Precise Structural and Dynamical Details in Zeolites Revealed by Coupling-Edited 1H-17O Double Resonance NMR Spectroscopy

Despite the extensive industrial and research interests in zeolites, their intrinsic catalytic nature is not fully understood due to the complexity of the hydroxyl-aluminum moieties. 17O NMR would provide irreplaceable opportunities for much-needed fine structural determination given the ubiquitous presence of oxygen atoms in nearly all species; however, the low sensitivity and quadrupolar nature of oxygen-17 make its NMR spectroscopic elucidation challenging. Here, we show that state-of-the-art double resonance solid-state NMR techniques have been combined with spectral editing methods based on scalar (through-bond) and dipolar (through-space) couplings, which allowed us to address the subtle protonic structures in zeolites. Notably, the often-neglected and undesired second-order quadrupolar-dipolar cross-term interaction ("2nd-QD interaction") can actually be exploited and can help gain invaluable information. Eventually, a comprehensive set of 1H-17O/1H-27Al double resonance NMR with J-/D-coupling spectral editing techniques have been designed in this work and enabled us to reveal atomic-scale precise structural and dynamical details in zeolites including: 1) The jump rate of the bridging acid site (BAS) proton is relatively low, i.e., far less than 100 s-1 at room temperature. 2) The Al-OH groups with 1H chemical shift at 2.6-2.8 ppm, at least for nonseverely dealuminated H-ZSM-5 catalysts, exhibit a rigid bridging environment similar to that of BAS. 3) The Si-OH groups at 2.0 ppm are not hydrogen bonded and undergo fast cone-rotational motion. The results in this study predict the 2nd-QD interaction to be universal for any rigid -17O-H environment, such as those in metal oxide surfaces or biomaterials.

Xylene Synthesis Through Tandem CO2 Hydrogenation and Toluene Methylation Over a Composite ZnZrO Zeolite Catalyst

Selective synthesis of specific value-added aromatics from CO2 hydrogenation is of paramount interest for mitigating energy and climate problems caused by CO2 emission. Herein, we report a highly active composite catalyst of ZnZrO and HZSM-5 (ZZO/Z5-SG) for xylene synthesis from CO2 hydrogenation via a coupling reaction in the presence of toluene, achieving a xylene selectivity of 86.5 % with CO2 conversion of 10.5 %. A remarkably high space time yield of xylene could reach 215 mg gcat -1  h-1 , surpassing most reported catalysts for CO2 hydrogenation. The enhanced performance of ZZO/Z5-SG could be due to high dispersion and abundant oxygen vacancies of the ZZO component for CO2 adsorption, more feasible hydrogen activation and transfer due to the close interaction between the two components, and enhanced stability of the formate intermediate. The consumption of methoxy and methanol from the deep hydrogenation of formate by introduced toluene also propels an oriented conversion of CO2 .

[A case report of death from toxic encephalopathy caused by emamectin·chlorfenapyr]

Emamectin·chlorfenapyr is insecticide compounded by emamectin benzoate and chlorfenapyr. There is no special antidote after poisoning, and the mortality rate of patients is very high. We admitted a case of toxic encephalopathy caused by oral administration of emamectin·chlorfenapyr. The clinical manifestations of patient were gastrointestinal symptoms, profuse sweating, high fever, changes in consciousness. After admitted to the hospital, despite active comprehensive treatment, the patient died of ineffective rescue eventually.

Bistable Optoelectronic Properties Originated from the Scissoring Motion of the TEMPO Skeleton in Supramolecular Radical Ferroelectrics

Bistable materials with multiphysical channels, such as optical, electrical, and magnetic properties, have been paid dramatic attention due to their alternativity of the signal status in electronic devices. Herein, three stable supramolecular radicals ([(NH₃-TEMPO)(18-crown-6)][XF₆] (1, X = P; 2, X = As; 3, X = Sb)) were synthesized and characterized. The former two molecules present ferroelectric phase transitions around 381.7 and 382.7 K, respectively, with bistability in dielectric property and second-harmonic generation (SHG) effect, which are first found in supramolecular radicals. Their ferroelectric transition and bistable properties are generated from a net polar crystal structure owing to the static ordered packing of NH₃-TEMPO radical cations in the low-temperature phase (LTP) to a nonpolar structure owing to a distinctive symmetric scissoring motion of NH₃-TEMPO radical cations between two 18-crown-6 molecules in the high-temperature phase (HTP). Both of them exhibit paramagnetic properties in HTP and LTP states since no intermolecular spin-spin interaction occurs due to the long distances among the radicals in their crystals. These results make us possible to design bistable optoelectronic radical materials with bistability in magnetic property in the future.

Solid-State Synthesis of Aluminophosphate Zeotypes by Calcination of Amorphous Precursors

Because of the growing interest in the applications of zeolitic materials and the various challenges associated with traditional synthesis methods, the development of novel synthesis approaches remains of fundamental importance. Herein, we report a general route for the synthesis of aluminophosphate (AlPO) zeotypes by simple calcination of amorphous precursors at moderate temperatures (250-450 °C) for short reaction times (3-60 min). Accordingly, highly crystalline AlPO zeotypes with various topologies of AST, SOD, LTA, AEL, AFI, and -CLO, ranging from ultra-small to extra-large pores, have been successfully synthesized. Multinuclear multidimensional solid-state NMR techniques combined with complementary operando mass spectrometry (MS), powder X-ray diffraction, high-resolution transmission electron microscopy, and Raman characterizations reveal that covalently bonded fluoride in the intermediates catalyze the bond breaking and remaking processes. The confined organic structure-directing agents with high thermal stability direct the ordered rearrangement. This novel synthesis strategy not only shows excellent synthesis efficiency in terms of a simple synthesis procedure, a fast crystallization rate, and a high product yield, but also sheds new light on the crystallization mechanism of zeolitic materials.

Ultrafast Magic Angle Spinning Solid-State NMR Spectroscopy: Advances in Methodology and Applications

Solid-state NMR spectroscopy is one of the most commonly used techniques to study the atomic-resolution structure and dynamics of various chemical, biological, material, and pharmaceutical systems spanning multiple forms, including crystalline, liquid crystalline, fibrous, and amorphous states. Despite the unique advantages of solid-state NMR spectroscopy, its poor spectral resolution and sensitivity have severely limited the scope of this technique. Fortunately, the recent developments in probe technology that mechanically rotate the sample fast (100 kHz and above) to obtain "solution-like" NMR spectra of solids with higher resolution and sensitivity have opened numerous avenues for the development of novel NMR techniques and their applications to study a plethora of solids including globular and membrane-associated proteins, self-assembled protein aggregates such as amyloid fibers, RNA, viral assemblies, polymorphic pharmaceuticals, metal-organic framework, bone materials, and inorganic materials. While the ultrafast-MAS continues to be developed, the minute sample quantity and radio frequency requirements, shorter recycle delays enabling fast data acquisition, the feasibility of employing proton detection, enhancement in proton spectral resolution and polarization transfer efficiency, and high sensitivity per unit sample are some of the remarkable benefits of the ultrafast-MAS technology as demonstrated by the reported studies in the literature. Although the very low sample volume and very high RF power could be limitations for some of the systems, the advantages have spurred solid-state NMR investigation into increasingly complex biological and material systems. As ultrafast-MAS NMR techniques are increasingly used in multidisciplinary research areas, further development of instrumentation, probes, and advanced methods are pursued in parallel to overcome the limitations and challenges for widespread applications. This review article is focused on providing timely comprehensive coverage of the major developments on instrumentation, theory, techniques, applications, limitations, and future scope of ultrafast-MAS technology.

[Application of transbronchial cryobiopsy in the diagnosis of postoperative complications after lung transplantation: a report of 6 cases]

Objective: To investigate the efficacy and safety of transbronchial cryobiopsy (TBCB) after lung transplantation. Methods: The clinical characteristics, TBCB procedure, diagnosis and treatment, and outcomes of lung transplant recipients of 6 patients (all male, aged 33-67 years) with TBCB in China-Japan Friendship Hospital from May to November 2021 were retrospectively analyzed. Results: Among the 6 patients diagnosed by TBCB, there were 2 cases of organizing pneumonia, 1 acute cellular rejection, 1 antibody-mediated rejection, and 1 bronchiolitis obliterans, and 1 diffuse alveolar damage. After the clinical diagnosis was confirmed, the condition improved after adjustment of the treatments followed. There were no serious complications related to the TBCB procedure. Conclusion: TBCB is valuable and relatively safe in the diagnosis of complications after lung transplantation, but the indications need to be strictly controlled.

Supercycled R-symmetry sequences for robust heteronuclear polarization transfer in solid-state NMR

Herein, we introduce supercycle of R-symmetry sequences (SR-sequences) and incomplete supercycle schemes of R-symmetry sequences (iSR-I- and iSR-II-sequences) to improve the robustness of PRESTO for heteronuclear polarization transfer in MAS NMR. The constructions of SR- and iSR-I/II- sequences are based on the different phase-inverted supercycles of R-symmetry sequences, and such supercycles can suppress the influence of CSA, resonance offset and RF mismatch when incorporated into the PRESTO method. Moreover, the SR- and iSR-II-sequences are more efficient in suppressing the interference of homonuclear dipolar coupling. The improved robustness of SR-, iSR-I- and iSR-II-PRESTO over the original R-PRESTO has been verified by numerical simulations and NMR experiments on NH₄H₂PO₄ and gamma-alumina at fast MAS conditions. It is also important to note that the SR- and iSR-II-PRESTO can greatly lengthen the transverse relaxation times and lead to much higher polarization transfer efficiency compared to R-PRESTO, thanks to their superior tolerance to RF inhomogeneity and homonuclear dipolar coupling.

Chemistry of Ketene Transformation to Gasoline Catalyzed by H-SAPO-11

Although ketene has been proposed to be an active intermediate in a number of reactions including OXZEO (metal oxide-zeolite)-catalyzed syngas conversion, dimethyl ether carbonylation, methanol to hydrocarbons, and CO₂ hydrogenation, its chemistry and reaction pathway over zeolites are not well understood. Herein, we study the pathway of ketene transformation to gasoline range hydrocarbons over the molecular sieve H-SAPO-11 by kinetic analysis, in situ infrared spectroscopy, and solid-state nuclear magnetic resonance spectroscopy. It is demonstrated that butene is the reaction intermediate on the paths toward gasoline products. Ketene transforms to butene on the acid sites via either acetyl species following an acetic acid ketonization pathway or acetoacetyl species with keto-enol tautomerism following an acetoacetic acid decarboxylation pathway when in the presence of water. This study reveals experimentally for the first time insights into ketene chemistry in zeolite catalysis.

Multilevel Hollow Phenolic Resin Nanoreactors with Precise Metal Nanoparticles Spatial Location toward Promising Heterogeneous Hydrogenations

Hollow nanostructures with fascinating properties have inspired numerous interests in broad research fields. Cell-mimicking complex hollow architectures with precise active components distributions are particularly important, while their synthesis remains highly challenging. Herein, a "top-down" chemical surgery strategy is introduced to engrave the 3-aminophenol formaldehyde resin (APF) spheres at nanoscale. Undergoing the cleavage of (Ar)CN bonds with ethanol as chemical scissors and subsequent repolymerization process, the Solid APF transform to multilevel hollow architecture with precise nanospatial distribution of organic functional groups (e.g., hydroxymethyl and amine). The transformation is tracked by electron microscopy and solid-state nuclear magnetic resonance techniques, the category and dosage of alcohol are pivotal for constructing multilevel hollow structures. Moreover, it is demonstrated the evolution of nanostructures accompanied with unique organic microenvironments is able to accurately confine multiple gold (Au) nanoparticles, leading to the formation of pomegranate-like particles. Through selectively depositing palladium (Pd) nanoparticles onto the outer shell, bimetallic Au@APF@Pd catalysts are formed, which exhibit excellent hydrogenation performance with turnover frequency (TOF) value up to 11257 h^-1 . This work provides an effective method for precisely manipulating the nanostructure and composition of polymers at nanoscale and sheds light on the design of catalysts with precise spatial active components.

Pseudo-resonance structures in chiral alcohols and amines and their possible aggregation states

We now report that some chiral compounds, like alcohols, which are not sterically hindered atropisomers nor epimer mixtures, exhibit two sets of simultaneous NMR spectra in CDCl₃. Some other chiral alcohols also simultaneously exhibit two different NMR spectra in the solid state because two different conformers, A and B had different sizes because their corresponding bond lengths and angles are different. These structures were confirmed in the same solid state by X-ray. We designate these as pseudo-resonance for a compound exhibiting several different corresponding lengths that simultaneously coexist in the solid state or liquid state. Variable-temperature NMR, 2D NMR methods, X-ray, neutron diffraction, IR, photo-luminesce (PL) and other methods were explored to study whether new aggregation states caused these heretofore unknown pseudo-resonance structures. Finally, eleven chiral alcohols or diols were found to co-exist in pseudo-resonance structures by X-ray crystallography in a search of the CDS database.

Elastic Lattice Enabling Reversible Tetrahedral Li Storage Sites in a High-Capacity Manganese Oxide Cathode

The key to breaking through the capacity limitation imposed by intercalation chemistry lies in the ability to harness more active sites that can reversibly accommodate more ions (e.g., Li⁺ ) and electrons within a finite space. However, excessive Li-ion insertion into the Li layer of layered cathodes results in fast performance decay due to the huge lattice change and irreversible phase transformation. In this study, an ultrahigh reversible capacity is demonstrated by a layered oxide cathode purely based on manganese. Through a wealth of characterizations, it is clarified that the presence of low-content Li₂ MnO₃ domains not only reduces the amount of irreversible O loss; but also regulates Mn migration in LiMnO₂ domains, enabling elastic lattice with high reversibility for tetrahedral sites Li-ion storage in Li layers. This work utilizes bulk cation disorder to create stable Li-ion-storage tetrahedral sites and an elastic lattice for layered materials, with a reversible capacity of 600 mA h g^-1 , demonstrated in th range 0.6-4.9 V versus Li/Li⁺ at 10 mA g^-1 . Admittedly, discharging to 0.6 V might be too low for practical use, but this exploration is still of great importance as it conceptually demonstrates the limit of Li-ions insertion into layered oxide materials.

Nature of Five-Coordinated Al in γ-Al2O3 Revealed by Ultra-High-Field Solid-State NMR

Five-coordinated Als (Al(V)) on the surface of aluminas play important roles when they are used as catalysts or catalyst supports. However, the comprehensive characterization and understanding of the intrinsic structural properties of the Al(V) remain a challenge, due to the very small amount in commonly used aluminas. Herein, the surface structures of γ-Al₂O₃ and Al(V)-rich Al₂O₃ nanosheets (Al₂O₃-NS) have been investigated and compared in detail by multinuclear high-field solid-state NMR. Thanks to the high resolution and sensitivity of ultra-high-field (up to 35.2 T) NMR, the arrangements of surface Als were clearly demonstrated, which are substantially different from the bulk phase in γ-Al₂O₃ due to the structure reconstruction. It reveals for the first time that most of the commonly observed Al(V)s tend to exist as aggregated states on the surface of γ-Al₂O₃, like those in amorphous Al₂O₃-NS liable to structure reconstruction. Our new insights into surface Al(V) species may help in understanding the structure-function relationship of alumina.

Quantitatively Mapping the Distribution of Intrinsic Acid Sites in Mordenite Zeolite by High-Field 23Na Solid-State Nuclear Magnetic Resonance

It is of great significance to accurately quantify the Brønsted acid sites (BASs) at different positions of mordenite (MOR) zeolite. However, H-MOR obtained from Na-MOR can hardly avoid dealumination under hydrothermal conditions, which causes difficulty in the acid characterization. Herein, 23Na-27Al D-HMQC was performed combined with high-field 23Na MQ MAS NMR and DFT calculation, which provided an unambiguous attribution of the 23Na chemical shifts and further helped to improve the resolution of 27Al MAS NMR. By fitting the 23Na and 1H MAS NMR spectra of Na/H-MOR, the intrinsic BAS contents in different T-sites were measured by characterizing the location and content of sodium ions. These Na/H-MOR zeolites with various acid distributions were used for DME carbonylation and showed that the amount of BASs in the T3 site was proportional to the activity of carbonylation. This study provides a new method for investigating the intrinsic acid properties of zeolites.

77Se-13C based dipolar correlation experiments to map selenium sites in microcrystalline proteins

Sulfur-containing sites in proteins are of great importance for both protein structure and function, including enzymatic catalysis, signaling pathways, and recognition of ligands and protein partners. Selenium-77 is an NMR active spin-1/2 nucleus that shares many physiochemical properties with sulfur and can be readily introduced into proteins at sulfur sites without significant perturbations to the protein structure. The sulfur-containing amino acid methionine is commonly found at protein-protein or protein-ligand binding sites. Its selenium-containing counterpart, selenomethionine, has a broad chemical shift dispersion useful for NMR-based studies of complex systems. Methods such as (¹H)-⁷⁷Se-¹³C double cross polarization or {⁷⁷Se}-¹³C REDOR could be valuable to map the local environment around selenium sites in proteins but have not been demonstrated to date. In this work, we explore these dipolar transfer mechanisms for structural characterization of the GB1 V39SeM variant of the model protein GB1 and demonstrate that ⁷⁷Se-¹³C based correlations can be used to map the local environment around selenium sites in proteins. We have found that the general detection limit is ~ 5 Å, but longer range distances up to ~ 7 Å can be observed as well. This study establishes a framework for the future characterization of selenium sites at protein-protein or protein-ligand binding interfaces.

Percutaneous CT-Guided Microwave Ablation Combined with Vertebral Augmentation for Treatment of Painful Spinal Metastases

BACKGROUND AND PURPOSE

Percutaneous thermal ablation followed by vertebral augmentation is an emerging minimally invasive therapeutic alternative for the management of spinal metastases. This study aimed to retrospectively evaluate the effectiveness and safety of microwave ablation combined with vertebral augmentation for the treatment of painful vertebral metastases.

MATERIALS AND METHODS

Overall, 91 patients with 140 metastatic vertebrae who experienced refractory moderate-to-severe pain were treated with CT-guided microwave ablation and vertebral augmentation. Procedural effectiveness was determined using the visual analog scale, daily morphine consumption, and the Oswestry Disability Index preprocedurally and during follow-up. Local tumor control was assessed at follow-up imaging.

RESULTS

The procedure was technically successful in all patients. The median visual analog scale score and mean morphine dose were 6 (range, 4-10) and 77.8 (SD, 31.5) mg (range, 15-143 mg), preprocedurally; 5 (range 3-8) and 34.5 (SD, 23.8) mg (range, 0-88 mg) at 3 days; 4 (range, 2-7) and 28.7 (SD, 16.4) mg (range, 0-73 mg) at 1 week; 3 (range, 1-6) and 24.6 (SD, 13.2) mg (range, 0-70 mg) at 1 month; 3 (range, 1-6) and 21.70 (SD, 10.0) mg (range, 0-42 mg) at 3 months; and 3 (range, 1-8) and 21.0 (SD, 9.9) mg (range, 0-46 mg) at 6 months postprocedurally (all P < .05). A decrease in the Oswestry Disability Index score was also observed (P < .01). Local control was achieved in 94.8% of the treated metastatic vertebrae during the 6-month follow-up period. Asymptomatic cement leakage occurred in 42 (30%) treated vertebrae. A grade 3 neural injury was observed in 1 patient (1.1%). The patient's neurologic function returned to normal following treatment with mannitol, glucocorticoids, and radiation therapy.

CONCLUSIONS

This study demonstrates that percutaneous CT-guided microwave ablation combined with vertebral augmentation is a safe and effective minimally invasive intervention for the treatment of painful spinal metastases.

Serum Metabolic Fingerprints on Bowl-Shaped Submicroreactor Chip for Chemotherapy Monitoring

Chemotherapy is a primary cancer treatment strategy, the monitoring of which is critical to enhancing the survival rate and quality of life of cancer patients. However, current chemotherapy monitoring mainly relies on imaging tools with inefficient sensitivity and radiation invasiveness. Herein, we develop the bowl-shaped submicroreactor chip of Au-loaded 3-aminophenol formaldehyde resin (denoted as APF-bowl&Au) with a specifically designed structure and Au loading content. The obtained APF-bowl&Au, used as the matrix of laser desorption/ionization mass spectrometry (LDI MS), possesses an enhanced localized electromagnetic field for strengthened small metabolite detection. The APF-bowl&Au enables the extraction of serum metabolic fingerprints (SMFs), and machine learning of the SMFs achieves chemotherapy monitoring of ovarian cancer with area-under-the-curve (AUC) of 0.81-0.98. Furthermore, a serum metabolic biomarker panel is preliminarily identified, exhibiting gradual changes as the chemotherapy cycles proceed. This work provides insights into the development of nanochips and contributes to a universal detection platform for chemotherapy monitoring.

Transcriptome and metabolome analyses of the immune response to light stress in the hybrid grouper (Epinephelus lanceolatus ♂ × Epinephelus fuscoguttatus ♀)

Light intensity is an important environmental factor that affects fish growth and health through multiple physiological activities and metabolism and eventually impacts aquaculture harvest. There is a need to evaluate the fish stress response to light intensities, which will benefit aquaculture. Here, hybrid grouper (Epinephelus lanceolatus ♂ × Epinephelus fuscoguttatus ♀) was treated with three light intensities for evaluation of the light stress response, including high light intensity (1 250 lx), low light intensity (10 lx) and moderate light intensity (250 lx). Transcriptome analysis showed that a total of 71 318 unigene sequences were obtained with an N50 of 2 589 bp. Compared to the control group (250 lx), 1 697 differentially expressed genes (DEGs), a considerable quantity, were detected in the 1 250 lx group. Among those genes, 548 were upregulated, and the remaining 149 genes showed decreased expression. Comparatively small numbers of DEGs were detected in the 10 lx group; 54 out of 103 genes exhibited upregulated expression, and 49 genes showed downregulation. For further KEGG analysis, 82 DEGs were enriched in nine common signalling pathways in immunity, of which 73 DEGs were significantly inhibited in the 1 250 lx group. In contrast, only 11 DEGs were enriched in three immunity pathways, with nine DEGs showing a significant increase in the 10 lx group. The metabolome analysis revealed 59 and 44 differential metabolites (DMs) from the 1 250 lx and 10 lx groups, respectively. Of note, those DMs from the 1 250 lx-treated group were tendentiously involved in amino acid metabolism and lipid metabolism pathways, while the purine metabolism, amino acid metabolism and lipid metabolism pathways were mostly found in the 10 lx treatment group. In summary, our data indicated that high light intensity significantly inhibited the immune response in hybrid grouper, while low light intensity presented low stimulation of immune activity. In addition, both high and low light intensity could inhibit protein synthesis and amino acid metabolism. Taken together, hybrid grouper exhibited a much milder stress response to low light intensity than to high light intensity.

Solid-State NMR Dipolar and Chemical Shift Anisotropy Recoupling Techniques for Structural and Dynamical Studies in Biological Systems

With the development of NMR methodology and technology during the past decades, solid-state NMR (ssNMR) has become a particularly important tool for investigating structure and dynamics at atomic scale in biological systems, where the recoupling techniques play pivotal roles in modern high-resolution MAS NMR. In this review, following a brief introduction on the basic theory of recoupling in ssNMR, we highlight the recent advances in dipolar and chemical shift anisotropy recoupling methods, as well as their applications in structural determination and dynamical characterization at multiple time scales (i.e., fast-, intermediate-, and slow-motion). The performances of these prevalent recoupling techniques are compared and discussed in multiple aspects, together with the representative applications in biomolecules. Given the recent emerging advances in NMR technology, new challenges for recoupling methodology development and potential opportunities for biological systems are also discussed.

Achieving long cycle life for all-solid-state rechargeable Li-I2 battery by a confined dissolution strategy

Rechargeable Li-I₂ battery has attracted considerable attentions due to its high theoretical capacity, low cost and environment-friendliness. Dissolution of polyiodides are required to facilitate the electrochemical redox reaction of the I₂ cathode, which would lead to a harmful shuttle effect. All-solid-state Li-I₂ battery totally avoids the polyiodides shuttle in a liquid system. However, the insoluble discharge product at the conventional solid interface results in a sluggish electrochemical reaction and poor rechargeability. In this work, by adopting a well-designed hybrid electrolyte composed of a dispersion layer and a blocking layer, we successfully promote a new polyiodides chemistry and localize the polyiodides dissolution within a limited space near the cathode. Owing to this confined dissolution strategy, a rechargeable and highly reversible all-solid-state Li-I₂ battery is demonstrated and shows a long-term life of over 9000 cycles at 1C with a capacity retention of 84.1%.

A mechanistic study of syngas conversion to light olefins over OXZEO bifunctional catalysts: insights into the initial carbon–carbon bond formation on the oxide

NMR experiments reveal a mechanism of syngas conversion in which CO reacts with OCH3 on the oxide surface, generating ketene intermediates, which can either form acetate or diffuse into zeolite.

Bi/Trinuclear Pt1&2Cu Clusters Assembly from Isolated Metal Atoms

We report a facile strategy in synthesizing uniform heterometallic bi/tri-atom clusters starting from mono-metallic atoms in liquid phase. Specifically, Pt1&2Cu bi/tri-atoms are prepared by reducing CuCl2 at preformed Pt1 atoms...

Unraveling the Surface Hydroxyl Network on In2O3 Nanoparticles with High-Field Ultrafast Magic Angle Spinning Nuclear Magnetic Resonance Spectroscopy

Hydroxyl groups are among the major active surface sites over metal oxides. However, their spectroscopic characterizations have been challenging due to limited resolutions, especially on hydroxyl-rich surfaces where strong hydroxyl networks are present. Here, using nanostructured In₂O₃ as an example, we show significantly enhanced discrimination of the surface hydroxyl groups, owing to the high-resolution ¹H NMR spectra performed at a high magnetic field (18.8 T) and a fast magic angle spinning (MAS) of up to 60 kHz. A total of nine kinds of hydroxyl groups were distinguished and their assignments (μ₁, μ₂, and μ₃) were further identified with the assistance of ¹⁷O NMR. The spatial distribution of these hydroxyl groups was further explored via two-dimensional (2D) ¹H-¹H homonuclear correlation experiments with which the complex surface hydroxyl network was unraveled at the atomic level. Moreover, the quantitative analysis of these hydroxyl groups with such high resolution enables further investigations into the physicochemical property and catalytic performance characterizations (in CO₂ reduction) of these hydroxyl groups. This work provides insightful understanding on the surface structure/property of the In₂O₃ nanoparticles and, importantly, may prompt general applications of high-field ultrafast MAS NMR techniques in the study of hydroxyl-rich surfaces on other metal oxide materials.

89Y chemical shift anisotropy: a sensitive structural probe of layered yttrium hydroxides revealed by solid-state NMR spectroscopy and DFT calculations

Anion-exchangeable Y₂(OH)₅X·nH₂O (LYH-X, X = monovalent anions, n ≈ 1.5) materials are an ideal platform for incorporating the unique properties of layered metal hydroxides and rare-earth (RE) ions, and thus have exhibited promising prospects for various applications. To further improve the performance of LYH-X and related functional materials, their structure-property relationships must be explored. However, due to the intrinsic felxibility, extracting the local structural details of these materials is particularly challenging. In this work, we utilized a combined approach of ⁸⁹Y solid-state NMR (ssNMR) spectroscopy and density functional theory (DFT) calculations to reveal the response of ⁸⁹Y chemical shift anisotropy (CSA) in LYH-X to the structural changes including a small displacement of cationic yttrium hydroxide layers and intercalated anions. Such subtle structural changes are often associated with dehydration/rehydration, anion-exchange, exfoliation, and the self-assembly process of LYH-X and related functional materials, which are exceedingly difficult to detect using other techniques. The principal components of ⁸⁹Y CSA show a larger variation range than isotropic chemical shifts, making CSA a more sensitive probe. In addition, it is found that the response of ⁸⁹Y CSA to structural changes is distinct for Y sites with different local coordination environments, opening great opportunities to analyze each Y site within these materials. All these observations suggest that the strategy involving both experimental (⁸⁹Y ssNMR) and theoretical (DFT) approaches can be utilized to extract previously unavailable ultrafine structural information of LYH-X and related materials, and provide fruitful insights into their thorough structure-property relationships.

Enhanced Fluoride Uptake by Layered Double Hydroxides under Alkaline Conditions: Solid-State NMR Evidence of the Role of Surface >MgOH Sites

Layered double hydroxides (LDHs) are potential low-cost filter materials for use in fluoride removal from drinking water, but molecular-scale defluoridation mechanisms are lacking. In this research, we employed ¹⁹F solid-state NMR spectroscopy to identify fluoride sorption products on 2:1 MgAl LDH and to reveal the relationship between fluoride sorption and the LDH structure. A set of six ¹⁹F NMR peaks centered at -140, -148, -156, -163, -176, and -183 ppm was resolved. Combining quantum chemical calculations based on density function theory (DFT) and ¹⁹F{²⁷Al} transfer of populations in double resonance (TRAPDOR) analysis, we could assign the peaks at -140, -148, -156, and -163 ppm to Al-F (F coordinated to surface Al) and those at -176 and -183 ppm to Mg-F (F coordinated to surface Mg only). Interestingly, the spectroscopic data reveal that the formation of Al-F is the predominant mode of F^- sorption at low pH, whereas the formation of Mg-F is predominant at high pH (or a higher Mg/Al ratio). This finding supports the fact that the F^- uptake of 2:1 MgAl LDH was nearly six times that of activated alumina at pH 9. Overall, we explicitly revealed the different roles of the surface >MgOH and >AlOH sites of LDHs in defluoridation, which explained why the use of classic activated alumina for defluoridation is limited at high pH. The findings from this research may also provide new insights into material screening for potential filters for F^- removal under alkaline conditions.

Photochemical bromination and iodination of peptides and proteins by photoexcitation of aqueous halides

Although halogen atoms can greatly improve the stability, selectivity, and bioactivity of proteins, direct halogenation of proteins or peptides by chemical strategy has been never achieved. Herein, we describe the developments of direct photochemical bromination and iodization of unprotected proteins and peptides in the direct irradiation device and the single-pulsed irradiation capillary reactor with biocompatible aqueous halides Br^- and I^-, respectively. These novel photochemical modifications are triggered by 193 nm laser photoexcitation of commonly photo-inert halide ions to form active radical species. High protein modification efficiency (>90%) can be achieved under just 10 ns ultra-short irradiation of a single pulse of laser shot while the compact native protein structure could be largely retained. The specifically modified residues are Tyr, His, Trp for bromination and Tyr, His for iodization. The photochemical halogenation sites and rates are highly selective to protein native structures, providing dynamic insights into protein structure alterations and protein-drug interfaces in human serum protein (HSA)-warfarin interaction. This novel 193 nm photochemical strategy opens new opportunities for the protein structure-function explorations.

The Role of Organic and Inorganic Structure-Directing Agents in Selective Al Substitution of Zeolite

Organic and inorganic structure-directing agents (SDAs) impact Al distributions in zeolite, but the insights into how SDAs manipulate Al distribution have not been elucidated yet. Herein, the roles of different SDAs such as cyclohexylamine (CHA), hexamethylenimine (HMI), and Na⁺ in selective Al substitution of MCM-49 zeolite are investigated comprehensively by multinuclear solid-state NMR. The results demonstrate that MCM-49 synthesized with HMI shows relatively more T₆ and T₇ Al, while more T₂ Al is observed using CHA. The formation of T₂ Al in both MCM-49(HMI) and MCM-49(CHA) is derived from Na⁺, while protonated HMIs show bias in incorporation of T₆ and T₇ Al. Most HMIs are occluded in protonated status, and about half of CHAs are occluded in nonprotonated status. The close spatial proximity between nonprotonated CHAs and Na⁺ synergistically promotes the formation of zeolite structure, leading to more Na⁺ ions occluded in the zeolite channel with preferential T₂ Al substitution.

A novel aggregation-induced enhanced emission aromatic molecule: 2-aminophenylboronic acid dimer

Aggregation-induced enhanced emission (AIEE) molecules have significant applications in optoelectronics, biomedical probes and chemical sensors, and large amounts of AIEE molecules have been reported since the concept of AIEE was proposed. Most aromatic AIEE molecules have complex structures consisting of multiple aromatic rings and/or polycyclic skeletons. In this study, we find that 2-aminophenylboronic acid (2-APBA) with a simple structure is highly emissive in the solid state. Further studies reveal that 2-APBA exists in a dimeric form, and the 2-APBA dimer is a novel AIEE molecule. The underlying AIEE mechanism is that the 2-APBA dimeric units aggregate through intermolecular interactions to produce highly ordered molecular packing without the presence of π–π stacking interactions that would lead to aggregation-caused quenching. Furthermore, the 2-APBA dimer aggregates could reversibly transform into its non-fluorescent monomer form driven by new kinds of dynamic covalent B–N and B–O bonds, illustrating its good potential in molecular recognition, nanogating, chemo/bio-sensing and controlled drug release.

The 2-APBA dimer tending to aggregate into a highly ordered structure is discovered to be AIEE active. Through alternate treatment with CO₂ and N₂, 2-APBA can switch between monomer and dimer aggregates driven by dynamic covalent B–N and B–O bonds.

Accurate heteronuclear distance measurements at all magic-angle spinning frequencies in solid-state NMR spectroscopy

Heteronuclear dipolar coupling is indispensable in revealing vital information related to the molecular structure and dynamics, as well as intermolecular interactions in various solid materials. Although numerous approaches have been developed to selectively reintroduce heteronuclear dipolar coupling under MAS, most of them lack universality and can only be applied to limited spin systems. Herein, we introduce a new and robust technique dubbed phase modulated rotary resonance (PMRR) for reintroducing heteronuclear dipolar couplings while suppressing all other interactions under a broad range of MAS conditions. The standard PMRR requires the radiofrequency (RF) field strength of only twice the MAS frequency, can efficiently recouple the dipolar couplings with a large scaling factor of 0.50, and is robust to experimental imperfections. Moreover, the adjustable window modification of PMRR, dubbed wPMRR, can improve its performance remarkably, making it well suited for the accurate determination of dipolar couplings in various spin systems. The robust performance of such pulse sequences has been verified theoretically and experimentally via model compounds, at different MAS frequencies. The application of the PMRR technique was demonstrated on the H-ZSM-5 zeolite, where the interaction between the Brønsted acidic hydroxyl groups of H-ZSM-5 and the absorbed trimethylphosphine oxide (TMPO) were probed, revealing the detailed configuration of super acid sites.

Induced Active Sites by Adsorbate in Zeotype Materials

There has been a long debate on how and where active sites are created for molecular adsorption and catalysis in zeolites, which underpin many important industrial applications. It is well accepted that Lewis acidic sites (LASs) and basic sites (LBSs) as active sites in pristine zeolites are generally believed to be the extra-framework Al species and residue anion (OH^-) species formed at fixed crystallographic positions after their synthesis. However, the dynamic interactions of adsorbates/reactants with pristine zeotype materials to "create" sites during real conditions remain largely unexplored. Herein, direct experimental observation of the establishment of induced active sites in silicoaluminophosphate (SAPO) by an adsorbate is for the first time made, which contradicts the traditional view of the fixed active sites in zeotype materials. Evidence shows that an induced frustrated Lewis pair (FLP, three-coordinated framework Al as LAS and SiO (H) as LBS) can be transiently favored for heterolytic molecular binding/reactions of competitive polar adsorbates due to their ineffective orbital overlap in the rigid framework. High-resolution magic-angle-spinning solid-state NMR, synchrotron X-ray diffraction, neutron powder diffraction, in situ diffuse reflectance infrared Fourier transform spectroscopy, and ab initio molecular dynamics demonstrate the transformation of a typical Brønsted acid site (Al(OH)Si) in SAPO zeolites to new induced FLP structure for hetereolytic binding upon adsorption of a strong polar adsorbate. Our unprecedented finding opens up a new avenue to understanding the dynamic establishment of active sites for adsorption or chemical reactions under molecular bombardment of zeolitic structures.

Recent progress in dipolar recoupling techniques under fast MAS in solid-state NMR spectroscopy

With the recent advances in NMR hardware and probe design technology, magic-angle spinning (MAS) rates over 100 ​kHz are accessible now, even on commercial solid NMR probes. Under such fast MAS conditions, excellent spectral resolution has been achieved by efficient suppression of anisotropic interactions, which also opens an avenue to the proton-detected NMR experiments in solids. Numerous methods have been developed to take full advantage of fast MAS during the last decades. Among them, dipolar recoupling techniques under fast MAS play vital roles in the determination of the molecular structure and dynamics, and are also key elements in multi-dimensional correlation NMR experiments. Herein, we review the dipolar recoupling techniques, especially those developed in the past two decades for fast-to-ultrafast MAS conditions. A major focus for our discussion is the ratio of RF field strength (in frequency) to MAS frequency, ν₁/ν_r, in different pulse sequences, which determines whether these dipolar recoupling techniques are suitable for NMR experiments under fast MAS conditions. Systematic comparisons are made among both heteronuclear and homonuclear dipolar recoupling schemes. In addition, the schemes developed specially for proton-detection NMR experiments under ultrafast MAS conditions are highlighted as well.

Acidity and Local Confinement Effect in Mordenite Probed by Solid-State NMR Spectroscopy

Herein, utilizing acetonitrile as the probe molecule, the acidity and host-guest interactions of H-mordenite (H-MOR) zeolites are investigated comprehensively by solid-state NMR spectroscopy and theoretical calculation. The locations and local configurations of Brønsted acid sites (BASs) in H-MOR are revealed by multinuclear and multidimensional NMR experiments with adsorption/coadsorption of acetonitrile (CD₃CN) and trimethylphosphine (TMP). Moreover, the confinement effect of dual pores in MOR has been characterized via the quantitative determination of host-guest interactions between CH₃CN and BASs. The ¹H-¹⁵N dipolar measurement results and DFT calculations demonstrate that there are two kinds of acetonitrile molecules adsorbed in 12-membered ring (12MR) main channels with distinct mobility, where acetonitrile undergoes either partially restricted or highly flexible motion in the time scale of nanoseconds to microseconds. These two types of acetonitrile can exchange with temperature rising. In contrast, the mobility of acetonitrile in 8-membered ring (8MR) channels is very restricted due to the confinement of the framework.

Selective synthesis of para-xylene and light olefins from CO2/H2 in the presence of toluene

para-xylene and light olefins are co-produced in CO₂ hydrogenation in the presence of toluene over OXZEO composite catalyst.

Atomic-resolution structure of HIV-1 capsid tubes by magic-angle spinning NMR

HIV-1 capsid plays multiple key roles in viral replication, and inhibition of capsid assembly is an attractive target for therapeutic intervention. Here, we report the atomic-resolution structure of the capsid protein (CA) tubes, determined by magic-angle-spinning NMR and data-guided molecular dynamics simulations. Functionally important regions, including the NTD β-hairpin, the cyclophilin A loop, residues in the hexamer center pore, and the NTD-CTD linker region, are well defined. The structure of individual CA chains, their arrangement in the pseudo-hexameric units of the tube and the inter-hexamer interfaces are consistent with those in intact capsid cores and substantially different from the organization in crystal structures, which featured flat hexamers. The inherent curvature in the CA tubes is controlled by conformational variability of residues in the linker region and of dimer and trimer interfaces. The present structure reveals atomic-level detail into capsid architecture and provides important guidance for the design of novel capsid inhibitors.

Revisiting of Tetragonal NaVPO4F: A High Energy Density Cathode for Sodium-Ion Batteries

Tetragonal NaVPO₄F has been regarded as an ideal cathode for sodium-ion batteries because of its high average plateau (3.8 V) and theoretical specific capacity (143 mA h g^-1). However, the Na-storage performance is still hindered by unsatisfying thermal stability and poor conductivity. Herein, a stable tetragonal NaVPO₄F has been synthesized by a novel solvent thermal method using a carbon coating precursor. The as-prepared NaVPO₄F@C nanocomposite delivers a capacity of 133 mA h g^-1 at 0.2 C, corresponding to an excellent energy density of 509 W h kg^-1; when coupled with an HC anode, the full cell still displays an outstanding performance of 124 mA h g^-1 at 0.05 C. Fast Na⁺ diffusion kinetics (D^Na+ = 10^-12 to 10^-10 cm² s^-1) and small volume change (4.4%) are exploited, which ensures good rate trait and cycling stability of tetragonal NaVPO₄F. Further, the Na⁺ extraction-insertion mechanism has been explored by analyzing the crystal structure change during in situ X-ray powder diffraction cycles.

Synthesis of Colloidal Mesoporous Silica Spheres with Large Through-Holes on the Shell

Colloidal silica spheres with controllable large through-holes and mesopores on the shell were synthesized by using polystyrene (PS) spheres as a hard template and cationic surfactant hexadecyl trimethylammonium bromide (CTAB) as a soft template. Through modulating the synthetic conditions, including the volume ratio of ethanol (EtOH)/water, the amount of ammonia hydroxide, and the dosage of CTAB, SiO₂ spheres can transform among hollow structure, through-hole structure, and no large pore structure. The investigation suggests that the hydrolysis rate of the silica source and the interaction strength between the PS sphere template and SiO₂ may determine the large pore structure of the final product. The moderate hydrolysis rate of tetraethyl orthosilicate (TEOS) and strong interaction between the PS sphere template and SiO₂ is conductive to the formation of large through-holes in SiO₂ spheres. To further investigate the pore structure of through-holes of SiO₂ spheres, the lysozyme (Lz) was selected as a model molecule for adsorption experiments. The Lz adsorption experiments show that SiO₂ spheres with through-hole structure exhibit a much faster adsorption rate than SiO₂ spheres with hollow structure and higher adsorption capacity than SiO₂ with no large pore structure. Such a behavior could find interesting applications in the fields that require a fast-loading characteristic.

DMF stabilized Li3N slurry for manufacturing self-prelithiatable lithium-ion capacitors

Li₃N is an excellent zero-residue positive electrode pre-lithiation additive to offset the initial lithium loss in lithium-ion capacitors. However, Li₃N has an intrinsic problem of poor compatibility with commonly used aprotic polar solvents in electrode manufacture procedure due to its high reactivity with commonly used solvents like N-methy-2-pyrrolidone (NMP) and etc. It is the Valley of Death between research and large-scale commercialization of Li-ion capacitors using Li₃N as prelithiation agent. In this work, Li₃N containing electrode is prepared by a commercially adoptable route for the first time, using N,N-dimethylformamide (DMF) to homogenate the electrode slurry. The DMF molecular stabilizing mechanism is confirmed via experiment analysis and DFT simulation, indicating that the dehydrogenation energy for DMF is obviously larger than other commonly used solvents such as NMP and etc. The soft package lithium-ion capacitors (LIC250) with only 12 wt% Li₃N addition in AC positive electrode exhibits excellent rate capability, cyclic stability and ultrahigh specific energy. Its specific energy is 2.3 times higher than the Li₃N-free devices, with energy retention as high as 90% after 10,000 cycles.

Association between Skeletal Muscle Strength and Dysphagia among Chinese Community-Dwelling Elderly Adults

OBJECTIVES

Swallowing disorder is a health burden for the elderly in China. This study aimed to investigate the prevalence of dysphagia and to test the association between skeletal muscle strength and swallowing problems among community-dwelling older adults.

DESIGN

A cross-sectional study.

SETTING

Community-dwelling Chinese elderly in China.

PARTICIPANTS

3361 adults aged 65 years or above were involved, among which 1740 (51.8%) were female, with average age of 72.64 (Standard deviation, SD=6.10) years old.

MEASUREMENTS

Handgrip strength (HGS) was used to evaluate skeletal muscle strength. Dysphagia assessment was performed using the Eating Assessment Tool-10 (EAT-10) and the 30mL water swallow test (WST). Binary logistic regression was used to evaluate the relationship between skeletal muscle strength and dysphagia, and covariates as age, gender, material status, etc. were adjusted.

RESULTS

The prevalence of dysphagia were 5.5% and 12.9%, screened by EAT-10 and 30mL WST respectively. Participants with dysphagia showed lower HGS (21.73 ± 9.20 vs. 25.66 ± 11.32, p<0.001, by EAT-10; 20.26 ± 9.88 vs. 26.22 ± 11.28, p<0.001, by WST). The adjusted model suggested that muscle strength is a protective factor for swallowing disorders (adjusted OR=0.974, 95%CI: 0.950-0.999, by EAT-10; adjusted OR=0.952, 95%CI: 0.933-0.972, by WST). Subgroup analyses of WST found the effects were significant among participants aged in 70-74 years group and ≥75 years group, rather than those aged under 70.

CONCLUSION

Dysphagia was significantly associated with skeletal muscle strength among the community-dwelling elderly population. Effective interventions should be taken to manage the decline of muscle strength for the older adults, especially early prevention before 70 years old.