Metal-Organic Frameworks as Biomimetic Catalysts

A cobalt(II) coordination polymer-derived catalyst engineered via temperature-induced semi-reversible single-crystal-to-single-crystal (SCSC) dehydration for efficient liquid-phase epoxidation of olefins

Single-crystal-to-single-crystal (SCSC) transformations provide more avenues for phase transitions, which have piqued great interest in crystal engineering. In this work, a 3D Co(II)-based coordination polymer (CP), {Co2(OH2)8(btec)}·4H2O (1), (where (btec)4- = 1,2,4,5-benzenetetracarboxylate) undergoes SCSC transition upon heating at 180 °C to afford an anhydrous phase [Co2(btec)] (1'). Room-temperature water-vapour induced semi-reversible SCSC transformation of 1' involves condensation of two water molecules coordinating to the metal cluster, yielding a new framework [Co2(OH2)2(btec)] (2). These SCSC transitions were accomplished through a sequential bond breaking and new bond formation process which was accompanied by colour changes from orange (1) → violet (1') → pink (2). All materials were structurally elucidated by single-crystal X-ray diffraction (SCXRD) and further established by various analytical techniques. According to SCXRD data, all the frameworks possess octahedral geometries around the cobalt(II) sphere. SCXRD studies further revealed that 1 is a polymeric architecture with a binodal 4-c sql topology while 1' and 2 possess (3,6)-c kgd and (4,6)-c scu 3D nets, respectively. By virtue of multitopicity exhibited by the tetracarboxylate, the coordination number of the linker around the Co(II) sphere increased from four (in 1) to eight (in 1') and then decreased to six (in 2). Most interestingly, permanent porosity could be observed for the dihydrate 2, originated from potential void space as substantiated by dinitrogen (N2) sorption isotherm. These porous frameworks were active catalysts for the aerobic epoxidation of the model substrate cyclohexene using molecular oxygen (O2) as the final oxidant in the presence of the sacrificial i-butyraldehyde (IBA) reductant. For using the dihydrous phase 2, cyclohexene and various other olefins were catalytically oxidised to their corresponding epoxides with up to 38.5% conversion and 99.0% selectivity. The catalyst 2 can be expediently recycled in four runs without significant loss of activity. This research demonstrates that a little innovation in the active-site-engineered organic-inorganic hybrid materials can significantly enhance the catalytic performance and selectivity of coordination polymer-derived heterogeneous catalysts.

Research Progress of SERS Sensors Based on Hydrogen Peroxide and Related Substances

Hydrogen peroxide (H2O2) has an important role in living organisms, and its detection is of great importance in medical, chemical, and food safety applications. This review provides a comparison of different types of Surface-enhanced Raman scattering (SERS) sensors for H2O2 and related substances with respect to their detection limits, which are of interest due to high sensitivity compared to conventional sensors. According to the latest research report, this review focuses on the sensing mechanism of different sensors and summarizes the linear range, detection limits, and cellular applications of new SERS sensors, and discusses the limitations in vivo and future prospects of SERS technology for the detection of H2O2.

MOFganic Chemistry: Challenges and Opportunities for Metal-Organic Frameworks in Synthetic Organic Chemistry

Metal-organic frameworks (MOFs) are porous, crystalline solids constructed from organic linkers and inorganic nodes that have been widely studied for applications in gas storage, chemical separations, and drug delivery. Owing to their highly modular structures and tunable pore environments, we propose that MOFs have significant untapped potential as catalysts and reagents relevant to the synthesis of next-generation therapeutics. Herein, we outline the properties of MOFs that make them promising for applications in synthetic organic chemistry, including new reactivity and selectivity, enhanced robustness, and user-friendly preparation. In addition, we outline the challenges facing the field and propose new directions to maximize the utility of MOFs for drug synthesis. This perspective aims to bring together the organic and MOF communities to develop new heterogeneous platforms capable of achieving synthetic transformations that cannot be replicated by homogeneous systems.

Optimization of the tandem enzyme activity of V-MOF and its derivatives for highly sensitive nonenzymatic detection of cholesterol in living cells

It remains a great challenge to properly design and synthesize single-component artificial tandem enzymes for specific substrates with high selectivity. Herein, V-MOF is synthesized by solvothermal method and its derivatives are constructed via pyrolyzing V-MOF in nitrogen atmosphere at different temperatures, which are denoted as V-MOF-y (y = 300, 400, 500, 700 and 800). V-MOF and V-MOF-y possess tandem enzyme-like activity, i.e. cholesterol oxidase-like and peroxidase-like activity. Among them, V-MOF-700 shows the strongest tandem enzyme activity for V-N bonds. Based on the cascade enzyme activity of V-MOF-700, the nonenzymatic detection platform for cholesterol by fluorescent assay can be established in the presence of o-phenylenediamine (OPD) for the first time. The detection mechanism is that V-MOF-700 catalyzes cholesterol to generate hydrogen peroxide and further form hydroxyl radical (•OH), which can oxidize OPD to obtain oxidized OPD (oxOPD) with yellow fluorescence. The linear detection of cholesterol ranges of 2-70 μM and 70-160 μM with a lower detection limit of 0.38 μM (S/N = 3) are obtained. This method is used to detect cholesterol in human serum successfully. Especially, it can be applied to the rough quantification of membrane cholesterol in living tumor cells, indicating that it has the potential for clinical application.

Bioinspired Framework Catalysts: From Enzyme Immobilization to Biomimetic Catalysis

Enzymatic catalysis has fueled considerable interest from chemists due to its high efficiency and selectivity. However, the structural complexity and vulnerability hamper the application potentials of enzymes. Driven by the practical demand for chemical conversion, there is a long-sought quest for bioinspired catalysts reproducing and even surpassing the functions of natural enzymes. As nanoporous materials with high surface areas and crystallinity, metal-organic frameworks (MOFs) represent an exquisite case of how natural enzymes and their active sites are integrated into porous solids, affording bioinspired heterogeneous catalysts with superior stability and customizable structures. In this review, we comprehensively summarize the advances of bioinspired MOFs for catalysis, discuss the design principle of various MOF-based catalysts, such as MOF-enzyme composites and MOFs embedded with active sites, and explore the utility of these catalysts in different reactions. The advantages of MOFs as enzyme mimetics are also highlighted, including confinement, templating effects, and functionality, in comparison with homogeneous supramolecular catalysts. A perspective is provided to discuss potential solutions addressing current challenges in MOF catalysis.

Gas-phase organometallic catalysis in MFM-300(Sc) provided by switchable dynamic metal sites

MFM-300(Sc) was explored as a catalyst for the gas-phase hydrogenation of acetone. The catalysis results support the presence of non-permanent open Sc(III) sites within the structure due to the requirement of Lewis acid sites for the reaction to proceed. The open Sc(III) sites are generated in situ due to the presence of hemilabile Sc-O bonds. MFM-300(Sc) showed high mechanical and chemical stability, and the crystalline structure was maintained after the catalytic reaction. The catalytic activity of the material was quantified by performing a gas-phase reaction using a continuous flow reactor. The acetone conversion in MFM-300(Sc) was estimated to be 27.7% with no loss of activity after catalytic cycles.

Efficient discovery of potent α-glucosidase inhibitors from Paeoniae lactiflora using enzyme-MOF nanocomposites and competitive indicators

A great deal of attention has been paid to the seeds of Paeoniae lactiflora pall., an underutilized food resource, since its extract exhibits excellent α-glucosidase (GAA) inhibitory activity. In the present study, to gain further insight into this plant and find out potent GAA inhibitors, we established a novel ligand fishing strategy by introducing a competitive inhibitor as an indicator. After the successful establishment of this approach was verified by a series of methods, including kinetic assay, fluorescence determination, and HPLC, the newly developed ligand fishing method was applied to acquire potent GAA inhibitors from P. lactiflora seeds. Nine bioactive compounds were captured, and seven of them were identified as suffruticosol A, suffruticosol B, resveratrol, vitisin E, luteolin, trans-δ-viniferin, and ampelopsin E. The data of their GAA inhibitory activity demonstrated that these constituents were vigorously active against GAA with IC₅₀ values of 1.67-30.47 μM, while such value of 1-DNJ was 228.77 μM. Among them, vitisin E and ampelopsin E were reported to show such inhibitory activity for the first time. Collectively, our findings provide valuable clues for the further utilization of P. lactiflora seeds as a functional food, and offer a new avenue for acquiring potent inhibitors from natural resources.

Fluorine extraction from organofluorine molecules to make fluorinated clusters in yttrium MOFs

A new rare earth based two-dimensional coordination network and a three-dimensional metal-organic framework (MOF) have been synthesized using bicinchoninic acid (BCA) and yttrium(iii) ions. Yttrium dimer nodes are formed in the absence of a modulator, resulting in a 2D layered coordination network (Y-BCA-2D). The presence of fluorinating agents, e.g., 2-fluorobenzoic acid (2-FBA), 2,6-difluorobenzoic acid (2,6-DFBA), and perfluorohexanoic acid (PFHxA) result in μ₃-F bridged metal hexaclusters (Y₆F₈) that form a three-dimensional MOF (Y-BCA-3D). It was found that Y³⁺ can break highly stable C-F bonds in aromatic and aliphatic fluorinated compounds. Single-crystal X-ray diffraction (SC-XRD) shows the presence of fluorine in the metal cluster which was confirmed by energy dispersive X-ray spectroscopy (EDS). High resolution X-ray photoelectron spectroscopy (XPS) and ¹⁹F Nuclear Magnetic Resonance (NMR) also verify the presence of metal-fluorine bonds in the cluster. The Y-BCA-3D MOF selectively adsorbs CO₂ but not N₂.

Solid-state synthesis of a MOF/polymer composite for hydrodeoxygenation of vanillin

A new solid-state method was used to introduce a furan-thiourea polymer into the pores of a MOF, Cr-BDC. Next, the activity of the new MOF-polymer composite containing Pd was assessed in the catalytic hydrodeoxygenation of vanillin, a biomass derived chemical.

Cu(II)-Based Coordination Polymer as a Pristine Form Usable Electrocatalyst for Oxygen Reduction Reaction: Experimental Evaluation and Theoretical Insights into Biomimetic Mechanistic Aspects

As the postsynthesis-processed metal-organic material-based catalysts for energy applications add additional cost to the whole process, the importance of developing synthesized usable pristine catalysts is quite evident. The present work reports a new Cu-based coordination polymer (Cu-CP) catalyst to be used in its pristine form for oxygen reduction reaction (ORR) application. The catalyst was characterized using single-crystal X-ray diffraction, field emission scanning electron microscopy, and X-ray photoemission spectroscopy. The Cu-CP exhibits admirable electrocatalytic ORR activity with an onset potential of 0.84 V versus RHE and a half wave potential of 0.69 V versus RHE. As revealed by the density functional theory-based computational mechanistic investigation of the electrocatalytic ORR process, the electrochemically reduced Cu(I) center binds to the molecular O₂ through an exergonic process (ΔG = -6.8 kcal/mol) and generates the Cu(II)-O₂^•- superoxo intermediate. Such superoxo intermediates are frequently encountered in the catalytic cycle of the Cu-containing metalloenzymes in their O₂ reduction reaction. This intermediate undergoes coupled proton and electron transfer processes to give OH^- in an alkaline medium involving H₂O₂ as the intermediate. The electrocatalytic performance of Cu-CP remained stable even up to 3000 cycles. Overall, the newly developed Cu-CP-based electrocatalyst holds promising potential for efficient biomimetic ORR reactivity, which opens new possibilities toward the development of robust coordination polymer-based electrocatalysts.

2D/3D-Shaped Fe0.8Ni0.2S2/ZIF-67 as a Nanozyme for Rapid Measurement of H2O2 and Ascorbic Acid with a Low Limit of Detection

Metal-organic frameworks (MOFs) can be used as ideal artificial nanozymes for an open structure to transfer substances and products. The nanozymic mechanism of MOFs needs further investigation for wide application. In this manuscript, no peroxidase-like activity was found for ZIF-67 (a kind of MOF), however, it enhanced the peroxidase-like activity of the Fe_0.8Ni_0.2S₂/ZIF-67 composite, in which Fe_0.8Ni_0.2S₂ was the active composition. The catalytic constant (K_cat) is higher at 1.98 (for TMB) and 2.08 (for H₂O₂) times and the catalytic efficiency (K_cat/K_m) is higher at 3.13 (for TMB) and 2.67 (for H₂O₂) times, than those of Fe_0.8Ni_0.2S₂. The K_m value decreased about 85 times (for H₂O₂) for Fe_0.8Ni_0.2S₂/ZIF-67 than that of horseradish peroxidase (natural enzyme). The mechanism was proposed. The limit of detection of H₂O₂ for Fe_0.8Ni_0.2S₂/ZIF-67 is 0.039 μM, which is lower by about 18.2 times than that of Fe_0.8Ni_0.2S₂. Simultaneously, Fe_0.8Ni_0.2S₂/ZIF-67 was used to rapidly detect ascorbic acid for only 1.0 min in food monitoring. This study may be important to design a new kind of nanozyme.

Biomimetic Nanomaterials: Diversity, Technology, and Biomedical Applications

Biomimetic nanomaterials (BNMs) are functional materials containing nanoscale components and having structural and technological similarities to natural (biogenic) prototypes. Despite the fact that biomimetic approaches in materials technology have been used since the second half of the 20th century, BNMs are still at the forefront of materials science. This review considered a general classification of such nanomaterials according to the characteristic features of natural analogues that are reproduced in the preparation of BNMs, including biomimetic structure, biomimetic synthesis, and the inclusion of biogenic components. BNMs containing magnetic, metal, or metal oxide organic and ceramic structural elements (including their various combinations) were considered separately. The BNMs under consideration were analyzed according to the declared areas of application, which included tooth and bone reconstruction, magnetic and infrared hyperthermia, chemo- and immunotherapy, the development of new drugs for targeted therapy, antibacterial and anti-inflammatory therapy, and bioimaging. In conclusion, the authors’ point of view is given about the prospects for the development of this scientific area associated with the use of native, genetically modified, or completely artificial phospholipid membranes, which allow combining the physicochemical and biological properties of biogenic prototypes with high biocompatibility, economic availability, and scalability of fully synthetic nanomaterials.

Metal–Organic Frameworks for Electrocatalytic Sensing of Hydrogen Peroxide

The electrochemical detection of hydrogen peroxide (H₂O₂) has become more and more important in industrial production, daily life, biological process, green energy chemistry, and other fields (especially for the detection of low concentration of H₂O_2). Metal organic frameworks (MOFs) are promising candidates to replace the established H₂O₂ sensors based on precious metals or enzymes. This review summarizes recent advances in MOF-based H₂O₂ electrochemical sensors, including conductive MOFs, MOFs with chemical modifications, MOFs-composites, and MOF derivatives. Finally, the challenges and prospects for the optimization and design of H₂O₂ electrochemical sensors with ultra-low detection limit and long-life are presented.

Photosensitized Peroxidase Mimicry at the Hierarchical 0D/2D Heterojunction-Like Quasi Metal-Organic Framework Interface for Boosting Biocatalytic Disinfection

Metal-organic frameworks (MOFs) are a versatile toolbox for the bioinspired design of nanozymes for antibacterial applications and beyond, however, designing a nanozyme by the hierarchical quasi-MOF scheme remains largely unpracticed. This work exemplifies the preferential structure-activity correlation of a bimetallic quasi-MOF (Q-MOF_Ce0.5 ) among three series of MOF-derived peroxidase (POD) mimics. The biomimetic quasi-MOF_Ce0.5 nanosheets accommodate both oxygen vacancy-coupled multivalent redox cycles and photosensitive energy band layout, benefiting from the hierarchical heterojunction-like 0D/2D interface featuring isolated nodes-derived CeOCu sites upon the 2D decarboxylated MOF scaffold. These integrated unique merits enable the POD-like Q-MOF_Ce0.5 to generate sustained reactive oxygen species to effectively eradicate the surface-adhered bacteria under visible light, resulting in significant inactivation of Escherichia coli (99.74 %) and Staphylococcus aureus (99.35%) in vitro, and potent disinfection of skin wounds in vivo in safe and on-demand manners. It is hoped that this work can intensify the interventions of MOF nanozymes against the microbial world.

La/LaF3 co-modified MIL-53(Cr) as an efficient adsorbent for the removal of tetracycline

Chromium based metal-organic framework (MIL-53(Cr)) has enormous potential in the removal of organic contaminants from aqueous solutions due to its outstanding water stability, whereas its poor adsorption capacity limits the application. In this study, La/LaF₃-MIL-53(Cr) was successfully synthesized by taking the advantages of La doping and LaF₃ encapsulation with one-step hydrothermal method. Diverse analysis tools were utilized to verify that La not only existed in the framework, but also was loaded in the pores in the form of LaF₃. The adsorption experiment results demonstrated that 0.3-La/LaF₃-MIL-53(Cr) exhibited significantly improved adsorption capacity by four times compared with the pristine MIL-53(Cr) material. XPS and FTIR revealed that the affinity of La to tetracycline was significantly stronger than that of Cr and the excellent dispersion of LaF₃ in the material may also be the cause of the increase in adsorption capacity. This study described a simple method to combine two different forms of modification and the modified material was potential for tetracycline adsorption.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Multiple electron transfer pathways of tungsten-containing formate dehydrogenase in direct electron transfer-type bioelectrocatalysis

Tungsten-containing formate dehydrogenase from Methylorubrum extroquens AM1 (FoDH1)—a promising biocatalyst for the interconversion of carbon dioxide/formate and nicotine adenine dinucleotide (NAD+)/NADH redox couples—was investigated from structural biology and bioelectrochemistry. FoDH1...

Hybridization of Synthetic Humins with a Metal-Organic Framework for Precious Metal Recovery and Reuse

The number of synthetic strategies used to functionalize MOFs with polymers is rapidly growing; this stems from the knowledge that non-native polymeric guests can significantly boost MOF performance in a number of desirable applications. The current work presents a scalable and solid-state method for MOF/polymer composite production. This simple method constitutes mixing a MOF powder, namely, Fe-BTC (BTC = 1,3,5-benzenetricarboxylate), with a biomass-derived solid monomer, 5-hydroxymethylfurfural (HMF), and subsequently heating the solids; the latter promotes both solid-state diffusion of HMF into the MOF and the formation of polymeric humin species with a high density of accessible hydroxyl functionality within the MOF pore. The resulting composite, Fe-BTC/humin, was found to selectively extract Ag⁺ ions from laundry wastewater. Subsequent reduction of the Ag⁺ species yields a novel catalyst, Fe-BTC/humin/Ag, that is able to drive the organic transformation of cinnamaldehyde in a highly selective manner. Moreover, the catalyst exhibited recyclability up to five cycles, which is in contrast to the Fe-BTC/Ag catalyst without the humin-based polymer. It is envisioned that MOF/polymer composites that are able to selectively extract precious metals from liquid waste streams can be used for the future production of sustainable catalysts; this work was aimed at demonstrating a proof of concept in this regard. Moreover, this study brings more understanding of the impact that MOFs can have on polymer functionalities. Understanding the polymer structure and how it can be manipulated will help us realize the high degree of future potential of this distinct class of composite materials.

Fe doped MoS2/polypyrrole microtubes towards efficient peroxidase mimicking and colorimetric sensing application

Molybdenum disulfide (MoS₂) nanosheets have been found to exhibit intrinsic peroxidase-like activity that could be applied in colorimetric sensing platforms. However, their poor conductivity and few exposed edge sites often lead to poor catalytic activity, impeding the application of MoS₂ nanosheets in enzyme-like catalysis. Here, a novel strategy was developed to selectively deposit Fe-doped MoS₂ nanosheets on polypyrrole microtubes to obtain Fe-MoS₂@PPy microtubes to address these issues. In the synthesized Fe-MoS₂@PPy microtubes, PPy microtubes can not only be used as a conductive support to promote the electron transfer, but also greatly alleviate the aggregations of MoS₂ nanosheets, and thus improve the enzyme-like activity. Meanwhile, additional active sites, formed by Fe doping, also endow the catalyst with excellent activity in enzyme-like catalysis. Notably, in the process of sulfidation, the dissolution, redistribution and diffusion result in the disappearance of MoO₃@FeOOH cores and the formation of Fe doped MoS₂ nanosheets, which significantly facilitate the deposition of Fe-doped MoS₂ nanosheets on PPy microtubes. On the basis of the high peroxidase-like catalytic efficiency of the Fe-MoS₂@PPy microtubes, a simple and convenient colorimetric strategy for the rapid and sensitive detection of L-cysteine has been developed. This strategy introduces both the PPy layer and Fe doping to increase the conductivity and the density of active sites of MoS₂ nanosheets, thus enhancing the catalytic activity and stability. More importantly, Fe-MoS₂@PPy microtubes could be used as a good support for loading other materials such as Au and Ag nanoparticles (NPs), forming ternary Fe-MoS₂/Ag, Au@PPy nanotubes. This work offers an opportunity to develop low-cost and highly active MoS₂-based nanocomposites for promising potential applications in electrochemical energy conversion and medical diagnostics.

2D/3D Copper-Based Metal-Organic Frameworks for Electrochemical Detection of Hydrogen Peroxide

Metal-organic frameworks (MOFs) have been extensively used as modified materials of electrochemical sensors in the food industry and agricultural system. In this work, two kinds of copper-based MOFs (Cu-MOFs) with a two dimensional (2D) sheet-like structure and three dimensional (3D) octahedral structure for H2O2 detection were synthesized and compared. The synthesized 2D and 3D Cu-MOFs were modified on the glassy carbon electrode to fabricate electrochemical sensors, respectively. The sensor with 3D Cu-MOF modification (HKUST-1/GCE) presented better electrocatalytic performance than the 2D Cu-MOF modified sensor in H2O2 reduction. Under optimal conditions, the prepared sensor displayed two wide linear ranges of 2 μM-3 mM and 3-25 mM and a low detection limit of 0.68 μM. In addition, the 3D Cu-MOF sensor exhibited good selectivity and stability. Furthermore, the prepared HKUST-1/GCE was used for the detection of H2O2 in milk samples with a high recovery rate, indicating great potential and applicability for the detection of substances in food samples. This work provides a convenient, practical, and low-cost route for analysis and extends the application range of MOFs in the food industry, agricultural and environmental systems, and even in the medical field.

Ronald C.D. Breslow (1931-2017): A career in review

Reviewed herein are key research accomplishments of Professor Ronald Charles D. Breslow (1931-2017) throughout his more than 60 year research career. These accomplishments span a wide range of topics, most notably physical organic chemistry, medicinal chemistry, and bioorganic chemistry. These topics are reviewed, as are topics of molecular electronics and origin of chirality, which combine to make up the bulk of this review. Also reviewed briefly are Breslow's contributions to the broader chemistry profession, including his work for the American Chemical Society and his work promoting gender equity. Throughout the article, efforts are made to put Breslow's accomplishments in the context of other work being done at the time, as well as to include subsequent iterations and elaborations of the research.

Porphyrins and Polyoxometalate Scaffolds

Polyoxometalates (POMs) can act as unique reservoirs for multiple electron transfers. As POMs display only weak absorption in the visible spectrum, they can be associated with chromophores such as porphyrins and porphyrin antennae. In this Minireview, the research dedicated to the combination of porphyrins and polyoxometalates is put in context and the state of the art identifying the challenges addressed in the optimization of hybrid materials for applications is detailed.

Self-Assembling Peptidic Bolaamphiphiles for Biomimetic Applications

Bolaamphiphile, which is a class of amphiphilic molecules, has a unique structure of two hydrophilic head groups at the ends of the hydrophobic center. Peptidic bolaamphiphiles that employ peptides or amino acids as their hydrophilic groups exhibit unique biochemical activities when they self-organize into supramolecular structures, which are not observed in a single molecule. The self-assembled peptidic bolaamphiphiles hold considerable promise for imitating proteins with biochemical activities, such as specific affinity toward heterogeneous substances, a catalytic activity similar to a metalloenzyme, physicochemical activity from harmonized amino acid segments, and the capability to encapsulate genes like a viral vector. These diverse activities give rise to large research interest in biomaterials engineering, along with the synthesis and characterization of the assembled structures. This review aims to address the recent progress in the applications of peptidic bolaamphiphile assemblies whose densely packed peptide motifs on their surface and their stacked hydrophobic centers exhibit unique protein-like activity and designer functionality, respectively.

A 3D MOF based on Adamantoid Tetracopper(II) and Aminophosphine Oxide Cages: Structural Features and Magnetic and Catalytic Properties

This work describes an unexpected generation of a new 3D metal-organic framework (MOF), [Cu₄(μ-Cl)₆(μ₄-O)Cu(OH)₂(μ-PTA═O)₄]_n·2nCl-EtOH·2.5nH₂O, from copper(II) chloride and 1,3,5-triaza-7-phosphaadamantane 7-oxide (PTA═O). The obtained product is composed of diamandoid tetracopper(II) [Cu₄(μ-Cl)₆(μ₄-O)] cages and monocopper(II) [Cu(OH)₂] units that are assembled, via the diamandoid μ-PTA═O linkers, into an intricate 3D net with an nbo topology. Magnetic susceptibility measurements on this MOF in the temperature range of 1.8-300 K reveal a ferromagnetic interaction (J = +20 cm^-1) between the neighboring copper(II) ions. Single-point DFT calculations disclose a strong delocalization of the spin density over the tetranuclear unit. The magnitude of exchange coupling, predicted from the broken-symmetry DFT studies, is in good agreement with the experimental data. This copper(II) compound also acts as an active catalyst for the mild oxidation and carboxylation of alkanes. The present study provides a unique example of an MOF that is assembled from two different types of adamantoid Cu₄ and PTA═O cages, thus contributing to widening a diversity of functional metal-organic frameworks.

Iodide/metal-organic frameworks (MOF) -mediated signal amplification strategy for the colorimetric detection of H2O2, Cr2O72- and H2S

The analytical methods based on colorimetric detection of various analytes have attracted intensive interest. However, most of them display relatively low sensitivity. Herein, a novel colorimetric strategy based on iodide/metal-organic frameworks (MOF)-mediated amplification was developed for low-cost, naked-eye detection and quantification of H₂O₂,Cr₂O₇^2-, and H₂S. Cu-MOFs could catalyze the oxidation of the colorless peroxidase substrate TMB to produce a blue product. The published researches mainly focused on the immobilization or integration of a macromolecule, such as natural enzymes, to enhance MOFs catalytic abilities. The use of small molecules to improve the catalytic performance of MOFs has rarely reported. Due to the negligible steric hindrance, iodide could easily be adsorbed in the framework pore of MOFs to conduct the synergic catalytic effect, and shows a high catalytic effect. As a result, the catalytic activity of Cu-MOFs was dramatically enhanced, and thus, the nanocatalyst could act as an amplifier system for target detection. The detection limits obtained by the amplified method are 25, 30, and 0.2 nM, respectively, which are about 200-fold lower than that of the unamplified colorimetric assays. The colorimetric strategy developed herein provides a novel system for the detection of low concentrations of analytes in complex biological samples.

Biomimetic catalysts of iron-based metal-organic frameworks with high peroxidase-mimicking activity for colorimetric biosensing

The field of metal-organic framework (MOF)-based biomimetic catalysts has achieved great progress but is still in its infancy. The systematic investigation of the tailored construction of MOF-based biomimetic catalysts is required for further development. Herein, two iron-based MOFs, namely, [(Fe₃O)₂(H₂O)₄(HCOO)(L)₂]_n (HUST-5: H₆L = hexakis(4-formylphenoxy) cyclotriphosphazene; HUST = Huazhong University of Science and Technology) and [(Fe₃O)(H₂O)₃(L)]_n (HUST-7) have been fabricated through the assembly of different iron clusters and hexa-carboxylate ligand under the control of the added acid species. The two MOFs exhibit distinct secondary building units (SBUs) and topological structures, which could be used as biomimetic catalysts for the systematic comparisons of structural characteristics and the catalytic activity. Both MOFs possess catalytic activity similar to that of natural peroxidases towards the catalysis of the oxidation of a variety of substrates. Significantly, HUST-5 and HUST-7 can effectively catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H₂O₂ accompanied by significant colorimetric biosensing. With same compositions, different catalytic performances were obtained due to differences in the porous structures and characteristics of SBUs in two Fe-MOFs, which was also validated by theoretical calculation results. Furthermore, the phenomenon of colorimetric biosensing could be significantly suppressed by the addition of ascorbic acid (AA) during the oxidation process of TMB. It was observed from these findings that a facile colorimetric biosensing platform for detecting H₂O₂ and ascorbic acid has been successfully explored. Therefore, this work provides another unique perspective for the tailor-made preparation of stable MOF-based peroxidase mimics with excellent catalytic performance and colorimetric biosensing.

Sn-based metal-organic framework for highly selective capture of monophosphopeptides

Sn-based metal-organic framework (MOF) was utilized to effectively capture monophosphopeptides due to the unique affinity. The Sn-based MOF demonstrated the good sensitivity and selectivity in the model phosphoproteins enrichment and was successfully applied in the biological fluids.

Metal-Organic Frameworks in Oxidation Catalysis with Hydrogen Peroxide

In recent years, metal–organic frameworks (MOFs) have received increasing attention as selective oxidation catalysts and supports for their construction. In this short review paper, we survey recent findings concerning use of MOFs in heterogeneous liquid-phase selective oxidation catalysis with the green oxidant–aqueous hydrogen peroxide. MOFs having outstanding thermal and chemical stability, such as Cr(III)-based MIL-101, Ti(IV)-based MIL-125, Zr(IV)-based UiO-66(67), Zn(II)-based ZIF-8, and some others, will be in the main focus of this work. The effects of the metal nature and MOF structure on catalytic activity and oxidation selectivity are analyzed and the mechanisms of hydrogen peroxide activation are discussed. In some cases, we also make an attempt to analyze relationships between liquid-phase adsorption properties of MOFs and peculiarities of their catalytic performance. Attempts of using MOFs as supports for construction of single-site catalysts through their modification with heterometals will be also addressed in relation to the use of such catalysts for activation of H2O2. Special attention is given to the critical issues of catalyst stability and reusability. The scope and limitations of MOF catalysts in H2O2-based selective oxidation are discussed.

Cobalt-Based Metal Organic Frameworks as Solids Catalysts for Oxidation Reactions

Metal organic frameworks (MOFs) are porous crystalline solids whose frameworks are constituted by metal ions/nodes with rigid organic linkers leading to the formation of materials having high surface area and pore volume. One of the unique features of MOFs is the presence of coordinatively unsaturated metal sites in their crystalline lattice that can act as Lewis acid sites promoting organic transformations, including aerobic oxidation reactions of various substrates such as hydrocarbons, alcohols, and sulfides. This review article summarizes the existing Co-based MOFs for oxidation reactions organized according to the nature of substrates like hydrocarbon, alcohol, olefin, and water. Both aerobic conditions and peroxide oxidants are discussed. Emphasis is placed on comparing the advantages of using MOFs as solid catalysts with respect to homogeneous salts in terms of product selectivity and long-term stability. The final section provides our view on future developments in this field.

Recent Advances in the Design and Sensing Applications of Hemin/Coordination Polymer-Based Nanocomposites

The fabrication of biomimetic catalysts as substituents for enzymes is of critical interest in the field due to the problems associated with the extraction, purification, and storage of enzymes in sensing applications. Of these mimetics, hemin/coordination polymer-based nanocomposites, mainly hemin/metal-organic frameworks (MOF), have been developed for various biosensing applications because of the unique properties of each component, while trying to mimic the normal biological functions of heme within the protein milieu of enzymes. This critical review first discusses the different catalytic functions of heme in the body in the form of enzyme/protein structures. The properties of hemin dimerization are then elucidated with the supposed models of hemin oxidation. After that, the progress in the fabrication of hemin/MOF nanocomposites for the sensing of diverse biological molecules is discussed. Finally, the challenges in developing this type of composites are examined as well as possible proposals for future directions to enhance the sensing performance in this field further.

Directing group strategies in catalytic sp2 C–H cyanations: scope, mechanism and limitations

Directing group strategy in transition metal catalyzed sp² C–H bond cyanation has contributed to the direct conversion of hydrocarbons to cyano-containing compounds. Recent developments in transition metal-mediated sp² C–H bond cyanation using this strategy are reviewed.

Copper-catalyzed arylation of polycyclic aromatic hydrocarbons by the P[double bond, length as m-dash]O group

The first example of a directed and regioselective arylation of polycyclic aromatic hydrocarbons (PAHs) by using a P[double bond, length as m-dash]O directing group is reported herein. The protocol uses a cheap copper catalyst, and results in a breakthrough meta-selective C-H functionalization of arylphosphine oxide compounds. Substrates with potential fluorescence properties, for example, pyrene and fluoranthene, were successfully arylated under the system, thus achieving an efficient modification of fluorescent molecules containing the P[double bond, length as m-dash]O functional group.

Biomimetic Au/CeO2 Catalysts Decorated with Hemin or Ferrous Phthalocyanine for Improved CO Oxidation via Local Synergistic Effects

Biomimetic catalysts have drawn broad research interest owing to both high specificity and excellent catalytic activity. Herein, we report a series of biomimetic catalysts by the integration of biomolecules (hemin or ferrous phthalocyanine) onto well-defined Au/CeO₂, which leads to the high-performance CO oxidation catalysts. Strong electronic interactions among the biomolecule, Au, and CeO₂ were confirmed, and the CO uptake over hemin-Au/CeO₂ was roughly about 8 times greater than Au/CeO₂. Based on the Au/CeO₂(111) and hemin-Au/CeO₂(111) models, the density functional theory calculations reveal the mechanisms of the biomolecules-assisted catalysis process. The theoretical prediction suggests that CO and O₂ molecules preferentially bind to the surface of noncontacting Au atoms (low-coordinated sites) rather than the biomolecule sites, and the accelerating oxidation of Au-bound CO occurs via either the Langmuir-Hinshelwood mechanism or the Mars-van Krevelen mechanism. Accordingly, the findings provide useful insights into developing biomimetic catalysts with low cost and high activity.

Gallate-Based Metal–Organic Frameworks, a New Family of Hybrid Materials and Their Applications: A Review

Within three decades of fundamental findings in research on metal–organic frameworks (MOFs), a new family of hybrid materials known as gallate-based MOFs, consisting of metal salt and gallic acid, have been of great interest. Due to the fact that gallic acid is acknowledged to display a range of bioactivities, gallate-based MOFs have been initially expended in biomedical applications. Recently, gallate-based MOFs have been gradually acting as new alternative materials in chemical industrial applications, in which they were first reported for the adsorptive separation of light hydrocarbon separations. However, to date, none of them have been related to CO2/CH4 separation. These porous materials have a bright future and can be kept in development for variety of applications in order to be applied in real industrial practices. Therefore, this circumstance creates a new opportunity to concentrate more on studies in CO2/CH4 applications by using porous material gallate-based MOFs. This review includes the description of recent gallate-based MOFs that presented remarkable properties in biomedical areas and gas adsorption and separation, as well as their future potential application.

Spectroscopic Evidence of Energy Transfer in BODIPY-Incorporated Nano-Porphyrinic Metal-Organic Frameworks

Metal–organic frameworks (MOFs) represent a class of solid-state hybrid compounds consisting of multitopic organic struts and metal-based nodes that are interconnected by coordination bonds, and they are ideal for light harvesting due to their highly ordered structure. These structures can be constructed with chromophore organic ligands structures for the purpose of efficient light harvesting. Here, we prepared porphyrin-based nano-scaled MOFs (nPCN-222) with BODIPY and I₂BODIPY photosensitizers by incorporating BODIPY/I₂BODIPY into nPCN-222 (nPCN-BDP/nPCN-I₂BDP) and demonstrated resonance energy transfer from the donor (BODIPY/I₂BODIPY) to the acceptor (nPCN-222) resulting in greatly enhanced fluorescence of nPCN-222, as visually manifested by time-resolved and space-resolved fluorescence imaging of the nano-scaled MOFs.