Advancements in 3D-printable polysaccharides, proteins, and synthetic polymers for wound dressing and skin scaffolding - A review

This review investigates the most recent advances in personalized 3D-printed wound dressings and skin scaffolding. Skin is the largest and most vulnerable organ in the human body. The human body has natural mechanisms to restore damaged skin through several overlapping stages. However, the natural wound healing process can be rendered insufficient due to severe wounds or disturbances in the healing process. Wound dressings are crucial in providing a protective barrier against the external environment, accelerating healing. Although used for many years, conventional wound dressings are neither tailored to individual circumstances nor specific to wound conditions. To address the shortcomings of conventional dressings, skin scaffolding can be used for skin regeneration and wound healing. This review thoroughly investigates polysaccharides (e.g., chitosan, Hyaluronic acid (HA)), proteins (e.g., collagen, silk), synthetic polymers (e.g., Polycaprolactone (PCL), Poly lactide-co-glycolic acid (PLGA), Polylactic acid (PLA)), as well as nanocomposites (e.g., silver nano particles and clay materials) for wound healing applications and successfully 3D printed wound dressings. It discusses the importance of combining various biomaterials to enhance their beneficial characteristics and mitigate their drawbacks. Different 3D printing fabrication techniques used in developing personalized wound dressings are reviewed, highlighting the advantages and limitations of each method. This paper emphasizes the exceptional versatility of 3D printing techniques in advancing wound healing treatments. Finally, the review provides recommendations and future directions for further research in wound dressings.

β-Glucans obtained from fungus for wound healing: A review

The cell surface of fungus contains a large number of β-glucans, which exhibit various biological activities such as immunomodulatory, anti-inflammatory, and antioxidation. Fungal β-glucans with highly branched structure show great potential as wound healing reagents, because they can stimulate the expression of many immune- and inflammatory-related factors beneficial to wound healing. Recently, the wound healing ability of many fungal β-glucans have been investigated in animals and clinical trials. Studies have proved that fungal β-glucans can promote fibroblasts proliferation, collagen deposition, angiogenesis, and macrophage infiltration during the wound healing process. However, the development of fungal β-glucans as wound healing reagents is not systematically reviewed till now. This review discusses the wound healing studies of β-glucans obtained from different fungal species. The structure characteristics, extraction methods, and biological functions of fungal β-glucans with wound healing ability are summarized. Researches about fungal β-glucan-containing biomaterials and structurally modified β-glucans for wound healing are also involved.

Engineering periodontal tissue interfaces using multiphasic scaffolds and membranes for guided bone and tissue regeneration

Periodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.

Bone Scaffold Materials in Periodontal and Tooth-supporting Tissue Regeneration: A Review

BACKGROUND AND OBJECTIVES

Periodontium is an important tooth-supporting tissue composed of both hard (alveolar bone and cementum) and soft (gingival and periodontal ligament) sections. Due to the multi-tissue architecture of periodontium, reconstruction of each part can be influenced by others. This review focuses on the bone section of the periodontium and presents the materials used in tissue engineering scaffolds for its reconstruction.

MATERIALS AND METHODS

The following databases (2015 to 2021) were electronically searched: ProQuest, EMBASE, SciFinder, MRS Online Proceedings Library, Medline, and Compendex. The search was limited to English-language publications and in vivo studies.

RESULTS

Eighty-three articles were found in primary searching. After applying the inclusion criteria, seventeen articles were incorporated into this study.

CONCLUSION

In complex periodontal defects, various types of scaffolds, including multilayered ones, have been used for the functional reconstruction of different parts of periodontium. While there are some multilayered scaffolds designed to regenerate alveolar bone/periodontal ligament/cementum tissues of periodontium in a hierarchically organized construct, no scaffold could so far consider all four tissues involved in a complete periodontal defect. The progress and material considerations in the regeneration of the bony part of periodontium are presented in this work to help investigators develop tissue engineering scaffolds suitable for complete periodontal regeneration.

Investigation and multiscale modeling of PVA/SA coated poly lactic acid scaffold containing curcumin loaded layered double hydroxide nanohybrids

Applying hydrophilic coatings on polymeric nanofibers combined with layered double hydroxide (LDH) not only enhances the efficiency of drug delivery systems but also increases cell adhesion. This work aimed to prepare poly(vinyl alcohol)/sodium alginate (PVA/SA) (2/1)-coated poly(lactic acid) (PLA) nanofibers containing curcumin-loaded layered double hydroxide (LDH) and to investigate their drug release and mechanical properties and their biocompatibility. The optimum PLA nanofibrous sample was considered to be that based on 3 wt% of curcumin-loaded LDH (PLA-3%LDH) with a drug encapsulation efficiency of ∼18% in which a minimum average nanofiber diameter of ∼476 nm along with a high tensile strength of 3.00 MPa were obtained. In the next step, a PVA/SA (2/1) layer was coated on the PLA-3%LDH; as a result, the hydrophilicity of the sample was improved and the elongation at break was decreased remarkably. In this regard the cell viability reached 80% for the coated PLA. Moreover, the formation of a layer of (PVA/SA) on the PLA nanofibers lowered the burst release and resulted in a more sustained drug release, which is a vital feature in dermal applications. A multiscale modeling method was applied for simulation of the mechanical properties of the composite scaffold and the results showed that this method can predict the data with 83% accuracy. The results of this study indicate that the formation of a layer of PVA/SA (2/1) has a significant effect on hydrophilicity and consequently improves cell adhesion and proliferation.

Recent advances in modified poly (lactic acid) as tissue engineering materials

As an emerging science, tissue engineering and regenerative medicine focus on developing materials to replace, restore or improve organs or tissues and enhancing the cellular capacity to proliferate, migrate and differentiate into different cell types and specific tissues. Renewable resources have been used to develop new materials, resulting in attempts to produce various environmentally friendly biomaterials. Poly (lactic acid) (PLA) is a biopolymer known to be biodegradable and it is produced from the fermentation of carbohydrates. PLA can be combined with other polymers to produce new biomaterials with suitable physicochemical properties for tissue engineering applications. Here, the advances in modified PLA as tissue engineering materials are discussed in light of its drawbacks, such as biological inertness, low cell adhesion, and low degradation rate, and the efforts conducted to address these challenges toward the design of new enhanced alternative biomaterials.

PVA/Chitosan Thin Films Containing Silver Nanoparticles and Ibuprofen for the Treatment of Periodontal Disease

Local delivery of drugs or antimicrobial agents is a suitable approach in the management of periodontitis when the infection is localized deep in the pockets and does not adequately respond to mechanical debridement and/or systemic antibiotic treatment. In this context, the objective of this study was to prepare new biocomposite films with antimicrobial, anti-inflammatory, and good mechanical properties to be applied in periodontal pockets. The composite film is eco-friendly synthesized from poly(vinyl alcohol) (PVA) cross-linked with oxidized chitosan (OxCS). Silver nanoparticles (AgNps) were inserted during film synthesis by adding freshly chitosan-capped AgNps colloidal solution to the polymer mixture; the addition of AgNps up to 1.44 wt.% improves the physico-chemical properties of the film. The characterization of the films was performed by FT-IR, atomic mass spectrometry, X-ray spectroscopy, and SEM. The films displayed a high swelling ratio (162%), suitable strength (1.46 MPa), and excellent mucoadhesive properties (0.6 N). Then, ibuprofen (IBF) was incorporated within the best film formulation, and the IBF-loaded PVA/OxCS-Ag films could deliver the drug in a sustained manner up to 72 h. The biocomposite films have good antimicrobial properties against representative pathogens for oral cavities. Moreover, the films are biocompatible, as demonstrated by in vitro tests on HDFa cell lines.

Modulation of the Immune System Promotes Tissue Regeneration

The immune system plays an essential role in the angiogenesis, repair, and regeneration of damaged tissues. Therefore, the design of scaffolds that manipulate immune cells and factors in such a way that could accelerate the repair of damaged tissues, following implantation, is one of the main goals of regenerative medicine. However, before manipulating the immune system, the function of the various components of the immune system during the repair process should be well understood and the fabrication conditions of the manipulated scaffolds should be brought closer to the physiological state of the body. In this article, we first review the studies aimed at the role of distinct immune cell populations in angiogenesis and support of damaged tissue repair. In the second part, we discuss the use of strategies that promote tissue regeneration by modulating the immune system. Given that various studies have shown an increase in tissue repair rate with the addition of stem cells and growth factors to the scaffolds, and regarding the limited resources of stem cells, we suggest the design of scaffolds that are capable to develop repair of damaged tissue by manipulating the immune system and create an alternative for repair strategies that use stem cells or growth factors.

Polyelectrolyte-Coated Mesoporous Bioactive Glasses via Layer-by-Layer Deposition for Sustained Co-Delivery of Therapeutic Ions and Drugs

In the field of bone regeneration, considerable attention has been addressed towards the use of mesoporous bioactive glasses (MBGs), as multifunctional therapeutic platforms for advanced medical devices. In fact, their extremely high exposed surface area and pore volume allow to load and the release of several drugs, while their framework can be enriched with specific therapeutic ions allowing to boost the tissue regeneration. However, due to the open and easily accessible mesopore structure of MBG, the release of the incorporated therapeutic molecules shows an initial burst effect leading to unsuitable release kinetics. Hence, a still open challenge in the design of drug delivery systems based on MBGs is the control of their release behavior. In this work, Layer-by-layer (LbL) deposition of polyelectrolyte multi-layers was exploited as a powerful and versatile technique for coating the surface of Cu-substituted MBG nanoparticles with innovative multifunctional drug delivery systems for co-releasing of therapeutic copper ions (exerting pro-angiogenic and anti-bacterial effects) and an anti-inflammatory drug (ibuprofen). Two different routes were investigated: in the first strategy, chitosan and alginate were assembled by forming the multi-layered surface, and, successively, ibuprofen was loaded by incipient wetness impregnation, while in the second approach, alginate was replaced by ibuprofen, introduced as polyelectrolyte layer. Zeta-potential, TGA and FT-IR spectroscopy were measured after the addition of each polyelectrolyte layer, confirming the occurrence of the stepwise deposition. In addition, the in vitro bioactivity and the ability to modulate the release of the cargo were evaluated. The polyelectrolyte coated-MBGs were proved to retain the peculiar ability to induce hydroxyapatite formation after 7 days of soaking in Simulated Body Fluid. Both copper ions and ibuprofen were co-released over time, showing a sustained release profile up to 14 days and 24 h, respectively, with a significantly lower burst release compared to the bare MBG particles.

Review on Computer-Aided Design and Manufacturing of Drug Delivery Scaffolds for Cell Guidance and Tissue Regeneration

In the last decade, additive manufacturing (AM) processes have updated the fields of biomaterials science and drug delivery as they promise to realize bioengineered multifunctional devices and implantable tissue engineering (TE) scaffolds virtually designed by using computer-aided design (CAD) models. However, the current technological gap between virtual scaffold design and practical AM processes makes it still challenging to realize scaffolds capable of encoding all structural and cell regulatory functions of the native extracellular matrix (ECM) of health and diseased tissues. Indeed, engineering porous scaffolds capable of sequestering and presenting even a complex array of biochemical and biophysical signals in a time- and space-regulated manner, require advanced automated platforms suitable of processing simultaneously biomaterials, cells, and biomolecules at nanometric-size scale. The aim of this work was to review the recent scientific literature about AM fabrication of drug delivery scaffolds for TE. This review focused on bioactive molecule loading into three-dimensional (3D) porous scaffolds, and their release effects on cell fate and tissue growth. We reviewed CAD-based strategies, such as bioprinting, to achieve passive and stimuli-responsive drug delivery scaffolds for TE and cancer precision medicine. Finally, we describe the authors' perspective regarding the next generation of CAD techniques and the advantages of AM, microfluidic, and soft lithography integration for enhancing 3D porous scaffold bioactivation toward functional bioengineered tissues and organs.

TCP/PLGA composite scaffold loaded rapamycin in situ enhances lumbar fusion by regulating osteoblast and osteoclast activity

The purpose of this study was to develop a novel β-tricalcium phosphate (TCP)/poly (D,L-lactic-co-glycolic acid) (PLGA) composite scaffold loaded with rapamycin that can regulate the activity of osteoblasts and osteoclasts for lumbar fusion. The TCP/PLGA composite scaffold was fabricated by cryogenic three-dimensional printing techniques and then loaded with rapamycin in situ. The structural surface morphology of the composite scaffold was tested with scanning electron microscope. To evaluate the biocompatibility of the composite scaffold in vitro, bone marrow mesenchymal stem cells (BMSCs) were cultured on the TCP/PLGA composite scaffold slide and tested with Live/Dead Viability Kit. The effect of rapamycin on osteoclast and osteoblast was studied with staining and Western blotting. The in vitro results showed that the rapamycin-loaded TCP/PLGA composite scaffold showed good biocompatibility with BMSC and released rapamycin obviously promoted the osteoblast differentiation and mineralization. In vivo study, the TCP/PLGA composite scaffold loaded with rapamycin were implanted in lumbar fusion model and study with micro-computed tomography scanning, hematoxylin-eosin, Masson, and immune-histological staining, to evaluate the effect of rapamycin on bone fusion. The in vivo results demonstrated that rapamycin-loaded TCP/PLGA composite scaffold could enhance bone formation by regulating osteoblast and osteoclast activity, respectively. In this study, the TCP/PLGA composite scaffold loaded with rapamycin was confirmed to provide great compatibility and improved performance in lumbar fusion by regulating osteoblastic and osteoclastic activity and would be a promising composite biomaterial for bone tissue engineering.

Controlled local release of PPARγ agonists from biomaterials to treat peripheral nerve injury

OBJECTIVE

Poor clinical outcomes following peripheral nerve injury (PNI) are partly attributable to the limited rate of neuronal regeneration. Despite numerous potential drug candidates demonstrating positive effects on nerve regeneration rate in preclinical models, no drugs are routinely used to improve restoration of function in clinical practice. A key challenge associated with clinical adoption of drug treatments in nerve injured patients is the requirement for sustained administration of doses associated with undesirable systemic sideeffects. Local controlled-release drug delivery systems could potentially address this challenge, particularly through the use of biomaterials that can be implanted at the repair site during the microsurgical repair procedure.

APPROACH

In order to test this concept, this study used various biomaterials to deliver ibuprofen sodium or sulindac sulfide locally in a controlled manner in a rat sciatic nerve injury model. Following characterisation of release parameters in vitro, ethylene vinyl acetate tubes or polylactic-co-glycolic acid wraps, loaded with ibuprofen sodium or sulindac sulfide, were placed around directly-repaired nerve transection or nerve crush injuries in rats.

MAIN RESULTS

Ibuprofen sodium, but not sulindac sulfide caused an increase in neurites in distal nerve segments and improvements in functional recovery in comparison to controls with no drug treatment.

SIGNIFICANCE

This study showed for the first time that local delivery of ibuprofen sodium using biomaterials improves neurite growth and functional recovery following PNI and provides the basis for future development of drug-loaded biomaterials suitable for clinical translation.

Development of NSAID-loaded nano-composite scaffolds for skin tissue engineering applications

Scar free healing together with pain management is one of the major considerations in full thickness wound healing. Extensive wounds take longer to heal without any clinical intervention and, hence, need natural or artificial extracellular matrix support for quick skin regeneration. To address these issues, medicated 3D porous biomimetic scaffolds were developed with a unique combination of biopolymers, that is, chitosan, sodium alginate, and elastin, supplemented with a non-steroidal anti-inflammatory drug (NSAID). Scaffolds were physically characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), swelling ratio analysis, and degradation studies. Findings of the performed analyses proved that these skin substitutes suitable for skin tissue engineering applications attributable to their nano-microporous structures (pore size in range of 0.085-256 μm) allowing cell infiltration and high-water absorption capacity for management of wound exudates. Optimal dose of the loaded ibuprofen was estimated by evaluating effect of variable concentrations of ibuprofen (control, ILM-10, ILM-15, and ILM-20) on adipose tissue-derived mesenchymal stem cells (ASCs) proliferation rate. Out of all experimental groups, ILM-20 constructs were found to accelerate the proliferation rate of seeded ASCs confirming their non-cytotoxic characteristics as well potential to be used for translational scaffold-based therapies.

Silk based scaffolds with immunomodulatory capacity: anti-inflammatory effects of nicotinic acid

Here we show that 3D silk scaffolds loaded with nicotinic acid have great potential for tissue engineering due to their excellent cytocompatibility and ability to decrease the expression of proinflammatory markers in a concentration dependent manner.

Fast Dissolving Oral Drug Delivery System Based on Electrospun Nanofibrous Webs of Cyclodextrin/Ibuprofen Inclusion Complex Nanofibers

In this study, the polymer-free electrospinning was performed in order to produce cyclodextrin/ibuprofen inclusion complex nanofibers, which could have potential as the fast dissolving oral drug delivery system. Ibuprofen is a poorly water-soluble nonsteroidal anti-inflammatory drug; however, the water solubility of ibuprofen can be significantly enhanced by inclusion complexation with cyclodextrins. Here, hydroxypropyl-beta-cyclodextrin (HPβCyD) was chosen both as a nanofiber matrix and host molecule for inclusion complexation in order to enhance water solubility and fast dissolution of ibuprofen. Ibuprofen was inclusion-complexed with HPβCyD in highly concentrated aqueous solutions of HPβCyD (200%, w/v) having two different molar ratios: 1:1 and 2:1 (HPβCyD/ibuprofen). The HPβCyD/ibuprofen-IC (1:1) aqueous solution was turbid having some undissolved/uncomplexed ibuprofen, whereas HPβCyD/ibuprofen-IC (2:1) aqueous solution was homogeneous and clear, indicating that ibuprofen was totally complexed with HPβCyD and becomes water soluble. Then, both HPβCyD/ibuprofen-IC solutions (1:1 and 2:1) were electrospun into bead-free and uniform nanofibers having ∼200 nm fiber diameter. The electrospun HPβCyD/ibuprofen-IC nanofibers were obtained as nanofibrous webs having self-standing and flexible character, which is appropriate for fast dissolving oral drug delivery systems. Ibuprofen was completely preserved during the electrospinning process, and the resulting electrospun HPβCyD/ibuprofen-IC nanofibers were produced without any loss of ibuprofen by preserving the initial molar ratio of 1:1 and 2:1 (HPβCyD/ibuprofen). X-ray diffraction and differential scanning calorimetry measurements indicated the presence of some crystalline ibuprofen in HPβCyD/ibuprofen-IC (1:1) nanofibers, whereas ibuprofen was totally in the amorphous state in HPβCyD/ibuprofen-IC (2:1) nanofibers. Nonetheless, both HPβCyD/ibuprofen-IC (1:1 and 2:1) nanofibrous webs have shown very fast dissolving character when contacted with water or when wetted with artificial saliva. In brief, our results revealed that electrospun HPβCyD/ibuprofen-IC nanofibrous webs have potential as fast dissolving oral drug delivery systems.

Mucoadhesive Electrospun Patch Delivery of Lidocaine to the Oral Mucosa and Investigation of Spatial Distribution in a Tissue Using MALDI-Mass Spectrometry Imaging

Many oral mucosal conditions cause considerable and prolonged pain that to date has been difficult to alleviate via topical delivery, and the use of injection causes many patients dental anxiety and needle-prick pain. Therefore, developing a noninjectable drug delivery system as an alternative administration procedure may vastly improve the health and wellbeing of these patients. Recent advances in the development of mucoadhesive electrospun patches for the direct delivery of therapeutics to the oral mucosa offer a potential solution, but as yet, the release of local anesthetics from this system and their uptake by oral tissue have not been demonstrated. Here, we demonstrate the fabrication of lidocaine-loaded electrospun fiber patches, drug release, and subsequent uptake and permeation through the porcine buccal mucosa. Lidocaine HCl and lidocaine base were incorporated into the electrospun patches to evaluate the difference in drug permeation for the two drug compositions. Lidocaine released from the lidocaine HCl-containing electrospun patches was significantly quicker than from the lidocaine base patches, with double the amount of drug released from the lidocaine HCl patches in the first 15 min (0.16 ± 0.04 mg) compared to that from the lidocaine base patches (0.07 ± 0.01 mg). The permeation of lidocaine from the lidocaine HCl electrospun patches through ex vivo porcine buccal mucosa was also detected in 15 min, whereas permeation of lidocaine from the lidocaine base patch was not detected. Matrix-assisted laser desorption ionization-mass spectrometry imaging was used to investigate localization of lidocaine within the oral tissue. Lidocaine in the solution as well as from the mucoadhesive patch penetrated into the buccal mucosal tissue in a time-dependent manner and was detectable in the lamina propria after only 15 min. Moreover, the lidocaine released from lidocaine HCl electrospun patches retained biological activity, inhibiting veratridine-mediated opening of voltage-gated sodium channels in SH-SY5Y neuroblastoma cells. These data suggest that a mucoadhesive electrospun patch may be used as a vehicle for rapid uptake and sustained anesthetic drug delivery to treat or prevent oral pain.

Biomaterials: Foreign Bodies or Tuners for the Immune Response?

The perspectives of regenerative medicine are still severely hampered by the host response to biomaterial implantation, despite the robustness of technologies that hold the promise to recover the functionality of damaged organs and tissues. In this scenario, the cellular and molecular events that decide on implant success and tissue regeneration are played at the interface between the foreign body and the host inflammation, determined by innate and adaptive immune responses. To avoid adverse events, rather than the use of inert scaffolds, current state of the art points to the use of immunomodulatory biomaterials and their knowledge-based use to reduce neutrophil activation, and optimize M1 to M2 macrophage polarization, Th1 to Th2 lymphocyte switch, and Treg induction. Despite the fact that the field is still evolving and much remains to be accomplished, recent research breakthroughs have provided a broader insight on the correct choice of biomaterial physicochemical modifications to tune the reaction of the host immune system to implanted biomaterial and to favor integration and healing.

Bulk Modification of Poly(lactide) (PLA) via Copolymerization with Poly(propylene glycol) Diglycidylether (PPGDGE)

Copolymers of l-lactide and poly(propylene glycol) diglycidyl ether (PPGDGE₃₈₀) were synthesized by ring opening polymerization (ROP). Stannous octoate was used as the catalyst and 1-dodecanol as the initiator. The effect of the variables on the thermal properties of the copolymers was investigated by differential scanning calorimetry (DSC). Contact angle measurements were made in order to study the wettability of the synthesized copolymers. The copolymers differed widely in their physical characteristics, ranging from weak elastomers to tougher thermoplastics, according to the ratio of l-lactide and PPGDGE₃₈₀. The results showed that the copolymers were more hydrophilic than neat Poly(lactide) (PLA) and the monomer ratio had a strong influence on the hydrophilic properties.

One-step fabrication of functionalized poly(l-lactide) porous fibers by electrospinning and the adsorption/separation abilities

In this work, novel functionalized poly(l-lactide) (F-PLLA) porous fibers were fabricated through electrospinning using the PLLA/methylene chloride (CH₂Cl₂)/N,N-dimethylformamide (DMF) solution containing diethylenetriamine (DETA) and γ-aminopropyltriethoxysilane (KH-550). The effects of PLLA, DETA and KH-550 contents on the morphologies of the electrospun fibers were systematically investigated, and the results showed that at PLLA, DETA and KH-550 contents of 20% w/v, 2 wt% and 3 wt%, respectively, the electrospun F-PLLA fibers exhibited the homogeneous distribution of fiber diameters and the homogeneous porous structure on the fiber surface. Nitrogen-containing groups were successfully introduced to the electrospun fibers, which induced the great improvement of the hydrophilicity of the membrane surface. Adsorption measurements showed that the electrospun F-PLLA membrane had good adsorption ability toward Congo red (CR), and the adsorption capacity at room temperature was enhanced in 16 times compared with the common PLLA fiber membrane, and the maximum adsorption capacity was 135.7 mg g^-1. Furthermore, the adsorption behavior could be well described by the pseudo second-order model. Oil/water separating measurements showed that the electrospun F-PLLA membrane exhibited high separation efficiency and the maximum water fluxes were 2018 and 1861 L m^-2  h^-1 in separating non-emulsified and emulsified oil/water system under atmospheric pressure, respectively.

Synthesis of a Novel Electrospun Polycaprolactone Scaffold Functionalized with Ibuprofen for Periodontal Regeneration: An In Vitro andIn Vivo Study

Ibuprofen (IBU) has been shown to improve periodontal treatment outcomes. The aim of this study was to develop a new anti-inflammatory scaffold by functionalizing an electrospun nanofibrous poly-ε-caprolactone membrane with IBU (IBU-PCL) and to evaluate its impact on periodontal inflammation, wound healing and regeneration in vitro and in vivo. IBU-PCL was synthesized through electrospinning. The effects of IBU-PCL on the proliferation and migration of epithelial cells (EC) and fibroblasts (FB) exposed to Porphyromonas gingivlais lipopolysaccharide (Pg-LPS) were evaluated through the AlamarBlue test and scratch assay, respectively. Anti-inflammatory and remodeling properties were investigated through Real time qPCR. Finally, the in vivo efficacy of the IBU-PCL membrane was assessed in an experimental periodontitis mouse model through histomorphometric analysis. The results showed that the anti-inflammatory effects of IBU on gingival cells were effectively amplified using the functionalized membrane. IBU-PCL reduced the proliferation and migration of cells challenged by Pg-LPS, as well as the expression of fibronectin-1, collagen-IV, integrin α3β1 and laminin-5. In vivo, the membranes significantly improved the clinical attachment and IBU-PCL also reduced inflammation-induced bone destruction. These data showed that the IBU-PCL membrane could efficiently and differentially control inflammatory and migratory gingival cell responses and potentially promote periodontal regeneration.

Maxillary Bone Regeneration Based on Nanoreservoirs Functionalized ε-Polycaprolactone Biomembranes in a Mouse Model of Jaw Bone Lesion

Current approaches of regenerative therapies constitute strategies for bone tissue reparation and engineering, especially in the context of genetical diseases with skeletal defects. Bone regeneration using electrospun nanofibers' implant has the following objectives: bone neoformation induction with rapid healing, reduced postoperative complications, and improvement of bone tissue quality. In vivo implantation of polycaprolactone (PCL) biomembrane functionalized with BMP-2/Ibuprofen in mouse maxillary defects was followed by bone neoformation kinetics evaluation using microcomputed tomography. Wild-Type (WT) and Tabby (Ta) mice were used to compare effects on a normal phenotype and on a mutant model of ectodermal dysplasia (ED). After 21 days, no effect on bone neoformation was observed in Ta treated lesion (4% neoformation compared to 13% in the control lesion). Between the 21st and the 30th days, the use of biomembrane functionalized with BMP-2/Ibuprofen in maxillary bone lesions allowed a significant increase in bone neoformation peaks (resp., +8% in mutant Ta and +13% in WT). Histological analyses revealed a neoformed bone with regular trabecular structure, areas of mineralized bone inside the membrane, and an improved neovascularization in the treated lesion with bifunctionalized membrane. In conclusion, PCL functionalized biomembrane promoted bone neoformation, this effect being modulated by the Ta bone phenotype responsible for an alteration of bone response.

Functional electrospun fibers for the treatment of human skin wounds

Wounds are trauma induced defects of the human skin involving a multitude of endogenous biochemical events and cellular reactions of the immune system. The healing process is extremely complex and affected by the patient's physiological conditions, potential implications like infectious pathogens and inflammation as well as external factors. Due to increasing incidence of chronic wounds and proceeding resistance of infection pathogens, there is a strong need for effective therapeutic wound care. In this context, electrospun fibers with diameters in the nano- to micrometer range gain increasing interest. While resembling the structure of the native human extracellular matrix, such fiber mats provide physical and mechanical protection (including protection against bacterial invasion). At the same time, the fibers allow for gas exchange and prevent occlusion of the wound bed, thus facilitating wound healing. In addition, drugs can be incorporated within such fiber mats and their release can be adjusted by the material and dimensions of the individual fibers. The review gives a comprehensive overview about the current state of electrospun fibers for therapeutic application on skin wounds. Different materials as well as fabrication techniques are introduced including approaches for incorporation of drugs into or drug attachment onto the fiber surface. Against the background of wound pathophysiology and established therapy approaches, the therapeutic potential of electrospun fiber systems is discussed. A specific focus is set on interactions of fibers with skin cells/tissues as well as wound pathogens and strategies to modify and control them as key aspects for developing effective wound therapeutics. Further, advantages and limitations of controlled drug delivery from fiber mats to skin wounds are discussed and a future perspective is provided.

Electrospun PLGA Nanofiber Scaffolds Release Ibuprofen Faster and Degrade Slower After In Vivo Implantation

While delayed delivery of non-steroidal anti-inflammatory drugs (NSAIDs) has been associated with improved tendon healing, early delivery has been associated with impaired healing. Therefore, NSAID use is appropriate only if the dose, timing, and mode of delivery relieves pain but does not impede tissue repair. Because delivery parameters can be controlled using drug-eluting nanofibrous scaffolds, our objective was to develop a scaffold for local controlled release of ibuprofen (IBP), and characterize the release profile and degradation both in vitro and in vivo. We found that when incubated in vitro in saline, scaffolds containing IBP had a linear release profile. However, when implanted subcutaneously in vivo or when incubated in vitro in serum, scaffolds showed a rapid burst release. These data demonstrate that scaffold properties are dependent on the environment in which they are placed and the importance of using serum, rather than saline, for initial in vitro evaluation of biofactor release from biodegradable scaffolds.

Functionalization of electrospun polymeric wound dressings with antimicrobial peptides

Wound dressings have evolved considerably since ancient times. Modern dressings are now important systems that combine the physical and biochemical properties of natural and synthetic polymers with active compounds that are beneficial to wound healing. Antimicrobial peptides (AMPs) are the most recent addition to these systems. These aim to control the microbial proliferation and colonization of pathogens and to modulate the host's immune response. In the last decade, electrospun wound dressings have been extensively studied and the electrospinning technique recognized as an efficient approach for the production of nanoscale fibrous mats. The control of the electrospinning processing parameters, the selection of the polymer and AMPs, and the definition of the most appropriate AMPs' functionalization method contribute to the successful treatment of acute and chronic wounds. Although the use of electrospinning in wound dressings' production has been previously reviewed, the increased development of AMPs and the establishment of functionalization methods for wound dressings over recent years has increased the need for such research. In the present review, we approach all these subjects and reveal the promising therapeutic potential of wound dressings functionalized with AMPs.

Promoting tissue regeneration by modulating the immune system

The immune system plays a central role in tissue repair and regeneration. Indeed, the immune response to tissue injury is crucial in determining the speed and the outcome of the healing process, including the extent of scarring and the restoration of organ function. Therefore, controlling immune components via biomaterials and drug delivery systems is becoming an attractive approach in regenerative medicine, since therapies based on stem cells and growth factors have not yet proven to be broadly effective in the clinic. To integrate the immune system into regenerative strategies, one of the first challenges is to understand the precise functions of the different immune components during the tissue healing process. While remarkable progress has been made, the immune mechanisms involved are still elusive, and there is indication for both negative and positive roles depending on the tissue type or organ and life stage. It is well recognized that the innate immune response comprising danger signals, neutrophils and macrophages modulates tissue healing. In addition, it is becoming evident that the adaptive immune response, in particular T cell subset activities, plays a critical role. In this review, we first present an overview of the basic immune mechanisms involved in tissue repair and regeneration. Then, we highlight various approaches based on biomaterials and drug delivery systems that aim at modulating these mechanisms to limit fibrosis and promote regeneration. We propose that the next generation of regenerative therapies may evolve from typical biomaterial-, stem cell-, or growth factor-centric approaches to an immune-centric approach.

STATEMENT OF SIGNIFICANCE

Most regenerative strategies have not yet proven to be safe or reasonably efficient in the clinic. In addition to stem cells and growth factors, the immune system plays a crucial role in the tissue healing process. Here, we propose that controlling the immune-mediated mechanisms of tissue repair and regeneration may support existing regenerative strategies or could be an alternative to using stem cells and growth factors. The first part of this review we highlight key immune mechanisms involved in the tissue healing process and marks them as potential target for designing regenerative strategies. In the second part, we discuss various approaches using biomaterials and drug delivery systems that aim at modulating the components of the immune system to promote tissue regeneration.

Photocrosslinkable polyaspartamide/polylactide copolymer and its porous scaffolds for chondrocytes

With the aim to produce, by a simple and reproducible technique, porous scaffolds potentially employable for tissue engineering purposes, in this work, we have synthesized a methacrylate (MA) copolymer of α,β-poly(N-2-hydroxyethyl)-dl-aspartamide (PHEA) and polylactic acid (PLA). PHEA-PLA-MA has been dissolved in organic solvent at different concentrations in the presence of NaCl particles with different granulometry, and through UV irradiation and further salt leaching technique, various porous scaffolds have been prepared. Obtained samples have been characterized by scanning electron microscopy and their porosity has been evaluated as well as their degradation profile in aqueous medium in the absence or in the presence of esterase from porcine liver. PHEA-PLA-MA scaffold that has shown homogeneous porosity and the best degradation profile has been further characterized to study its mechanical properties along with its capacity to incorporate and to control the release of dexamethasone. Finally, the ability to allow a three-dimensional culture of bovine articular chondrocytes have been also investigated.

One-pot preparation of polylactic acid-ibuprofen conjugates and their performance characterization

Merging esterification modification, carrier preparation, and chemical conjugation into a one-pot reaction as a new strategy for developing the polylactic acid-ibuprofen conjugates is described.

Application of Tissue Engineering to Pelvic Organ Prolapse and Stress Urinary Incontinence

Synthetic or biological materials can be used for the surgical repair of pelvic organ prolapse (POP) or stress urinary incontinence (SUI). While non-degradable synthetic mesh has a low failure rate, it is prone to complications such as infection and erosion, particularly in the urological/gynecological setting when subject to chronic influences of gravity and intermittent, repetitive strain. Biological materials have lower complication rates, although allografts and xenografts have a high risk of failure and the theoretical risk of infection. Autografts are used successfully for the treatment of SUI and are not associated with erosion; however, can lead to morbidity at the donor site. Tissue engineering has thus become the focus of interest in recent years as researchers seek an ideal tissue remodeling material for urogynecological repair. Herein, we review the directions of current and future research in this exciting field. Electrospun poly-L-lactic acid (PLA) and porcine small intestine submucosa (SIS) are two promising scaffold material candidates. Adipose-derived stem cells (ADSCs) appear to be a suitable cell type for scaffold seeding, and cells grown on scaffolds when subjected to repetitive biaxial strain show more appropriate biomechanical properties for clinical implantation. After implantation, an appropriate level of acute inflammation is important to precipitate moderate fibrosis and encourage tissue strength. New research directions include the use of bioactive materials containing compounds that may help facilitate integration of the new tissue. More research with longer follow-up is needed to ascertain the most successful and safe methods and materials for pelvic organ repair and SUI treatment.

Scaffolds to control inflammation and facilitate dental pulp regeneration

In dentistry, the maintenance of a vital dental pulp is of paramount importance because teeth devitalized by root canal treatment may become more brittle and prone to structural failure over time. Advanced carious lesions can irreversibly damage the dental pulp by propagating a sustained inflammatory response throughout the tissue. Although the inflammatory response initially drives tissue repair, sustained inflammation has an enormously destructive effect on the vital pulp, eventually leading to total necrosis of the tissue and necessitating its removal. The implications of tooth devitalization have driven significant interest in the development of bioactive materials that facilitate the regeneration of damaged pulp tissues by harnessing the capacity of the dental pulp for self-repair. In considering the process by which pulpitis drives tissue destruction, it is clear that an important step in supporting the regeneration of pulpal tissues is the attenuation of inflammation. Macrophages, key mediators of the immune response, may play a critical role in the resolution of pulpitis because of their ability to switch to a proresolution phenotype. This process can be driven by the resolvins, a family of molecules derived from fatty acids that show great promise as therapeutic agents. In this review, we outline the importance of preserving the capacity of the dental pulp to self-repair through the rapid attenuation of inflammation. Potential treatment modalities, such as shifting macrophages to a proresolving phenotype with resolvins are described, and a range of materials known to support the regeneration of dental pulp are presented.

Synthesis and Controlled Release Behavior of Biodegradable Polymers with Pendant Ibuprofen Group

The continuous use of nonsteroidal anti-inflammatory drugs such as ibuprofen frequently leads to some serious side-effects including stomach ulcers and bleeding. In this paper, two kinds of new biocompatible polyesters (PIGB, PIGH) and polyester-amide (PIGA) comprising biodegradable components (L-glutamic acid,1,4-butanediol, and1,6-hexanediol and6-amino hexanol) and ibuprofen as pendant group have been prepared by the melting polycondensation. The chemical structures of the monomer and polymers are characterized by FTIR,1H NMR spectrum, GPC, and contact angle measurements. The drug loading of ibuprofen reaches very high level (35–37%) for PIGB, PIGH, and PIGA carriers. The free ibuprofen molecules are releasedin vitrofrom polymer carriers in a controlled manner without a burst release, different from the release pattern observed in the other drug-encapsulated systems. It is also found that the different hydrophilicity among PIGB, PIGH, and PIGA plays a key role in the time-controlled release of ibuprofen. In addition, the viability of HeLa cells after 48 h of incubation reaches more than 100%, indicating no cytotoxicity for PIGB, PIGH, and PIGA carriers.

Ibuprofen loaded PLA nanofibrous scaffolds increase proliferation of human skin cells in vitro and promote healing of full thickness incision wounds in vivo

This article presents successful incorporation of ibuprofen in polylactic acid (PLA) nanofibers to create scaffolds for the treatment of both acute and chronic wounds. Nanofibrous PLA scaffolds containing 10, 20, or 30 wt % ibuprofen were created and ibuprofen release profiles quantified. In vitro cytotoxicity to human epidermal keratinocytes (HEK) and human dermal fibroblasts (HDF) of the three scaffolds with varying ibuprofen concentrations were evaluated and compared to pure PLA nanofibrous scaffolds. Thereafter, scaffolds loaded with ibuprofen at the concentration that promoted human skin cell viability and proliferation (20 wt %) were evaluated in vivo in nude mice using a full thickness skin incision model to determine the ability of these scaffolds to promote skin regeneration and/or assist with scarless healing. Both acellular and HEK and HDF cell-seeded 20 wt % ibuprofen loaded nanofibrous bandages reduced wound contraction compared with wounds treated with Tegaderm™ and sterile gauze. Newly regenerated skin on wounds treated with cell-seeded 20 wt % ibuprofen bandages exhibited significantly greater blood vessel formation relative to acellular ibuprofen bandages. We have found that degradable anti-inflammatory scaffolds containing 20 wt % ibuprofen promote human skin cell viability and proliferation in vitro, reduce wound contraction in vivo, and when seeded with skin cells, also enhance new blood vessel formation. The approaches and results reported here hold promise for multiple skin tissue engineering and wound healing applications. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 327-339, 2017.

Supercritical fluid assisted process for the generation of cellulose acetate loaded structures, potentially useful for tissue engineering applications

Supercritical CO2 phase inversion offers an alternative to obtain solvent free structures with short processing times and preservation of the morphology. We prepared cellulose acetate structures loaded with drug (ibuprofen) to perform experiments at pressures and temperatures ranging between 150 and 250 bars and 35 and 55 °C. The structures were properly characterized by SEM, EDX and DSC; drug controlled release experiments were also performed. Analyses showed that the operating conditions strongly influenced the structure morphology, porosity and drug release profiles. Indeed, connected microparticles, nanofibrous networks and cellular membranes were produced, which have generated different drug release profiles.

Advanced Therapeutic Dressings for Effective Wound Healing--A Review

Advanced therapeutic dressings that take active part in wound healing to achieve rapid and complete healing of chronic wounds is of current research interest. There is a desire for novel strategies to achieve expeditious wound healing because of the enormous financial burden worldwide. This paper reviews the current state of wound healing and wound management products, with emphasis on the demand for more advanced forms of wound therapy and some of the current challenges and driving forces behind this demand. The paper reviews information mainly from peer-reviewed literature and other publicly available sources such as the US FDA. A major focus is the treatment of chronic wounds including amputations, diabetic and leg ulcers, pressure sores, and surgical and traumatic wounds (e.g., accidents and burns) where patient immunity is low and the risk of infections and complications are high. The main dressings include medicated moist dressings, tissue-engineered substitutes, biomaterials-based biological dressings, biological and naturally derived dressings, medicated sutures, and various combinations of the above classes. Finally, the review briefly discusses possible prospects of advanced wound healing including some of the emerging physical approaches such as hyperbaric oxygen, negative pressure wound therapy and laser wound healing, in routine clinical care.