Three-dimensional spherical gelatin bubble-based scaffold improves the myotube formation of H9c2 myoblasts

Optimization of H9c2 differentiation leads to calcium-active and striated cardiac cells without addition of retinoic acid

As a reliable alternative to animal testing in cardiovascular research, it is crucial to improve differentiation of immortalized cell lines. In this study, we focused on optimizing the differentiation efficiency of the H9c2 cell line into cardiomyocytes using a high-throughput, automated image processing approach. While previous studies used protocols involving retinoic acid to enhance cardiac differentiation, we applied a simplified medium composition that results in higher differentiation rates. Along that line, we differentiated H9c2 cells into cardiomyocytes, which not only showed sarcomere-characteristic striation but also periodic intracellular calcium signaling for the first time. As a second step, we examined the potential application of polyacrylamide hydrogels ( E = 12 kPa) with defined fibronectin coating densities. The optimum fibronectin density of 2.6 μg/cm2 found for single cells was investigated to further improve the differentiation efficiency. However, the differentiation and proliferation dynamics dominate the adhesion forces between the cells and the hydrogel, and thus, result in premature clustering and detachment. In conclusion, we identified an optimized differentiation protocol and provided a basis for the further investigation necessary to potentially use hydrogels as natural cell environment, aiming to raise the differentiation efficiency even more.

Application of Single Cell Type-Derived Spheroids Generated by Using a Hanging Drop Culture Technique in Various In Vitro Disease Models: A Narrow Review

Cell culture methods are indispensable strategies for studies in biological sciences and for drug discovery and testing. Most cell cultures have been developed using two-dimensional (2D) culture methods, but three-dimensional (3D) culture techniques enable the establishment of in vitro models that replicate various pathogenic conditions and they provide valuable insights into the pathophysiology of various diseases as well as more precise results in tests for drug efficacy. However, one difficulty in the use of 3D cultures is selection of the appropriate 3D cell culture technique for the study purpose among the various techniques ranging from the simplest single cell type-derived spheroid culture to the more sophisticated organoid cultures. In the simplest single cell type-derived spheroid cultures, there are also various scaffold-assisted methods such as hydrogel-assisted cultures, biofilm-assisted cultures, particle-assisted cultures, and magnet particle-assisted cultures, as well as non-assisted methods, such as static suspension cultures, floating cultures, and hanging drop cultures. Since each method can be differently influenced by various factors such as gravity force, buoyant force, centrifugal force, and magnetic force, in addition to non-physiological scaffolds, each method has its own advantages and disadvantages, and the methods have different suitable applications. We have been focusing on the use of a hanging drop culture method for modeling various non-cancerous and cancerous diseases because this technique is affected only by gravity force and buoyant force and is thus the simplest method among the various single cell type-derived spheroid culture methods. We have found that the biological natures of spheroids generated even by the simplest method of hanging drop cultures are completely different from those of 2D cultured cells. In this review, we focus on the biological aspects of single cell type-derived spheroid culture and its applications in in vitro models for various diseases.

Towards more realistic cultivated meat by rethinking bioengineering approaches

Cultivated meat (CM) refers to edible lab-grown meat that incorporates cultivated animal cells. It has the potential to address some issues associated with real meat (RM) production, including the ethical and environmental impact of animal farming, and health concerns. Recently, various biomanufacturing methods have been developed to attempt to recreate realistic meat in the laboratory. We therefore overview recent achievements and challenges in the production of CM. We also discuss the issues that need to be addressed and suggest additional recommendations and potential criteria to help to bridge the gap between CM and RM from an engineering standpoint.

The retinoic acid response is a minor component of the cardiac phenotype in H9c2 myoblast differentiation

The H9c2 myoblast cell line, isolated from the left ventricular tissue of rat, is currently used in vitro as a mimetic for skeletal and cardiac muscle due to its biochemical, morphological, and electrical/hormonal signaling properties. During culture, H9c2 cells acquire a myotube phenotype, where a critical component is the inclusion of retinoic acid (RA). The results from some authors on H9c2 suggested that thousands of genes respond to RA stimuli, while others report hundreds of genes responding to RA over different cell types. In this article, using a more appropriate experimental design, we first confirm the H9c2 cardiac phenotype with and without RA and report transcriptomic and physiological changes regarding calcium handling, bioenergetics, and other biological concepts. Interestingly, of the 2360 genes showing a transcriptional change, 622 genes were statistically associated with the RA response. Of these genes, only 305 were RA-specific, and the rest also showed a culture-time component. Thus, the major expression changes (from 74 to 87%) were indeed due to culture conditions over time. Unexpectedly, only a few components of the retinol pathway in KEGG responded to RA. Our results show the role of RA in the H9c2 cultures impacting the interpretation using H9c2 as an in vitro model.

Microfluidic Formulation of Topological Hydrogels for Microtissue Engineering

Microfluidics has recently emerged as a powerful tool in generation of submillimeter-sized cell aggregates capable of performing tissue-specific functions, so-called microtissues, for applications in drug testing, regenerative medicine, and cell therapies. In this work, we review the most recent advances in the field, with particular focus on the formulation of cell-encapsulating microgels of small "dimensionalities": "0D" (particles), "1D" (fibers), "2D" (sheets), etc., and with nontrivial internal topologies, typically consisting of multiple compartments loaded with different types of cells and/or biopolymers. Such structures, which we refer to as topological hydrogels or topological microgels (examples including core-shell or Janus microbeads and microfibers, hollow or porous microstructures, or granular hydrogels) can be precisely tailored with high reproducibility and throughput by using microfluidics and used to provide controlled "initial conditions" for cell proliferation and maturation into functional tissue-like microstructures. Microfluidic methods of formulation of topological biomaterials have enabled significant progress in engineering of miniature tissues and organs, such as pancreas, liver, muscle, bone, heart, neural tissue, or vasculature, as well as in fabrication of tailored microenvironments for stem-cell expansion and differentiation, or in cancer modeling, including generation of vascularized tumors for personalized drug testing. We review the available microfluidic fabrication methods by exploiting various cross-linking mechanisms and various routes toward compartmentalization and critically discuss the available tissue-specific applications. Finally, we list the remaining challenges such as simplification of the microfluidic workflow for its widespread use in biomedical research, bench-to-bedside transition including production upscaling, further in vivo validation, generation of more precise organ-like models, as well as incorporation of induced pluripotent stem cells as a step toward clinical applications.

Loss of full-length dystrophin expression results in major cell-autonomous abnormalities in proliferating myoblasts

Duchenne muscular dystrophy (DMD) affects myofibers and muscle stem cells, causing progressive muscle degeneration and repair defects. It was unknown whether dystrophic myoblasts-the effector cells of muscle growth and regeneration-are affected. Using transcriptomic, genome-scale metabolic modelling and functional analyses, we demonstrate, for the first time, convergent abnormalities in primary mouse and human dystrophic myoblasts. In Dmdmdx myoblasts lacking full-length dystrophin, the expression of 170 genes was significantly altered. Myod1 and key genes controlled by MyoD (Myog, Mymk, Mymx, epigenetic regulators, ECM interactors, calcium signalling and fibrosis genes) were significantly downregulated. Gene ontology analysis indicated enrichment in genes involved in muscle development and function. Functionally, we found increased myoblast proliferation, reduced chemotaxis and accelerated differentiation, which are all essential for myoregeneration. The defects were caused by the loss of expression of full-length dystrophin, as similar and not exacerbated alterations were observed in dystrophin-null Dmdmdx-βgeo myoblasts. Corresponding abnormalities were identified in human DMD primary myoblasts and a dystrophic mouse muscle cell line, confirming the cross-species and cell-autonomous nature of these defects. The genome-scale metabolic analysis in human DMD myoblasts showed alterations in the rate of glycolysis/gluconeogenesis, leukotriene metabolism, and mitochondrial beta-oxidation of various fatty acids. These results reveal the disease continuum: DMD defects in satellite cells, the myoblast dysfunction affecting muscle regeneration, which is insufficient to counteract muscle loss due to myofiber instability. Contrary to the established belief, our data demonstrate that DMD abnormalities occur in myoblasts, making these cells a novel therapeutic target for the treatment of this lethal disease.

The Effects of Mechanical Loading Variations on the Hypertrophic, Anti-Apoptotic, and Anti-Inflammatory Responses of Differentiated Cardiomyocyte-like H9C2 Cells

Cardiomyocytes possess the ability to respond to mechanical stimuli by adapting their biological functions. This study investigated cellular and molecular events in cardiomyocyte-like H9C2 cells during differentiation as well as the signalling and gene expression responses of the differentiated cells under various mechanical stretching protocols in vitro. Immunofluorescence was used to monitor MyHC expression and structural changes during cardiomyoblast differentiation. Moreover, alterations in the expression of cardiac-specific markers, cell cycle regulatory factors, MRFs, hypertrophic, apoptotic, atrophy and inflammatory factors, as well as the activation of major intracellular signalling pathways were evaluated during differentiation and under mechanical stretching of the differentiated H9C2 cells. Compared to undifferentiated cells, advanced-differentiation cardiomyoblasts exhibited increased expression of cardiac-specific markers, MyHC, MRFs, and IGF-1 isoforms. Moreover, differentiated cells that underwent a low strain/frequency mechanical loading protocol of intermediate duration showed enhanced expression of MRFs and hypertrophic factors, along with a decreased expression of apoptotic, atrophy, and inflammatory factors compared to both high-strain/frequency loading protocols and to unloaded cells. These findings suggest that altering the strain and frequency of mechanical loading applied on differentiated H9C2 cardiomyoblasts can regulate their anabolic/survival program, with a low-strain/frequency stretching being, overall, most effective at inducing beneficial responses.

Muscle Regeneration of the Tongue: A review of current clinical and regenerative research strategies

Various abnormalities of the tongue, including cancers, commonly require surgical removal to sequester growth and metastasis. However, even minor resections can affect functional outcomes such as speech and swallowing, thereby reducing quality of life. Surgical resections alone create volumetric muscle loss whereby muscle tissue cannot self-regenerate within the tongue. In these cases, the tongue is reconstructed typically in the form of autologous skin flaps. However, flap reconstruction has many limitations and unfortunately is the primary option for oral and reconstructive surgeons to treat tongue defects. The alternative, but yet undeveloped strategy for tongue reconstruction is regenerative medicine, which widely focuses on building new organs with stem cells. Regenerative medicine has successfully treated many tissues, but research has inadequately addressed the tongue as a vital organ in need of tissue engineering. In this review, we address the current standard for tongue reconstruction, the cellular mechanisms of muscle cell development, and the stem cell studies that have attempted muscle engineering within the tongue. Until now, no review has focused on engineering the tongue with regenerative medicine, which could guide innovative strategies for tongue reconstruction.

Next Stage Approach to Tissue Engineering Skeletal Muscle

Large-scale muscle injury in humans initiates a complex regeneration process, as not only the muscular, but also the vascular and neuro-muscular compartments have to be repaired. Conventional therapeutic strategies often fall short of reaching the desired functional outcome, due to the inherent complexity of natural skeletal muscle. Tissue engineering offers a promising alternative treatment strategy, aiming to achieve an engineered tissue close to natural tissue composition and function, able to induce long-term, functional regeneration after in vivo implantation. This review aims to summarize the latest approaches of tissue engineering skeletal muscle, with specific attention toward fabrication, neuro-angiogenesis, multicellularity and the biochemical cues that adjuvate the regeneration process.

Crosslinked nanogel-based porous hydrogel as a functional scaffold for tongue muscle regeneration

Surgical resection in tongue cancer can impair speech and swallowing, reducing quality of life. There is a need for biomaterials that can regenerate tongue muscle tissue defects. Ideally, such a biomaterial would allow controlled release of therapeutic proteins, support the survival and differentiation of therapeutic cells, and promote tongue muscle regeneration in vivo. The aim of the current study was to assess these factors in an acryloyl group-modified crosslinked nanogel, consisting of cholesterol-bearing pullulan hydrogel nanoparticles, to determine its potential as a regenerative therapeutic following tongue resection. The hydrogel demonstrated substantial porosity and underwent slow biodegradation. When loaded with a model protein, the gel enabled sustained protein release over two weeks in serum, with no initial burst release. Mouse myoblasts demonstrated adhesion to the hydrogel and cell survival was observed up to one week. Gel-encapsulated myoblasts demonstrated normal myotube differentiation. Myoblast-loaded gels were implanted in a tongue defect in mice, and there was a significant increase in newly-regenerated myofibers in gel-implanted animals. The developed biomaterial platform demonstrates significant potential as a regenerative treatment following tongue resection, as it facilitates both protein and cell-mediated therapy, and stimulates tongue muscle regeneration in vivo.

Microfluidic technologies to engineer mesenchymal stem cell aggregates-applications and benefits

Three-dimensional cell culture and the forming multicellular aggregates are superior over traditional monolayer approaches due to better mimicking of in vivo conditions and hence functions of a tissue. A considerable amount of attention has been devoted to devising efficient methods for the rapid formation of uniform-sized multicellular aggregates. Microfluidic technology describes a platform of techniques comprising microchannels to manipulate the small number of reagents with unique properties and capabilities suitable for biological studies. The focus of this review is to highlight recent studies of using microfluidics, especially droplet-based types for the formation, culture, and harvesting of mesenchymal stem cell aggregates and their subsequent application in stem cell biology, tissue engineering, and drug screening. Droplet-based microfluidics can be used to form microgels as carriers for delivering cells and to provide biological cues to the target tissue so as to be minimally invasive. Stem cell-laden microgels with a shape-forming property can be used as smart building blocks by injecting them into the injured tissue thereby constituting the cornerstone of tissue regeneration.