PtNi Alloy Coated in Porous Nitrogen-Doped Carbon as Highly Efficient Catalysts for Hydrogen Evolution Reactions

The development of low platinum loading hydrogen evolution reaction (HER) catalysts with high activity and stability is of great significance to the practical application of hydrogen energy. This paper reports a simple method to synthesize a highly efficient HER catalyst through coating a highly dispersed PtNi alloy on porous nitrogen-doped carbon (MNC) derived from the zeolite imidazolate skeleton. The catalyst is characterized and analyzed by physical characterization methods, such as XRD, SEM, TEM, BET, XPS, and LSV, EIS, it, v-t, etc. The optimized sample exhibits an overpotential of only 26 mV at a current density of 10 mA cm⁻², outperforming commercial 20 wt% Pt/C (33 mV). The synthesized catalyst shows a relatively fast HER kinetics as evidenced by the small Tafel slope of 21.5 mV dec⁻¹ due to the small charge transfer resistance, the alloying effect between Pt and Ni, and the interaction between PtNi alloy and carrier.

Bimetallic Nanomaterials-Based Electrochemical Biosensor Platforms for Clinical Applications

Diabetes is a foremost health issue that results in ~4 million deaths every year and ~170 million people suffering globally. Though there is no treatment for diabetes yet, the blood glucose level of diabetic patients should be checked closely to avoid further problems. Screening glucose in blood has become a vital requirement, and thus the fabrication of advanced and sensitive blood sugar detection methodologies for clinical analysis and individual care. Bimetallic nanoparticles (BMNPs) are nanosized structures that are of rising interest in many clinical applications. Although their fabrication shares characteristics with physicochemical methodologies for the synthesis of corresponding mono-metallic counterparts, they can display several interesting new properties and applications as a significance of the synergetic effect between their two components. These applications can be as diverse as clinical diagnostics, anti-bacterial/anti-cancer treatments or biological imaging analyses, and drug delivery. However, the exploitation of BMNPs in such fields has received a small amount of attention predominantly due to the vital lack of understanding and concerns mainly on the usage of other nanostructured materials, such as stability and bio-degradability over extended-time, ability to form clusters, chemical reactivity, and biocompatibility. In this review article, a close look at bimetallic nanomaterial based glucose biosensing approaches is discussed, concentrating on their clinical applications as detection of glucose in various real sample sources, showing substantial development of their features related to corresponding monometallic counterparts and other existing used nanomaterials for clinical applications.

Dictating catalytic performance of platinum-iron nanoparticle by regulating its heterogeneous interface and stability

Innovative design of nanocatalyst with high activity remains to be great challenge. Platinum (Pt) nanoparticle has already demonstrated to be excellent candidates in the field of catalysis. However, the scarcity and high price significantly hinder its large-scale production. In this work, dumbbell-like alloying nanoparticle of platinum-iron/ferroferric oxide (PtFeFe₃O₄) was prepared. On one hand, the design of the alloying nanoparticle can manipulate the d-band center of Pt, in further, the interaction with substrates. In addition, the dumbbell-like structured PtFeFe₃O₄ can offer heterogeneous interface, of which the interaction between PtFe and Fe₃O₄, supported by the X-ray photoelectron spectroscopic (XPS) results, leads to the enhanced catalytic efficiency. On the other hand, the introduction of Fe (iron) composition largely decreases the necessary amount of Pt, leading to efficient cost reduction. Moreover, to avoid the aggregation related activity attenuation problem, PtFeFe₃O₄ nanoparticle located in cavity of nitrogen heteroatom-doped carbon shell (PtFeFe₃O₄@NC) as yolk@shell nanostructure was constructed and its improved catalytic performance was demonstrated towards the reactions of 4-nitrophenol (4-NP) reduction, β-ionone and benzhydrol oxidation.

Electrolysis on a Chip with Tunable Thin Film Nanostructured PGM Electrocatalysts Generated from Self-Assembled Block Copolymer Templates

Self-assembled block copolymers are promising templates for fabricating thin film materials with tuned periodic feature sizes and geometry at the nanoscale. Here, a series of nanostructured platinum and iridium oxide electrocatalysts templated from poly(styrene)-block-poly(vinyl pyridine) (PSbPVP) block copolymers via an incipient wetness impregnation (IWI) pathway is reported. Both nanowire and nanocylinder electrocatalysts of varying feature sizes are assessed and higher catalyst loadings are achieved by the alkylation of the pyridine moieties in the PVP block prior to IWI. Electrocatalyst evaluations featuring hydrogen pump and water electrolysis demonstrations are carried out on interdigitated electrode (IDE) chips flexible with liquid supporting electrolytes and thin film polymer electrolytes. Notably, the mass activities of the nanostructured electrocatalysts from alkylated block copolymer templates are 35%-94% higher than electrocatalysts from non-alkylated block copolymer templates. Standing cylinder nanostructures lead to higher mass activities than lamellar variants despite their not having the largest surface area per unit catalyst loading demonstrating that mesostructure architectures have a profound impact on reactivity. Overall, IDE chips with model thin film electrocatalysts prepared from self-assembled block copolymers offer a high-throughput experimental method for correlating electrocatalyst nanostructure and composition to electrochemical reactivity.

Platinum-Based Electrocatalysts for Direct Alcohol Fuel Cells: Enhanced Performances toward Alcohol Oxidation Reactions

In the past few decades, Pt-based electrocatalysts have attracted great interests due to their high catalytic performances toward the direct alcohol fuel cell (DAFC). However, the high cost, poor stability, and the scarcity of Pt have markedly hindered their large-scale utilization in commerce. Therefore, enhancing the activity and durability of Pt-based electrocatalysts, reducing the Pt amount and thus the cost of DAFC have become the keys for their practical applications. In this minireview, we summarized some basic concepts to evaluate the catalytic performances in electrocatalytic alcohol oxidation reaction (AOR) including electrochemical active surface area, activity and stability, the effective approaches for boosting the catalytic AOR performance involving size decrease, structure and morphology modulation, composition effect, catalyst supports, and assistance under other external energies. Furthermore, we also presented the remaining challenges of the Pt-based electrocatalysts to achieve the fabrication of a real DAFC.

PtCo-excavated rhombic dodecahedral nanocrystals for efficient electrocatalysis

Platinum (Pt)-based catalysts have shown excellent catalytic performance in many fields, particularly for the oxygen reduction reaction (ORR) and direct oxidation of small fuel molecules. Further development of Pt-based electrocatalysts relies on the morphology design of Pt-based alloy nanocrystals (NCs) with highly accessible and active surface sites to optimize Pt atomic utilization. In this work, we reported PtCo-excavated rhombic dodecahedral (ERD) NCs consisting of the self-assembly of 24 ultrathin nanosheets synthesized by a simple wet chemical method. The morphology can be regulated from convex to excavated polyhedra by controlling the amount of formaldehyde and the molar ratio of the Co/Pt precursor. The as-prepared PtCo ERD NCs/C catalyst exhibits excellent ORR performance, which has about 12 times higher specific activity and 6 times higher mass activity than the commercial Pt/C catalyst. It also displays good electrocatalytic ability towards methanol oxidation, in which the specific activity and mass activity are about 6 times higher and 2 times higher than the commercial Pt/C, respectively. Their enhanced activity is attributed to the excavated structure and alloy feature.

Bimetallic PtAu electrocatalysts for the oxygen reduction reaction: challenges and opportunities

Highly active, durable oxygen reduction reaction (ORR) electrocatalysts have an essential role in promoting the continuous operation of advanced energy technologies such as fuel cells and metal-air batteries. Considering the scarce reserve of Pt and its unsatisfactory overall performance, there is an urgent demand for the development of new generation ORR electrocatalysts that are substantially better than the state-of-the-art supported Pt-based nanocatalysts, such as Pt/C. Among various nanostructures, bimetallic PtAu represents one unique alloy system where highly contradictory performance has been reported. While it is generally accepted that Au may contribute to stabilizing Pt, its role in modulating the intrinsic activity of Pt remains unclear. This perspective will discuss critical structural issues that affect the intrinsic ORR activities of bimetallic PtAu, with an eye on elucidating the origin of seemingly inconsistent experimental results from the literature. As a relatively new class of electrodes, we will also highlight the performance of dealloyed nanoporous gold (NPG) based electrocatalysts, which allow a unique combination of structural properties highly desired for this important reaction. Finally, we will put forward the challenges and opportunities for the incorporation of these advanced electrocatalysts into membrane electrode assemblies (MEA) for actual fuel cells.

Advanced Ultrathin RuPdM (M = Ni, Co, Fe) Nanosheets Electrocatalyst Boosts Hydrogen Evolution

The hydrogen evolution reaction (HER) is one of the most significant reactions in the electrolysis water process, and electrocatalysts which possess high mass activity and excellent stability are the most important driving factors to improve the efficiency of HER. As for the efficient commercially electrocatalyst, Pt/C is limited in development because of its high cost. Therefore, the study of non-Pt high-efficiency catalysts is particularly important at this moment. Here, we creatively report for the first time a kind of RuPdM (M= Ni, Co, Fe) ultrathin nanosheets (NSs), which exhibit extraordinary electrochemical properties for HER under alkaline conditions. The overpotential of optimized trimetallic Ru₃₈Pd₃₄Ni₂₈ ultrathin NSs is only 20 mV (10 mA cm^-2), and the mass activity reaches 6.15 A mg^-1 _noble metal at -0.07 V vs RHE. It can be compared to Pt-based electrocatalysts, which have the highest mass activity currently reported. The durability tests also prove that the stability of the electrocatalyst is outstanding. DFT calculations disclose that the flexible modulation of electronic structures of RuPd ultrathin NSs is achieved by utilizing the additional 3d transition metals Fe, Co, and Ni. In particular, the Ni-3d bands act as the continuous electron-supply center for Ru to ensure an efficient electron transfer toward the adsorbates. Meanwhile, the stable Pd sites are critical for coupling the O-2pπ orbital in the initial H₂O splitting with a facile barrier. This work will open up a new era of non-Pt materials for alkaline hydrogen evolution toward practical application.

Ramakrishnan R, Venkateshaiah A, Krawczyk K, Padil VVT, Sobel B, Černík M. The Use of a Biopolymer Conjugate for an Eco-Friendly One-Pot Synthesis of Palladium-Platinum Alloys

Raising health and environmental concerns over the nanoparticles synthesized from hazardous chemicals have urged researchers to focus on safer, environmentally friendlier and cheaper alternatives as well as prompted the development of green synthesis. Apart from many advantages, green synthesis is often not selective enough (among other issues) to create shape-specific nanoparticle structures. Herein, we have used a biopolymer conjugate and Pd and Pt precursors to prepare sustainable bimetallic nanoparticles with various morphology types. The nanoparticles were synthesized by a novel green approach using a bio-conjugate of chitosan and polyhydroxybutyrate (Cs-PHB). The bio-conjugate plays the simultaneous roles of a reducing and a capping agent, which was confirmed by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and energy dispersive X-ray spectrometry (EDS) analysis, proving the presence of a Cs-PHB layer on the surface of the prepared nanoparticles. The EDS profile also revealed the elemental structure of these nanoparticles and confirmed the formation of a Pd/Pt alloy. TEM morphological analysis showed the formation of star-like, octahedron or decahedron Pd/Pt nanoparticles, depending on the synthesis conditions. The bimetallic Pd/Pt nanoparticles synthesized with various Pd/Pt molar ratios were successfully applied for the catalytic reduction of 4-nitrophenol to 4-aminophenol by borohydride. The calculated κc values (ratio of k_app to the concentration of the catalyst) revealed that the decahedron nanoparticles (size of 15 ± 4 nm), synthesized at the molar ratio of 2:1 (Pd/Pt), temperature of 130 °C, 10 g/L of Cs-PHB conjugate and time of 30 min, exhibited excellent catalytic activity compared to other bimetallic nanoparticles reported in the literature.

A biomass-derived porous carbon-based nanocomposite for voltammetric determination of quercetin

Porous carbon was prepared from wheat flour by alkali treatment and carbonization. The resulting biomass-derived porous carbon (BPC) was employed to prepare a Pt-Au-BPC nanocomposite by a hydrothermal method. The material was then placed on the surface of a carbon ionic liquid electrode (CILE). The Pt-Au-BPC was characterized by SEM, XPS, and the modified CILE by electrochemical methods. They revealed a porous structure, a large specific surface with high conductivity. Pt-Au-BPC/CILE was applied to the sensitive determination of quercetin. Electrochemical response was studied by cyclic voltammetry and differential pulse voltammetry (DPV). Under optimized experimental conditions, the oxidation peak current (measured at 0.48 V vs. Ag/AgCl by DPV) increases linearly in the 0.15 to 6.0 μM and in the 10.0 to 25.0 μM quercetin concentration range. The detection limit is 50.0 nM (at 3σ). The Pt-Au-BPC/CILE was applied to the direct determination of quercetin in ginkgo tablets sample and gave satisfactory results. Graphical abstract A Pt-Au-BPC nanocomposite modified carbon ionic liquid electrode was applied to differential pulse voltammetric determination of quercetin. BPC: biomass-derived porous carbon.

Pt and RhPt dendritic nanowires and their potential application as anodic catalysts for fuel cells

Fuel cells have a number of benefits over conventional combustion-based technologies and can be used in a range of important applications, including transportation, as well as stationary, portable and emergency backup power systems. One of the major challenges in this field, however lies in controlling catalyst design which is critical for developing efficient and cost-effective fuel cell technology. Herein, for the first time, we report a facile controlled synthesis of Pt and RhPt dendritic nanowires using ultrathin AuAg nanowires as sacrificial templates. These dendritic nanowires exhibit remarkable catalytic performance in the elecrochemical oxidation of methanol and formic acid. In particular, the RhPt dendritic nanostructures show very high resistance to catalyst poisoning in methanol oxidation. This research demonstrates the advantages of using bimetallic dendritic nanostructures and we believe that these materials and electrocatalytic studies are important for further advancement of fuel cell research and technology.

Platinum single-atom adsorption on graphene: a density functional theory study

Single-atom catalysis, which utilizes single atoms as active sites, is one of the most promising ways to enhance the catalytic activity and to reduce the amount of precious metals used. Platinum atoms deposited on graphene are reported to show enhanced catalytic activity for some chemical reactions, e.g. methanol oxidation in direct methanol fuel cells. However, the precise atomic structure, the key to understand the origin of the improved catalytic activity, is yet to be clarified. Here, we present a computational study to investigate the structure of platinum adsorbed on graphene with special emphasis on the edges of graphene nanoribbons. By means of density functional theory based thermodynamics, we find that single platinum atoms preferentially adsorb on the substitutional carbon sites at the hydrogen terminated graphene edge. The structures are further corroborated by the core level shift calculations. Large positive core level shifts indicate the strong interaction between single Pt atoms and graphene. The atomistic insight obtained in this study will be a basis for further investigation of the activity of single-atom catalysts based on platinum and graphene related materials.

Halide Ion-Mediated Synthesis of L10-FePt Nanoparticles with Tunable Magnetic Properties

L1₀-FePt nanoparticles (NPs) have great potential in areas of advanced magnetic and catalytic applications. Here, we present a facile control route for synthesis of hard magnetic L1₀-FePt NPs in which halide ions (Cl^-, Br^-, or I^-) were added to the synthetic process to promote the phase transformation. It is confirmed that the strong ionic binding force between halide ions and Fe³⁺ or Pt²⁺ ions could facilitate the formation of L1₀-FePt phase due to favoring growth of FePt NPs in a more thermodynamically stable way, which enables the formation of an ordered structure. L1₀-FePt NPs with the highest coercivity of 8.64 kOe and saturation magnetization of 64.21 emu/g at room temperature can be directly obtained by controlling the amount of the halide ions. In comparison with conventional solution phase reduction methods, the halide ion-assisted method shows enhanced capability to tune the growth of hard magnetic bimetallic NPs, particularly Pt-based bimetallic NPs.

Biofouling-Resistant Platinum Bimetallic Alloys

A new electrosynthetic approach for the fabrication of three-dimensional bicontinuous nanoporous platinum-based (3D-BC-NP-Pt(Au)) electrodes is described. Binary Pt-Ag alloys are first electrodeposited on gold substrates from appropriately formulated plating solutions. Following annealing and dealloying, a new family of nanoporous platinum-based electrodes emerges whose morphology, porosity, and chemical compositions depend on electrodeposition parameters and plating solution composition. Scanning electron microscopy images reveal an interesting and distinctive nanoporous gold-like microstructure with pores and ligaments in the 10-30 nm range arranged in a bicontinuous fashion throughout the thickness of the film. X-ray photoelectron spectroscopy (XPS) confirms that the as-formed electrodeposited films are silver-rich platinum binary alloys. Interestingly, XPS also reveals that after annealing and dealloying, the electrodes are actually ternary alloys containing platinum, gold, and a small amount of residual silver that remains after dealloying. Electrochemical measurements are consistent with this result and disclose a high surface area with roughness factors of 15-24. The ability to successfully conduct electrochemical measurements in biofouling solutions via a unique biosieving-like mechanism is demonstrated by exposure of the unique 3D bicontinuous nanoporous platinum-based electrode to fibrinogen in phosphate buffer and in a solution containing red blood cells. The work described herein has the potential to enrich the fields of electrochemical sensing and biosensing via the introduction of new 3D bicontinuous nanostructured porous platinum-based electrodes that can be easily and reliably fabricated.

Hierarchical concave layered triangular PtCu alloy nanostructures: rational integration of dendritic nanostructures for efficient formic acid electrooxidation

The rational construction of multi-dimensional layered noble metal nanostructures is a great challenge since noble metals are not layer-structured materials. Herein, we report a one-pot hydrothermal synthetic method for PtCu hierarchical concave layered triangular (HCLT) nanostructures using dl-carnitine, KI, poly(vinylpyrrolidone), CuCl2, and H2PtCl6. The PtCu HCLT nanostructure is comprised of multilayered triangular dendrites. Its layer number is tunable by changing dl-carnitine concentrations, and the concavity/convexity of the PtCu triangle nanostructures is tunable by changing the H2PtCl6/CuCl2 ratio or KI concentrations. Hierarchical trigonal bipyramid nanoframes are also obtained under certain conditions. Because of its advantageous nanostructure and bimetallic synergetic effect, the obtained PtCu HCLT nanostructure exhibits enhanced electrocatalytic activity and prolonged stability to formic acid oxidation compared to commercial Pt black, Pd/C and some other nanostructures.

Recent developments of nano-structured materials as the catalysts for oxygen reduction reaction

Developments of high efficient materials for electrocatalyst are significant topics of numerous researches since a few decades. Recent global interests related with energy conversion and storage lead to the expansion of efforts to find cost-effective catalysts that can substitute conventional catalytic materials. Especially, in the field of fuel cell, novel materials for oxygen reduction reaction (ORR) have been noticed to overcome disadvantages of conventional platinum-based catalysts. Various approaching methods have been attempted to achieve low cost and high electrochemical activity comparable with Pt-based catalysts, including reducing Pt consumption by the formation of hybrid materials, Pt-based alloys, and not-Pt metal or carbon based materials. To enhance catalytic performance and stability, numerous methods such as structural modifications and complex formations with other functional materials are proposed, and they are basically based on well-defined and well-ordered catalytic active sites by exquisite control at nanoscale. In this review, we highlight the development of nano-structured catalytic materials for ORR based on recent findings, and discuss about an outlook for the direction of future researches.

An Effective Pt-Cu/SiO2 Catalyst for the Selective Hydrogenation of Cinnamaldehyde

The bimetal catalyst Pt-Cu/SiO2 was prepared by the impregnation method. Its catalytic performance was investigated by the selective hydrogenation of cinnamaldehyde. Pt-Cu/SiO2 exhibited much higher selectivity (64.1%) to cinnamyl alcohol than Pt/SiO2 (3.7%), while they showed similar conversion of cinnamaldehyde. This enhancement was attributed to the increase in the amount of the Pt0 species on the Pt-Cu/SiO2 surface, which is derived from the interaction between Pt and Cu revealed by XRD and XPS.

Surface Passivation and Supersaturation: Strategies for Regioselective Deposition in Seeded Syntheses

Crystal growth theory predicts that heterogeneous nucleation will occur preferentially at defect sites, such as the vertices rather than the faces of shape-controlled seeds. Platonic metal solids are generally assumed to have vertices with nearly identical chemical potentials, and also nearly identical faces, leading to the useful generality that heterogeneous nucleation preserves the symmetry of the original seeds in the final product. Herein, we test the limits of this generality in the extreme of low supersaturation, in an effort to expand the methods available for inducing anisotropic overgrowth. We formulate a strategy for favoring localized deposition that differentiates between both different vertices and different edges or faces, i.e., regioselective deposition. Deposition followed a simple kinetic model for nucleation rate, depending on wetting, supersaturation, and temperature. We demonstrate our ability to independently study the effects of varying supersaturation and surface passivation. Regioselective heterogeneous nucleation was achieved at low supersaturation by a kinetic preference for high-energy defect-rich sites over lower-energy sites. This outcome was also achieved by using capping agents to passivate facet sites where deposition was not desired. Collectively, the results presented herein provide a model for breaking the symmetry of seeded growth and for achieving regioselective deposition.

Design of Ultrathin Pt-Based Multimetallic Nanostructures for Efficient Oxygen Reduction Electrocatalysis

Nanocatalysts with high platinum (Pt) utilization efficiency are attracting extensive attention for oxygen reduction reactions (ORR) conducted at the cathode of fuel cells. Ultrathin Pt-based multimetallic nanostructures show obvious advantages in accelerating the sluggish cathodic ORR due to their ultrahigh Pt utilization efficiency. A focus on recent important developments is provided in using wet chemistry techniques for making/tuning the multimetallic nanostructures with high Pt utilization efficiency for boosting ORR activity and durability. First, new synthetic methods for multimetallic core/shell nanoparticles with ultrathin shell sizes for achieving highly efficient ORR catalysts are reviewed. To obtain better ORR activity and stability, multimetallic nanowires or nanosheets with well-defined structure and surface are further highlighted. Furthermore, ultrathin Pt-based multimetallic nanoframes that feature 3D molecularly accessible surfaces for achieving more efficient ORR catalysis are discussed. Finally, the remaining challenges and outlooks for the future will be provided for this promising research field.