Lessons in Organic Fluorescent Probe Discovery

A comparative study of two thienopyrimidine Schiff base probes for sequential monitoring of Ga3+ and Pd2

Two Schiff base probes (S1 and S2) were prepared and synthesized by incorporating thienopyrimidine into salicylaldehyde or 3-ethoxysalicylaldehyde individually, with the aim of detecting Ga3+ and Pd2+ sequentially. Upon chelation with Ga3+, S1 and S2 exhibited fluorescence enhancement in DMSO/H2O buffer. Both S1-Ga3+ and S2-Ga3+ were quenched by Pd2+. The limit of detection for S1 in response to Ga3+ and Pd2+ was 2.86 × 10-7 and 4.4 × 10-9 M, respectively. For S2, the limit of detection for Ga3+ and Pd2+ was 4.15 × 10-8 and 3.0 × 10-9 M, respectively. Furthermore, the complexation ratios of both S1 and S2 with Ga3+ and Pd2+ were determined to be 1:2 through Job's plots, ESI-MS analysis, and theoretical calculations. Two molecular logic gates were constructed, leveraging the response behaviors of S1 and S2. Moreover, the potential utility of S1 and S2 for monitoring Ga3+ and Pd2+ in domestic water was verified.

N-Aryl-DABCO Salts as an Unprecedented Sensing Platform for the Detection of Thiols and Selenols

Quaternary N-aryl-DABCO salts were introduced for the first time as a highly selective sensing platform for thiols and selenols. By employing this platform, a highly sensitive coumarin based "off-on" fluorescent probe was designed and synthesized. The probe possesses a good solubility in water, low background fluorescence, and, most importantly, demonstrates high selectivity to aryl thiols and selenols over their aliphatic counterparts and other common nucleophiles. A dramatic increase in fluorescence intensity is achieved through the selective cleavage of the quaternized DABCO-ring, yielding a piperazine derivatives with a high fluorescence quantum yield (~72 %). Moreover, stability of the probe to the most used reducing agents DTT and TCEP was demonstrated. The limits of detection for p-thiocresol and phenyl selenide were evaluated to be 22 nM and 6 nM, respectively.

Nanoparticles of Push-Pull Triphenylamine-Based Molecules for Light-Controlled Stimulation of Neuronal Activity

Organic semiconductor materials with a unique set of properties are very attractive for interfacing biological objects and can be used for noninvasive therapy or detection of biological signals. Here, we describe the synthesis and investigation of a novel series of organic push-pull conjugated molecules with the star-shaped architecture, consisting of triphenylamine as a branching electron donor core linked through the thiophene π-spacer to electron-withdrawing alkyl-dicyanovinyl groups. The molecules could form stable aqueous dispersions of nanoparticles (NPs) without the addition of any surfactants or amphiphilic polymer matrixes with the average size distribution varying from 40 to 120 nm and absorption spectra very similar to those of human eye retina pigments such as rods and green cones. Variation of the terminal alkyl chain length of the molecules forming NPs from 1 to 12 carbon atoms was found to be an efficient tool to modulate their lipophilic and biological properties. Possibilities of using the NPs as light nanoactuators in biological systems or as artificial pigments for therapy of degenerative retinal diseases were studied both on the model planar bilayer lipid membranes and on the rat cortical neurons. In the planar bilayer system, the photodynamic activity of these NPs led to photoinactivation of ion channels formed by pentadecapeptide gramicidin A. Treatment of rat cortical neurons with the NPs caused depolarization of cell membranes upon light irradiation, which could also be due to the photodynamic activity of the NPs. The results of the work gave more insight into the mechanisms of light-controlled stimulation of neuronal activity and for the first time showed that fine-tuning of the lipophilic affinity of NPs based on organic conjugated molecules is of high importance for creating a bioelectronic interface for biomedical applications.

Recent design strategies and applications of organic fluorescent probes for food freshness detection

Food spoilage poses a significant risk to human health, making the assessment of food freshness essential for ensuring food safety and quality. In recent years, there has been rapid progress in the development of fast detection technologies for food freshness. Among them, organic fluorescent probes have garnered significant attention in the field of food safety and sensing due to their easy functionalization, high sensitivity, and user-friendly nature. To comprehensively examine the latest advancements in organic fluorescent probes for food freshness detection, this review summarized their applications within the past five years. Initially, the fundamental detection principles of organic fluorescent probes are outlined. Subsequently, the recent research progress in utilizing organic fluorescent probes to detect various chemical indicators of freshness are discussed. Finally, the challenges and future directions for organic fluorescent probes in food freshness detection are elaborated upon. While, organic fluorescent probes have demonstrated their effectiveness in evaluating food freshness and possess great potential for practical applications, further research is still needed to enable their widespread commercial utilization. With continued advancements in synthesis and functionalization techniques, organic fluorescent probes will contribute to enhancing the efficiency of food safety detection.

Synthesis of Pyridin-1(2H)-ylacrylates and the Effects of Different Functional Groups on Their Fluorescence

While fluorescent organic materials have many potential as well as proven applications and so have attracted significant attention, pyridine-olefin conjugates remain a less studied subset of such systems. Herein, therefore, we report on the development of the straightforward syntheses of pyridin-1(2H)-ylacrylates and the outcomes of a study of the effects of substituents on their fluorescent properties. Such compounds were prepared using a simple, metal-free and three-component coupling reaction involving 2-aminopyridines, sulfonyl azides and propiolates. The fluorescent properties of the ensuing products are significantly affected by the positions of substituents on the cyclic framework, with those located in central positions having the greatest impact. Electron-withdrawing groups tend to induce blue shifts while electron-donating ones cause red shifts. This work highlights the capacity that the micro-modification of fluorescent materials provides for fine-tuning their properties such that they may be usefully applied to, for example, the study of luminescent materials.

Recent Progress on Fluorescent Probes in Heavy Metal Determinations for Food Safety: A Review

One of the main challenges faced in food safety is the accumulation of toxic heavy metals from environmental sources, which can sequentially endanger human health when they are consumed. It is invaluable to establish a practical assay for the determination of heavy metals for food safety. Among the current detection methods, technology based on fluorescent probes, with the advantages of sensitivity, convenience, accuracy, cost, and reliability, has recently shown pluralistic applications in the food industry, which is significant to ensure food safety. Hence, this review systematically presents the recent progress on novel fluorescent probes in determining heavy metals for food safety over the past five years, according to fluorophores and newly emerging sensing cores, which could contribute to broadening the prospects of fluorescent materials and establishing more practical assays for heavy metal determinations.

Biocompatible 7-nitro-2,1,3-benzoxadiazole-embedded naphthalimide for exploring endogenous H2S in living cells

Hydrogen sulfide (H₂S) is a central signaling and antioxidant biomolecule involved in various biological processes. As inappropriate levels of H₂S in the human body are closely related to various diseases, including cancer, a tool capable of detecting H₂S with high selectivity and sensitivity in living systems is urgently required. In this work, we intended to develop a biocompatible and activatable fluorescent molecular probe for detecting H₂S generation in living cells. The 7-nitro-2,1,3-benzoxadiazole-imbedded naphthalimide (1) probe presented here responds specifically to H₂S and produces readily detectable fluorescence at 530 nm. Interestingly, probe 1 exhibited significant fluorescence responses to changes in endogenous H₂S levels as well as high biocompatibility and permeability in living HeLa cells. This allowed for the real-time monitoring of endogenous H₂S generation as an antioxidant defense response in the oxidatively stressed cells.

Synthesis, characterisation and biological evaluation of monometallic Re(I) and heterobimetallic Re(I)/Fe(II) complexes with a 1,2,3-triazolyl pyridine chelating moiety

Bioorganometallic complexes have attracted considerable interest and have shown promise for potential application in the treatment and diagnosis of cancer, as well as bioimaging agents, some acting as theranostic agents. The series of novel ferrocene, benzimidazo[1,2-a]quinoline and fluorescein derivatives with bidentate pyridyl-1,2,3-triazole and 2,2'-dipyridylamine and their tricarbonylrhenium(I) complexes was prepared and fully characterised by NMR, single-crystal X-ray diffraction, UV-Vis and fluorescence spectroscopy in biorelevant conditions. The fluorescein and benzimidazo[1,2-a]quinoline ligands and their complexes with Re(I) showed interactions with ds-DNA/RNA and HSA, characterised by thermal denaturation measurements, fluorimetric and circular dichroism titrations. The binding constants revealed that addition of Re(I) increases the affinity of fluorescein but decreases the affinity of benzimidazo[1,2-a]quinoline. The complexation of Re(I) had the opposite effect on fluorescein and benzimidazo[1,2-a]quinoline ligands' fluorimetric sensitivity upon biomacromolecule binding, Re(I) fluorescein complex emission being strongly quenched by DNA/RNA or HSA, while emission of Re(I) benzimidazo[1,2-a]quinolone complex was enhanced, particularly for HSA, making it a promising fluorescent probe. Some mono- and heterobimetallic complexes showed considerable antiproliferative activity on colon cancer cells (CT26 and HT29), with ferrocene dipyridylamine complexes exhibiting the best inhibitory activity, comparable to cisplatin. The correlation of the cytotoxicity data with the linker type between the ferrocene and the 1,2,3-triazole ring suggests that direct binding of the metallocene to the 1,2,3-triazole is favourable for antitumor activity. The Re(I) benzimidazo[1,2-a]quinolone complex showed moderate antiproliferative activity, in contrast to the Re(I) fluorescein complex, which exhibited weak activity on CT26 cells and no activity on HT29 cells. The accumulation of the Re(I) benzimidazo[1,2-a]quinolone complex in the lysosomes of CT26 cells indicates the site of its bioactivity, thus making this complex a potential theranostic agent.

Deciphering the Biological Activities of Antifungal Agents with Chemical Probes

The growing number of fungal infections caused by pathogens resistant to one or more classes of antifungal drugs emphasizes the threat that these microorganisms pose to animal and human health and global food security. Open questions remain regarding the mechanisms of action of the limited repertoire of antifungal agents, making it challenging to rationally develop more efficacious therapeutics. In recent years, the use of chemical biology approaches has resolved some of these questions and has provided new promising concepts to guide the design of antifungal agents. By focusing on examples from studies carried out in recent years, this minireview describes the key roles that probes based on antifungal agents and their derivatives have played in uncovering details about their activities, in detecting resistance, and in characterizing the interactions between these agents and their targets.

Site-directed late-stage diversification of macrocyclic nannocystins facilitating anticancer SAR and mode of action studies

Nannocystins are a family of 21-membered cyclodepsipeptides with excellent anticancer activity. However, their macrocyclic architecture poses a significant challenge to structure modification. Herein, this issue is addressed by leveraging the strategy of post-macrocyclization diversification. In particular, a novel serine-incorporating nannocystin was designed so that its appending hydroxyl group could diversify into a wide variety of side chain analogues. Such effort facilitated not only structure-activity correlation at the subdomain of interest, but also the development of a macrocyclic coumarin-labeled fluorescence probe. Uptake experiments indicated good cell permeability of the probe, and endoplasmic reticulum was identified as its subcellular localization site.

Fluorescence-Activating and Absorption-Shifting Nanoprobes for Anaerobic Tracking of Gut Microbiota Derived Vesicles

Outer membrane vesicles (OMVs) are crucial for bacterial intercellular communication and the crosstalk between the gut microbiota and its host. Methods capable of visualizing gut microbiota derived OMVs would be of great significance but have been rarely reported. Here, nanoprobes carrying a fluorescence-activating and absorption-shifting tag are prepared by combining genetic engineering and antibiotic-boosted vesicle formation and release. Benefiting from their natural structure and molecular oxygen-independent emission, the resulting nanovesicles can be applied as endogenous fluorescence probes to anaerobically track gut microbiota associated OMVs. These nanoprobes show flexibility in on-demand fluorescence turn-on/off and reversibly switchable emission bands for intelligent and dual-color imaging. With these special characteristics, the behaviors of microbiota OMVs to not only inhibit specific pathogenic strains through membrane fusion but also repair the intestinal barrier via entering intestinal epithelia and promoting the expressions of tight junctions are tracked and identified in the gut. Based on these discoveries, OMVs are disclosed to be able to remit inflammation in a murine model of colitis following transplantation to the intestine by oral delivery. This work provides an approach to visualize the dynamics of the gut microbiota and disclose potential targets for disease intervention.

Common xanthene fluorescent dyes are visible-light activatable CO-releasing molecules

Fluorescein, eosin Y, and rose bengal are dyes used in clinical medicine and considered (photo-)chemically stable. Upon extensive irradiation with visible light in aqueous solutions, we found that these compounds release carbon monoxide (CO) - a bioactive gasotransmitter - in 40-100% yields along with the production of low-mass secondary photoproducts, such as phthalic and formic acids, in a multistep degradation process. Such photochemistry should be considered in applications of these dyes, and they could also be utilized as visible-light activatable CO-releasing molecules (photoCORMs) with biological implications.

Using diketopyrrolopyrroles to stabilize double excitation and control internal conversion

Diketopyrrolopyrrole (DPP) is a pivotal functional group to tune the physicochemical properties of novel organic photoelectronic materials. Among multiple uses, DPP-thiophene derivatives forming a dimer through a vinyl linker were recently shown to quench the fluorescence observed in their isolated monomers. Here, we explain this fluorescence quenching using computational chemistry. The DPP-thiophene dimer has a low-lying doubly excited state that is not energetically accessible for the monomer. This state delays the fluorescence allowing internal conversion to occur first. We characterize the doubly excited state wavefunction by systematically changing the derivatives to tune the π-scaffold size and the acceptor and donor characters. The origin of this state's stabilization is related to the increase in the π-system and not to the charge-transfer features. This analysis delivers core conceptual information on the electronic properties of organic chromophores arranged symmetrically around a vinyl linker, opening new ways to control the balance between luminescence and internal conversion.

Medicinal chemical optimization of fluorescent pyrrole-based COX-2 probes

Recent studies have demonstrated the ability of human prostaglandin-endoperoxide synthase 2 (COX-2) to guide the formation of fluorescent pyrroles through the Paal-Knorr reaction resulting in the discovery of a central motif. This initial discovery prompted further exploration of this motif for the design of COX-2 inhibitors through the modifications of the substituents on the pyrrole core. This effort led to the discovery of a set of pyrroles whose activity was comparable to Celecoxib, an orally prescribed nonsteroidal anti-inflammatory COX-2 inhibitor. Furthermore, structure-activity relationship (SAR) data, important for the discovery of COX-2 inhibitors, has been obtained.

Thermal Stability of Fluorescent Chitosan Modified with Heterocyclic Aromatic Dyes

Fluorescent biopolymer derivatives are increasingly used in biology and medicine, but their resistance to heat and UV radiation, which are sterilizing agents, is relatively unknown. In this work, chitosan (CS) modified by three different heterocyclic aromatic dyes based on benzimidazole, benzothiazole, and benzoxazole (assigned as IBm, BTh, and BOx) has been studied. The thermal properties of these CS derivatives have been determined using the Thermogravimetric Analysis coupled with the Fourier Transform Infrared spectroscopy of volatile degradation products. The influence of UV radiation on the thermal resistance of modified, fluorescent chitosan samples was also investigated. Based on the temperature onset as well as the decomposition temperatures at a maximal rate, IBm was found to be more thermally stable than BOx and BTh. However, this dye gave off the most volatile products (mainly water, ammonia, carbon oxides, and carbonyl/ether compounds). The substitution of dyes for chitosan changes its thermal stability slightly. Characteristic decomposition temperatures in modified CS vary by a few degrees (<10 °C) from the virgin sample. Considering the temperatures of the main decomposition stage, CS-BOx turned out to be the most stable. The UV irradiation of chitosan derivatives leads to minor changes in the thermal parameters and a decrease in the number of volatile degradation products. It was concluded that the obtained CS derivatives are characterized by good resistance to heat and UV irradiation, which extends the possibilities of using these innovative materials.

Three-component assembly of stabilized fluorescent isoindoles

The tandem addition of an amine and a thiol to an aromatic dialdehyde engages a selective three-component assembly of a fluorescent isoindole. While an attractive approach for diversity-based fluorophore discovery, isoindoles are typically unstable and present considerable challenges for their practical utility. We found that introduction of electron-withdrawing substituents into the dialdehyde component affords stable isoindole products in one step with acceptable yields and high purity.