Protocols for the Sequential Solid-State NMR Spectroscopic Assignment of a Uniformly Labeled 25 kDa Protein: HET-s(1-227)

Selective correlations between aliphatic 13C nuclei in protein solid-state NMR

Solid-state nuclear magnetic resonance (NMR) is a potent tool for studying the structures and dynamics of insoluble proteins. It starts with signal assignment through multi-dimensional correlation experiments, where the aliphatic 13Cα-13Cβ correlation is indispensable for identifying specific residues. However, developing efficient methods for achieving this correlation is a challenge in solid-state NMR. We present a simple band-selective zero-quantum (ZQ) recoupling method, named POST-C4161 (PC4), which enhances 13Cα-13Cβ correlations under moderate magic-angle spinning (MAS) conditions. PC4 requires minimal 13C radio-frequency (RF) field and proton decoupling, exhibits high stability against RF variations, and achieves superior efficiency. Comparative tests on various samples, including the formyl-Met-Leu-Phe (fMLF) tripeptide, microcrystalline β1 immunoglobulin binding domain of protein G (GB1), and membrane protein of mechanosensitive channel of large conductance from Methanosarcina acetivorans (MaMscL), demonstrate that PC4 selectively enhances 13Cα-13Cβ correlations by up to 50 % while suppressing unwanted correlations, as compared to the popular dipolar-assisted rotational resonance (DARR). It has addressed the long-standing need for selective 13C-13C correlation methods. We anticipate that this simple but efficient PC4 method will have immediate applications in structural biology by solid-state NMR.

Magic-angle spinning NMR spectral editing of polysaccharides in whole cells using the DREAM scheme

Most bacterial, plant and fungal cells possess at their surface a protective layer called the cell wall, conferring strength, plasticity and rigidity to withstand the osmotic pressure. This molecular barrier is crucial for pathogenic microorganisms, as it protects the cell from the local environment and often constitutes the first structural component encountered in the host-pathogen interaction. In pathogenic molds and yeasts, the cell wall constitutes the main target for the development of clinically-relevant antifungal drugs. In the past decade, solid-state NMR has emerged as a powerful analytical technique to investigate the molecular organization of microbial cell walls in the context of intact cells. 13C NMR chemical shift is an exquisite source of information to identify the polysaccharides present in the cell wall, and two-dimensional 13C-13C correlation experiments provide an efficient tool to rapidly access the polysaccharide composition in whole cells. Here we investigate the use of the adiabatic DREAM (for dipolar recoupling enhancement through amplitude modulation) recoupling scheme to improve solid-state NMR analysis of polysaccharides in intact cells. We demonstrate the advantages of two-dimensional 13C-13C experiments using the DREAM recoupling scheme. We report the spectral editing of polysaccharide signals by varying the radio-frequency carrier position. We provide practical considerations for the implementation of DREAM experiments to characterize polysaccharides in whole cells. We demonstrate the approach on intact fungal cells of Neurospora crassa and Aspergillus fumigatus, a model and a pathogenic filamentous fungus, respectively. The approach could be envisioned to efficiently reduce the spectral crowding of more complex cell surfaces, such as cell wall and peptidoglycan in bacteria.

Solid-state NMR assignment of α-synuclein polymorph prepared from helical intermediate

Synucleinopathies are neurodegenerative diseases characterized by the accumulation of α-synuclein protein aggregates in the neurons and glial cells. Both ex vivo and in vitro α-synuclein fibrils tend to show polymorphism. Polymorphism results in structure variations among fibrils originating from a single polypeptide/protein. The polymorphs usually have different biophysical, biochemical and pathogenic properties. The various pathologies of a single disease might be associated with distinct polymorphs. Similarly, in the case of different synucleinopathies, each condition might be associated with a different polymorph. Fibril formation is a nucleation-dependent process involving the formation of transient and heterogeneous intermediates from monomers. Polymorphs are believed to arise from heterogeneous oligomer populations because of distinct selection mechanisms in different conditions. To test this hypothesis, we isolated and incubated different intermediates during in vitro fibrillization of α-synuclein to form different polymorphs. Here, we report 13C and 15N chemical shifts and the secondary structure of fibrils prepared from the helical intermediate using solid-state nuclear magnetic spectroscopy.

Simplified Preservation of Equivalent Pathways Spectroscopy

Inspired by the recently proposed transverse mixing optimal control pulses (TROP) approach for improving signal in multidimensional magic-angle spinning (MAS) NMR experiments, we present simplified preservation of equivalent pathways spectroscopy (SPEPS). It transfers both transverse components of magnetization that occur during indirect evolutions, theoretically enabling a √2 improvement in sensitivity for each such dimension. We compare SPEPS transfer with TROP and cross-polarization (CP) using membrane protein and fibril samples at MAS of 55 and 100 kHz. In three-dimensional (3D) (H)CANH spectra, SPEPS outperformed TROP and CP by factors of on average 1.16 and 1.69, respectively, for the membrane protein, but only a marginal improvement of 1.09 was observed for the fibril. These differences are discussed, making note of the longer transfer time used for CP, 14 ms, as compared with 2.9 and 3.6 ms for SPEPS and TROP, respectively. Using SPEPS for two transfers in the 3D (H)CANCO experiment resulted in an even larger benefit in signal intensity, with an average improvement of 1.82 as compared with CP. This results in multifold time savings, in particular considering the weaker peaks that are observed to benefit the most from SPEPS.

Structural conservation of HBV-like capsid proteins over hundreds of millions of years despite the shift from non-enveloped to enveloped life-style

The discovery of nackednaviruses provided new insight into the evolutionary history of the hepatitis B virus (HBV): The common ancestor of HBV and nackednaviruses was non-enveloped and while HBV acquired an envelope during evolution, nackednaviruses remained non-enveloped. We report the capsid structure of the African cichlid nackednavirus (ACNDV), determined by cryo-EM at 3.7 Å resolution. This enables direct comparison with the known capsid structures of HBV and duck HBV, prototypic representatives of the mammalian and avian lineages of the enveloped Hepadnaviridae, respectively. The sequence identity with HBV is 24% and both the ACNDV capsid protein fold and the capsid architecture are very similar to those of the Hepadnaviridae and HBV in particular. Acquisition of the hepadnaviral envelope was thus not accompanied by a major change in capsid structure. Dynamic residues at the spike tip are tentatively assigned by solid-state NMR, while the C-terminal domain is invisible due to dynamics. Solid-state NMR characterization of the capsid structure reveals few conformational differences between the quasi-equivalent subunits of the ACNDV capsid and an overall higher capsid structural disorder compared to HBV. Despite these differences, the capsids of ACNDV and HBV are structurally highly similar despite the 400 million years since their separation.

Specific Signal Enhancement on an RNA-Protein Interface by Dynamic Nuclear Polarization

Sensitivity and specificity are both crucial for the efficient solid-state NMR structure determination of large biomolecules. We present an approach that features both advantages by site-specific enhancement of NMR spectroscopic signals from the protein-RNA binding site within a ribonucleoprotein (RNP) by dynamic nuclear polarization (DNP). This approach uses modern biochemical techniques for sparse isotope labeling and exploits the molecular dynamics of ¹³ C-labeled methyl groups exclusively present in the protein. These dynamics drive heteronuclear cross relaxation and thus allow specific hyperpolarization transfer across the biomolecular complex's interface. For the example of the L7Ae protein in complex with a 26mer guide RNA minimal construct from the box C/D complex in archaea, we demonstrate that a single methyl-nucleotide contact is responsible for most of the polarization transfer to the RNA, and that this specific transfer can be used to boost both NMR spectral sensitivity and specificity by DNP.

Molecular elucidation of drug-induced abnormal assemblies of the hepatitis B virus capsid protein by solid-state NMR

Hepatitis B virus (HBV) capsid assembly modulators (CAMs) represent a recent class of anti-HBV antivirals. CAMs disturb proper nucleocapsid assembly, by inducing formation of either aberrant assemblies (CAM-A) or of apparently normal but genome-less empty capsids (CAM-E). Classical structural approaches have revealed the CAM binding sites on the capsid protein (Cp), but conformational information on the CAM-induced off-path aberrant assemblies is lacking. Here we show that solid-state NMR can provide such information, including for wild-type full-length Cp183, and we find that in these assemblies, the asymmetric unit comprises a single Cp molecule rather than the four quasi-equivalent conformers typical for the icosahedral T = 4 symmetry of the normal HBV capsids. Furthermore, while in contrast to truncated Cp149, full-length Cp183 assemblies appear, on the mesoscopic level, unaffected by CAM-A, NMR reveals that on the molecular level, Cp183 assemblies are equally aberrant. Finally, we use a eukaryotic cell-free system to reveal how CAMs modulate capsid-RNA interactions and capsid phosphorylation. Our results establish a structural view on assembly modulation of the HBV capsid, and they provide a rationale for recently observed differences between in-cell versus in vitro capsid assembly modulation.

Solid-State NMR Structure of Amyloid-β Fibrils

Amyloid fibrils are involved in a number of diseases and notably play a role in neurodegeneration, where they are present in plaques in the brain. Their structure determination might help in finding ways to interfere with their formation, and ultimately prevent disease, by revealing the structure-function relationship and helping to design molecules targeting initial assembly steps and further propagation. Here, we describe the different steps in NMR protocols which allowed the 3D structure determination of amyloid-β fibrils.

Solid-state NMR of paired helical filaments formed by the core tau fragment tau(297-391)

Aggregation of the tau protein into fibrillar cross-β aggregates is a hallmark of Alzheimer's diseases (AD) and many other neurodegenerative tauopathies. Recently, several core structures of patient-derived tau paired helical filaments (PHFs) have been solved revealing a structural variability that often correlates with a specific tauopathy. To further characterize the dynamics of these fibril cores, to screen for strain-specific small molecules as potential biomarkers and therapeutics, and to develop strain-specific antibodies, recombinant in-vitro models of tau filaments are needed. We recently showed that a 95-residue fragment of tau (from residue 297 to 391), termed dGAE, forms filaments in vitro in the absence of polyanionic co-factors often used for in vitro aggregation of full-length tau. Tau(297-391) was identified as the proteolytic resistant core of tau PHFs and overlaps with the structures characterized by cryo-electron microscopy in ex vivo PHFs, making it a promising model for the study of AD tau filaments in vitro. In the present study, we used solid-state NMR to characterize tau(297-391) filaments and show that such filaments assembled under non-reducing conditions are more dynamic and less ordered than those made in the presence of the reducing agent DTT. We further report the resonance assignment of tau(297-391)+DTT filaments and compare it to existing core structures of tau.

α-Synuclein aggregation intermediates form fibril polymorphs with distinct prion-like properties

α-Synuclein (α-Syn) amyloids in synucleinopathies are suggested to be structurally and functionally diverse, reminiscent of prion-like strains. But how the aggregation of the same precursor protein results in the formation of fibril polymorphs remains elusive. Here, we demonstrate the structure-function relationship of two polymorphs, pre-matured fibrils (PMFs) and helix-matured fibrils (HMFs), based on α-Syn aggregation intermediates. These polymorphs display the structural differences as demonstrated by solid-state NMR and mass spectrometry studies and also possess different cellular activities such as seeding, internalization, and cell-to-cell transfer of aggregates. HMFs with a compact core structure exhibit low seeding potency but readily internalize and transfer from one cell to another. The less structured PMFs lack transcellular transfer ability but induce abundant α-Syn pathology and trigger the formation of aggresomes in cells. Overall, the study highlights that the conformational heterogeneity in the aggregation pathway may lead to fibril polymorphs with distinct prion-like behavior.

Epitope Mapping and Binding Assessment by Solid-State NMR Provide a Way for the Development of Biologics under the Quality by Design Paradigm

Multispecific biologics are an emerging class of drugs, in which antibodies and/or proteins designed to bind pharmacological targets are covalently linked or expressed as fusion proteins to increase both therapeutic efficacy and safety. Epitope mapping on the target proteins provides key information to improve the affinity and also to monitor the manufacturing process and drug stability. Solid-state NMR has been here used to identify the pattern of the residues of the programmed cell death ligand 1 (PD-L1) ectodomain that are involved in the interaction with a new multispecific biological drug. This is possible because the large size and the intrinsic flexibility of the complexes are not limiting factors for solid-state NMR.

Solid-State NMR: Methods for Biological Solids

In the last two decades, solid-state nuclear magnetic resonance (ssNMR) spectroscopy has transformed from a spectroscopic technique investigating small molecules and industrial polymers to a potent tool decrypting structure and underlying dynamics of complex biological systems, such as membrane proteins, fibrils, and assemblies, in near-physiological environments and temperatures. This transformation can be ascribed to improvements in hardware design, sample preparation, pulsed methods, isotope labeling strategies, resolution, and sensitivity. The fundamental engagement between nuclear spins and radio-frequency pulses in the presence of a strong static magnetic field is identical between solution and ssNMR, but the experimental procedures vastly differ because of the absence of molecular tumbling in solids. This review discusses routinely employed state-of-the-art static and MAS pulsed NMR methods relevant for biological samples with rotational correlation times exceeding 100's of nanoseconds. Recent developments in signal filtering approaches, proton methodologies, and multiple acquisition techniques to boost sensitivity and speed up data acquisition at fast MAS are also discussed. Several examples of protein structures (globular, membrane, fibrils, and assemblies) solved with ssNMR spectroscopy have been considered. We also discuss integrated approaches to structurally characterize challenging biological systems and some newly emanating subdisciplines in ssNMR spectroscopy.

Dynamic Nuclear Polarization for Sensitivity Enhancement in Biomolecular Solid-State NMR

Solid-state NMR with magic-angle spinning (MAS) is an important method in structural biology. While NMR can provide invaluable information about local geometry on an atomic scale even for large biomolecular assemblies lacking long-range order, it is often limited by low sensitivity due to small nuclear spin polarization in thermal equilibrium. Dynamic nuclear polarization (DNP) has evolved during the last decades to become a powerful method capable of increasing this sensitivity by two to three orders of magnitude, thereby reducing the valuable experimental time from weeks or months to just hours or days; in many cases, this allows experiments that would be otherwise completely unfeasible. In this review, we give an overview of the developments that have opened the field for DNP-enhanced biomolecular solid-state NMR including state-of-the-art applications at fast MAS and high magnetic field. We present DNP mechanisms, polarizing agents, and sample constitution methods suitable for biomolecules. A wide field of biomolecular NMR applications is covered including membrane proteins, amyloid fibrils, large biomolecular assemblies, and biomaterials. Finally, we present perspectives and recent developments that may shape the field of biomolecular DNP in the future.

Solid-State NMR Dipolar and Chemical Shift Anisotropy Recoupling Techniques for Structural and Dynamical Studies in Biological Systems

With the development of NMR methodology and technology during the past decades, solid-state NMR (ssNMR) has become a particularly important tool for investigating structure and dynamics at atomic scale in biological systems, where the recoupling techniques play pivotal roles in modern high-resolution MAS NMR. In this review, following a brief introduction on the basic theory of recoupling in ssNMR, we highlight the recent advances in dipolar and chemical shift anisotropy recoupling methods, as well as their applications in structural determination and dynamical characterization at multiple time scales (i.e., fast-, intermediate-, and slow-motion). The performances of these prevalent recoupling techniques are compared and discussed in multiple aspects, together with the representative applications in biomolecules. Given the recent emerging advances in NMR technology, new challenges for recoupling methodology development and potential opportunities for biological systems are also discussed.

Strategies for RNA Resonance Assignment by 13C/15N- and 1H-Detected Solid-State NMR Spectroscopy

Magic angle spinning (MAS) solid-state NMR (ssNMR) is an established tool that can be applied to non-soluble or non-crystalline biomolecules of any size or complexity. The ssNMR method advances rapidly due to technical improvements and the development of advanced isotope labeling schemes. While ssNMR has shown significant progress in structural studies of proteins, the number of RNA studies remains limited due to ssNMR methodology that is still underdeveloped. Resonance assignment is the most critical and limiting step in the structure determination protocol that defines the feasibility of NMR studies. In this review, we summarize the recent progress in RNA resonance assignment methods and approaches for secondary structure determination by ssNMR. We critically discuss advantages and limitations of conventional 13C- and 15N-detected experiments and novel 1H-detected methods, identify optimal regimes for RNA studies by ssNMR, and provide our view on future ssNMR studies of RNA in large RNP complexes.

Evaluation of the Higher Order Structure of Biotherapeutics Embedded in Hydrogels for Bioprinting and Drug Release

Biocompatible hydrogels for tissue regeneration/replacement and drug release with specific architectures can be obtained by three-dimensional bioprinting techniques. The preservation of the higher order structure of the proteins embedded in the hydrogels as drugs or modulators is critical for their biological activity. Solution nuclear magnetic resonance (NMR) experiments are currently used to investigate the higher order structure of biotherapeutics in comparability, similarity, and stability studies. However, the size of pores in the gel, protein-matrix interactions, and the size of the embedded proteins often prevent the use of this methodology. The recent advancements of solid-state NMR allow for the comparison of the higher order structure of the matrix-embedded and free isotopically enriched proteins, allowing for the evaluation of the functionality of the material in several steps of hydrogel development. Moreover, the structural information at atomic detail on the matrix-protein interactions paves the way for a structure-based design of these biomaterials.

Solid-state NMR approaches to investigate large enzymes in complex with substrates and inhibitors

Enzyme catalysis is omnipresent in the cell. The mechanisms by which highly evolved protein folds enable rapid and specific chemical transformation of substrates belong to the marvels of structural biology. Targeting of enzymes with inhibitors has immediate application in drug discovery, from chemotherapeutics over antibiotics to antivirals. NMR spectroscopy combines multiple assets for the investigation of enzyme function. The non-invasive technique can probe enzyme structure and dynamics and map interactions with substrates, cofactors and inhibitors at the atomic level. With experiments performed at close to native conditions, catalytic transformations can be monitored in real time, giving access to kinetic parameters. The power of NMR in the solid state, in contrast with solution, lies in the absence of fundamental size limitations, which is crucial for enzymes that are either membrane-embedded or assemble into large soluble complexes exceeding hundreds of kilodaltons in molecular weight. Here we review recent progress in solid-state NMR methodology, which has taken big leaps in the past years due to steady improvements in hardware design, notably magic angle spinning, and connect it to parallel biochemical advances that enable isotope labelling of increasingly complex enzymes. We first discuss general concepts and requirements of the method and then highlight the state-of-the-art in sample preparation, structure determination, dynamics and interaction studies. We focus on examples where solid-state NMR has been instrumental in elucidating enzyme mechanism, alone or in integrative studies.

The three-dimensional structure of human β-endorphin amyloid fibrils

In the pituitary gland, hormones are stored in a functional amyloid state within acidic secretory granules before they are released into the blood. To gain a detailed understanding of the structure-function relationship of amyloids in hormone secretion, the three-dimensional (3D) structure of the amyloid fibril of the human hormone β-endorphin was determined by solid-state NMR. We find that β-endorphin fibrils are in a β-solenoid conformation with a protonated glutamate residue in their fibrillar core. During exocytosis of the hormone amyloid the pH increases from acidic in the secretory granule to neutral level in the blood, thus it is suggested-and supported with mutagenesis data-that the pH change in the cellular milieu acts through the deprotonation of glutamate 8 to release the hormone from the amyloid. For amyloid disassembly in the blood, it is proposed that the pH change acts together with a buffer composition change and hormone dilution. In the pituitary gland, peptide hormones can be stored as amyloid fibrils within acidic secretory granules before release into the blood stream. Here, we use solid-state NMR to determine the 3D structure of the amyloid fiber formed by the human hormone β-endorphin. We find that β-endorphin fibrils are in a β-solenoid conformation that is generally reminiscent of other functional amyloids. In the β-endorphin amyloid, every layer of the β-solenoid is composed of a single peptide and protonated Glu8 is located in the fibrillar core. The secretory granule has an acidic pH but, on exocytosis, the β-endorphin fibril would encounter neutral pH conditions (pH 7.4) in the blood; this pH change would result in deprotonation of Glu8 to release the hormone peptide from the amyloid. Analyses of β-endorphin variants carrying mutations in Glu8 support the role of the protonation state of this residue in fibril disassembly, among other environmental changes.

Solid-State NMR for Studying the Structure and Dynamics of Viral Assemblies

Structural virology reveals the architecture underlying infection. While notably electron microscopy images have provided an atomic view on viruses which profoundly changed our understanding of these assemblies incapable of independent life, spectroscopic techniques like NMR enter the field with their strengths in detailed conformational analysis and investigation of dynamic behavior. Typically, the large assemblies represented by viral particles fall in the regime of biological high-resolution solid-state NMR, able to follow with high sensitivity the path of the viral proteins through their interactions and maturation steps during the viral life cycle. We here trace the way from first solid-state NMR investigations to the state-of-the-art approaches currently developing, including applications focused on HIV, HBV, HCV and influenza, and an outlook to the possibilities opening in the coming years.

Prion Amyloid Polymorphs - The Tag Might Change It All

Sup35p is a protein from Saccharomyces cerevisiae. It can propagate using a prion-like mechanism, which means that it can recruit non-prion soluble Sup35p into insoluble fibrils. Sup35p is a large protein showing three distinct domains, N, M and an extended globular domain. We have previously studied the conformations of the full-length and truncated NM versions carrying poly-histidine tags on the N-terminus. Comparison with structural data from C-terminally poly-histidine tagged NM from the literature surprisingly revealed discrepancies. Here we investigated fibrils from the untagged, as well as a C-terminally poly-histidine tagged NM construct, using solid-state NMR. We find that the conformation of untagged NM is very close to the N-terminally tagged NM and confirms our previous findings. The C-terminal poly-histidine tag, in contrast, drastically changes the NM fibril structure, and yields data consistent with results obtained previously on this construct. We conclude that the C-terminally located Sup35p globular domain influences the structure of the fibrillar core at the N domain, as previously shown. We further conclude, based on the present data, that small tags on NM C-terminus have a substantial, despite different, impact. Modifications at this remote localization thus shows an unexpected influence on the fibril structure, and importantly also its propensity to induce [PSI+].

Solid-state NMR spectroscopy for characterization of RNA and RNP complexes

Ribonucleic acids are driving a multitude of biological processes where they act alone or in complex with proteins (ribonucleoproteins, RNP). To understand these processes both structural and mechanistic information about RNA is necessary. Due to their conformational plasticity RNA pose a challenge for mainstream structural biology methods. Solid-state NMR (ssNMR) spectroscopy is an emerging technique that can be applied to biomolecular complexes of any size in close-to-native conditions. This review outlines recent methodological developments in ssNMR for structural characterization of RNA and protein-RNA complexes and provides relevant examples.

Structure of a Protein-RNA Complex by Solid-State NMR Spectroscopy

Solid‐state NMR (ssNMR) is applicable to high molecular‐weight (MW) protein assemblies in a non‐amorphous precipitate. The technique yields atomic resolution structural information on both soluble and insoluble particles without limitations of MW or requirement of crystals. Herein, we propose and demonstrate an approach that yields the structure of protein–RNA complexes (RNP) solely from ssNMR data. Instead of using low‐sensitivity magnetization transfer steps between heteronuclei of the protein and the RNA, we measure paramagnetic relaxation enhancement effects elicited on the RNA by a paramagnetic tag coupled to the protein. We demonstrate that this data, together with chemical‐shift‐perturbation data, yields an accurate structure of an RNP complex, starting from the bound structures of its components. The possibility of characterizing protein–RNA interactions by ssNMR may enable applications to large RNP complexes, whose structures are not accessible by other methods.

A solid-state NMR tool box for the investigation of ATP-fueled protein engines

Motor proteins are involved in a variety of cellular processes. Their main purpose is to convert the chemical energy released during adenosine triphosphate (ATP) hydrolysis into mechanical work. In this review, solid-state Nuclear Magnetic Resonance (NMR) approaches are discussed allowing studies of structures, conformational events and dynamic features of motor proteins during a variety of enzymatic reactions. Solid-state NMR benefits from straightforward sample preparation based on sedimentation of the proteins directly into the Magic-Angle Spinning (MAS) rotor. Protein resonance assignment is the crucial and often time-limiting step in interpreting the wealth of information encoded in the NMR spectra. Herein, potentials, challenges and limitations in resonance assignment for large motor proteins are presented, focussing on both biochemical and spectroscopic approaches. This work highlights NMR tools available to study the action of the motor domain and its coupling to functional processes, as well as to identify protein-nucleotide interactions during events such as DNA replication. Arrested protein states of reaction coordinates such as ATP hydrolysis can be trapped for NMR studies by using stable, non-hydrolysable ATP analogues that mimic the physiological relevant states as accurately as possible. Recent advances in solid-state NMR techniques ranging from Dynamic Nuclear Polarization (DNP), ³¹P-based heteronuclear correlation experiments, ¹H-detected spectra at fast MAS frequencies >100 kHz to paramagnetic NMR are summarized and their applications to the bacterial DnaB helicase from Helicobacter pylori are discussed.

Box C/D snoRNPs: solid-state NMR fingerprint of an early-stage 50 kDa assembly intermediate

Many cellular functions rely on stable protein-only or protein-RNA complexes. Deciphering their assembly mechanism is a key question in cell biology. We here focus on box C/D small nucleolar ribonucleoproteins involved in ribosome biogenesis. The mature particles contain four core proteins and a guide RNA. Despite their relatively simple composition, these particles don't self-assemble in eukaryote and the production of a native and functional particle requires a large number of transient other proteins, called assembly factors. We present here ¹³C and ¹⁵N solid-state NMR assignment of yeast 126-residue core protein Snu13 in the context of its 50 kDa pre-complex with assembly factors Rsa1p:Hit1p. In this sample, only one third of the protein is labelled, leading to a low sensitivity. We could nevertheless obtain assignment data for 91% of the residues. Secondary structure derived from our assignments shows that Snu13p overall structure is maintained in the context of the complex. Chemical shift perturbations are analysed to evaluate Snu13p conformational changes and interaction interface upon binding to its partner proteins. While indirect perturbations are observed in the hydrophobic core, we find other good candidate residues belonging to the interaction interface. We describe the role of some Snu13p N-terminal and C-terminal residues, not identified in previous structural studies. These preliminary results will serve as a basis for future interaction studies, especially by adding RNA, to decipher box C/D snoRNP particles assembly pathway.

Nucleotide Binding Modes in a Motor Protein Revealed by 31 P- and 1 H-Detected MAS Solid-State NMR Spectroscopy

Protein-nucleic acid interactions play important roles not only in energy-providing reactions, such as ATP hydrolysis, but also in reading, extending, packaging, or repairing genomes. Although they can often be analyzed in detail with X-ray crystallography, complementary methods are needed to visualize them in complexes, which are not crystalline. Here, we show how solid-state NMR spectroscopy can detect and classify protein-nucleic interactions through site-specific 1 H- and 31 P-detected spectroscopic methods. The sensitivity of 1 H chemical-shift values on noncovalent interactions involved in these molecular recognition processes is exploited allowing us to probe directly the chemical bonding state, an information, which is not directly accessible from an X-ray structure. We show that these methods can characterize interactions in easy-to-prepare sediments of the 708 kDa dodecameric DnaB helicase in complex with ADP:AlF4- :DNA, and this despite the very challenging size of the complex.

Mixing Aβ(1–40) and Aβ(1–42) peptides generates unique amyloid fibrils

Solid-state NMR experiments reveal that the two isoforms of the beta-amyloid peptide (Aβ(1–40) and Aβ(1–42)) are able to form unique interlaced mixed fibrils.

NMR of Immobilized Enzymes

Solid-state NMR has become the method of choice for the assessment of protein structure for insoluble objects lacking long-range order. In this context, it is apparent that solid-state NMR is also perfectly poised toward the characterization of immobilized proteins. For these systems, it is possible to understand at the atomic level which perturbations, if any, are occurring as a result of the functionalization. Here we describe how it is possible to accomplish the NMR characterization of enzymes that have been immobilized through different approaches, and we introduce the reader to the choice of the experimental strategy that can be useful in different cases. An outlook on the level of information that can be attained is also given, in view of recent methodological advancements.

Including Protons in Solid-State NMR Resonance Assignment and Secondary Structure Analysis: The Example of RNA Polymerase II Subunits Rpo4/7

¹H-detected solid-state NMR experiments feasible at fast magic-angle spinning (MAS) frequencies allow accessing ¹H chemical shifts of proteins in solids, which enables their interpretation in terms of secondary structure. Here we present ¹H and ¹³C-detected NMR spectra of the RNA polymerase subunit Rpo7 in complex with unlabeled Rpo4 and use the ¹³C, ¹⁵N, and ¹H chemical-shift values deduced from them to study the secondary structure of the protein in comparison to a known crystal structure. We applied the automated resonance assignment approach FLYA including ¹H-detected solid-state NMR spectra and show its success in comparison to manual spectral assignment. Our results show that reasonably reliable secondary-structure information can be obtained from ¹H secondary chemical shifts (SCS) alone by using the sum of ¹H^α and ¹H^N SCS rather than by TALOS. The confidence, especially at the boundaries of the observed secondary structure elements, is found to increase when evaluating ¹³C chemical shifts, here either by using TALOS or in terms of ¹³C SCS.

Structural characterization of a protein adsorbed on aluminum hydroxide adjuvant in vaccine formulation

The heterogeneous composition of vaccine formulations and the relatively low concentration make the characterization of the protein antigens extremely challenging. Aluminum-containing adjuvants have been used to enhance the immune response of several antigens over the last 90 years and still remain the most commonly used. Here, we show that solid-state NMR and isotope labeling methods can be used to characterize the structural features of the protein antigen component of vaccines and to investigate the preservation of the folding state of proteins adsorbed on Alum hydroxide matrix, providing the way to identify the regions of the protein that are mainly affected by the presence of the inorganic matrix. l-Asparaginase from E. coli has been used as a pilot model of protein antigen. This methodology can find application in several steps of the vaccine development pipeline, from the antigen optimization, through the design of vaccine formulation, up to stability studies and manufacturing process.

The conformational changes coupling ATP hydrolysis and translocation in a bacterial DnaB helicase

DnaB helicases are motor proteins that couple ATP-hydrolysis to the loading of the protein onto DNA at the replication fork and to translocation along DNA to separate double-stranded DNA into single strands during replication. Using a network of conformational states, arrested by nucleotide mimics, we herein characterize the reaction coordinates for ATP hydrolysis, DNA loading and DNA translocation using solid-state NMR spectroscopy. AMP-PCP is used as pre-hydrolytic, ADP:AlF4- as transition state, and ADP as post-hydrolytic ATP mimic. 31P and 13C NMR spectra reveal conformational and dynamic responses to ATP hydrolysis and the resulting DNA loading and translocation with single amino-acid resolution. This allows us to identify residues guiding the DNA translocation process and to explain the high binding affinities for DNA observed for ADP:AlF4-, which turns out to be optimally preconfigured to bind DNA.

Metal centers in biomolecular solid-state NMR

Solid state NMR (SSNMR) has earned a substantial success in the characterization of paramagnetic systems over the last decades. Nowadays, the resolution and sensitivity of solid state NMR in biological molecules has improved significantly and these advancements can be translated into the study of paramagnetic biomolecules. However, the electronic properties of different metal centers affect the quality of their SSNMR spectra differently, and not all systems turn out to be equally easy to approach by this technique. In this review we will try to give an overview of the properties of different paramagnetic centers and how they can be used to increase the chances of experimental success.

Solid-state MAS NMR resonance assignment methods for proteins

The prerequisite to structural or functional studies of proteins by NMR is generally the assignment of resonances. Since the first assignment of proteins by solid-state MAS NMR was conducted almost two decades ago, a wide variety of different pulse sequences and methods have been proposed and continue to be developed. Traditionally, a variety of 2D and 3D ¹³C-detected experiments have been used for the assignment of backbone and side-chain ¹³C and ¹⁵N resonances. These methods have found widespread use across the field. But as the hardware has changed and higher spinning frequencies and magnetic fields are becoming available, the ability to use direct proton detection is opening up a new set of assignment methods based on triple-resonance experiments. This review describes solid-state MAS NMR assignment methods using carbon detection and proton detection at different deuteration levels. The use of different isotopic labelling schemes as an aid to assignment in difficult cases is discussed as well as the increasing number of software packages that support manual and automated resonance assignment.

Solid-state [13C-15N] NMR resonance assignment of hepatitis B virus core protein

Each year, nearly 900,000 deaths are due to serious liver diseases caused by chronic hepatitis B virus infection. The viral particle is composed of an outer envelope and an inner icosahedral nucleocapsid formed by multiple dimers of a ~ 20 kDa self-assembling core protein (Cp). Here we report the solid-state ¹³C and ¹⁵N resonance assignments of the assembly domain, Cp149, of the core protein in its capsid form. A secondary chemical shift analysis of the 140 visible residues suggests an overall alpha-helical three-dimensional fold matching that derived for Cp149 from the X-ray crystallography of the capsid, and from solution-state NMR of the Cp149 dimer. Interestingly, however, at three distinct regions the chemical shifts in solution differ significantly between core proteins in the capsid state versus in the dimer state, strongly suggesting the respective residues to be involved in capsid assembly.

Efficient low-power TOBSY sequences for fast MAS

Through-bond J-coupling based experiments in solid-state NMR spectroscopy are challenging because the J couplings are typically much smaller than the dipolar couplings. This often leads to a lower transfer efficiency compared to dipolar-coupling based sequences. One of the reasons for the low transfer efficiency are the second-order cross terms involving the strong heteronuclear dipolar couplings leading to fast magnetization decay. Here, we show that by employing a symmetry-based C9 sequence, which was carefully selected to suppress second-order terms, efficient polarization transfers of up to 80% can be achieved without decoupling on fully protonated two-spin model systems at a MAS frequency of 55.5 kHz with rf-field amplitudes of about 25 kHz. In addition, we analyse the effects of rf inhomogeneity and crystallites selection due to the polarization preparation method on the TOBSY transfer efficiency. We demonstrate on small model substances as well as on deuterated and 100% back-exchanged ubiquitin that C9₃₉¹ and C9₄₈¹ are efficient and practical TOBSY sequences at experimental conditions ranging from proton Larmor frequencies of 400-850 MHz, and MAS frequencies ranging from 55.5 to 111.1 kHz.

Bidirectional band-selective magnetization transfer along the protein backbone doubles the information content of solid-state NMR correlation experiments

Resonance assignment is the first stage towards solving the structure of a protein. This is normally achieved by the employment of separate inter and intra residue experiments. By utilising the mixed rotation and rotary recoupling (MIRROR) condition it is possible to double the information content through the efficient bidirectional transfer of magnetization from the CO to its adjacent Cα and the Cα of the subsequent amino acid. We have incorporated this into a 3D experiment, a 3D-MIRROR-NCOCA, where correlations present in the 3D spectrum permit the sequential assignment of the protein backbone from a single experiment as we have demonstrated on a microcrystalline preparation of GB3. Furthermore, the low-power requirements of the MIRROR recoupling sequence facilitate the development of a low-power 3D-NCOCA experiment. This has enabled us to realise significant reductions in acquisition times, allowing the acquisition of a single 3D-NCOCA spectrum suitable for a full backbone resonance assignment of GB3 in less than 24 h.

Characterization of the Conjugation Pattern in Large Polysaccharide-Protein Conjugates by NMR Spectroscopy

Carbohydrate-based vaccines are among the safest and most effective vaccines and represent potent tools for prevention of life-threatening bacterial infectious diseases, like meningitis and pneumonia. The chemical conjugation of a weak antigen to protein as a source of T-cell epitopes generates a glycoconjugate vaccine that results more immunogenic. Several methods have been used so far to characterize the resulting polysaccharide-protein conjugates. However, a reduced number of methodologies has been proposed for measuring the degree of saccharide conjugation at the possible protein sites. Here we show that detailed information on large proteins conjugated with large polysaccharides can be achieved by a combination of solution and solid-state NMR spectroscopy. As a test case, a large protein assembly, l-asparaginase II, has been conjugated with Neisseria meningitidis serogroup C capsular polysaccharide and the pattern and degree of conjugation were determined.

Dynamic nuclear polarization for sensitivity enhancement in modern solid-state NMR

The field of dynamic nuclear polarization has undergone tremendous developments and diversification since its inception more than 6 decades ago. In this review we provide an in-depth overview of the relevant topics involved in DNP-enhanced MAS NMR spectroscopy. This includes the theoretical description of DNP mechanisms as well as of the polarization transfer pathways that can lead to a uniform or selective spreading of polarization between nuclear spins. Furthermore, we cover historical and state-of-the art aspects of dedicated instrumentation, polarizing agents, and optimization techniques for efficient MAS DNP. Finally, we present an extensive overview on applications in the fields of structural biology and materials science, which underlines that MAS DNP has moved far beyond the proof-of-concept stage and has become an important tool for research in these fields.

Radiofrequency fields in MAS solid state NMR probes

We present a detailed analysis of the radiofrequency (RF) field over full volume of a rotor that is generated in a solenoid coil. On top of the usually considered static distribution of amplitudes along the coil axis we describe dynamic radial RF inhomogeneities induced by sample rotation. During magic angle spinning (MAS), the mechanical rotation of the sample about the magic angle, a spin packet travels through areas of different RF fields and experiences periodical modulations of both the RF amplitude and the phase. These modulations become particularly severe at the end regions of the coil where the relative RF amplitude varies up to ±25% and the RF phase changes within ±30°. Using extensive numerical simulations we demonstrate effects of RF inhomogeneity on pulse calibration and for the ramped CP experiment performed at a wide range of MAS rates. In addition, we review various methods to map RF fields using a B₀ gradient along the sample (rotor axis) for imaging purposes. Under such a gradient, a nutation experiment provides directly the RF amplitude distribution, a cross polarization experiment images the correlation of the RF fields on the two channels according to the Hartmann-Hahn matching condition, while a spin-lock experiment allows to calibrate the RF amplitude employing the rotary resonance recoupling condition. Knowledge of the RF field distribution in a coil provides key to understand its effects on performance of a pulse sequence at the spectrometer and enables to set robustness requirements in the experimental design.

MAK33 antibody light chain amyloid fibrils are similar to oligomeric precursors

Little structural information is available so far on amyloid fibrils consisting of immunoglobulin light chains. It is not understood which features of the primary sequence of the protein result in fibril formation. We report here MAS solid-state NMR studies to identify the structured core of κ-type variable domain light chain fibrils. The core contains residues of the CDR2 and the β-strands D, E, F and G of the native immunoglobulin fold. The assigned core region of the fibril is distinct in comparison to the core identified in a previous solid-state NMR study on AL-09 by Piehl at. al, suggesting that V_L fibrils can adopt different topologies. In addition, we investigated a soluble oligomeric intermediate state, previously termed the alternatively folded state (AFS), using NMR and FTIR spectroscopy. The NMR oligomer spectra display a high degree of similarity when compared to the fibril spectra, indicating a high structural similarity of the two aggregation states. Based on comparison to the native state NMR chemical shifts, we suggest that fibril formation via domain-swapping seems unlikely. Moreover, we used our results to test the quality of different amyloid prediction algorithms.

3D MAS NMR Experiment Utilizing Through-Space 15N-15N Correlations

We demonstrate a novel 3D NNC magic angle spinning NMR experiment that generates ¹⁵N-¹⁵N internuclear contacts in protein systems using an optimized ¹⁵N-¹⁵N proton assisted recoupling (PAR) mixing period and a ¹³C dimension for improved resolution. The optimized PAR condition permits the acquisition of high signal-to-noise 3D data that enables backbone chemical shift assignments using a strategy that is complementary to current schemes. The spectra can also provide distance constraints. The utility of the experiment is demonstrated on an M₀Aβ_1-42 fibril sample that yields high-quality data that is readily assigned and interpreted. The 3D NNC experiment therefore provides a powerful platform for solid-state protein studies and is broadly applicable to a variety of systems and experimental conditions.

Cholesterol-mediated allosteric regulation of the mitochondrial translocator protein structure

Cholesterol is an important regulator of membrane protein function. However, the exact mechanisms involved in this process are still not fully understood. Here we study how the tertiary and quaternary structure of the mitochondrial translocator protein TSPO, which binds cholesterol with nanomolar affinity, is affected by this sterol. Residue-specific analysis of TSPO by solid-state NMR spectroscopy reveals a dynamic monomer–dimer equilibrium of TSPO in the membrane. Binding of cholesterol to TSPO's cholesterol-recognition motif leads to structural changes across the protein that shifts the dynamic equilibrium towards the translocator monomer. Consistent with an allosteric mechanism, a mutation within the oligomerization interface perturbs transmembrane regions located up to 35 Å away from the interface, reaching TSPO's cholesterol-binding motif. The lower structural stability of the intervening transmembrane regions provides a mechanistic basis for signal transmission. Our study thus reveals an allosteric signal pathway that connects membrane protein tertiary and quaternary structure with cholesterol binding.

The outer mitochondrial membrane translocator protein (TSPO) mediates several mitochondrial functions and binds cholesterol with a high affinity. Here the authors use solid-state NMR to show that cholesterol binding to TSPO results in allosteric changes that modulate TSPO oligomerization.

Amyloid Fibril Polymorphism: Almost Identical on the Atomic Level, Mesoscopically Very Different

Amyloid polymorphism of twisted and straight β-endorphin fibrils was studied by negative-stain transmission electron microscopy, scanning transmission electron microscopy, and solid-state nuclear magnetic resonance spectroscopy. Whereas fibrils assembled in the presence of salt formed flat, striated ribbons, in the absence of salt they formed mainly twisted filaments. To get insights into their structural differences at the atomic level, 3D solid-state NMR spectra of both fibril types were acquired, allowing the detection of the differences in chemical shifts of ¹³C and ¹⁵N atoms in both preparations. The spectral fingerprints and therefore the chemical shifts are very similar for both fibril types. This indicates that the monomer structure and the molecular interfaces are almost the same but that these small differences do propagate to produce flat and twisted morphologies at the mesoscopic scale. This finding is in agreement with both experimental and theoretical considerations on the assembly of polymers (including amyloids) under different salt conditions, which attribute the mesoscopic difference of flat versus twisted fibrils to electrostatic intermolecular repulsions.

Solid-state NMR sequential assignment of an Amyloid-β(1-42) fibril polymorph

The formation of fibrils of the amyloid-β (Aβ) peptide is considered to be a key event in the pathology of Alzheimer's disease (AD). The determination of a high-resolution structure of these fibrils is relevant for the understanding of the molecular basis of AD. In this work, we present the sequential resonance assignment of one of the polymorphs of Aβ(1-42) fibrils. We show that most of the protein is rigid, while a stretch of 4 residues (11-14) is not visible by solid-state NMR spectroscopy due to dynamics.

Solid-state NMR sequential assignment of the β-endorphin peptide in its amyloid form

Insights into the three-dimensional structure of hormone fibrils are crucial for a detailed understanding of how an amyloid structure allows the storage of hormones in secretory vesicles prior to hormone secretion into the blood stream. As an example for various hormone amyloids, we have studied the endogenous opioid neuropeptide β-endorphin in one of its fibril forms. We have achieved the sequential assignment of the chemical shifts of the backbone and side-chain heavy atoms of the fibril. The secondary chemical shift analysis revealed that the β-endorphin peptide adopts three β-strands in its fibril state. This finding fosters the amyloid nature of a hormone at the atomic level.