, we review the current status of cell-free technology, update recent advances, and focus on its applications in the production of electricity and bioenergy.

Enhanced enzyme activity through electron transfer between single-walled carbon nanotubes and horseradish peroxidase

Better understanding of electron transfer (ET) taking place at the nano-bio interface can guide design of more effective functional materials used in fuel cells, biosensors, and medical devices. Single-walled carbon nanotube (SWCNT) coupled with biological enzymes serves as a model system for studying the ET mechanism, as demonstrated in the present study. SWCNT enhanced the activity of horseradish peroxidase (HRP) in the solution-based redox reaction by binding to HRP at a site proximate to the enzyme's activity center and participating in the ET process. ET to and from SWCNT was clearly observable using near-infrared spectroscopy. The capability of SWCNT in receiving electrons and the direct attachment of HRP to the surface of SWCNT strongly affected the enzyme activity due to the direct involvement of SWCNT in ET.

Modulation of fibroblast inflammatory response by surface modification of a perfluorinated ionomer

An ideal surface for implantable glucose sensors would be able to evade the events leading to chronic inflammation and fibrosis, thereby extending its utility in an in vivo environment. Nafion™, a perfluorinated ionomer, is the membrane material preferred for in situ glucose sensors. Unfortunately, the surface properties of Nafion™ promote random protein adsorption and eventual foreign body encapsulation, thus leading to loss of glucose signal over time. Details of the techniques to render Nafion™ nonprotein fouling are given in a previous article [T. I. Valdes et al., Biomaterials 29, 1356 (2008)]. Once random protein adsorption is prevented, a biologically active peptide can be covalently bonded to the treated Nafion™ to induce cellular adhesion. Cellular responses to these novel decorated Nafion™ surfaces are detailed here, including cell viability, cell spreading, and type I collagen synthesis. Normal human dermal fibroblasts (NHDFs) were cultured on control and modified Nafion™ surfaces. Findings indicate that Nafion™ modified with 10% 2-hydroxyethyl methacrylate and 90% tetraglyme created a nonfouling surface that was subsequently decorated with the YRGDS peptide. NHDFs were shown to have exhibited decreased type I collagen production in comparison to NHDF cells on unmodified Nafion™ surfaces. Here, the authors report evidence that proves that optimizing conditions to prevent protein adsorption and enhance cellular adhesion may eliminate fibrous encapsulation of an implant.

Enzymes immobilized on carbon nanotubes

Enzyme immobilizations on carbon nanotubes for fabrication of biosensors and biofuel cells and for preparation of biocatalysts are rapidly emerging as new research areas. Various immobilization methods have been developed, and in particular, specific attachment of enzymes on carbon nanotubes has been an important focus of attention. The method of immobilization has an effect on the preservation of the enzyme structure and retention of the native biological function of the enzyme. In this review, we focus on recent advances in methodology for enzyme immobilization on carbon nanotubes.

Reversible his-tagged enzyme immobilization on functionalized carbon nanotubes as nanoscale biocatalyst

Common enzyme immobilization methods on nanomaterials (adsorption, covalent binding, crosslinking, encapsulation) often generate problems in enzyme leaching, 3D structure change and diffusion resistance. We show here a detailed site-specific enzyme immobilization method that overcomes the foresaid limitations. It is based on the specific interaction between His-tagged enzyme and single-walled carbon nanotubes modified with N (α) ,N (α)-bis(carboxymethyl)-L: -lysine hydrate. This method does not require enzyme purification and the resulting nanoscale biocatalyst can maintain high enzyme activity and stability. The enzyme-loading capacity is also comparable with the reported immobilization capacity on carbon nanotubes by either covalent binding or adsorption. Furthermore, the immobilization is reversible for several cycles while maintaining high enzyme activity and the nanoscale biocatalyst can be regenerated easily.