Immobilization of Cyclooxygenase-2 on Silica Gel Microspheres: Optimization and Characterization

In this study, immobilized COX-2 was successfully constructed through glutaraldehyde-mediated covalent coupling on functional silica gel microspheres. The optimum conditions, properties, and morphological characteristics of the immobilized COX-2 were investigated. The optimal immobilization process was as follows: about 0.02 g of aminated silica gel microspheres was activated by 0.25% GA solution for 6 h and mixed with 5 U of free recombinant COX-2 solution. Then, the mixture was shaken for 8 h at 20 °C. Results showed that the immobilized COX-2 produced by this method exhibited excellent biocatalytic activity, equivalent to that of free COX-2 under the test conditions employed. The best biocatalytic activity of immobilized COX-2 appeared at pH 8.0 and still maintained at about 84% (RSD < 7.39%, n = 3) at pH 10.0. For temperature tolerance, immobilized COX-2 exhibited its maximum biocatalytic activity at 40 °C and about 68% (RSD < 6.99%, n = 3) of the activity was maintained at 60 °C. The immobilized COX-2 retained over 85% (RSD < 7.26%, n = 3) of its initial biocatalytic activity after five cycles, and after 10 days storage, the catalytic activity of immobilized COX-2 still maintained at about 95% (RSD < 3.08%, n = 3). These characteristics ensured the convenient use of the immobilized COX-2 and reduced its production cost.

A GPIIb/IIIa bioreactor for specific treatment of immune thrombocytopenic purpura, an autoimmune disease. Preparation, in vitro characterization, and preliminary proof-of-concept animal studies

Immune thrombocytopenic purpura (ITP) is an autoimmune disease that affects thousands of Americans each year. The resulting thrombocytopenia, which develops from destruction of platelets (PLT) by anti-PLT autoantibodies (APAb), is often associated with hemorrhagic complications. Existing therapies are not effective and are associated with significant morbidity. Recently, a new treatment modality using plasmapheresis with a Protein-A column has shown some clinical promise. Yet, although this method would remove the pathogenic APAb, it would also deplete protective antibodies, thereby weakening the body's self-defense system. Because about 80% of patients with ITP develop APAb against the GPIIb/IIIa antigens on PLT, a novel approach of attaching a GPIIb/IIIa-linked bioreactor with an extracorporeal circuit is suggested herein to achieve highly effective/specific APAb removal and overcome shortcomings of plasmapheresis in treating ITP. A hollow fiber-based bioreactor device was fabricated, and GPIIb/IIIa antigens were immobilized onto the inner lumens of the hollow fibers by using the epichlorohydrin activation method. An optimized bioreactor containing a loading of 1.63 mg GPIIb/IIIa/g fibers and adsorption capacity of 1.9 mg 7E3/g fibers was developed. Preliminary proof-of-concept investigation using a 7E3-induced thrombocytopenic rat model (which mimicked clinical ITP) was carried out. A complete (100%) return of PLT counts to their initial levels was observed in rats within 6 h after the GPIIb/IIIa bioreactor treatment. In addition, a rapid restoration of WBC counts in the treated rats was also found. These preliminary findings shed light of promise of using the GPIIb/IIIa bioreactor approach in achieving highly improved ITP therapy.

Latex particles with thermo-flocculation and magnetic properties for immobilization of alpha-chymotrypsin

Core-shell-type latex particles composed of styrene, N-isopropylacrylamide (NIPAAm), and N-acryloxysuccinimide (NAS) were synthesized by surfactant-free emulsion polymerization. The latex particles show thermo-flocculation behavior due to the presence of temperature-sensitive monomer NIPAAm and could be used for immobilization of alpha-chymotrypsin through covalent bonding with the reactive ester groups of NAS. Enzyme recycle could be accomplished in this immobilized enzyme system by sedimentation of the thermo-flocculated latex particles in 20 min at 30 degrees C by raising the salt (NaCl) concentration to 0.5 M. To further enhance the sedimentation rate, ultrafine magnetite particles were prepared and included during polymerization to produce magnetic temperature-sensitive latex particles (MTLP), which could be recovered 6 times faster after thermo-flocculation by applying a low magnetic field. However, a higher salt concentration was necessary to flocculate the MTLP under the same condition as a result of its increased surface hydrophilicity, which originates from different polymerization conditions and the incorporation of magnetite. The immobilized enzyme shows high activity even against macromolecular substrates (hemoglobin and casein) owing to limited diffusion resistance, with full activity retention for nonmagnetic latex but one-half reduction in activity if the magnetic property was introduced. Optimal enzyme immobilization pH and enzyme loading were determined, and properties of the immobilized enzyme were characterized. The immobilized enzyme was used in 10 repeated batch hydrolyses of casein with successive flocculation/dispersion cycles and showed less than 15% activity decrease at the end. Overall, introducing the magnetic property to the latex could effectively enhance the solid-liquid separation rate after thermo-flocculation and maintain enzyme activity after repeated use but adversely influence the activity of the immobilized enzyme.

The green fluorescent protein is a versatile reporter for bioprocess monitoring

The green fluorescent protein (GFP) of Aequorea victoria has become a convenient and versatile tool as a reporter protein in molecular cell biology and developmental biology. Here, it is shown that GFP may advantageously be used as a reporter system for bioprocess monitoring as well. Examples are given for monitoring fermentation as well as downstream processes for protein recovery. Thus, separation processes based on the application of affinity-fusion tags may be optimized in terms of the operational conditions by using GFP as a model target protein owing to facile screening by simple visual inspection. This item is discussed together with the presentation of a novel fusion tag with strong affinity for metal-chelate ligands: hisactophilin, a histidine-rich protein of Dictyostelium discoideum. This tag is of particular interest for affinity separation processes requiring multiple sites of interaction like aqueous and reverse micellar two-phase extraction as well as precipitation.