Improved 2α-Hydroxylation Efficiency of Steroids by CYP154C2 Using Structure-Guided Rational Design

Cytochrome P450 enzymes are promising biocatalysts for industrial use because they catalyze site-selective C-H oxidation and have diverse catalytic reactions and a broad substrate range. In this study, the 2α-hydroxylation activity of CYP154C2 from Streptomyces avermitilis MA-4680T toward androstenedione (ASD) was identified by an in vitro conversion assay. The testosterone (TES)-bound structure of CYP154C2 was solved at 1.42 Å, and this structure was used to design eight mutants, including single, double, and triple mutants, to improve the conversion efficiency. Mutants L88F/M191F and M191F/V285L were found to enhance the conversion rates significantly (i.e., 8.9-fold and 7.4-fold for TES, 46.5-fold and 19.5-fold for ASD, respectively) compared with the wild-type (WT) enzyme while retaining high 2α-position selectivity. The substrate binding affinity of the L88F/M191F mutant toward TES and ASD was enhanced compared with that of WT CYP154C2, supporting the measured increase in the conversion efficiencies. Moreover, the total turnover number and kcat/Km of the L88F/M191F and M191F/V285L mutants increased significantly. Interestingly, all mutants containing L88F generated 16α-hydroxylation products, suggesting that L88 in CYP154C2 plays a vital role in substrate selectivity and that the amino acid corresponding to L88 in the 154C subfamily affects the orientation of steroid binding and substrate selectivity. IMPORTANCE Hydroxylated derivatives of steroids play essential roles in medicine. Cytochrome P450 enzymes selectively hydroxylate methyne groups on steroids, which can dramatically change their polarity, biological activity and toxicity. There is a paucity of reports on the 2α-hydroxylation of steroids, and documented 2α-hydroxylate P450s show extremely low conversion efficiency and/or low regio- and stereoselectivity. This study conducted crystal structure analysis and structure-guided rational engineering of CYP154C2 and efficiently enhanced the conversion efficiency of TES and ASD with high regio- and stereoselectivity. Our results provide an effective strategy and theoretical basis for the 2α-hydroxylation of steroids, and the structure-guided rational design of P450s should facilitate P450 applications in the biosynthesis of steroid drugs.

A novel steroid hydroxylase from Nigrospora sphaerica with various hydroxylation capabilities to different steroid substrates

Fungal hydroxylation of steroids is a key step in the industrial production of various steroid drugs. The main enzymes that enable these reactions are Cytochrome P450s (CYP), though very few industrially important CYPs have been identified and characterized. In this study, we identified a CYP enzyme (CYP-N2) and a cytochrome P450 reductase (CPRns) from Nigrospora sphaerica 722 by a combination of transcriptome sequencing and heterologous expression in Pichia pastoris. Gene CYP-N2 co-expressed with CPRns in Pichia pastoris GS115 showed 6β- and 15α-hydroxylation activities on progesterone. Different hydroxylation specificity of CYP-N2 was observed on different steroid substrates. CYP-N2 showed 1α-hydroxylation on cortisone and 1α-hydroxylation and 6β-hydroxylation activities on androstenedione (AD). With dehydroepiandrosterone (DHEA) as a substrate, the hydroxylated products of CYP-N2 included 7α-hydroxy-DHEA and 7α,15α-dihydroxy-DHEA. In order to precisely elucidate CYP-N2 biological function and find out the key amino acids influencing its hydroxylation capabilities in the binding pocket, new generation artificial intelligence technology AlphaFold 2 was used to predict the function-structure of CYP-N2 with high reliability. Through molecular docking, it was concluded that the residues almost binding all substrates were located in the same substrate binding pocket and the various hydroxylation abilities might be due to the different binding conformations of different substrates in the binding pocket. Alanine scanning mutagenesis was used to verify key amino acids identified by the molecular docking with steroid substrates. The 128 THR mutation resulted in conversion rate increase for substrates AD and cortisone by 2.6-fold and 2.1-fold respectively. The information obtained in this study is beneficial to facilitating the engineering of more efficient steroid hydroxylases for industrial applications.

Recent trends in biocatalysis

Biocatalysis has undergone revolutionary progress in the past century. Benefited by the integration of multidisciplinary technologies, natural enzymatic reactions are constantly being explored. Protein engineering gives birth to robust biocatalysts that are widely used in industrial production. These research achievements have gradually constructed a network containing natural enzymatic synthesis pathways and artificially designed enzymatic cascades. Nowadays, the development of artificial intelligence, automation, and ultra-high-throughput technology provides infinite possibilities for the discovery of novel enzymes, enzymatic mechanisms and enzymatic cascades, and gradually complements the lack of remaining key steps in the pathway design of enzymatic total synthesis. Therefore, the research of biocatalysis is gradually moving towards the era of novel technology integration, intelligent manufacturing and enzymatic total synthesis.

Enzymatic Characterization and Comparison of Two Steroid Hydroxylases CYP154C3-1 and CYP154C3-2 from Streptomyces Species

Bacterial cytochrome P450 (CYP) enzymes are responsible for the hydroxylation of diverse endogenous substances with a heme molecule used as a cofactor. This study characterized two CYP154C3 proteins from Streptomyces sp. W2061 (CYP154C3-1) and Streptomyces sp. KCCM40643 (CYP154C3-2). The enzymatic activity assays of both CYPs conducted using heterologous redox partners' putidaredoxin and putidaredoxin reductase showed substrate flexibility with different steroids and exhibited interesting product formation patterns. The enzymatic characterization revealed good activity over a pH range of 7.0 to 7.8 and the optimal temperature range for activity was 30 to 37°C. The major product was the C16-hydroxylated product and the kinetic profiles and patterns of the generated hydroxylated products differed between the two enzymes. Both enzymes showed a higher affinity toward progesterone, with CYP154C3-1 demonstrating slightly higher activity than CYP154C3-2 for most of the substrates. Oxidizing agents (diacetoxyiodo) benzene (PIDA) and hydrogen peroxide (H₂O₂) were also utilized to actively support the redox reactions, with optimum conversion achieved at concentrations of 3 mM and 65 mM, respectively. The oxidizing agents affected the product distribution, influencing the type and selectivity of the CYP-catalyzed reaction. Additionally, CYP154C3s also catalyzed the C-C bond cleavage of steroids. Therefore, CYP154C3s may be a good candidate for the production of modified steroids for various biological uses.

Scalable biocatalytic C-H oxyfunctionalization reactions

Catalytic C-H oxyfunctionalization reactions have garnered significant attention in recent years with their ability to streamline synthetic routes toward complex molecules. Consequently, there have been significant strides in the design and development of catalysts that enable diversification through C-H functionalization reactions. Enzymatic C-H oxygenation reactions are often complementary to small molecule based synthetic approaches, providing a powerful tool when deployable on preparative-scale. This review highlights key advances in scalable biocatalytic C-H oxyfunctionalization reactions developed within the past decade.

Regio- and stereoselective hydroxylation of testosterone by a novel cytochrome P450 154C2 from Streptomyces avermitilis

Cytochrome P450 enzymes (P450 or CYP) are some of the most versatile biocatalysts, and offer advantages for oxidizing unreactive C-H bonds in mild conditions. In this study, we identified a novel cytochrome P450 154C2 from Streptomyces avermitilis and characterized its function in 2α-hydroxylation of testosterone with regio- and stereoselectivity. To investigate the efficiency of electron transfer, we conducted biotransformation using two different P450 redox partners-RhFRED (RhF reductase domain) from Rhodococcus sp. and Pdx (putidaredoxin)/Pdr (putidaredoxin reductase) from Pseudomonas putida and revealed that RhFRED was more effective than Pdx/Pdr, especially in vivo. The K_m and k_cat values for testosterone were estimated to be 0.16 ± 0.05 mM and 0.13 ± 0.02 min^-1, and k_cat/K_m was 0.81 min^-1 mM^-1. We also determined the crystal structure of the substrate-free form of CYP154C2 at 1.5 Å resolution. The structure has a closed conformation, and the substrate binding pocket is narrow, which can explain the strict substrate specificity of the enzyme.

Bacterial cytochrome P450-catalyzed regio- and stereoselective steroid hydroxylation enabled by directed evolution and rational design

Steroids are the most widely marketed products by the pharmaceutical industry after antibiotics. Steroid hydroxylation is one of the most important functionalizations because their derivatives enable a higher biological activity compared to their less polar non-hydroxylated analogs. Bacterial cytochrome P450s constitute promising biocatalysts for steroid hydroxylation due to their high expression level in common workhorses like Escherichia coli. However, they often suffer from wrong or insufficient regio- and/or stereoselectivity, low activity, narrow substrate range as well as insufficient thermostability, which hampers their industrial application. Fortunately, these problems can be generally solved by protein engineering based on directed evolution and rational design. In this work, an overview of recent developments on the engineering of bacterial cytochrome P450s for steroid hydroxylation is presented.

Hydroxylation of Steroids by a Microbial Substrate-Promiscuous P450 Cytochrome (CYP105D7): Key Arginine Residues for Rational Design

Our previous study showed that CYP105D7, a substrate-promiscuous P450, catalyzes the hydroxylation of 1-deoxypentalenic acid, diclofenac, naringenin, and compactin. In this study, 14 steroid compounds were screened using recombinant Escherichia coli cells harboring genes encoding CYP105D7 and redox partners (Pdx/Pdr, RhFRED, and FdxH/FprD), and the screening identified steroid A-ring 2β- and D-ring 16β-hydroxylation activity. Wild-type CYP105D7 was able to catalyze the hydroxylation of five steroids (testosterone, progesterone, 4-androstene-3,17-dione, adrenosterone, and cortisone) with low (<10%) conversion rates. Structure-guided site-directed mutagenesis of arginine residues around the substrate entrance and active site showed that the R70A and R190A single mutants and an R70A/R190A double mutant exhibited greatly enhanced conversion rates for steroid hydroxylation. For the conversion of testosterone in particular, the R70A/R190A mutant's k _cat/K_m values increased 1.35-fold and the in vivo conversion rates increased significantly by almost 9-fold with high regio- and stereoselectivity. Molecular docking analysis revealed that when Arg70 and Arg190 were replaced with alanine, the volume of the substrate access and binding pocket increased 1.08-fold, which might facilitate improvement of the hydroxylation efficiency of steroids.IMPORTANCE Cytochrome P450 monooxygenases (P450s) are able to introduce oxygen atoms into nonreactive hydrocarbon compounds under mild conditions, thereby offering significant advantages compared to chemical catalysts. Promiscuous P450s with broad substrate specificity and reaction diversity have significant potential for applications in various fields, including synthetic biology. The study of the function, molecular mechanisms, and rational engineering of substrate-promiscuous P450s from microbial sources is important to fulfill this potential. Here, we present a microbial substrate-promiscuous P450, CYP105D7, which can catalyze hydroxylation of steroids. The loss of the bulky side chains of Arg70 and Arg190 in the active site and substrate entrance resulted in an up to 9-fold increase in the substrate conversion rate. These findings will support future rational and semirational engineering of P450s for applications as biocatalysts.

Effects of Alternative Redox Partners and Oxidizing Agents on CYP154C8 Catalytic Activity and Product Distribution

CYP154C8 catalyzes the hydroxylation of diverse steroids, as has previously been demonstrated, by using an NADH-dependent system including putidaredoxin and putidaredoxin reductase as redox partner proteins carrying electrons from NADH. In other reactions, CYP154C8 reconstituted with spinach ferredoxin and NADPH-dependent ferredoxin reductase displayed catalytic activity different from that of the NADH-dependent system. The NADPH-dependent system showed multistep oxidation of progesterone and other substrates including androstenedione, testosterone, and nandrolone. (Diacetoxyiodo)benzene was employed to generate compound I (FeO³⁺ ), actively supporting the redox reactions catalyzed by CYP154C8. In addition to 16α-hydroxylation, progesterone and 11-oxoprogesterone also underwent hydroxylation at the 6β-position in reactions supported by (diacetoxyiodo)benzene. CYP154C8 was active in the presence of high concentrations (>10 mm) of H₂ O₂ , with optimum conversion surprisingly being achieved at ≈75 mm H₂ O₂ . More importantly, H₂ O₂ tolerance by CYP154C8 was evident in the very low heme oxidation rate constant (K) even at high concentrations of H₂ O₂ . Our results demonstrate that alternative redox partners and oxidizing agents influence the catalytic efficiency and product distribution of a cytochrome P450 enzyme. More importantly, these choices affected the type and selectivity of reaction catalyzed by the P450 enzyme.

[Methods for determining of cytochrome P450 isozymes functional activity]

The review is dedicated to modern methods and technologies for determining of cytochrome P450 isozymes functional activity, such as absorbance and fluorescent spectroscopy, electron paramagnetic resonance (EPR), nuclear magnetic resonance (NMR), Raman, Mossbauer, and X-ray spectroscopy, surface plasmon resonance (SPR), atomic force microscopy (AFM). Methods of molecular genetic analysis were reviewed from personalized medicine point of view. The use of chromate-mass-spectrometric methods for cytochrome P450-dependent catalytic reactions' products was discussed. The review covers modern electrochemical systems based on cytochrome P450 isozymes for their catalytic activity analysis, their use in practice and further development perspectives for experimental pharmacology, biotechnology and translational medicine.

Structure-Based Engineering of Steroidogenic CYP260A1 for Stereo- and Regioselective Hydroxylation of Progesterone

The production of regio- and stereoselectively hydroxylated steroids is of high pharmaceutical interest and can be achieved by cytochrome P450-based biocatalysts. CYP260A1 from Sorangium cellulosum strain So ce56 catalyzes hydroxylation of C19 or C21 steroids at the very unique 1α-position. However, the conversion of progesterone (PROG) by CYP260A1 is very unselective. In order to improve its selectivity we applied a semirational protein engineering approach, resulting in two different, highly regio- and stereoselective mutants by replacing a single serine residue (S276) of the substrate recognition site 5 with an asparagine or isoleucine. The S276N mutant converted PROG predominantly into 1α-hydroxy-PROG, while the S276I mutant led to 17α-hydroxy-PROG. We solved the high-resolution crystal structures of the PROG-bound S276N and S276I mutants, which revealed two different binding modes of PROG in the active site. The orientations were consistent with the exclusive 1α- (pro-1α binding mode) and 17α-hydroxylation (pro-17α-binding mode) of S276N and S276I, respectively. We observed that water-mediated hydrogen bonds contribute to the stabilization of the polar C3 and C17 substituents of PROG. Both binding modes of PROG may be stabilized in the wild-type enzyme. The change in regioselectivity is mainly driven by destabilizing the alternative binding mode due to steric hindrance and hydrogen bond disruption, caused by the mutations of Ser276. Thus, for the first time, the change in the selectivity of cytochrome P450-mediated steroid hydroxylation created by rational mutagenesis can be explained by the obtained 3D structures of the substrate-bound mutants, providing the basis for further experiments to engineer the biocatalyst toward novel steroid hydroxylation positions.

CYP260B1 acts as 9α-hydroxylase for 11-deoxycorticosterone

Steroids and their oxyfunctionalized counterparts are valuable compounds for the pharmaceutical industry; however, the regio- and stereoselective introduction of oxygen is a challenging task for the synthetic chemistry. Thus, cytochromes P450 play an important role for the functionalization of steroidal compounds. In this study, we elucidated the main product of 11-deoxycorticosterone conversion formed by CYP260B1 from Sorangium cellulosum So ce56 as 9α-OH 11-deoxycorticosterone by NMR spectroscopy. This is, to the best of our knowledge, the first identification of a 9α-hydroxylase for this substrate. In addition, the major side product was identified as 21-OH pregna-1,4-diene-3,20-dione. Studies using 1α-OH 11-deoxycorticosterone as substrate suggested that the major side product is formed via dehydrogenation reaction. This side reaction was considerably decreased by employing the CYP260B1-T224A mutant, which showed an increased selectivity of about 75% compared to the 60% of the wild type for the 9α-hydroxylation. To scale up the production, an E. coli based whole-cell system harboring the CYP260B1-T224A variant as well as two heterologous redox partners was used. Employing growing cells in minimal medium led to a productivity of about 0.25g/l/d at a 50ml scale showing the biotechnological potential of this system.

CYP109E1 is a novel versatile statin and terpene oxidase from Bacillus megaterium

CYP109E1 is a cytochrome P450 monooxygenase from Bacillus megaterium with a hydroxylation activity for testosterone and vitamin D3. This study reports the screening of a focused library of statins, terpene-derived and steroidal compounds to explore the substrate spectrum of this enzyme. Catalytic activity of CYP109E1 towards the statin drug-precursor compactin and the prodrugs lovastatin and simvastatin as well as biotechnologically relevant terpene compounds including ionones, nootkatone, isolongifolen-9-one, damascones, and β-damascenone was found in vitro. The novel substrates induced a type I spin-shift upon binding to P450 and thus permitted to determine dissociation constants. For the identification of conversion products by NMR spectroscopy, a B. megaterium whole-cell system was applied. NMR analysis revealed for the first time the ability of CYP109E1 to catalyze an industrially highly important reaction, the production of pravastatin from compactin, as well as regioselective oxidations generating drug metabolites (6'β-hydroxy-lovastatin, 3'α-hydroxy-simvastatin, and 4″-hydroxy-simvastatin) and valuable terpene derivatives (3-hydroxy-α-ionone, 4-hydroxy-β-ionone, 11,12-epoxy-nootkatone, 4(R)-hydroxy-isolongifolen-9-one, 3-hydroxy-α-damascone, 4-hydroxy-β-damascone, and 3,4-epoxy-β-damascone). Besides that, a novel compound, 2-hydroxy-β-damascenone, produced by CYP109E1 was identified. Docking calculations using the crystal structure of CYP109E1 rationalized the experimentally observed regioselective hydroxylation and identified important amino acid residues for statin and terpene binding.

Steroids hydroxylation catalyzed by the monooxygenase mutant 139-3 from Bacillus megaterium BM3

The search of new substrates with pharmaceutical and industrial potential for biocatalysts including cytochrome P450 enzymes is always challenging. Cytochrome P450 BM3 mutant 139-3, a versatile biocatalyst, exhibited hydroxylation activities towards fatty acids and alkanes. However, there were limited reports about its hydroxylation activity towards steroids. Herein, an Escherichia coli–based whole-cell extract containing the recombinant 139-3 protein was used as the biocatalyst to screen 13 steroids. Results revealed that 139-3 was able to specifically hydroxylate androstenedione (1) at 1α-position, generating a hydroxylated steroid 1α-OH-androstenedione (1a). To investigate whether C-1α hydroxylation catalyzed by BM3 mutant 139-3 could be industrially used, an optimization of catalyzing conditions was performed. Accordingly, the BM3 mutant 139-3 enzyme was observed to display maximum activity at 37 °C, under pH 7.0 for 4 h, with 37% transformation rate. Moreover, four 139-3 variants were generated by random mutagenesis with the aim of improving its activity and expanding substrate scope. Surprisingly, these mutants, sharing a common mutated site R379S, lost their activities towards androstenedione (1). These data clearly indicated that arginine residue located at site 379 played key role in the hydroxylation activities of 139-3. Overall, these new findings broadened the substrate scope of 139-3 enzyme, thereby expanding its potential applications as a biocatalyst on steroids hydroxylation in pharmaceutical industry.

Improvement of a P450-Based Recombinant Escherichia coli Whole-Cell System for the Production of Oxygenated Sesquiterpene Derivatives

Sesquiterpenes are common constituents of essential oil in plants. Their oxygenated derivatives often possess desirable flavor, fragrance, and pharmaceutical properties. Recently, the CYP264B1-based recombinant Escherichia coli whole-cell system has been constructed for the oxidation of sesquiterpenes. However, limiting factors of this system related to the high volatility of substrates and the suitability of the P450 redox partner need to be addressed. In this work, the improvement of the system was implemented with (+)-α-longipinene as a model substrate. By using 2-hydroxypropyl-β-cyclodextrin and an alternative ferredoxin reductase, the conversion of (+)-α-longipinene was improved 77.1%. Applying the optimized conditions, the yields of the main products were 54.2, 34.2, and 47.2 mg L^-1, corresponding to efficiencies of 82.1, 51.8, and 71.5% for the conversion of (+)-α-longipinene, (-)-isolongifolene, and α-humulene, respectively, at a 200 mL scale. These products were characterized as 12-hydroxy-α-longipinene, isolongifolene-9-one, and 5-hydroxy-α-humulene, respectively, by nuclear magnetic resonance spectroscopy.

Investigating the effect of available redox protein ratios for the conversion of a steroid by a myxobacterial CYP260A1

Since cytochromes P450 are external monooxygenases, available surrogate redox partners have been used to reconstitute the P450 activity. However, the effect of various ratios of P450s and the redox proteins have not been extensively studied so far, although different combinations of the redox partners have shown variations in substrate conversion. To address this issue, CYP260A1 was reconstituted with various ratios of adrenodoxin and adrenodoxin reductase to convert 11-deoxycorticosterone, and the products were characterized by NMR. We show the effect of the available redox protein ratios not only on the P450 catalytic activity but also on the product pattern.

Structural basis of steroid binding and oxidation by the cytochrome P450 CYP109E1 from Bacillus megaterium

Cytochrome P450 monooxygenases (P450s) are attractive enzymes for the pharmaceutical industry, in particular, for applications in steroidal drug synthesis. Here, we report a comprehensive functional and structural characterization of CYP109E1, a novel steroid‐converting cytochrome P450 enzyme identified from the genome of Bacillus megaterium DSM319. In vitro and whole‐cell in vivo turnover experiments, combined with binding assays, revealed that CYP109E1 is able to hydroxylate testosterone at position 16β. Related steroids with bulky substituents at carbon C17, like corticosterone, bind to the enzyme without being converted. High‐resolution X‐ray structures were solved of a steroid‐free form of CYP109E1 and of complexes with testosterone and corticosterone. The structural analysis revealed a highly dynamic active site at the distal side of the heme, which is wide open in the absence of steroids, can bind four ordered corticosterone molecules simultaneously, and undergoes substantial narrowing upon binding of single steroid molecules. In the crystal structures, the single bound steroids adopt unproductive binding modes coordinating the heme‐iron with their C3‐keto oxygen. Molecular dynamics (MD) simulations suggest that the steroids may also bind in ~180° reversed orientations with the C16 carbon and C17‐substituents pointing toward the heme, leading to productive binding of testosterone explaining the observed regio‐ and stereoselectivity. The X‐ray structures and MD simulations further identify several residues with important roles in steroid binding and conversion, which could be confirmed by site‐directed mutagenesis. Taken together, our results provide unique insights into the CYP109E1 activity, substrate specificity, and regio/stereoselectivity.

Database

The atomic coordinates and structure factors have been deposited in the Protein Data Bank with accession codes 5L90 (steroid‐free CYP109E1), 5L91 (CYP109E1‐COR4), 5L94 (CYP109E1‐TES), and 5L92 (CYP109E1‐COR).

Enzymes

Cytochrome P450 monooxygenase CYP109E1, EC 1.14.14.1, UniProt ID: D5DKI8, Adrenodoxin reductase EC 1.18.1.6.

Scrutiny of electrochemically-driven electrocatalysis of C-19 steroid 1α-hydroxylase (CYP260A1) from Sorangium cellulosum So ce56

Direct electrochemistry and bioelectrocatalysis of a newly discovered C-19 steroid 1α-hydroxylase (CYP260A1) from the myxobacterium Sorangium cellulosum So ce56 were investigated. CYP260A1 was immobilized on screen-printed graphite electrodes (SPE) modified with gold nanoparticles, stabilized by didodecyldimethylammonium bromide (SPE/DDAB/Au). Cyclic voltammograms in argon-saturated substrate free 0.1 M potassium phosphate buffer, pH 7.4, and in enzyme-substrate complex with androstenedione demonstrated a redox processes with a single redox couple of E(0') of -299 ± 16 mV and -297.5 ± 21 mV (vs. Ag/AgCl), respectively. CYP260A1 exhibited an electrocatalytic activity detected by an increase of the reduction current in the presence of dissolved oxygen and upon addition of the substrate (androstenedione) in the air-saturated buffer. The catalytic current of the enzyme correlated with substrate concentration in the electrochemical system and this dependence can be described by electrochemical Michaelis-Menten model. The products of CYP260A1-depended electrolysis at controlled working electrode potential of androstenedione were analyzed by mass-spectrometry. MS analysis revealed a mono-hydroxylated product of CYP260A1-dependent electrocatalytic reaction towards androstenedione.