Important roles of coarse particles in pasting and gelling performance of different pulse flours under high-temperature heating

Dehulled pea, lentil, and faba bean grains were milled into flours with 0.5- to 2.5-mm sieves. As the particle size decreased, damaged-starch contents of the flours from the same pulse crop increased. At a holding temperature of 95 °C in RVA, peak and final viscosities and gelling ability of the flours generally increased as the particle size decreased. When the holding temperature increased from 95 to 140 °C, pasting viscosities of pea and lentil flours and gel hardness of lentil flours gradually decreased. In contrast, pasting viscosities and gel hardness of faba bean flours reached the highest values at 120 °C. The comparison of the pulse flours varying in particle size across the three market classes revealed that coarse particles comprising agglomerated starch, protein, and dietary fiber (i.e., particles of the second peak in the bimodal particle-size distribution curves) showed significant correlations with certain important functional properties of pulse flours.

Dry fractionation process operations in the production of protein concentrates: A review

The market for plant proteins is expanding rapidly as the negative impacts of animal agriculture on the environment and resources become more evident. Plant proteins offer competitive advantages in production costs, energy requirements, and sustainability. Conventional plant-protein extraction is water and chemical-intensive, posing environmental concerns. Dry fractionation is an energy-efficient and environmentally friendly process for protein separation, preserving protein's native functionality. Cereals and pulses are excellent sources of plant proteins as they are widely grown worldwide. This paper provides a comprehensive review of the dry fractionation process utilized for different seeds to obtain protein-rich fractions with high purity and functionality. Pretreatments, such as dehulling and defatting, are known to enhance the protein separation efficiency. Factors, such as milling speed, mill classifier speed, feed rate, seed type, and hardness, were crucial for obtaining parent flour of desired particle size distribution during milling. The air classification or electrostatic separation settings are crucial in determining the quality of the separated protein. The cut point in air classification is targeted based on the starch granule size of the seed material. Optimization of these operations, applied to different pulses and seeds, led to higher yields of proteins with higher purity. Dual techniques, such as air classification and electrostatic separation, enhance protein purity. The yield of the protein concentrates can be increased by recycling the coarse fractions. Further research is necessary to improve the quality, purity, and yield of protein concentrates to enable more efficient use of plant proteins to meet global protein demands.

A Comprehensive Review of Pea (Pisum sativum L.): Chemical Composition, Processing, Health Benefits, and Food Applications

Pisum sativum L., commonly referred to as dry, green, or field pea, is one of the most common legumes that is popular and economically important. Due to its richness in a variety of nutritional and bioactive ingredients, the consumption of pea has been suggested to be associated with a wide range of health benefits, and there has been increasing focus on its potential as a functional food. However, there have been limited literature reviews concerning the bioactive compounds, health-promoting effects, and potential applications of pea up to now. This review, therefore, summarizes the literature from the last ten years regarding the chemical composition, physicochemical properties, processing, health benefits, and potential applications of pea. Whole peas are rich in macronutrients, including proteins, starches, dietary fiber, and non-starch polysaccharides. In addition, polyphenols, especially flavonoids and phenolic acids, are important bioactive ingredients that are mainly distributed in the pea coats. Anti-nutritional factors, such as phytic acid, lectin, and trypsin inhibitors, may hinder nutrient absorption. Whole pea seeds can be processed by different techniques such as drying, milling, soaking, and cooking to improve their functional properties. In addition, physicochemical and functional properties of pea starches and pea proteins can be improved by chemical, physical, enzymatic, and combined modification methods. Owing to the multiple bioactive ingredients in peas, the pea and its products exhibit various health benefits, such as antioxidant, anti-inflammatory, antimicrobial, anti-renal fibrosis, and regulation of metabolic syndrome effects. Peas have been processed into various products such as pea beverages, germinated pea products, pea flour-incorporated products, pea-based meat alternatives, and encapsulation and packing materials. Furthermore, recommendations are also provided on how to better utilize peas to promote their development as a sustainable and functional grain. Pea and its components can be further developed into more valuable and nutritious products.

Milling and differential sieving to diversify flour functionality: A comparison between pulses and cereals

In this study, pulse (pea, lentil) and cereal (barley, oats) seeds were firstly milled into whole flours, which were then sieved into coarse and fine flours. The particle sizes of the three generated flour streams followed a descending order of coarse > whole > fine, consistent with the observation under scanning electron microscopy (SEM). Among the four crops, the three flour streams showed the same rank order of fine > whole > coarse in starch and damaged-starch contents but the opposite order in ash and total dietary fiber contents. Thus, those functional properties closely related to starch occurring in flour, such as L* (brightness), starch gelatinization enthalpy change (ΔH), and gel hardness, followed the same order of fine > whole > coarse. By contrast, protein contents of the three flour streams did not vary in pea and lentil but showed a trend of coarse > whole > fine in barley and oats, which could partially explain generally comparable foaming and emulsifying properties of the three streams of pulse flours as well as an order of coarse > whole > fine in oil-binding capacity (OBC) of cereal flours, respectively. The different particle sizes and chemical compositions of the three flour streams only resulted in a descending order of fine > whole > coarse in the pasting viscosities of the pulse flours but did not lead to such a clear trend in the cereal flours, which could be partly attributable to the different microscopic structures of the pulse and cereal seeds and their corresponding flours. This research clearly demonstrated that particle size, chemical composition, and microscopic structure were important variables determining the specific techno-functional properties of pulse and cereal flours.

Toward a comprehensive understanding of ultracentrifugal milling on the physicochemical properties and aromatic profile of yellow pea flour

Yellow pea (Pisum sativum L., YP) grain is generally milled into flour for further processing or direct consumption. However, the comprehensive relationship between milling configurations and YP flour properties remains unclear. The aim of this study is to investigate the effect of configurations (screen aperture size and rotor speed) of ultracentrifugal mill on the physicochemical properties and aromatic profiles of YP flours. Starch damage, morphology, particle size distribution, pasting, thermal property, and aromatic profiles of YP flours were studied. Results show that starch damage increased significantly as the screen aperture size decreased. The YP flour produced with a 500 µm aperture screen had the most stable pasting and thermal properties. With untargeted metabolomic approaches, 2-ethyl-1-hexanol could potentially be applied as an aroma maker to distinguish if an excessive milling or inappropriate configurations of ultracentrifugal mill are applied. This work has furnished fundamentals for the milling and application of YP flour.

Supercritical Carbon Dioxide + Ethanol Extraction to Improve Organoleptic Attributes of Pea Flour with Applications of Sensory Evaluation, HS-SPME-GC, and GC-Olfactory

Supercritical carbon dioxide + ethanol (SC-CO2+EtOH) extraction, was employed as a deflavoring method to improve the sensory properties of pea flours. Furthermore, the impacts of particle size along with extraction on volatile profile and sensory attributes of pea flours were investigated using multiple approaches. These included headspace solid-phase microextraction-gas chromatography (HS-SPME-GC), GC-olfactometry (GC-O), and quantitative descriptive analysis (QDA) using a trained sensory panel. Total volatile contents of non-deflavored and deflavored whole pea flour and its fractions were in the range of 7.1 ± 0.3 to 18.1 ± 1.0 µg/g and 0.4 ± 0.1 to 2.7 ± 0.4 µg/g, respectively. The GC-O system showed that the total volatile intensity was in the range of 14.5 to 22.0 and 0 to 3.5, for non-deflavored and deflavored pea flours, respectively. Volatile analyses indicated that 1-hexanol, 1-octanol, 1-nonanol, nonanal, and 2-alkyl methoxypyrazines were major off-aroma compounds. Most off-aroma compounds were not detected in deflavored pea flours. QDA revealed less pea intensity and bitterness of deflavored pea flours. The larger particle size of flours resulted in less off-aroma compounds based on the GC data but more bitterness based on QDA. The SC-CO2+EtOH extraction at optimum conditions and particle size modifications can be a potential technology to improve the organoleptic properties of pulse ingredients.

Effect of germination on the chemical composition, thermal, pasting, and moisture sorption properties of flours from chickpea, lentil, and yellow pea

Chemical composition, thermal, pasting, and moisture adsorption properties of flours from chickpea (Cicer aretinium L.), lentil (Lens culinaris Merr.), and yellow pea (Pisum sativum L.) were investigated over a 6-day germination. Protein content increased for pulses over germination while lentil had the highest protein content that increased from 30.65 to 33.60 g/100 g dry basis (d.b.). Lipid content in pulse flours decreased over germination with chickpea having the greatest decline, i.e. from 8.00 to 5.90 g/100 g (d.b.). Total starch decreased in lentil and yellow pea flours during germination, while there was no significant change (p > 0.05) in germinated chickpea flours. Thermal properties of pulse flours changed slightly, while pasting properties varied among pulses. The highest final viscosities for chickpea, lentil, and yellow pea flours were 1061, 981, and 1052 cP and were observed after 2, 1, and 0 days of germination, respectively. Moisture adsorption isotherms showed improved water adsorption capability after germination.