Advances in hyaluronic acid production: Biosynthesis and genetic engineering strategies based on Streptococcus - A review

Hyaluronic acid (HA), which is a highly versatile glycosaminoglycan, is widely applied across the fields of food, cosmetics, and pharmaceuticals. It is primary produced through Streptococcus fermentation, but the product presents inherent challenges concerning consistency and potential pathogenicity. However, recent strides in molecular biology have paved the way for genetic engineering, which facilitates the creation of high-yield, nonpathogenic strains adept at synthesizing HA with specific molecular weights. This comprehensive review extensively explores the molecular biology underpinning pivotal HA synthase genes, which elucidates the intricate mechanisms governing HA synthesis. Moreover, it delineates various strategies employed in engineering HA-producing strains.

Improvement of Biosynthetic Ansamitocin P-3 Production Based on Oxygen-Vector Screening and Metabonomics Analysis

A novel approach involving exogenous oxygen vectors was developed for improving the production of biosynthetic Ansamitocin P-3 (AP-3). Four types of oxygen vectors including soybean oil, n-dodecane, n-hexadecane, and Tween-80 were applied to explore the effect of exogenous oxygen vectors on AP-3 yield. It was observed that soybean oil exhibited a better ability for promoting AP-3 generation than the other three oxygen vectors. Based on the results of the single-factor experiment, response surface methodology was employed to obtain the optimal soybean oil addition method. The optimum soybean oil concentration was 0.52%, and the addition time was 50 h. Under this condition, the yield of AP-3 reached 106.04 mg/L, which was 49.48% higher than that of the control group without adding oxygen vectors. To further investigate the influence of dissolved oxygen on precious orange tufts actinomycetes variety A. pretiosum strain metabolism and AP-3 yield, metabolomics analysis was carried out by detecting strain intermediate metabolites at various stages under different dissolved oxygen levels. Moreover, differential metabolite screening and metabolic pathway enrichment analysis were combined to exploit the effect mechanism of soybean oil on AP-3 production. Results suggested that primary metabolic levels of the TCA cycle and amino acid metabolism increased with the increase in dissolved oxygen level, which was beneficial to the life activities of bacteria and the synthesis of secondary metabolic precursors, thus increasing the production of AP-3.

Collagen- and hyaluronic acid-based hydrogels and their biomedical applications

Hydrogels have been widely investigated in biomedical fields due to their similar physical and biochemical properties to the extracellular matrix (ECM). Collagen and hyaluronic acid (HA) are the main components of the ECM in many tissues. As a result, hydrogels prepared from collagen and HA hold inherent advantages in mimicking the structure and function of the native ECM. Numerous studies have focused on the development of collagen and HA hydrogels and their biomedical applications. In this extensive review, we provide a summary and analysis of the sources, features, and modifications of collagen and HA. Specifically, we highlight the fabrication, properties, and potential biomedical applications as well as promising commercialization of hydrogels based on these two natural polymers.

Genetic strategies for improving hyaluronic acid production in recombinant bacterial culture

Hyaluronic acid (HA) is a biopolymer of repeating units of glucuronic acid and N-acetylglucosamine. Its market was valued at USD 8.9 billion in 2019. Traditionally, HA has been obtained from rooster comb-like animal tissues and fermentative cultures of attenuated pathogenic streptococci. Various attempts have been made to engineer a safe micro-organism for HA synthesis; however, the HA titres obtained from these attempts are in general still lower than those achieved by natural, pathogenic producers. In this scenario, ways to increase HA molecule length and titres in already constructed strains are gaining attention in the last years, but no recent publication has reviewed the main genetic strategies applied to improve HA production on heterologous hosts. In light of that, we hereby compile the advances made in the engineering of micro-organisms to improve HA synthesis.

Temperature-controlled molecular weight of hyaluronic acid produced by engineered Bacillus subtilis

To produce high-, medium- and low-molecular-weight hyaluronic acid (HA) at different temperatures using engineered Bacillus subtilis expressing hyaluronidase (HAase) from leech. By overexpressing the HAase gene hya in the HA-producing strain WmB using temperature-sensitive plasmid pKSV7, the engineered strain WmB-PYh produced HA with different molecular weights (8.61 kDa at 32 °C, 0.615 MDa at 42 °C, and 6.19 MDa at 47 °C). In this study, the molecular weight of HA was regulated by using leech HAase expressed from a temperature-sensitive plasmid. We thus obtained different molecular weight HAs by using a single bacterial strain at different culture temperatures.

Eliminating the capsule-like layer to promote glucose uptake for hyaluronan production by engineered Corynebacterium glutamicum

Hyaluronan is widely used in cosmetics and pharmaceutics. Development of robust and safe cell factories and cultivation approaches to efficiently produce hyaluronan is of many interests. Here, we describe the metabolic engineering of Corynebacterium glutamicum and application of a fermentation strategy to manufacture hyaluronan with different molecular weights. C. glutamicum is engineered by combinatorial overexpression of type I hyaluronan synthase, enzymes of intermediate metabolic pathways and attenuation of extracellular polysaccharide biosynthesis. The engineered strain produces 34.2 g L⁻¹ hyaluronan in fed-batch cultures. We find secreted hyaluronan encapsulates C. glutamicum, changes its cell morphology and inhibits metabolism. Disruption of the encapsulation with leech hyaluronidase restores metabolism and leads to hyper hyaluronan productions of 74.1 g L⁻¹. Meanwhile, the molecular weight of hyaluronan is also highly tunable. These results demonstrate combinatorial optimization of cell factories and the extracellular environment is efficacious and likely applicable for the production of other biopolymers.

Bioproduction of hyaluronan needs increases in yield and greater diversity of the molecular weights. Here, the author increases hyaluronan production and diversifies the molecular weights through engineering the hyaluronan biosynthesis pathway and disruption of Corynebacterium glutamicum encapsulation caused by secreted hyaluronan.

Deciphering the role of dissolved oxygen and N-acetyl glucosamine in governing higher molecular weight hyaluronic acid synthesis in Streptococcus zooepidemicus cell factory

The present study is focused on systematic process and kinetic investigation of hyaluronic acid (HA) production strategy unraveling the role of dissolved oxygen (DO) and N-acetyl glucosamine (GlcNAc) towards the enhancement of HA titer and its molecular weight. Maintaining excess DO levels (10-40% DO) through DO-stat control and the substitution of GlcNAc at a range (5-20 g/L) with glucose (Glc) critically influenced HA production. DO-stat control strategy yielded a promising HA titer (2.4 g/L) at 40% DO concentration. Controlling DO level at 20% (DO-stat) was observed to be optimum resulting in a significant HA production (2.1 g/L) and its molecular weight ranging 0.98-1.45 MDa with a consistent polydispersity index (PDI) (1.57-1.69). Substitution of GlcNAc with Glc at different proportions explicitly addressed the metabolic trade-off between HA titer and its molecular weight. GlcNAc substitution positively influenced the molecular weight of HA. The highest HA molecular weight (2.53 MDa) of two-fold increase compared with glucose as sole carbon substrate and narrower PDI (1.35 ± 0.18) was achieved for the 10:20 (Glc:GlcNAc) proportion. A novice attempt on modeling the uptake of dual substrates (Glc and GlcNAc) by Streptococcus zooepidemicus for HA production was successfully accomplished using double Andrew's growth model and the kinetic parameters were estimated reliably.

Amphiphilic Fluorine-Containing Block Copolymers as Carriers for Hydrophobic PtTFPP for Dissolved Oxygen Sensing, Cell Respiration Monitoring and In Vivo Hypoxia Imaging with High Quantum Efficiency and Long Lifetime

New amphiphilic star or multi-arm block copolymers with different structures were synthesized for enabling the use of hydrophobic oxygen probe of platinum (II)-tetrakis (pentafluorophenyl) porphyrin (PtTFPP) for bioanalysis. The amphiphilic star polymers were prepared through the Atom Transfer Radical Polymerization (ATRP) method by using hydrophilic 4-arm polyethylene glycol (4-arm-PEG) as an initiator. Among the five block copolymers, P1 series (P1a, P1b, and P1c) and P3 possess fluorine-containing moieties to improve the oxygen sensitivity with its excellent capacity to dissolve and carry oxygen. A polymer P2 without fluorine units was also synthesized for comparison. The structure-property relationship was investigated. Under nitrogen atmosphere, high quantum efficiency of PtTFPP in fluorine-containing micelles could reach to 22% and long lifetime could reach to 76 μs. One kind of representative PtTFPP-containing micelles was used to detect the respiration of Escherichia coli (E. coli) JM109 and macrophage cell J774A.1 by a high throughput plate reader. In vivo hypoxic imaging of tumor-bearing mice was also achieved successfully. This study demonstrated that using well-designed fluoropolymers to load PtTFPP could achieve high oxygen sensing properties, and long lifetime, showing the great capability for further in vivo sensing and imaging.