Discovery of novel tyrosine ammonia lyases for the enzymatic synthesis of p-coumaric acid

Joint GWAS and WGCNA Identify Genes Regulating the Isoflavone Content in Soybean Seeds

Isoflavone is a secondary metabolite of the soybean phenylpropyl biosynthesis pathway with physiological activity and is beneficial to human health. In this study, the isoflavone content of 205 soybean germplasm resources from 3 locations in 2020 showed wide phenotypic variation. A joint genome-wide association study (GWAS) and weighted gene coexpression network analysis (WGCNA) identified 33 single-nucleotide polymorphisms and 11 key genes associated with soybean isoflavone content. Gene ontology enrichment analysis, gene coexpression, and haplotype analysis revealed natural variations in the Glyma.12G109800 (GmOMT7) gene and promoter region, with Hap1 being the elite haplotype. Transient overexpression and knockout of GmOMT7 increased and decreased the isoflavone content, respectively, in hairy roots. The combination of GWAS and WGCNA effectively revealed the genetic basis of soybean isoflavone and identified potential genes affecting isoflavone synthesis and accumulation in soybean, providing a valuable basis for the functional study of soybean isoflavone.

Systems engineering Escherichia coli for efficient production p-coumaric acid from glucose

P-coumaric acid (p-CA), a pant metabolite with antioxidant and anti-inflammatory activity, is extensively utilized in biomedicine, food, and cosmetics industry. In this study, a synthetic pathway (PAL) for p-CA was designed, integrating three enzymes (AtPAL2, AtC4H, AtATR2) into a higher l-phenylalanine-producing strain Escherichia coli PHE05. However, the lower soluble expression and activity of AtC4H in the PAL pathway was a bottleneck for increasing p-CA titers. To overcome this limitation, the soluble expression of AtC4H was enhanced through N-terminal modifications. And an optimal mutant, AtC4HL373T/G211H, which exhibited a 4.3-fold higher kcat/Km value compared to the wild type, was developed. In addition, metabolic engineering strategies were employed to increase the intracellular NADPH pool. Overexpression of ppnk in engineered E. coli PHCA20 led to a 13.9-folds, 1.3-folds, and 29.1% in NADPH content, the NADPH/NADP+ ratio and p-CA titer, respectively. These optimizations significantly enhance p-CA production, in a 5-L fermenter using fed-batch fermentation, the p-CA titer, yield and productivity of engineered strain E. coli PHCA20 were 3.09 g/L, 20.01 mg/g glucose, and 49.05 mg/L/h, respectively. The results presented here provide a novel way to efficiently produce the plant metabolites using an industrial strain.

Rational Engineering of Escherichia coli Nissle 1917 as Live Biotherapeutic to Degrade Uremic Toxin Precursors

Uremic toxins (UTs) are microbiota-derived metabolites that accelerate the progression of kidney damage in patients with chronic kidney disease (CKD). One of the major UTs involved in CKD progression is p-cresol-sulfate (PCS), derived from dietary l-tyrosine (l-Tyr). Here, we engineered a probiotic strain of Escherichia coli Nissle 1917, to convert l-Tyr to the nontoxic compound p-coumaric acid via tyrosine ammonia lyase (TAL). First, a small metagenomic library was assessed to identify the TAL with the greatest whole-cell activity. Second, accessory genes implicated in the import of l-Tyr and export of PCA were overexpressed to enhance l-Tyr degradation by 106% and 56%, respectively. Last, random mutagenesis coupled to a novel selection and screening strategy was developed that identified a TAL variant with a 25% increase in whole-cell activity. Taken together, the final strain exhibits a 183% improvement over initial whole-cell activity and provides a promising candidate to degrade l-Tyr mediated PCS accumulation.

Simple phenylpropanoids: recent advances in biological activities, biosynthetic pathways, and microbial production

Covering: 2000 to 2023Simple phenylpropanoids are a large group of natural products with primary C6-C3 skeletons. They are not only important biomolecules for plant growth but also crucial chemicals for high-value industries, including fragrances, nutraceuticals, biomaterials, and pharmaceuticals. However, with the growing global demand for simple phenylpropanoids, direct plant extraction or chemical synthesis often struggles to meet current needs in terms of yield, titre, cost, and environmental impact. Benefiting from the rapid development of metabolic engineering and synthetic biology, microbial production of natural products from inexpensive and renewable sources provides a feasible solution for sustainable supply. This review outlines the biological activities of simple phenylpropanoids, compares their biosynthetic pathways in different species (plants, bacteria, and fungi), and summarises key research on the microbial production of simple phenylpropanoids over the last decade, with a focus on engineering strategies that seem to hold most potential for further development. Moreover, constructive solutions to the current challenges and future perspectives for industrial production of phenylpropanoids are presented.

UniKP: a unified framework for the prediction of enzyme kinetic parameters

Prediction of enzyme kinetic parameters is essential for designing and optimizing enzymes for various biotechnological and industrial applications, but the limited performance of current prediction tools on diverse tasks hinders their practical applications. Here, we introduce UniKP, a unified framework based on pretrained language models for the prediction of enzyme kinetic parameters, including enzyme turnover number (kcat), Michaelis constant (Km), and catalytic efficiency (kcat / Km), from protein sequences and substrate structures. A two-layer framework derived from UniKP (EF-UniKP) has also been proposed to allow robust kcat prediction in considering environmental factors, including pH and temperature. In addition, four representative re-weighting methods are systematically explored to successfully reduce the prediction error in high-value prediction tasks. We have demonstrated the application of UniKP and EF-UniKP in several enzyme discovery and directed evolution tasks, leading to the identification of new enzymes and enzyme mutants with higher activity. UniKP is a valuable tool for deciphering the mechanisms of enzyme kinetics and enables novel insights into enzyme engineering and their industrial applications.

Exploring the Substrate Switch Motif of Aromatic Ammonia Lyases

Aromatic ammonia lyases (AALs) are important enzymes for biocatalysis as they enable the asymmetric synthesis of chiral l-α-amino acids from the corresponding α,β-unsaturated precursors. AALs have very similar protein structures and active site pockets but exhibit strict substrate specificity towards tyrosine, phenylalanine, or histidine. Herein, through systematic bioinformatics and structural analysis, we discovered eight new motifs of amino acid residues in AALs. After introducing them - as well as four already known motifs - into different AALs, we learned that altering the substrate specificity by engineering the substrate switch motif in phenylalanine ammonia lyases (PALs), phenylalanine/tyrosine ammonia lyases (PTALs), and tyrosine ammonia lyases (TALs) was only partially successful. However, we discovered that three previously unknown residue combinations introduced a substrate switch from tyrosine to phenylalanine in TAL, which was converted up to 20-fold better compared to the wild-type TAL enzyme.

Characterization of tyrosine ammonia lyases from Flavobacterium johnsonian and Herpetosiphon aurantiacus

p-Coumaric acid (pCA) can be produced via bioprocessing and is a promising chemical precursor to making organic thin film transistors. However, the required tyrosine ammonia lyase (TAL) enzyme generally has a low specific activity and suffers from competitive product inhibition. Here we characterized the purified TAL variants from Flavobacterium johnsoniae and Herpetosiphon aurantiacus in terms of their susceptibility to product inhibition and their activity and stability across pH and temperature via initial rate experiments. FjTAL was found to be more active than previously described and to have a relatively weak affinity for pCA, but modeling revealed that product inhibition would still be problematic at industrially relevant product concentrations, due to the low solubility of the substrate tyrosine. The activity of both variants increased with temperature when tested up to 45°C, but HaTAL1 was more stable at elevated temperature. FjTAL is a promising biocatalyst for pCA production, but enzyme or bioprocess engineering are required to stabilize FjTAL and reduce product inhibition.

Engineering a Pseudomonas taiwanensis 4-coumarate platform for production of para-hydroxy aromatics with high yield and specificity

Aromatics are valuable bulk or fine chemicals with a myriad of important applications. Currently, their vast majority is produced from petroleum associated with many negative aspects. The bio-based synthesis of aromatics contributes to the much-required shift towards a sustainable economy. To this end, microbial whole-cell catalysis is a promising strategy allowing the valorization of abundant feedstocks derived from biomass to yield de novo-synthesized aromatics. Here, we engineered tyrosine-overproducing derivatives of the streamlined chassis strain Pseudomonas taiwanensis GRC3 for efficient and specific production of 4-coumarate and derived aromatics. This required pathway optimization to avoid the accumulation of tyrosine or trans-cinnamate as byproducts. Although application of tyrosine-specific ammonia-lyases prevented the formation of trans-cinnamate, they did not completely convert tyrosine to 4-coumarate, thereby displaying a significant bottleneck. The use of a fast but unspecific phenylalanine/tyrosine ammonia-lyase from Rhodosporidium toruloides (RtPAL) alleviated this bottleneck, but caused phenylalanine conversion to trans-cinnamate. This byproduct formation was greatly reduced through the reverse engineering of a point mutation in prephenate dehydratase domain-encoding pheA. This upstream pathway engineering enabled efficient 4-coumarate production with a specificity of >95% despite using an unspecific ammonia-lyase, without creating an auxotrophy. In shake flask batch cultivations, 4-coumarate yields of up to 21.5% (Cmol/Cmol) from glucose and 32.4% (Cmol/Cmol) from glycerol were achieved. Additionally, the product spectrum was diversified by extending the 4-coumarate biosynthetic pathway to enable the production of 4-vinylphenol, 4-hydroxyphenylacetate, and 4-hydroxybenzoate with yields of 32.0, 23.0, and 34.8% (Cmol/Cmol) from glycerol, respectively.

Combining Cell-Free Expression and Multifactor Optimization for Enhanced Biosynthesis of Cinnamyl Alcohol

Cell-free expression systems have emerged as a potent and promising platform for the biosynthesis of chemicals by reconstituting in vitro expressed enzymes. Here, we report cell-free biosynthesis of cinnamyl alcohol (cinOH) with enhanced productivity by using the Plackett-Burman experimental design for multifactor optimization. Initially, four enzymes were individually expressed in vitro and directly mixed to reconstitute a biosynthetic route for the synthesis of cinOH. Then, the Plackett-Burman experimental design was used to screen multiple reaction factors and found three crucial parameters (i.e., reaction temperature, reaction volume, and carboxylic acid reductase) for the cinOH production. With the optimum reaction conditions, approximately 300 μM of cinOH was synthesized after 10 h of cell-free biosynthesis. Extending the production time to 24 h also increased the production to a maximum yield of 807 μM, which is nearly 10 times higher than the initial yield without optimization. This study demonstrates that cell-free biosynthesis can be combined with other powerful optimization methodologies such as the Plackett-Burman experimental design for enhanced production of valuable chemicals.