Task-Specific Janus Materials in Heterogeneous Catalysis

Janus materials are anisotropic nano- and microarchitectures with two different faces consisting of distinguishable or opposite physicochemical properties. In parallel with the discovery of new methods for the fabrication of these materials, decisive progress has been made in their application, for example, in biological science, catalysis, pharmaceuticals, and, more recently, in battery technology. This Minireview systematically covers recent and significant achievements in the application of task-specific Janus nanomaterials as heterogeneous catalysts in various types of chemical reactions, including reduction, oxidative desulfurization and dye degradation, asymmetric catalysis, biomass transformation, cascade reactions, oxidation, transition-metal-catalyzed cross-coupling reactions, electro- and photocatalytic reactions, as well as gas-phase reactions. Finally, an outlook on possible future applications is given.

Dehydrogenative Coupling of Alkanes and Benzene Enhanced by Slurry-Phase Interparticle Hydrogen Transfer

The dehydrogenative coupling reaction of alkanes and benzene has attracted attention as a method of direct conversion of alkanes to raw materials for useful chemical products. Here, we report the first combined catalyst system composed of hydrotalcite-supported palladium and solid acid aluminum-exchanged montmorillonite for the direct alkylation of benzene promoted by slurry-phase interparticle hydrogen transfer at 150 °C. The combination of the two catalytic particles showed excellent activity and achieved the maximum benzene conversion of 21% and target product selectivity of 84% in the reaction of n-heptane and benzene. Our results, thus, provide a feasible strategy to design efficient liquid-phase reaction systems employing simple physical mixing of two catalytic particles.

Cooperative formation of porous silica and peptides on the prebiotic Earth

Modern technology has perfected the synthesis of catalysts such as zeolites and mesoporous silicas using organic structure directing agents (SDA) and their industrial use to catalyze a large variety of organic reactions within their pores. We suggest that early in prebiotic evolution, synergistic interplay arose between organic species in aqueous solution and silica formed from rocks by dynamic dissolution-recrystallization. The natural organics, for example, amino acids, small peptides, and fatty acids, acted as SDA for assembly of functional porous silica structures that induced further polymerization of amino acids and peptides, as well as other organic reactions. Positive feedback between synthesis and catalysis in the silica-organic system may have accelerated the early stages of abiotic evolution by increasing the formation of polymerized species.

Tuning acid–base cooperativity to create bifunctional fiber catalysts for one-pot tandem reactions in water

A simple and straightforward route to create acid–base bifunctional fiber catalysts for efficient one-pot tandem deprotection-Knoevenagel reactions in water.

Creation of discrete active site domains via mesoporous silica poly(styrene) composite materials for incompatible acid–base cascade reactions

Mesoporous silica/polymer hybrid materials catalyze a two-step acid and base cascade reaction. Catalyst design emphasizes compartmentalization of incompatible Lewis base and Brønsted acid catalysts by tuning polymer chain length and silica pore diameter.meter.

Homogeneous and heterogeneous catalysts for hydrogenation of CO2 to methanol under mild conditions

This review summarizes the concepts, mechanisms, drawbacks and challenges of the state-of-the-art catalysis for CO₂ to MeOH under mild conditions. Thoughtful guidelines and principles for future research are presented and discussed.

Functionalized cellulose nanofibril aerogels as cooperative acid-base organocatalysts for liquid flow reactions

Cellulose nanomaterial aerogels are macroscopic porous solids with relatively high surface areas and are thus an interesting basis for renewable catalyst materials. Cross-linked acid-base bifunctional catalyst aerogels are produced here from TEMPO-oxidized cellulose nanofibrils (TOCNF) and demonstrated in both batch and flow catalysis. Recently established acid-base modification for catalysis is expanded upon for chemical or physical cross-linking with small molecules and polymers. Low density and relatively high surface area (up to 74 m² g^-1) aerogel catalysts are produced with a variety of processing approaches and then freeze-dried from water or tert-butyl alcohol/water mixtures. Finer pore structure and increased surface area are achieved with tert-butyl alcohol as co-solvent. Chemical cross-linking improved aerogel stability to solvents. Homogeneous and aerogel TOCNF catalysts are shown to be effective acid-base cooperative catalysts for aldol condensation reactions in batch reactions. Continuous flow reactions are performed with glass column reactors packed with aerogel catalysts that showed improved rates relative to batch experiments, while also demonstrating physical stability. Catalyst deactivation in flow reactions is observed and observations of deactivation support previously reported mechanisms of site poisoning by competitive chemisorption of reactants in analogous acid-base catalysts. This report is a key demonstration of cellulose nanofibril aerogels for catalysis in continuous liquid flow reactions.

Reworking Organic Synthesis for the Modern Age: Synthetic Strategies Based on Continuous-Flow Addition and Condensation Reactions with Heterogeneous Catalysts

While organic synthesis carried out in most laboratories uses batch methods, there is growing interest in modernizing fine chemical synthesis through continuous-flow processes. As a synthetic method, flow processes have several advantages over batch systems in terms of environmental compatibility, efficiency, and safety, and recent advances have allowed for the synthesis of several complex molecules, including active pharmaceutical ingredients (APIs). Nevertheless, due to several reasons related to the difficulties arising from byproduct formation during the flow process, such as lower yields, poor selectivities, clogging of columns due to poor solubility, catalyst poisoning, etc., successful examples of continuous-flow synthesis of complex organic molecules are still limited. In order to solve this bottleneck, the development of selective and atom-economical continuous-flow organic transformations are needed. This perspective highlights examples of atom-economical addition and condensation reactions with heterogeneous catalysts under continuous-flow conditions and their applications for the synthesis of complex organic molecules such as natural products and APIs. In order to realize new continuous-flow methodologies, based on addition and condensation reactions, in place of substitution reactions, the development of novel reactions and heterogeneous catalysts is required.

Photoinduced Heterogeneous C-H Arylation by a Reusable Hybrid Copper Catalyst

Heterogeneous copper catalysis enabled photoinduced C-H arylations under exceedingly mild conditions at room temperature. The versatile hybrid copper catalyst provided step-economical access to arylated heteroarenes, terpenes and alkaloid natural products with various aryl halides. The hybrid copper catalyst could be reused without significant loss of catalytic efficacy. Detailed studies in terms of TEM, HRTEM and XPS analysis of the hybrid copper catalyst, among others, supported its outstanding stability and reusability.

Valorization of Waste: Sustainable Organocatalysts from Renewable Resources

One of the greatest challenges facing our society is to reconcile our need to develop efficient and sophisticated chemical processes with the limited resources of our planet and its restricted ability to adsorb pollution. Organocatalysis has allowed many issues to be addressed in the development of sophisticated, but less polluting, processes. However, minimizing waste also means an efficient utilization of raw and renewable materials. Waste biomass represents an alternative to conventional petroleum-based chemical manufacturing and is a highly attractive renewable resource for the production of chemicals and high-value-added organocatalysts. Recent achievements in the use of renewable biomass feedstocks for the synthesis of organocatalysts are presented. Their application in synthetic methodologies, including multicomponent reactions, which are performed under solvent-free conditions or in eco-friendly reaction media, as well as recycling and reusing the organocatalysts, is illustrated. A few pioneering examples that demonstrate the potential of these promoters in asymmetric synthesis have also been documented. In particular, this review covers examples on the use of hetero- and homogeneous organocatalysts derived from 1) waste biopolymers, such as chitosan, alginic acid, and cellulose; ii) renewable platform molecules, such as levoglucosenone, isosorbide, mannose, d-glucosamine, and lecithin; 3) terpenes and rosin, such as pinane, isosteviol, and abietic acid; and iv) natural proteins (gelatin, bovine tendons, silk fibroin proteins).

Physically mixed catalytic system of amino and sulfo-functional porous organic polymers as efficiently synergistic co-catalysts for one-pot cascade reactions

Acid/base bi-functional polymeric materials were prepared using physically mixed porous polymers P(DVB-VBS) with sulfonic acid and P(DVB-VBA) with amino groups for various cascade reactions.

Fluorescence spectroscopy studies of crossed aldol reactions: a reactive Nile red dye reveals catalyst-dependent product formation

A highly fluorescent, aldol-reactive derivative of the dye Nile red is synthesized and evaluated as an in situ probe of crossed aldol reactions.

Hollow Zn-Co Based Zeolitic Imidazole Framework as a Robust Heterogeneous Catalyst for Enhanced CO2 Chemical Fixation

The efficient chemical conversion of carbon dioxide (CO₂ ) into value-added fine chemicals is an intriguing but challenging route in sustainable chemistry. Herein, a hollow-structured bimetallic zeolitic imidazole framework composed of Zn and Co as metal centers (H-ZnCo-ZIF) has been successfully prepared via a post-synthetic strategy based on controllable chemical-etching of the preformed solid ZnCo-ZIF in tannic acid. The creation of hollow cavities inside each monocrystalline ZIFs could be achieved without destroying the intrinsic frameworks, as characterized by field-emission scanning electron microscopy, transmission electron microscopy, and X-ray diffraction technologies. The as-synthesized H-ZnCo-ZIF exhibited remarkable catalytic activity in the cycloaddition of CO₂ with epoxides to the corresponding cyclic carbonates, outperforming the solid ZnCo-ZIF analogue due to the improved mass transfer originating from the hollow structure. More importantly, due to stabilization of metal centers in the ZIF framework by the tannic acid shell, H-ZnCo-ZIF exhibited good recyclability, and no activity loss could be observed in six runs. The present study provides a simple and effective strategy to enhance the catalytic performance of ZIFs by creating a hollow structure via chemical etching.

Inter- and Intramolecular Cooperativity Effects in Alkanolamine-Based Acid-Base Heterogeneous Organocatalysts

Intramolecular cooperativity in heterogeneous organocatalysts is investigated using alkanolamine-functionalized silica acid-base catalysts for the aldol condensation reaction of 4-nitrobenzaldehyde and acetone. Two series of catalysts, one with and one without silanol-capping, are synthesized with varied alkyl linker lengths (two to five) connecting secondary amine and terminal hydroxyl functionalities. The reactivity of these catalysts is assessed to determine the relative potential for intermolecular (silane amine-surface silanol) vs intramolecular (amine-hydroxyl within a single silane) cooperativity, the impact of inhibitory surface-silane interactions, and the role of alkyl linker length and flexibility. For the array of catalysts tested, those with longer linker lengths generally give increased catalytic activity, although the turnover frequency trends differ between catalysts with and without surface silanol capping. Catalysts with alkyl-substituted amines lacking a terminal hydroxyl demonstrate an adverse effect of chain length, where the larger alkyl substituent on the amine provides steric hindrance depressing catalytic activity, while giving additional evidence for improved rates afforded by intramolecular cooperativity in the alkanolamine materials. The silanol-capped alkanolamine catalyst with the longest alkyl linker is found to be the most active alkanolamine catalyst due to its hydrophobized surface, which removes hypothesized silanol-alkanolamine inhibitory interactions, with the sufficient length and flexibility of its amine-hydroxyl linker allowing for favorable conformations for cooperativity. This study demonstrates the feasibility of and important factors affecting intramolecular cooperative activity in acid-base heterogeneous organocatalysis.

Amino- and sulfo-bifunctionalized hyper-crosslinked organic nanotube frameworks as efficient catalysts for one-pot cascade reactions

The synthesis of amino- and sulfo-bifunctionalized hyper-crosslinked organic nanotube frameworks for one-pot cascade reactions was reported for the first time.

Synthesis of discrete catalytic oligomers and their potential in silica-supported cooperative catalysis

The synthesis of discrete catalytic oligomers and their potential in supported cooperative catalysis are presented.

Double-shelled hollow mesoporous silica nanospheres as an acid–base bifunctional catalyst for cascade reactions

Double-shelled hollow mesoporous silica nanospheres as an acid–base bifunctional catalyst for cascade reactions.

A bifunctional cerium phosphate catalyst for chemoselective acetalization

A CePO₄ catalyst exhibits high catalytic performance for the chemoselective acetalization of 5-hydroxymethylfurfural with alcohols, in sharp contrast to other homogeneous and heterogeneous acid and/or base catalysts.

Acid–base solid catalysts synthesized with structurally controlled uniform active sites can lead to unique catalysis. In this study, a CePO₄ catalyst was synthesized using a hydrothermal method and found to exhibit high catalytic performance for the chemoselective acetalization of 5-hydroxymethylfurfural with alcohols, in sharp contrast to other homogeneous and heterogeneous acid and/or base catalysts. In the presence of CePO₄, various combinations of carbonyl compounds and alcohols are efficiently converted into the corresponding acetal derivatives in good to excellent yields. Mechanistic studies show that CePO₄ most likely acts as a bifunctional catalyst through the interaction of uniform Lewis acid and weak base sites with 5-hydroxymethylfurfural and alcohol molecules, respectively, which results in high catalytic performance.

Multifunctional supported bimetallic catalysts for a cascade reaction with hydrogen auto transfer: synthesis of 4-phenylbutan-2-ones from 4-methoxybenzyl alcohols

One pot synthesis of Raspberry Ketone Methyl Ether using a multifunctional AuPd supported on MgO catalyst.

Direct Estimation of the Surface Location of Immobilized Functional Groups for Concerted Catalysis Using a Probe Molecule

The location of active sites during concerted catalysis by a metal complex and tertiary amine on a SiO2 surface is discussed based on the interaction between the functionalized SiO2 surface and a probe molecule, p-formyl phenylboronic acid. The interactions of the probe molecule with the surface functionalities, diamine ligand, and tertiary amine, were analyzed by FT-IR and solid-state (13)C and (11)B MAS NMR. For the catalyst exhibiting high 1,4-addition activity, the diamine ligand and tertiary amine base exist in closer proximity than in the catalyst with low activity.

A trifunctional mesoporous silica-based, highly active catalyst for one-pot, three-step cascade reactions

We report the synthesis of a trifunctional catalyst containing amine, sulphonic acid and Pd nanoparticle catalytic groups anchored on the pore walls of SBA-15. The catalyst efficiently catalyzes one-pot three-step cascade reactions comprising deacetylation, Henry reaction and hydrogenation, giving up to ∼100% conversion and 92% selectivity to the final product.

One “Click” to controlled bifunctional supported catalysts for the Cu/TEMPO-catalyzed aerobic oxidation of alcohols

A modular strategy is described for the preparation and molecular engineering of multifunctional surfaces using CuAAC chemistry and is applied to the model Cu/TEMPO-catalyzed aerobic oxidation of benzyl alcohol.