Live reporting for hypoxia: Hypoxia sensor-modified mesenchymal stem cells as in vitro reporters

Development of a Human Recombinant Collagen for Vat Polymerization-Based Bioprinting

In light-based 3D-bioprinting, gelatin methacrylate (GelMA) is one of the most widely used materials, as it supports cell attachment, and shows good biocompatibility and degradability in vivo. However, as an animal-derived material, it also causes safety concerns when used in medical applications. Gelatin is a partial hydrolysate of collagen, containing high amounts of hydroxyproline. This causes the material to form a thermally induced gel at ambient temperatures, a behavior also observed in GelMA. This temperature-dependent gelation requires precise temperature control during the bioprinting process to prevent the gelation of the material. To avoid safety concerns associated with animal-derived materials and reduce potential issues caused by thermal gelation, a recombinant human alpha-1 collagen I fragment was expressed in Komagataella phaffii without hydroxylation. The resulting protein was successfully modified with methacryloyl groups and underwent rapid photopolymerization upon ultraviolet light exposure. The developed material exhibited slightly slower polymerization and lower storage modulus compared to GelMA, while it showed higher stretchability. However, unlike the latter, the material did not undergo physical gelation at ambient temperatures, but only when cooled down to below 10°C, a characteristic that has not been described for comparable materials so far. This gelation was not caused by the formation of triple-helical structures, as shown by the absence of the characteristic peak at 220 nm in CD spectra. Moreover, the developed recombinant material facilitated cell adherence with high cell viability after crosslinking via light to a 3D structure. Furthermore, desired geometries could be easily printed on a stereolithographic bioprinter.

Tumoroids, a valid preclinical screening platform for monitoring cancer angiogenesis

In recent years, biologists and clinicians have witnessed prominent advances in in vitro 3D culture techniques related to biomimetic human/animal tissue analogs. Numerous data have confirmed that unicellular and multicellular (tumoroids) tumor spheroids with dense native cells in certain matrices are sensitive and valid analytical tools for drug screening, cancer cell dynamic growth, behavior, etc. in laboratory settings. Angiogenesis/vascularization is a very critical biological phenomenon to support oxygen and nutrients to tumor cells within the deep layer of solid masses. It has been shown that endothelial cell (EC)-incorporated or -free spheroid/tumoroid systems provide a relatively reliable biological platform for monitoring the formation of nascent blood vessels in micron/micrometer scales. Besides, the paracrine angiogenic activity of cells within the spheroid/tumoroid systems can be monitored after being treated with different therapeutic approaches. Here, we aimed to collect recent advances and findings related to the monitoring of cancer angiogenesis using unicellular and multicellular tumor spheroids. Vascularized spheroids/tumoroids can help us in the elucidation of mechanisms related to cancer formation, development, and metastasis by monitoring the main influencing factors.

Spheroid trilineage differentiation model of primary mesenchymal stem/stromal cells under hypoxia and serum-free culture conditions

Due to their unique properties, human mesenchymal stem/stromal cells (MSCs) possess tremendous potential in regenerative medicine, particularly in cell-based therapies where the multipotency and immunomodulatory characteristics of MSCs can be leveraged to address a variety of disease states. Although MSC-based cell therapeutics have emerged as one of the most promising medical treatments, the clinical translation is hampered by the variability of MSC-based cellular products caused by tissue source-specific differences and the lack of physiological cell culture approaches that closely mimic the human cellular microenvironment. In this study, a model for trilineage differentiation of primary adipose-, bone marrow-, and umbilical cord-derived MSCs into adipocytes, chondrocytes and osteoblasts was established and characterized. Differentiation was performed in spheroid culture, using hypoxic conditions and serum-free and antibiotics-free medium. This platform was characterized for spheroid diameter and trilineage differentiation capacity reflecting functionality of differentiated cells, as indicated by lineage-specific extracellular matrix (ECM) accumulation and expression of distinct secreted markers. The presented model shows spheroid growth during the course of differentiation and successfully supports trilineage differentiation for MSCs from almost all tissue sources except for osteogenesis of umbilical cord-derived MSCs. These findings indicate that this platform provides a suitable and favorable environment for trilineage differentiation of MSCs from various tissue sources. Therefore, it poses a promising model to generate highly relevant biological data urgently required for clinical translation and therefore might be used in the future to generate in vitro microtissues, building blocks for tissue engineering or as disease models.

Development of a novel high-throughput culture system for hypoxic 3D hydrogel cell culture

Animal models lack physiologic relevance to the human system which results in low clinical translation of results derived from animal testing. Besides spheroids or organoids, hydrogel-based 3D in vitro models are used to mimic the in vivo situation increasing the relevance while reducing animal testing. However, to establish hydrogel-based 3D models in applications such as drug development or personalized medicine, high-throughput culture systems are required. Furthermore, the integration of oxygen-reduced (hypoxic) conditions has become increasingly important to establish more physiologic culture models. Therefore, we developed a platform technology for the high-throughput generation of miniaturized hydrogels for 3D cell culture. The Oli-Up system is based on the shape of a well-plate and allows for the parallel culture of 48 hydrogel samples, each with a volume of 15 µl. As a proof-of-concept, we established a 3D culture of gelatin-methacryloyl (GelMA)-encapsulated mesenchymal stem/stromal cells (MSCs). We used a hypoxia reporter cell line to establish a defined oxygen-reduced environment to precisely trigger cellular responses characteristic of hypoxia in MSCs. In detail, the expression of hypoxia response element (HRE) increased dependent on the oxygen concentration and cell density. Furthermore, MSCs displayed an altered glucose metabolism and increased VEGF secretion upon oxygen-reduction. In conclusion, the Oli-Up system is a platform technology for the high-throughput culture of hydrogel-based 3D models in a defined oxygen environment. As it is amenable for automation, it holds the potential for high-throughput screening applications such as drug development and testing in more physiologic 3D in vitro tissue models.

Hypoxia and Hypoxia Mimetic Agents As Potential Priming Approaches to Empower Mesenchymal Stem Cells

Mesenchymal stem cells (MSC) exhibit self-renewal capacity and multilineage differentiation potential, making them attractive for research and clinical application. The properties of MSC can vary depending on specific micro-environmental factors. MSC resides in specific niches with low oxygen concentrations, where oxygen functions as a metabolic substrate and a signaling molecule. Conventional physical incubators or chemically hypoxia mimetic agents are applied in cultures to mimic the original low oxygen tension settings where MSC originated. This review aims to focus on the current knowledge of the effects of various physical hypoxic conditions and widely used hypoxia-mimetic agents-PHD inhibitors on mesenchymal stem cells at a cellular and molecular level, including proliferation, stemness, differentiation, viability, apoptosis, senescence, migration, immunomodulation behaviors, as well as epigenetic changes.

Genetically Encoded Reporters to Monitor Hypoxia

Hypoxia resulting from an imbalance of oxygen availability and consumption defines a metabolic cellular state with a profound impact on developmental processes, tissue maintenance, and the development of pathologies. Fluorescence imaging using genetically encoded reporters enables hypoxia and oxygen imaging with cellular resolution. Thereby unrestricted visualization of hypoxic cells and regions essentially relies on the availability of oxygen-independent fluorescent proteins like UnaG, isolated from the Japanese freshwater eel. Here, we describe the application of recently developed members of a UnaG-based hypoxia reporter family to visualize oxygenation patterns by in vitro live-cell imaging and during the ex vivo analysis of intracranial xenografted tumors. Thus, the generation of stably transfected transgenic tumor cell lines, the in vitro calibration of the genetically encoded sensors, the surgical procedures for orthotopic xenografting of tumors in mice, and workflows for the respective sample preparation and microscopy are outlined.

Detection of Hypoxia in 2D and 3D Cell Culture Systems Using Genetically Encoded Fluorescent Hypoxia Sensors

In vivo oxygen availability varies widely between cellular microenvironments, depending on the tissue of origin and its cellular niche. It has long been known that too high or too low oxygen concentrations can act as a biological stressor. Thus, the precise control of oxygen availability should be a consideration for cell culture optimization, especially in the field of three-dimensional (3D) cell culture. In this chapter, we describe a system for visualizing oxygen limitations at a cellular level using human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) that were genetically modified to express a fluorescent hypoxia sensor. This sensor can detect the activation of hypoxia-induced factors (HIF) transcription factors that lead to the expression of the oxygen-independent fluorescent protein, UnaG, at low oxygen concentrations. The response of these hypoxia reporter cells can be evaluated in two-dimensional (2D) and 3D cultivation platforms during exposure to hypoxia (1% O2) and normoxia (21% O2) using fluorescence microscopy and flow cytometry. We show that hypoxia reporter MSCs exhibit a hypoxia-induced fluorescence signal in both 2D and 3D cultivation platforms with fast decay kinetics after reoxygenation, rendering it a valuable tool for studying the cellular microenvironment and regenerative potential of hAD-MSCs in an in vivo-like setting.

Hypoxic niches attract and sequester tumor-associated macrophages and cytotoxic T cells and reprogram them for immunosuppression

Glioblastoma (GBM), a highly lethal brain cancer, is notorious for immunosuppression, but the mechanisms remain unclear. Here, we documented a temporospatial patterning of tumor-associated myeloid cells (TAMs) corresponding to vascular changes during GBM progression. As tumor vessels transitioned from the initial dense regular network to later scant and engorged vasculature, TAMs shifted away from perivascular regions and trafficked to vascular-poor areas. This process was heavily influenced by the immunocompetence state of the host. Utilizing a sensitive fluorescent UnaG reporter to track tumor hypoxia, coupled with single-cell transcriptomics, we revealed that hypoxic niches attracted and sequestered TAMs and cytotoxic T lymphocytes (CTLs), where they were reprogrammed toward an immunosuppressive state. Mechanistically, we identified chemokine CCL8 and cytokine IL-1β as two hypoxic-niche factors critical for TAM trafficking and co-evolution of hypoxic zones into pseudopalisading patterns. Therefore, perturbation of TAM patterning in hypoxic zones may improve tumor control.

3D-Printed Microfluidic Perfusion System for Parallel Monitoring of Hydrogel-Embedded Cell Cultures

The use of three-dimensional (3D) cell cultures has become increasingly popular in the contexts of drug discovery, disease modelling, and tissue engineering, as they aim to replicate in vivo-like conditions. To achieve this, new hydrogels are being developed to mimic the extracellular matrix. Testing the ability of these hydrogels is crucial, and the presented 3D-printed microfluidic perfusion system offers a novel solution for the parallel cultivation and evaluation of four separate 3D cell cultures. This system enables easy microscopic monitoring of the hydrogel-embedded cells and significantly reduces the required volumes of hydrogel and cell suspension. This cultivation device is comprised of two 3D-printed parts, which provide four cell-containing hydrogel chambers and the associated perfusion medium chambers. An interfacing porous membrane ensures a defined hydrogel thickness and prevents flow-induced hydrogel detachment. Integrated microfluidic channels connect the perfusion chambers to the overall perfusion system, which can be operated in a standard CO₂-incubator. A 3D-printed adapter ensures the compatibility of the cultivation device with standard imaging systems. Cultivation and cell staining experiments with hydrogel-embedded murine fibroblasts confirmed that cell morphology, viability, and growth inside this cultivation device are comparable with those observed within standard 96-well plates. Due to the high degree of customization offered by additive manufacturing, this system has great potential to be used as a customizable platform for 3D cell culture applications.

Comparative analysis of hypoxic response of human microvascular and umbilical vein endothelial cells in 2D and 3D cell culture systems

In vitro cultivation conditions play a crucial role in cell physiology and the cellular response to external stimuli. Oxygen concentrations represent an essential microenvironmental factor influencing cell physiology and behaviour both in vivo and in vitro. Therefore, new approaches are urgently needed to monitor and control oxygen concentrations in 2D and 3D cultures, as well as cell reactions to these concentrations. In this work, we modified two types of human endothelial cells-human microvascular (huMECs) and umbilical vein endothelial cells (huVECs) with genetically encoded hypoxia biosensors and monitored cell reactions in 2D to different oxygen concentrations. Moreover, we fabricated 3D cell spheroids of different cell numbers and sizes to reveal the onset of hypoxia in huVECs and huMECs. We could demonstrate a quantitative sensor response of two cell types to reduced oxygen supply in 2D and reveal different thresholds for hypoxic response. In 3D cell spheroids we could estimate critical construct sizes for the appearance of a hypoxic core. This work for the first time directly demonstrates different hypoxic signatures for huVECs and huMECs in 2D and 3D cell culture systems.

Studies on oxygen availability and the creation of natural and artificial oxygen gradients in gelatin-methacryloyl hydrogel 3D cell culture

Three-dimensional (3D) cultivation platforms allow the creation of cell models, which more closely resemble in vivo-like cell behavior. Therefore, 3D cell culture platforms have started to replace conventional two-dimensional (2D) cultivation techniques in many fields. Besides the advantages of 3D culture, there are also some challenges: cultivation in 3D often results in an inhomogeneous microenvironment and therefore unique cultivation conditions for each cell inside the construct. As a result, the analysis and precise control over the singular cell state is limited in 3D. In this work, we address these challenges by exploring ways to monitor oxygen concentrations in gelatin methacryloyl (GelMA) 3D hydrogel culture at the cellular level using hypoxia reporter cells and deep within the construct using a non-invasive optical oxygen sensing spot. We could show that the appearance of oxygen limitations is more prominent in softer GelMA-hydrogels, which enable better cell spreading. Beyond demonstrating novel or space-resolved techniques of visualizing oxygen availability in hydrogel constructs, we also describe a method to create a stable and controlled oxygen gradient throughout the construct using a 3D printed flow-through chamber.

Poly(Beta-Amino Ester)s as High-Yield Transfection Reagents for Recombinant Protein Production

Purpose

Transient transfection is an essential tool for recombinant protein production, as it allows rapid screening for expression without stable integration of genetic material into a target cell genome. Poly(ethylenimine) (PEI) is the current gold standard for transient gene transfer, but transfection efficiency and the resulting protein yield are limited by the polymer’s toxicity. This study investigated the use of a class of cationic polymers, poly(beta-amino ester)s (PBAEs), as reagents for transient transfection in comparison to linear 25 kDa PEI, a commonly used transfection reagent.

Methods

Transfection efficiency and protein production were assessed in human embryonic kidney 293F (HEK) and Chinese hamster ovary-S (CHO) cell suspensions using PBAE-based nanoparticles in comparison to linear 25 kDa PEI. Production of both a cytosolic reporter and secreted antibodies was investigated.

Results

In both HEK and CHO cells, several PBAEs demonstrated superior transfection efficiency and enhanced production of a cytosolic reporter compared to linear 25 kDa PEI. This result extended to secreted proteins, as a model PBAE increased the production of 3 different secreted antibodies compared to linear 25 kDa PEI at culture scales ranging from 20 to 2000 mL. In particular, non-viral gene transfer using the lead PBAE/plasmid DNA nanoparticle formulation led to robust transfection of mammalian cells across different constructs, doses, volumes, and cell types.

Conclusion

These results show that PBAEs enhance transfection efficiency and increase protein yield compared to a widespread commercially available reagent, making them attractive candidates as reagents for use in recombinant protein production.

Oxygen Measurement in Microdevices

Oxygen plays a fundamental role in respiration and metabolism, and quantifying oxygen levels is essential in many environmental, industrial, and research settings. Microdevices facilitate the study of dynamic, oxygen-dependent effects in real time. This review is organized around the key needs for oxygen measurement in microdevices, including integrability into microfabricated systems; sensor dynamic range and sensitivity; spatially resolved measurements to map oxygen over two- or three-dimensional regions of interest; and compatibility with multimodal and multianalyte measurements. After a brief overview of biological readouts of oxygen, followed by oxygen sensor types that have been implemented in microscale devices and sensing mechanisms, this review presents select recent applications in organs-on-chip in vitro models and new sensor capabilities enabling oxygen microscopy, bioprocess manufacturing, and pharmaceutical industries. With the advancement of multiplexed, interconnected sensors and instruments and integration with industry workflows, intelligent microdevice-sensor systems including oxygen sensors will have further impact in environmental science, manufacturing, and medicine.

Physiologic isolation and expansion of human mesenchymal stem/stromal cells for manufacturing of cell-based therapy products

The utilization of mesenchymal stem/stromal cells raises new hopes in treatment of diseases and pathological conditions, while at the same time bringing immense challenges for researchers, manufacturers and physicians. It is essential to consider all steps along the in vitro fabrication of cell-based products in order to reach efficient and reproducible treatment outcomes. Here, the optimal protocols for isolation, cultivation and differentiation of mesenchymal stem cells are required. In this review we discuss these aspects and their influence on the final cell-based product quality. We demonstrate that physiological in vitro cell cultivation conditions play a crucial role in therapeutic functionalities of cultivated cells. We show that three-dimensional cell culture, dynamic culture conditions and physiologically relevant in vitro oxygen concentrations during isolation and expansion make a decisive contribution towards the improvement of cell-based products in regenerative medicine.

Biosensors to Monitor Cell Activity in 3D Hydrogel-Based Tissue Models

Three-dimensional (3D) culture models have gained relevant interest in tissue engineering and drug discovery owing to their suitability to reproduce in vitro some key aspects of human tissues and to provide predictive information for in vivo tests. In this context, the use of hydrogels as artificial extracellular matrices is of paramount relevance, since they allow closer recapitulation of (patho)physiological features of human tissues. However, most of the analyses aimed at characterizing these models are based on time-consuming and endpoint assays, which can provide only static and limited data on cellular behavior. On the other hand, biosensing systems could be adopted to measure on-line cellular activity, as currently performed in bi-dimensional, i.e., monolayer, cell culture systems; however, their translation and integration within 3D hydrogel-based systems is not straight forward, due to the geometry and materials properties of these advanced cell culturing approaches. Therefore, researchers have adopted different strategies, through the development of biochemical, electrochemical and optical sensors, but challenges still remain in employing these devices. In this review, after examining recent advances in adapting existing biosensors from traditional cell monolayers to polymeric 3D cells cultures, we will focus on novel designs and outcomes of a range of biosensors specifically developed to provide real-time analysis of hydrogel-based cultures.

Three-dimensional cell culture for the study of nasal polyps

OBJECTIVES

Three-dimensional (3D) cell cultures have many applications such as stem cell biology research, new drug discovery, cancer, and Chronic Rhinosinusitis with Nasal Polyps (CRSwNP). This disease is characterized by a significant impact on quality of life and productivity. The diversity of factors that act in the progression of CRSwNP point to the creation of a cell culture model that allows the integration of different cell types with extracellular matrix. This work aimed to create a cell culture model in 3 dimensions (spheroids) for the study of Nasal Polyposis.

METHODS

Nasal polyp tissue from patients diagnosed with CRSwNP was mechanically dissociated using tweezers and a scalpel and the solution containing cells and small aggregates of nasal polyps was transferred to a Petri dish containing 5 mL of culture medium at the concentration of 10⁶ cells/mL.

RESULTS

The spheroids were cultivated for 20 days, fixed and analyzed using confocal microscopy. In a 3D culture environment, the spheroids were formed both by clustering cells and from small tissue fragments. In the cultures analyzed, the ciliary beat was present from the dissociation of the cells up to 20 days in culture.

CONCLUSION

Our findings also point to these characteristics showing the environment generated in our study, the cells remained differentiated for a longer time and with ciliary beating. Thus, this work shows that nasal polyp-derived cells can be maintained in a 3D environment, enabling better strategies for understanding CRSwNP in situations similar to those found in vivo.

LEVEL OF EVIDENCE

Laboratory studies.

Hypoxia Onset in Mesenchymal Stem Cell Spheroids: Monitoring With Hypoxia Reporter Cells

The therapeutic and differentiation potential of human mesenchymal stems cells (hMSCs) makes these cells a promising candidate for cellular therapies and tissue engineering. On the path of a successful medical application of hMSC, the cultivation of cells in a three-dimensional (3D) environment was a landmark for the transition from simple two-dimensional (2D) testing platforms to complex systems that mimic physiological in vivo conditions and can improve hMSC curative potential as well as survival after implantation. A 3D arrangement of cells can be mediated by scaffold materials where cells get entrapped in pores, or by the fabrication of spheroids, scaffold-free self-organized cell aggregates that express their own extracellular matrix. Independently from the cultivation method, cells expanded in 3D experience an inhomogeneous microenvironment. Many gradients in nutrient supply, oxygen supply, and waste disposal from one hand mimic in vivo microenvironment, but also put every cell in the 3D construct in a different context. Since oxygen concentration in spheroids is compromised in a size-dependent manner, it is crucial to have a closer insight on the thresholds of hypoxic response in such systems. In this work, we want to improve our understanding of oxygen availability and consequensing hypoxia onset in hMSC spheroids. Therefore, we utilized human adipose tissue-derived MSCs (hAD-MSCs) modified with a genetical sensor construct to reveal (I) the influence of spheroid production methods and (II) hMSCs cell number per spheroid to detect the onset of hypoxia in aggregates. We could demonstrate that not only higher cell numbers of MSCs, but also spheroid formation method plays a critical role in onset of hypoxia.