Characterizing and predicting carboxylic acid reductase activity for diversifying bioaldehyde production

Development of a Thermodynamically Favorable Multi-enzyme Cascade Reaction for Efficient Sustainable Production of ω-Amino Fatty Acids and α,ω-Diamines

Aliphatic ω-amino fatty acids (ω-AFAs) and α,ω-diamines (α,ω-DMs) are essential monomers for the production of nylons. Development of a sustainable biosynthesis route for ω-AFAs and α,ω-DMs is crucial in addressing the challenges posed by climate change. Herein, we constructed an unprecedented thermodynamically favorable multi-enzyme cascade (TherFavMEC) for the efficient sustainable biosynthesis of ω-AFAs and α,ω-DMs from cheap α,ω-dicarboxylic acids (α,ω-DAs). This TherFavMEC was developed by incorporating bioretrosynthesis analysis tools, reaction Gibbs free energy calculations, thermodynamic equilibrium shift strategies and cofactor (NADPH&ATP) regeneration systems. The molar yield of 6-aminohexanoic acid (6-ACA) from adipic acid (AA) was 92.3 %, while the molar yield from 6-ACA to 1,6-hexanediamine (1,6-HMD) was 96.1 %, which were significantly higher than those of previously reported routes. Furthermore, the biosynthesis of ω-AFAs and α,ω-DMs from 20.0 mM α,ω-DAs (C6-C9) was also performed, giving 11.2 mM 1,6-HMD (56.0 % yield), 14.8 mM 1,7-heptanediamine (74.0 % yield), 17.4 mM 1,8-octanediamine (87.0 % yield), and 19.7 mM 1,9-nonanediamine (98.5 % yield), respectively. The titers of 1,9-nonanediamine, 1,8-octanediamine, 1,7-heptanediamine and 1,6-HMD were improved by 328-fold, 1740-fold, 87-fold and 3.8-fold compared to previous work. Therefore, this work holds great potential for the bioproduction of ω-AFAs and α,ω-DMs.

Design, Evaluation, and Implementation of Synthetic Isopentyldiol Pathways in Escherichia coli

Isopentyldiol (IPDO) is an important raw material in the cosmetic industry. So far, IPDO is exclusively produced through chemical synthesis. Growing interest in natural personal care products has inspired the quest to develop a biobased process. We previously reported a biosynthetic route that produces IPDO via extending the leucine catabolism (route A), the efficiency of which, however, is not satisfactory. To address this issue, we computationally designed a novel non-natural IPDO synthesis pathway (route B) using RetroPath RL, the state-of-the-art tool for bioretrosynthesis based on artificial intelligence methods. We compared this new pathway with route A and two other intuitively designed routes for IPDO biosynthesis from various perspectives. Route B, which exhibits the highest thermodynamic driving force, least non-native reaction steps, and lowest energy requirements, appeared to hold the greatest potential for IPDO production. All three newly designed routes were then implemented in the Escherichia coli BL21(DE3) strain. Results show that the computationally designed route B can produce 2.2 mg/L IPDO from glucose but no IPDO production from routes C and D. These results highlight the importance and usefulness of in silico design and comprehensive evaluation of the potential efficiencies of candidate pathways in constructing novel non-natural pathways for the production of biochemicals.

Carboxylic acid reductases: Structure, catalytic requirements, and applications in biotechnology

Biocatalysts have been gaining extra attention in recent decades due to their industrial-relevance properties, which may hasten the transition to a cleaner environment. Carboxylic acid reductases (CARs) are large, multi-domain proteins that can catalyze the reduction of carboxylic acids to corresponding aldehydes, with the presence of adenosine triphosphate (ATP) and nicotinamide adenine dinucleotide phosphate (NADPH). This biocatalytic reaction is of great interest due to the abundance of carboxylic acids in nature and the ability of CAR to convert carboxylic acids to a wide range of aldehydes essentially needed as end products such as vanillin or reaction intermediates for several compounds production such as alcohols, alkanes, and amines. This modular enzyme, found in bacteria and fungi, demands an activation via post-translational modification by the phosphopantetheinyl transferase (PPTase). Recent advances in the characterization and structural studies of CARs revealed valuable information about the enzymes' dynamics, mechanisms, and unique features. In this comprehensive review, we summarize the previous findings on the phylogeny, structural and mechanistic insight of the domains, post-translational modification requirement, strategies for the cofactors regeneration, the extensively broad aldehyde-related industrial application properties of CARs, as well as their recent immobilization approaches.

Systematic metabolic engineering of Escherichia coli for the enhanced production of cinnamaldehyde

Cinnamaldehyde (CAD) derived from cinnamon bark has received much attention for its potential as a nematicide and food additive. Previously, we have succeeded in developing an Escherichia coli strain (YHP05) capable of synthesizing cinnamaldehyde; however, the production titer (75 mg/L) was not sufficient for commercialization. Herein, to develop an economical and sustainable production bioprocess, we further engineered the YHP05 strain for non-auxotrophic, antibiotic-free, inducer-free hyperproduction of CAD using systematic metabolic engineering. First, the conversion of trans-cinnamic acid (t-CA) to CAD was improved by the co-expression of carboxylic acid reductase and phosphopantetheinyl transferase (PPTase) genes. Second, to prevent the spontaneous conversion of CAD to cinnamyl alcohol, 10 endogenous reductase and dehydrogenase genes were deleted. Third, all expression cassettes were integrated into the chromosomal DNA using an auto-inducible system for antibiotic- and inducer-free production. Subsequently, to facilitate CAD production, available pools of cofactors (NADPH, CoA, and ATP) were increased, and acetate pathways were deleted. With the final antibiotic-, plasmid-, and inducer-free strain (H-11MPmR), fed-batch cultivations combined with in situ product recovery (ISPR) were performed, and the production titer of CAD as high as 3.8 g/L could be achieved with 49.1 mg/L/h productivity, which is the highest CAD titer ever reported.

Biosynthesis of Pyrrole-2-carbaldehyde via Enzymatic CO2 Fixation

The use of CO2 as a chemical building block is of considerable interest. To achieve carbon fixation at ambient conditions, (de)carboxylase enzymes offer an attractive route but frequently require elevated [CO2] levels to yield the acid product. However, it has recently been shown that the coupling of a UbiD-type decarboxylase with carboxylic acid reductase yields the corresponding aldehyde product at near ambient [CO2]. Here, we show this approach can be expanded to different UbiD and CAR enzymes to yield alternative products, in this case, the production of pyrrole-2-carbaldehyde from pyrrole, using Pseudomonas aeruginosa HudA/PA0254 in combination with Segniliparus rotundus CAR. This confirms the varied substrate range of the respective UbiD and CAR enzymes can be harnessed in distinct combinations to support production of a wide range of aldehydes via enzymatic CO2 fixation.

Rational hinge engineering of carboxylic acid reductase from Mycobacterium smegmatis enhances its catalytic efficiency in biocatalysis

BACKGROUND

Carboxylic acid reductases (CARs) represent useful tools for the production of aldehydes from ubiquitous organic carboxylic acids. However, the low catalytic efficiency of these enzymes hampers their application.

METHODS

Herein, a CAR originating from Mycobacterium smegmatis was redesigned through rational hinge engineering to enhance the catalytic efficiency.

RESULTS

Based on the unique domain architecture of CARs and their superfamily, a mutagenesis library of the hinge region was designed. The best mutant R505I/N506K showed a 6.57-fold improved catalytic efficiency. Molecular dynamics simulations showed the increased catalytic efficiency was due to the strong binding of the acyl-AMP complex with it. Meanwhile, the ε-nitrogen atom of Lys610 frequently interacted with the ribose-ring oxygen atom of the complex, the distance (d1) between them represents a great indicator for that. The d1 value was used as a nimble indicator to evaluate unexplored mutants of that region for enhanced activity by in silico mutational experiments. Overall, eight mutants were identified to show higher enhanced activity compared with wild-type enzyme and R505F/N506G showed the highest catalytic efficiency.

CONCLUSION

Altogether, the two-step strategy used here provided useful references for the engineering of CARs and other similar multiple-domain enzymes.

Computationally Prospecting Potential Pathways from Lignin Monomers and Dimers toward Aromatic Compounds

The heterogeneity of the aromatic products originating from lignin catalytic depolymerization remains one of the major challenges associated with lignin valorization. Microbes have evolved catabolic pathways that can funnel heterogeneous intermediates to a few central aromatic products. These aromatic compounds can subsequently undergo intra- or extradiol ring opening to produce value-added chemicals. However, such funneling pathways are only partially characterized for a few organisms such as Sphingobium sp. SYK-6 and Pseudomonas putida KT2440. Herein, we apply the de novo pathway design tool (novoStoic) to computationally prospect possible ways of funneling lignin-derived mono- and biaryls. novoStoic employs reaction rules between molecular moieties to hypothesize de novo conversions by flagging known enzymes that carry out the same biotransformation on the most similar substrate. Both reaction rules and known reactions are then deployed by novoStoic to identify a mass-balanced biochemical network that converts a source to a target metabolite while minimizing the number of de novo steps. We demonstrate the application of novoStoic for (i) designing alternative pathways of funneling S, G, and H lignin monomers, and (ii) exploring cleavage pathways of β-1 and β-β dimers. By exploring the uncharted chemical space afforded by enzyme promiscuity, novoStoic can help predict previously unknown native pathways leveraging enzyme promiscuity and propose new carbon/energy efficient lignin funneling pathways with few heterologous enzymes.

Production of Aldehydes by Biocatalysis

The production of aldehydes, highly reactive and toxic chemicals, brings specific challenges to biocatalytic processes. Absence of natural accumulation of aldehydes in microorganisms has led to a combination of in vitro and in vivo strategies for both, bulk and fine production. Advances in genetic and metabolic engineering and implementation of computational techniques led to the production of various enzymes with special requirements. Cofactor synthesis, post-translational modifications and structure engineering are applied to prepare active enzymes for one-step or cascade reactions. This review presents the highlights in biocatalytical production of aldehydes with the potential to shape future industrial applications.

Engineering Carboxylic Acid Reductase (CAR) through a Whole-Cell Growth-Coupled NADPH Recycling Strategy

Rapid evolution of enzyme activities is often hindered by the lack of efficient and affordable methods to identify beneficial mutants. We report the development of a new growth-coupled selection method for evolving NADPH-consuming enzymes based on the recycling of this redox cofactor. The method relies on a genetically modified Escherichia coli strain, which overaccumulates NADPH. This method was applied to the engineering of a carboxylic acid reductase (CAR) for improved catalytic activities on 2-methoxybenzoate and adipate. Mutant enzymes with up to 17-fold improvement in catalytic efficiency were identified from single-site saturated mutagenesis libraries. Obtained mutants were successfully applied to whole-cell conversions of adipate into 1,6-hexanediol, a C₆ monomer commonly used in polymer industry.

In Situ Acetaldehyde Synthesis for Carboligation Reactions

The enzyme 4-oxalocrotonate tautomerase (4-OT) can promiscuously catalyze various carboligation reactions using acetaldehyde as a nucleophile. However, the highly reactive nature of acetaldehyde requires intricate handling, which can impede its usage in practical synthesis. Therefore, we investigated three enzymatic routes to synthesize acetaldehyde in situ in one-pot cascade reactions with 4-OT. Two routes afforded practical acetaldehyde concentrations, using an environmental pollutant, trans-3-chloroacrylic acid, or a bio-renewable, ethanol, as starting substrate. These routes can be combined with 4-OT catalyzed Michael-type additions and aldol condensations in one pot. This modular systems biocatalysis methodology provides a stepping stone towards the development of larger artificial metabolic networks for the practical synthesis of important chemical synthons.

Metagenomic analysis exploring microbial assemblages and functional genes potentially involved in di (2-ethylhexyl) phthalate degradation in soil

Widespread use of di (2-ethylhexyl) phthalate (DEHP) as a plasticizer has caused considerable soil pollution; however, little is known about indigenous microbial communities involved in its degradation in soil. In this study, metagenomic sequencing combined with metabolite determination was used to explore microorganisms and genes potentially involved in DEHP degradation in aerobic and anaerobic soils. The results showed that under both dryland aerobic and flooded anaerobic conditions, DEHP was initially hydrolyzed into mono (2-ethylhexyl) phthalate which was then hydrolyzed into phthalic acid; benzoic acid was the central intermediate during further metabolism steps. Bacteria were more responsive to DEHP presence than fungi/archaea, and potential degradative genes stimulated by DEHP were predominantly associated with bacteria, reflecting the dominant role of bacteria in DEHP degradation. Members of the Actinomycetales seemed to be the dominant degraders under aerobic conditions, while a number of phyla i.e. Gemmatimonadetes, Proteobacteria, Acidobacteria and Bacteroidetes appeared to be involved under anaerobic conditions. Interestingly, ~50% of esterase/lipase/cytochrome P450 genes enriched by DEHP under aerobic conditions were from Nocardioides, a bacterial genus that has not been previously directly linked to phthalate ester degradation. The results indicate that novel degraders may play an important role in DEHP degradation in natural soil environments. This study provides a better understanding of the phthalate ester biodegradation processes occurring in soil.

A functionally-distinct carboxylic acid reductase PcCAR4 unearthed from a repertoire of type IV CARs in the white-rot fungus Pycnoporus cinnabarinus

Carboxylic acid reductases (CARs) are attracting burgeoning attention as biocatalysts for organic synthesis of aldehydes and their follow-up products from economic carboxylic acid precursors. The CAR enzyme class as a whole, however, is still poorly understood. To date, relatively few CAR sequences have been reported, especially from fungal sources. Here, we sought to increase the diversity of the CAR enzyme class. Six new CAR sequences from the white-rot fungus Pycnoporus cinnabarinus were identified from genome-wide mining. Genome and gene clustering analysis suggests that these PcCAR enzymes play different natural roles in Basidiomycete systems, compared to their type II Ascomycete counterparts. The cDNA sequences of all six Pccar genes were deduced and analysis of their corresponding amino acid sequence showed that they encode for proteins of similar properties that possess a conserved modular functional tri-domain arrangement. Phylogenetic analyses showed that all PcCAR enzymes cluster together with the other type IV CARs. One candidate, PcCAR4, was cloned and over-expressed recombinantly in Escherichia coli. Subsequent biotransformation-based screening with a panel of structurally-diverse carboxylic acid substrates suggest that PcCAR4 possessed a more pronounced substrate specificity compared to previously reported CARs, preferring to reduce sterically-rigid carboxylic acids such as benzoic acid. These findings thus present a new functionally-distinct member of the CAR enzyme class.

Highly thermostable carboxylic acid reductases generated by ancestral sequence reconstruction

Carboxylic acid reductases (CARs) are biocatalysts of industrial importance. Their properties, especially their poor stability, render them sub-optimal for use in a bioindustrial pipeline. Here, we employed ancestral sequence reconstruction (ASR) - a burgeoning engineering tool that can identify stabilizing but enzymatically neutral mutations throughout a protein. We used a three-algorithm approach to reconstruct functional ancestors of the Mycobacterial and Nocardial CAR1 orthologues. Ancestral CARs (AncCARs) were confirmed to be CAR enzymes with a preference for aromatic carboxylic acids. Ancestors also showed varied tolerances to solvents, pH and in vivo-like salt concentrations. Compared to well-studied extant CARs, AncCARs had a Tm up to 35 °C higher, with half-lives up to nine times longer than the greatest previously observed. Using ancestral reconstruction we have expanded the existing CAR toolbox with three new thermostable CAR enzymes, providing access to the high temperature biosynthesis of aldehydes to drive new applications in biocatalysis.

A pathway for every product? Tools to discover and design plant metabolism

The vast diversity of plant natural products is a powerful indication of the biosynthetic capacity of plant metabolism. Synthetic biology seeks to capitalize on this ability by understanding and reconfiguring the biosynthetic pathways that generate this diversity to produce novel products with improved efficiency. Here we review the algorithms and databases that presently support the design and manipulation of metabolic pathways in plants, starting from metabolic models of native biosynthetic pathways, progressing to novel combinations of known reactions, and finally proposing new reactions that may be carried out by existing enzymes. We show how these tools are useful for proposing new pathways as well as identifying side reactions that may affect engineering goals.

An engineered fatty acid synthase combined with a carboxylic acid reductase enables de novo production of 1-octanol in Saccharomyces cerevisiae

BACKGROUND

The ideal biofuel should not only be a regenerative fuel from renewable feedstocks, but should also be compatible with the existing fuel distribution infrastructure and with normal car engines. As the so-called drop-in biofuel, the fatty alcohol 1-octanol has been described as a valuable substitute for diesel and jet fuels and has already been produced fermentatively from sugars in small amounts with engineered bacteria via reduction of thioesterase-mediated premature release of octanoic acid from fatty acid synthase or via a reversal of the β-oxidation pathway.

RESULTS

The previously engineered short-chain acyl-CoA producing yeast Fas1R1834K/Fas2 fatty acid synthase variant was expressed together with carboxylic acid reductase from Mycobacterium marinum and phosphopantetheinyl transferase Sfp from Bacillus subtilis in a Saccharomyces cerevisiae Δfas1 Δfas2 Δfaa2 mutant strain. With the involvement of endogenous thioesterases, alcohol dehydrogenases, and aldehyde reductases, the synthesized octanoyl-CoA was converted to 1-octanol up to a titer of 26.0 mg L-1 in a 72-h fermentation. The additional accumulation of 90 mg L-1 octanoic acid in the medium indicated a bottleneck in 1-octanol production. When octanoic acid was supplied externally to the yeast cells, it could be efficiently converted to 1-octanol indicating that re-uptake of octanoic acid across the plasma membrane is not limiting. Additional overexpression of aldehyde reductase Ahr from Escherichia coli nearly completely prevented accumulation of octanoic acid and increased 1-octanol titers up to 49.5 mg L-1. However, in growth tests concentrations even lower than 50.0 mg L-1 turned out to be inhibitory to yeast growth. In situ extraction in a two-phase fermentation with dodecane as second phase did not improve growth, indicating that 1-octanol acts inhibitive before secretion. Furthermore, 1-octanol production was even reduced, which results from extraction of the intermediate octanoic acid to the organic phase, preventing its re-uptake.

CONCLUSIONS

By providing chain length control via an engineered octanoyl-CoA producing fatty acid synthase, we were able to specifically produce 1-octanol with S. cerevisiae. Before metabolic engineering can be used to further increase product titers and yields, strategies must be developed that cope with the toxic effects of 1-octanol on the yeast cells.

Identification of Key Residues for Enzymatic Carboxylate Reduction

Carboxylate reductases (CARs, E.C. 1.2.1.30) generate aldehydes from their corresponding carboxylic acid with high selectivity. Little is known about the structure of CARs and their catalytically important amino acid residues. The identification of key residues for carboxylate reduction provides a starting point to gain deeper understanding of enzymatic carboxylate reduction. A multiple sequence alignment of CARs with confirmed activity recently identified in our lab and from the literature revealed a fingerprint of conserved amino acids. We studied the function of conserved residues by multiple sequence alignments and mutational replacements of these residues. In this study, single-site alanine variants of Neurospora crassa CAR were investigated to determine the contribution of conserved residues to the function, expressability or stability of the enzyme. The effect of amino acid replacements was investigated by analyzing enzymatic activity of the variants in vivo and in vitro. Supported by molecular modeling, we interpreted that five of these residues are essential for catalytic activity, or substrate and co-substrate binding. We identified amino acid residues having significant impact on CAR activity. Replacement of His 237, Glu 433, Ser 595, Tyr 844, and Lys 848 by Ala abolish CAR activity, indicating their key role in acid reduction. These results may assist in the functional annotation of CAR coding genes in genomic databases. While some other conserved residues decreased activity or had no significant impact, four residues increased the specific activity of NcCAR variants when replaced by alanine. Finally, we showed that NcCAR wild-type and mutants efficiently reduce aliphatic acids.

Carboxylic acid reductase enzymes (CARs)

Carboxylate reductases (CARs) are emerging as valuable catalysts for the selective one-step reduction of carboxylic acids to their corresponding aldehydes. The substrate scope of CARs is exceptionally broad and offers potential for their application in diverse synthetic processes. Two major fields of application are the preparation of aldehydes as end products for the flavor and fragrance sector and the integration of CARs in cascade reactions with aldehydes as the key intermediates. The latest applications of CARs are dominated by in vivo cascades and chemo-enzymatic reaction sequences. The challenge to fully exploit product selectivity is discussed. Recent developments in the characterization of CARs are summarized, with a focus on aspects related to the domain architecture and protein sequences of CAR enzymes.

Predicting novel substrates for enzymes with minimal experimental effort with active learning

Enzymatic substrate promiscuity is more ubiquitous than previously thought, with significant consequences for understanding metabolism and its application to biocatalysis. This realization has given rise to the need for efficient characterization of enzyme promiscuity. Enzyme promiscuity is currently characterized with a limited number of human-selected compounds that may not be representative of the enzyme's versatility. While testing large numbers of compounds may be impractical, computational approaches can exploit existing data to determine the most informative substrates to test next, thereby more thoroughly exploring an enzyme's versatility. To demonstrate this, we used existing studies and tested compounds for four different enzymes, developed support vector machine (SVM) models using these datasets, and selected additional compounds for experiments using an active learning approach. SVMs trained on a chemically diverse set of compounds were discovered to achieve maximum accuracies of ~80% using ~33% fewer compounds than datasets based on all compounds tested in existing studies. Active learning-selected compounds for testing resolved apparent conflicts in the existing training data, while adding diversity to the dataset. The application of these algorithms to wide arrays of metabolic enzymes would result in a library of SVMs that can predict high-probability promiscuous enzymatic reactions and could prove a valuable resource for the design of novel metabolic pathways.

Exploring Bacterial Carboxylate Reductases for the Reduction of Bifunctional Carboxylic Acids

Carboxylic acid reductases (CARs) selectively reduce carboxylic acids to aldehydes using ATP and NADPH as cofactors under mild conditions. Although CARs attracts significant interest, only a few enzymes have been characterized to date, whereas the vast majority of CARs have yet to be examined. Herein the authors report that 12 bacterial CARs reduces a broad range of bifunctional carboxylic acids containing oxo-, hydroxy-, amino-, or second carboxyl groups with several enzymes showing activity toward 4-hydroxybutanoic (4-HB) and adipic acids. These CARs exhibits significant reductase activity against substrates whose second functional group is separated from the carboxylate by at least three carbons with both carboxylate groups being reduced in dicarboxylic acids. Purified CARs supplemented with cofactor regenerating systems (for ATP and NADPH), an inorganic pyrophosphatase, and an aldo-keto reductase catalyzes a high conversion (50-76%) of 4-HB to 1,4-butanediol (1,4-BDO) and adipic acid to 1,6-hexanediol (1,6-HDO). Likewise, Escherichia coli strains expressing eight different CARs efficiently reduces 4-HB to 1,4-BDO with 50-95% conversion, whereas adipic acid is reduced to a mixture of 6-hydroxyhexanoic acid (6-HHA) and 1,6-HDO. Thus, our results illustrate the broad biochemical diversity of bacterial CARs and their compatibility with other enzymes for applications in biocatalysis.

Production of (S)-2-aminobutyric acid and (S)-2-aminobutanol in Saccharomyces cerevisiae

Background

Saccharomyces cerevisiae (baker’s yeast) has great potential as a whole-cell biocatalyst for multistep synthesis of various organic molecules. To date, however, few examples exist in the literature of the successful biosynthetic production of chemical compounds, in yeast, that do not exist in nature. Considering that more than 30% of all drugs on the market are purely chemical compounds, often produced by harsh synthetic chemistry or with very low yields, novel and environmentally sound production routes are highly desirable. Here, we explore the biosynthetic production of enantiomeric precursors of the anti-tuberculosis and anti-epilepsy drugs ethambutol, brivaracetam, and levetiracetam. To this end, we have generated heterologous biosynthetic pathways leading to the production of (S)-2-aminobutyric acid (ABA) and (S)-2-aminobutanol in baker’s yeast.

Results

We first designed a two-step heterologous pathway, starting with the endogenous amino acid l-threonine and leading to the production of enantiopure (S)-2-aminobutyric acid. The combination of Bacillus subtilis threonine deaminase and a mutated Escherichia coli glutamate dehydrogenase resulted in the intracellular accumulation of 0.40 mg/L of (S)-2-aminobutyric acid. The combination of a threonine deaminase from Solanum lycopersicum (tomato) with two copies of mutated glutamate dehydrogenase from E. coli resulted in the accumulation of comparable amounts of (S)-2-aminobutyric acid. Additional l-threonine feeding elevated (S)-2-aminobutyric acid production to more than 1.70 mg/L. Removing feedback inhibition of aspartate kinase HOM3, an enzyme involved in threonine biosynthesis in yeast, elevated (S)-2-aminobutyric acid biosynthesis to above 0.49 mg/L in cultures not receiving additional l-threonine. We ultimately extended the pathway from (S)-2-aminobutyric acid to (S)-2-aminobutanol by introducing two reductases and a phosphopantetheinyl transferase. The engineered strains produced up to 1.10 mg/L (S)-2-aminobutanol.

Conclusions

Our results demonstrate the biosynthesis of (S)-2-aminobutyric acid and (S)-2-aminobutanol in yeast. To our knowledge this is the first time that the purely synthetic compound (S)-2-aminobutanol has been produced in vivo. This work paves the way to greener and more sustainable production of chemical entities hitherto inaccessible to synthetic biology.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-017-0667-z) contains supplementary material, which is available to authorized users.

Characterization of Carboxylic Acid Reductases as Enzymes in the Toolbox for Synthetic Chemistry

Carboxylic acid reductase enzymes (CARs) meet the demand in synthetic chemistry for a green and regiospecific route to aldehydes from their respective carboxylic acids. However, relatively few of these enzymes have been characterized. A sequence alignment with members of the ANL (Acyl‐CoA synthetase/ NRPS adenylation domain/Luciferase) superfamily of enzymes shed light on CAR functional dynamics. Four unstudied enzymes were selected by using a phylogenetic analysis of known and hypothetical CARs, and for the first time, a thorough biochemical characterization was performed. Kinetic analysis of these enzymes with various substrates shows that they have a broad but similar substrate specificity. Electron‐rich acids are favored, which suggests that the first step in the proposed reaction mechanism, attack by the carboxylate on the α‐phosphate of adenosine triphosphate (ATP), is the step that determines the substrate specificity and reaction kinetics. The effects of pH and temperature provide a clear operational window for the use of these CARs, whereas an investigation of product inhibition by NADP⁺, adenosine monophosphate, and pyrophosphate indicates that the binding of substrates at the adenylation domain is ordered with ATP binding first. This study consolidates CARs as important and exciting enzymes in the toolbox for sustainable chemistry and provides specifications for their use as a biocatalyst.

Selective Enzymatic Transformation to Aldehydes in vivo by Fungal Carboxylate Reductase from Neurospora crassa

The enzymatic reduction of carboxylic acids is in its infancy with only a handful of biocatalysts available to this end. We have increased the spectrum of carboxylate‐reducing enzymes (CARs) with the sequence of a fungal CAR from Neurospora crassa OR74A (NcCAR). NcCAR was efficiently expressed in E. coli using an autoinduction protocol at low temperature. It was purified and characterized in vitro, revealing a broad substrate acceptance, a pH optimum at pH 5.5–6.0, a T_m of 45 °C and inhibition by the co‐product pyrophosphate which can be alleviated by the addition of pyrophosphatase. The synthetic utility of NcCAR was demonstrated in a whole‐cell biotransformation using the Escherichia coli K‐12 MG1655 RARE strain in order to suppress overreduction to undesired alcohol. The fragrance compound piperonal was prepared from piperonylic acid (30 mM) on gram scale in 92 % isolated yield in >98% purity. This corresponds to a productivity of 1.5 g/L/h.