TiO 2 ‐Based Photocatalysis at the Interface with Biology and Biomedicine

Recent advances in biosensors based on metal-oxide semiconductors system-integrated into bioelectronics

Metal-oxide semiconductors (MOSs) have emerged as pivotal components in technology related to biosensors and bioelectronics. Detecting biomarkers in sweat provides a glimpse into an individual's metabolism without the need for sample preparation or collection steps. The distinctive attributes of this biosensing technology position it as an appealing option for biomedical applications beyond the scope of diagnosis and healthcare monitoring. This review encapsulates ongoing developments of cutting-edge biosensors based on MOSs. Recent advances in MOS-based biosensors for human sweat analyses are reviewed. Also discussed is the progress in sweat-based biosensing technologies to detect and monitor diseases. Next, system integration of biosensors is demonstrated ultimately to ensure the accurate and reliable detection and analysis of target biomarkers beyond individual devices. Finally, the challenges and opportunities related to advanced biosensors and bioelectronics for biomedical applications are discussed.

Enhancing Photocatalytic Properties of TiO2 Photocatalyst and Heterojunctions: A Comprehensive Review of the Impact of Biphasic Systems in Aerogels and Xerogels Synthesis, Methods, and Mechanisms for Environmental Applications

This review provides a detailed exploration of titanium dioxide (TiO2) photocatalysts, emphasizing structural phases, heterophase junctions, and their impact on efficiency. Key points include diverse synthesis methods, with a focus on the sol-gel route and variants like low-temperature hydrothermal synthesis (LTHT). The review delves into the influence of acid-base donors on gelation, dissects crucial drying techniques for TiO2 aerogel or xerogel catalysts, and meticulously examines mechanisms underlying photocatalytic activity. It highlights the role of physicochemical properties in charge diffusion, carrier recombination, and the impact of scavengers in photo-oxidation/reduction. Additionally, TiO2 doping techniques and heterostructures and their potential for enhancing efficiency are briefly discussed, all within the context of environmental applications.

Palladium nanoparticles on gallium nitride as a Mott-Schottky catalyst for efficient and durable photoactivation of unactivated alkanes

The direct functionalization of inert C-H bonds has long been a "holy grail" for the chemistry world. In this report, the direct C(sp3)-N bond formation of unactivated alkanes is reported with a GaN based Mott-Schottky catalyst under photocatalytic reaction conditions. Long term stability and reaction efficiency (up to 92%) were achieved with this photocatalyst. The deposition of a Pd co-catalyst on the surface of GaN significantly enhanced the reaction efficiency. Microscopic investigation suggested a remarkable interaction in the Pd/GaN Schottky junction, giving a significant Pd/GaN depletion layer. In addition, density functional theory (DFT) calculations were performed to show the distinct performance of Pd nanoparticles at the atomic level.

Nanophotocatalysts in biomedicine: Cancer therapeutic, tissue engineering, biosensing, and drug delivery applications

Photocatalysis can be considered as a green technology owing to its excellent potential for sustainability and fulfilling several principles of green chemistry. This process uses light radiation as the primary energy source, preventing or reducing the requirement for artificial light sources and exogenous catalytic entities. Photocatalysis has promising applications in biomedicine such as drug delivery, biosensing, tissue engineering, cancer therapeutics, etc. In targeted cancer therapeutics, photocatalysis can be employed in photodynamic therapy to form reactive oxygen species that damage cancerous cells' structure. Nanophotocatalysts can be used in targeted drug delivery, showing potential applications in nuclear-targeted drug delivery along with specific delivery of chemotherapeutics to cancer cells or tumor sites. On the other hand, in tissue engineering, nanophotocatalysts can be employed in designing scaffolds that promote cell growth and tissue regeneration. However, some important challenges pertaining to the performance of photocatalysis, large-scale production of nanophotocatalysts, optimization of reaction/synthesis conditions, long-term biosafety issues, stability, clinical translation, etc. still need further explorations. Herein, the most recent advancements pertaining to the biomedical applications of nanophotocatalysts are reflected, focusing on drug delivery, tissue engineering, biosensing, and cancer therapeutic potentials.

The Impact of Side-Selective Laser Tailoring of Titania Nanotubes on Changes in Photoelectrocatalytic Activity

Over the last few decades, titanium(IV) oxide-based materials have gained particular attention due to their stability, corrosion resistance, photocatalytic activity under UV light, and possibilities for modification. Among various structures, TiO₂ nanotubes (NTs) grown on Ti foil or glass substrates and obtained through a simple anodization process are widely used as photocatalysts or photoanodes. During the anodization process, the geometry of the nanotubes (length, distribution, diameter, wall thickness, etc.) is easily controlled, though the obtained samples are amorphous. Heat treatment is required to transform the amorphous material into crystalline material. However, instead of time- and cost-consuming furnace treatment, fast and precise laser annealing is applied as a promising alternative. Nonetheless, laser treatment can result in geometry changes of TiO₂ NTs, consequently altering, their electrochemical activity. Moreover, modification of the TiO₂ NTs surfaces with transition metals and further laser treatment can result in materials with unique photoelectrochemical properties. In this regard, we gathered the latest achievements in the field of laser-treated titania for this review paper. We mainly focused on single structural and morphological changes resulting from pulsed laser annealing and their influence on the electrochemical properties of titania. Finally, the theoretical basis for and combination of laser- and metal-modifications and their impact on the resulting possibilities for electrochemical water splitting are also discussed.

Near-Infrared-Enhanced Dual Enzyme-Mimicking Ag-TiO2-x@Alginate Microspheres with Antibactericidal and Oxygeneration Abilities to Treat Periodontitis

The effective treatment for periodontitis is to completely and sustainedly eradicate the bacterial pathogens from the complex periodontal pockets. Local sustained-release antibiotics as a complementary treatment after scaling and root planning can sustainedly combat bacterial pathogens in the periodontal pockets to help treat the disease, but the increasing concern of bacterial resistance limits its future use. Here, we reported a local antibacterial system based on microsized multifunctional Ag-TiO_2-x encapsulated in alginate (ATA) microspheres. We confirmed that ATA displayed strong photothermally enhanced dual enzyme-mimicking (peroxidase-like and catalase-like) activities and weak photocatalytic activity under 808 nm near-infrared (NIR) irradiation, which could boost the generation of reactive oxygen species (ROS) and O₂ in the presence of low-level H₂O₂. As a result, the ATA/H₂O₂/NIR system exhibited efficient antibacterial activity against Porphyromonas gingivalis and Streptococcus gordonii in both planktonic and biofilm forms. With the help of ROS, ATA could release Ag⁺ in concentrations sufficient to inhibit periodontal pathogens as well. Moreover, the in situ-generated oxygen was supposed to alleviate the local hypoxic environment and would help downregulate the lipopolysaccharide-mediated inflammatory response of periodontal stem cells. The in vivo rat periodontitis treatment results demonstrated that the ATA/H₂O₂/NIR system reduced the bacterial load, relieved inflammation, and improved tissue healing. Our work developed a new local prolonged bactericidal and oxygenation system for enhanced periodontitis. Avoiding the usage of antibiotics and nanomaterials, this strategy showed great promise in adjunctive periodontitis treatment and also in other biomedical applications.

TiO2-embedded mesoporous silica with lower porosity is beneficial to adsorb the pollutants and retard UV filter absorption: A possible application for outdoor skin protection

The purpose of the current investigation was to develop multifunctional TiO₂-embedded mesoporous silica incorporating avobenzone to protect against environmental stress through pollutant adsorption and UVA protection. We sought to explore the effect of the mesoporous porosity on the capability of contaminant capture and the suppression of avobenzone skin penetration. The porosity of the mesoporous silica was tuned by adjusting the ratio of template triblock copolymers (Pluronic P123 and F68). The Pluronic P123:F68 ratios of 3:1, 2:2, and 1:3 produced mesoporous silica with pore volumes of 0.66 (TiO₂/SBA-L), 0.47 (TiO₂/SBA-M), and 0.25 (TiO₂/SBA-S) cm³/g, respectively. X-ray scattering and electron microscopy confirmed the SBA-15 structure of the as-prepared material had a size of 3-5 μm. The maximum adsorbability of fluoranthene and methylene blue was found to be 43% and 53% for the TiO₂/SBA-S under UVA light, respectively. The avobenzone loaded into the mesoporous silica demonstrated the synergistic effect of in vitro UVA protection, reaching an UVA/UVB absorbance ratio of near 1.5 (Boots star rating = 5). The encapsulation of avobenzone into the TiO₂/SBA-S lessened cutaneous avobenzone absorption from 0.76 to 0.50 nmol/mg, whereas no reduction was detected for the TiO₂/SBA-L. The avobenzone-loaded TiO₂/SBA-S hydrogel exhibited a greater improvement in skin barrier recovery and proinflammatory mediator mitigation compared to the SBA-S hydrogel (without TiO₂). The cytokines/chemokines in the photoaged skin were reduced by two- to three-fold after TiO₂/SBA-S treatment compared to the non-treatment control. Our data suggested that the mesoporous formulation with low porosity and a specific surface area showed effective adsorbability and UVA protection, with reduced UVA filter absorption. The versatility of the developed mesoporous system indicated a promising potential for outdoor skin protection.

Synthesis, modification and application of titanium dioxide nanoparticles: a review

Titanium dioxide (TiO₂) has been heavily investigated owing to its low cost, benign nature and strong photocatalytic ability. Thus, TiO₂ has broad applications including photocatalysts, Li-ion batteries, solar cells, medical research and so on. However, the performance of TiO₂ is not satisfactory due to many factors such as the broad band gap (3.01 to 3.2 eV) and fast recombination of electron-hole pairs (10^-12 to 10^-11 s). Plenty of work has been undertaken to improve the properties, such as structural and dopant modifications, which broaden the applications of TiO₂. This review mainly discusses the aspects of TiO₂-modified nanoparticles including synthetic methods, modifications and applications.

Photothermal-Enhanced Fenton-like Catalytic Activity of Oxygen-Deficient Nanotitania for Efficient and Safe Tooth Whitening

The growing demand for charming smiles has led to the popularization of tooth bleaching procedures. Current tooth bleaching products with high-concentration hydrogen peroxide (HP, 30-40%) are effective but detrimental due to the increased risk of enamel destruction, tooth sensitivity, and gingival irritation. Herein, we reported a less-destructive and efficient tooth whitening strategy with a low-concentration HP, which was realized by the remarkably enhanced Fenton-like catalytic activity of oxygen-deficient TiO₂ (TiO_2-x). TiO_2-x nanoparticles were synthesized with a modified solid-state chemical reduction approach with NaBH₄. The Fenton-like activity of TiO_2-x was optimized by manipulating oxygen vacancy (OV) concentration and further promoted by the near-infrared (NIR)-induced photothermal effect of TiO_2-x. The TiO_2-x sample named BT45 was chosen due to the highest methylene blue (MB) adsorption ability and Fenton-like activity among acquired samples. The photothermal property of BT45 under 808 nm NIR irradiation was verified and its enhancement on Fenton-like activity was also studied. The BT45/HP + NIR group performed significantly better in tooth whitening than the HP + NIR group on various discolored teeth (stained by Orange II, tea, or rhodamine B). Excitingly, the same tooth whitening performance as the Opalescence Boost, a tooth bleaching product containing 40% HP, was obtained by a self-produced bleaching gel based on this novel system containing 12% HP. Besides, negligible enamel destruction, safe temperature range, and good cytocompatibility of TiO_2-x nanoparticles also demonstrated the safety of this tooth bleaching strategy. This work indicated that the photothermal-enhanced Fenton-like performance of the TiO_2-x-based system is highly promising in tooth bleaching application and can also be extended to other biomedical applications.

Bioorthogonal Azide-Thioalkyne Cycloaddition Catalyzed by Photoactivatable Ruthenium(II) Complexes

Tailored ruthenium sandwich complexes bearing photoresponsive arene ligands can efficiently promote azide–thioalkyne cycloaddition (RuAtAC) when irradiated with UV light. The reactions can be performed in a bioorthogonal manner in aqueous mixtures containing biological components. The strategy can also be applied for the selective modification of biopolymers, such as DNA or peptides. Importantly, this ruthenium‐based technology and the standard copper‐catalyzed azide–alkyne cycloaddition (CuAAC) proved to be compatible and mutually orthogonal.

Multifunctional TiO2/SBA-15 mesoporous silica hybrids loaded with organic sunscreens for skin application: The role in photoprotection and pollutant adsorption with reduced sunscreen permeation

TiO₂ acts as an inorganic sunscreen and photocatalyst to protect humans from environmental pollutants. We incorporated TiO₂ into mesoporous silica (SBA-15) for skin application to prevent environmental stresses including UVA irradiation and pollutant invasion. Organic ultraviolet (UV)A filters such as avobenzone and oxybenzone were then loaded into mesoporous support for synergistic sunscreen efficiency. The as-prepared formulations with different TiO₂ amounts (10 %-50 %) were fabricated. The pore size decreased from 4.72 to 4.00 nm following the increase in TiO₂ percentage. TiO₂/SBA-15 captured about 60 % fluoranthene and 80 % furfural within 3 h with no significant difference due to different TiO₂ content. The in vitro photoprotection assessed by UVA/UVB ratio exhibited the increase in Boots star rating from 2 to 3 to 5 by entrapment of avobenzone into TiO₂/SBA-15. Thirty-percent TiO₂/SBA-15 in hydrogel decreased avobenzone and oxybenzone deposition by 70 % and 80 % compared to free form, respectively. Avobenzone and TiO₂ supplementation to SBA-15 significantly alleviated skin cell death and neutrophil recruitment in the photoaged mouse skin compared to the SBA-15 application alone. Compared to the UVA-irradiated skin, 30 % TiO₂/SBA-15 showed a 2.5- and 3.1-fold decline in IL-1β and IL-6 levels, respectively. The TiO₂/SBA-15 hybrid was considered non-irritant based on results of cytotoxicity assay, skin histology, and cutaneous barrier function. Our data indicate that the versatile mesoporous silica is an effective system for topical use in sunscreen and skin protection.

Remote Activation of Hollow Nanoreactors for Heterogeneous Photocatalysis in Biorelevant Media

Major current challenges in nano-biotechnology and nano-biomedicine include the implementation of predesigned chemical reactions in biological environments. In this context, heterogeneous catalysis is emerging as a promising approach to extend the richness of organic chemistry onto the complex environments inherent to living systems. Herein we report the design and synthesis of hybrid heterogeneous catalysts capable of being remotely activated by near-infrared (NIR) light for the performance of selective photocatalytic chemical transformations in biological media. This strategy is based on the synergistic integration of Au and TiO₂ nanoparticles within mesoporous hollow silica capsules, thus permitting an efficient hot-electron injection from the metal to the semiconductor within the interior of the capsule that leads to a confined production of reactive oxygen species. These hybrid materials can also work as smart NIR-responsive nanoreactors inside living mammalian cells, a cutting-edge advance toward the development of photoresponsive theranostic platforms.

Heterogeneous Photocatalysis Scalability for Environmental Remediation: Opportunities and Challenges

Heterogeneous photocatalysis is an ecofriendly technique for purifying organic pollutants in environmental systems. While pilot-scale photoreactors have explored photocatalytic system upscalibility, their practical implementation is restricted for various reasons. These include feed composition alteration, complicated photoreactor designs, high operation and synthesis costs, photocatalyst poisoning, low quantum yield under solar irradiation, fast exciton recombination, and low reuse or regeneration capabilities. In this paper, we highlight the photocatalyst scalability challenges for real-world applications. We also provide an in-depth discussion on photocatalyst opportunities for effective air and water pollution control. Lastly, we offer a contemporary perspective on photocatalysis scale-up for the real environmental treatment.