Site-Selective Zn-Metalation in Poly-Triphenyl Amine-based Porous Organic Polymer for Solid-Gas Phase CO2 Photoreduction

Harvesting solar energy to produce value-added chemicals from carbon dioxide (CO2) presents a promising route for addressing the complexities of sustainable energy systems and environmental issues. In this context, the development of metal-coordinated porous organic polymers (POPs) offers a vital avenue for improving the photocatalytic performance of organic motifs. The current study presents a metal-integrated photocatalytic system (namely, Zn@BP-POP) developed via a one-pot Friedel-Crafts (F.C.) acylation strategy, for solid-gas phase photochemical CO2 reduction to CO (CO2RR). The postsynthetic incorporation of metal (Zn) active sites on the host polymeric backbone of BP-POP significantly influences the catalytic activity. Notably, Zn@BP-POP demonstrates good photocatalytic performance in the absence of any cocatalyst and photosensitizer yielding CO while impeding the competitive hydrogen evolution reaction (HER) from water. The experimental findings collectively propose that the observed catalytic activity and selectivity arise from the synergistic interplay between the singular zinc catalytic centers and the light-harvesting capacity of the highly conjugated polymeric backbone. Further, X-ray absorption spectroscopy (XAS) analysis has significantly highlighted the prominent role played by the ZnN2O4 single sites in the polymeric framework for activating the gaseous CO2 molecules. Further, time-dependent density functional theory (DFT) analysis also reveals the thermodynamic feasibility of CO2RR over HER under optimized reaction conditions. This work cumulatively presents an effective strategy to demonstrate the importance of metal-active sites and effectively establish their structure-activity relationship during photocatalysis.

A simple and efficient synthesis of 5-hydroxymethylfurfural from carbohydrates using acidic ionic liquid grafted on silica gel

The catalytic application of 3-(4-sulfobutyl)-1H-imidazole-3-ium chloride immobilized on activated silica gel (SiO2-Imi-SO3H) for the production of 5-hydroxymethylfurfural is described here for the first time. This material was synthesized using a three-step method involving the grafting of chloropropyl groups onto activated silica gel, the substitution of zwitterions, and the acidification of zwitterions to form silica-supported ionic liquid. The successful immobilization of the IL on silica gel was confirmed through energy-dispersive X-ray (EDX) spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and elemental mapping. SiO2-Imi-SO3H-2 demonstrated good catalytic activity and recycling ability in fructose dehydration to 5-HMF. Several conditions for reaction were investigated, and an excellent 5-HMF yield (94.1%) was obtained after 4 h at 160 °C in dimethyl sulfoxide (DMSO) from fructose. Furthermore, a mechanism was proposed, the catalyst's reusability was investigated, and the catalyst was applied for the conversion of glucose to 5-HMF with other metal salts.

Nanofibrous Porous Organic Polymers and Their Derivatives: From Synthesis to Applications

Engineering porous organic polymers (POPs) into 1D morphology holds significant promise for diverse applications due to their exceptional processability and increased surface contact for enhanced interactions with guest molecules. This article reviews the latest developments in nanofibrous POPs and their derivatives, encompassing porous organic polymer nanofibers, their composites, and POPs-derived carbon nanofibers. The review delves into the design and fabrication strategies, elucidates the formation mechanisms, explores their functional attributes, and highlights promising applications. The first section systematically outlines two primary fabrication approaches of nanofibrous POPs, i.e., direct bulk synthesis and electrospinning technology. Both routes are discussed and compared in terms of template utilization and post-treatments. Next, performance of nanofibrous POPs and their derivatives are reviewed for applications including water treatment, water/oil separation, gas adsorption, energy storage, heterogeneous catalysis, microwave absorption, and biomedical systems. Finally, highlighting existent challenges and offering future prospects of nanofibrous POPs and their derivatives are concluded.

Self-Healing Conjugated Microporous Polyanilines for Effective and Continuous Catalytic Detoxification of 4-Nitrophenol to 4-Aminophenol

Detoxification of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) with high efficiency and dynamic performance is challenging for a polymeric catalyst. Herein, a series of conjugated microporous polyanilines (CMPAs), capable of efficiently catalytically reducing 4-NP, were synthesized based on the Buchwald-Hartwig cross-coupling reaction mechanism. By adjusting the types of linkers and the molar ratios of linker to core, CMPAs with different Brunauer-Emmett-Teller (BET) specific surface areas and reduction degrees were obtained and used as the catalysts in reducing 4-NP. The ultrahigh catalytic reduction efficiency (K = 141.32 s-1 g-1, kapp = 0.00353 s-1) was achieved when using CMPA-3-0.7 as the catalyst (prepared with 4,4'-diaminodiphenylamine as the linker and a 0.7:1 molar ratio of linker to core). The catalytic reduction performance exhibited a strong correlation with the reduction degree and BET specific surface area of CMPAs. Furthermore, they also exhibit excellent cycling stability and dynamic performance. The coexistence of a microporous structure and high BET specific surface area endowed CMPAs with an increased number of catalytic active centers. The reversible redox transformation of CMPAs in the presence of NaBH4 and air enabled self-healing (the oxidation units in CMPAs were reduced to reduction units by NaBH4, and the newly generated reduction unit in CMPAs was subsequently oxidized to its original state by the O2 in the air), leading to the reduction reaction of 4-NP proceeded continuously and stably. The aforementioned factors resulted in the high efficiency of CMPAs for reducing 4-NP to 4-AP, enhancing the practical application prospects of CMPAs in the detoxification of 4-NP wastewater.

Design and Synthesis of Porous Organic Polymers: Promising Catalysts for Lignocellulose Conversion to 5-Hydroxymethylfurfural and Derivates

In the face of the current energy and environmental problems, the full use of biomass resources instead of fossil energy to produce a series of high-value chemicals has great application prospects. 5-hydroxymethylfurfural (HMF), which can be synthesized from lignocellulose as a raw material, is an important biological platform molecule. Its preparation and the catalytic oxidation of subsequent products have important research significance and practical value. In the actual production process, porous organic polymer (POP) catalysts are highly suitable for biomass catalytic conversion due to their high efficiency, low cost, good designability, and environmentally friendly features. Here, we briefly describe the application of various types of POPs (including COFs, PAFs, HCPs, and CMPs) in the preparation and catalytic conversion of HMF from lignocellulosic biomass and analyze the influence of the structural properties of catalysts on the catalytic performance. Finally, we summarize some challenges that POPs catalysts face in biomass catalytic conversion and prospect the important research directions in the future. This review provides valuable references for the efficient conversion of biomass resources into high-value chemicals in practical applications.

Synthesis of Hollow Mesoporous Silica Nanospheroids with O/W Emulsion and Al(III) Incorporation and Its Catalytic Activity for the Synthesis of 5-HMF from Carbohydrates

Controlling the particle size as well as porosity and shape of silica nanoparticles is always a big challenge while tuning their properties. Here, we designed a cost-effective, novel, green synthetic method for the preparation of perforated hollow mesoporous silica nanoparticles (PHMS-1) using a very minute amount of cationic surfactant in o/w-type (castor oil in water) emulsion at room temperature. The grafting of Al(III) through post-synthetic modification onto this silica framework (PHMS-2, Si/Al ~20 atomic percentage) makes this a very efficient solid acid catalyst for the conversion of monosaccharides to 5-HMF. Brunauer–Emmett–Teller (BET) surface area for the pure silica and Al-doped mesoporous silica nanoparticles (MSNs) were found to be 866 and 660 m2g−1, respectively. Powder XRD, BET and TEM images confirm the mesoporosity of these materials. Again, the perforated hollow morphology was investigated using scanning electron microscopic analysis. Al-doped hollow MSNs were tested for acid catalytic-biomass conversion reactions. Our results show that PHMS-2 has much higher catalytic efficiency than contemporary aluminosilicate frameworks (83.7% of 5-HMF yield in 25 min at 160 °C for fructose under microwave irradiation).

Novel Challenges on the Catalytic Synthesis of 5-Hydroxymethylfurfural (HMF) from Real Feedstocks

The depletion of fossil resources makes the transition towards renewable ones more urgent. For this purpose, the synthesis of strategic platform-chemicals, such as 5-hydroxymethylfurfural (HMF), represents a fundamental challenge for the development of a feasible bio-refinery. HMF perfectly deals with this necessity, because it can be obtained from the hexose fraction of biomass. Thanks to its high reactivity, it can be exploited for the synthesis of renewable monomers, solvents, and bio-fuels. Sustainable HMF synthesis requires the use of waste biomasses, rather than model compounds such as monosaccharides or polysaccharides, making its production more economically advantageous from an industrial perspective. However, the production of HMF from real feedstocks generally suffers from scarce selectivity, due to their complex chemical composition and HMF instability. On this basis, different strategies have been adopted to maximize the HMF yield. Under this perspective, the properties of the catalytic system, as well as the choice of a suitable solvent and the addition of an eventual pretreatment of the biomass, represent key aspects of the optimization of HMF synthesis. On this basis, the present review summarizes and critically discusses the most recent and attractive strategies for HMF production from real feedstocks, focusing on the smartest catalytic systems and the overall sustainability of the adopted reaction conditions.

Nanoarchitectonics of Metal-Free Porous Polyketone as Photocatalytic Assemblies for Artificial Photosynthesis

The main component of natural gas is methane, whose combustion contributes to global warming. As such, sustainable, energy-efficient, nonfossil-based methane production is needed to satisfy current energy demands and chemical feedstocks. In this article, we have constructed a metal-free porous polyketone (TPA-DPA PPK) with donor-acceptor (D-A) groups with an extensive π-conjugation by facile Friedel-Crafts acylation reaction between triphenylamine (TPA) and pyridine-2,6-dicarbonyl dichloride (DPA). TPA-DPA PPK is a metal-free catalyst for visible-light-driven CO₂ photoreduction to CH₄, which can be used as a solar fuel in the absence of any cocatalyst and sacrificial agent. CH₄ production (152.65 ppm g^-1) is ∼5 times greater than that of g-C₃N₄ under the same test conditions. Charge-density difference plots from excited-state time-dependent density functional theory (TD-DFT) calculations indicate a depletion and accumulation of charge density among the donor/acceptor functional groups upon photoexcitation. Most notably, binding energies from DFT demonstrate that H₂O is more strongly bound with the pyridinic nitrogen group than CO_2, which shed insight into mechanistic pathways for photocatalytic CO₂ reduction.

Dehydration of fructose to 5-hydroxymethylfurfural over a mesoporous sulfonated high-crosslinked polymer in different solvents

SHCP was active and stable for dehydration of fructose to 5-HMF in DIO/H2O as H2O depressed oligomerization of 5-HMF.

Synthesis of Sulfonated Porous Organic Polymers with a Hydrophobic Core for Efficient Acidic Catalysis in Organic Transformations

Synthesis of sulfonated porous polymers with improved hydrophobicity and stability is of extreme importance in both academic research and industrial applications. However, there is often a trade-off between acidity and surface hydrophobicity of sulfonated polymers. In this study, we report a strategy for the synthesis of sulfonated porous organic polymers (S-PT) with improved hydrophobicity via free radical polymerization method by using a rigid and large multidentate monomer, 1,3,5-tri(4-vinylphenyl)-benzene, having a hydrophobic core. The results of vapor adsorption measurement show that S-PT has more hydrophobic properties than sulfonated poly(divinylbenzene) (S-PD), attributed to the hydrophobic core of its multidentate monomer. Furthermore, the optimization of sulfonation time established a balance between surface acidity and hydrophobicity. Under optimized conditions, S-PT afforded up to 113 mmol g^-1  h^-1 TOF in the esterification of oleic acid with methanol, more active than commercial Amberlyst-15 with TOF of 15 mmol g^-1  h^-1 and Nafion NR50 with TOF of 7 mmol g^-1  h^-1 . We believe that the findings of this study will provide useful insights to advance the design and synthesis of solid acid catalysts for organic transformations.

Organocatalyzed Heterocyclic Transformations In Green Media: A Review

Background:

Since the discovery of metal-free catalysts or organocatalysts about twenty years ago, a number of small molecules with different structures have been used to accelerate organic transformations. With the development of environmental awareness, to obtain highly efficient scaffolds, scientists have directed their studies towards synthetic methodologies that minimize or preferably eliminate the formation of waste, avoid toxic solvents and reagents and use renewable starting materials as far as possible.

Methods:

In this connection, the organocatalytic reactions providing efficiency and selectivity for most of the transformations have become an endless topic in organic chemistry since several advantages from both practical and environmental standpoints. Organocatalysts contributing to the transformation of reactants into products with the least possible waste production, have been serving the concept of green chemistry.

Results and Conclusion:

Organocatalysts have been classified based on their binding capacity to the substrate with covalent or noncovalent interactions involving hydrogen bonding and electrostatic interaction. Diverse types of small organic compounds including proline and its derivatives, phase-transfer catalysts, (thio)urease, phosphoric acids, sulfones, N-oxides, guanidines, cinchona derivatives, aminoindanol, and amino acids have been utilized as hydrogen bonding organocatalysts in different chemical transformations.

Microwave-assisted liquefaction of carbohydrates for 5-hydroxymethylfurfural using tungstophosphoric acid encapsulated dendritic fibrous mesoporous silica as a catalyst

Tungstophosphoric acid (TPA) encapsulated dendritic fibrous silica KCC-1 was prepared via a microemulsion system with the simple reflux method using cetyltrimethylammonium bromide as a structure-directing agent. The TPA impregnated on KCC-1 (ITPA-KCC-1) was also prepared for comparative. Various physicochemical techniques were used to characterize the synthesized materials and their activity evaluated in the 5-hydroxymethylfurfural (HMF) formation from carbohydrates derivatives of fructose, glucose and cellulose. The effect of various factors such as catalyst to substrate ratio, different solvents and temperature were investigated on the formation of HMF. The resultant encapsulated catalyst was very active in fructose dehydration with the yield of 92% HMF and full conversion of fructose at 120 °C for 30 min under the microwave heating condition without any salt additive in the THF solvent system as well as 95% in MIBK solvent. The HMF yield was achieved by 58% and 16.2% from glucose and cellulose in the DMSO solvent, respectively. The TPA-KCC-1 can be separated easily after reaction from the reaction mixture and reused atleast five times without substantial loss in catalytic activity. This study provides an easy encapsulation method for TPA in dendritic fibrous silica KCC-1 as a heterogeneous catalyst, and it should have great application potential in other biomass valorization processes.

Nanofibrils of a CuII-Thiophenyltriazine-Based Porous Polymer: A Diverse Heterogeneous Nanocatalyst

Herein, we report knitting of a thiophenyltriazine-based porous organic polymer (TTPOP) with high surface area and high abundance of nitrogen and sulfur sites, synthesized through a simple one-step Friedel-Crafts reaction of 2,4,6-tri(thiophen-2-yl)-1,3,5-triazine and formaldehyde dimethyl acetal in the presence of anhydrous FeCl₃, and thereafter grafting of Cu(OAc)₂·H₂O in the porous polymer framework to achieve the potential catalyst (Cu^II-TTPOP). TTPOP and Cu^II-TTPOP were characterized thoroughly utilizing solid-state ¹³C-CP MAS NMR, Fourier transform infrared, wide-angle powder X-ray diffraction, thermogravimetric analysis, and X-ray photoelectron spectroscopy and surface imaging by transmission electron microscopy and field emission scanning electron microscopy. The porosity of the nanomaterials was observed in the surface imaging and verified through conducting N₂ gas adsorption techniques. Keeping in mind the tremendous importance of C-C and C-N coupling and cyclization processes, the newly synthesized Cu^II-TTPOP was employed successfully for a wide range of organic catalytic transformations under mild conditions to afford directly valuable diindolylmethanes and spiro-analogues, phthalimidines, propargyl amines, and their sugar-based chiral compounds with high yields using readily available substrates. The highly stable new heterogeneous catalyst showed outstanding sustainability, robustness, simple separation, and recyclability.

Conjugated porous polymers: incredibly versatile materials with far-reaching applications

This review discusses conjugated porous polymers and focuses on relating design principles and synthetic methods to key properties and applications such as (photo)catalysis, gas storage, chemical sensing, energy storage and environmental remediation.

Synthesis of Porous Organic Polymer-Based Solid-Acid Catalysts for 5-Hydroxymethylfurfural Production from Fructose

Herein, we report the synthesis of nanoporous polytriphenylamine polymers (PPTPA) by a simple one-step oxidative polymerization pathway and the materials were sulfonated with chlorosulfonic acid to introduce acidic sulfonic groups to the polymers to form solid acid catalysts (SPPTPA). Magnetic properties were added to SPPTPA catalysts by depositing Fe3O4 nanoparticles to develop (FeSPPTPA) solid acid catalysts, for performing dehydration of fructose to 5-hydroxymethylfurfural (HMF), which is regarded as a sustainable source for liquid fuels and commodity chemicals. XRD, FTIR spectroscopy, SEM, TGA, and N2 sorption techniques were used to characterize synthesized materials. The FeSPPTPA80 nanocatalyst showed superior catalytic activities in comparison to other catalysts due to the nanorods that formed after sulfonation of the PPTPA polymeric material which gave the catalyst enough catalytic centers for dehydration reaction of fructose. The recyclability tests revealed that the magnetic solid acid catalysts could be reused for four consecutive catalytic runs, which made FeSPPTPA a potential nanocatalyst for production of HMF.

Porous Organic Polymer-Driven Evolution of High-Performance Cobalt Phosphide Hybrid Nanosheets as Vanillin Hydrodeoxygenation Catalyst

Hydrodeoxygenation (HDO) is a promising route for the upgrading of bio-oils to eco-friendly biofuel produced from lignocellulose. Herein, we report the sequential synthesis of a hybrid nanocatalyst Co_xP@POP, where substoichiometric Co_xP nanoparticles are distributed in a porous organic polymer (POP) via solid-state phosphidation of the Co₃O₄@POP nanohybrid system. We also explored the catalytic activity of the above two nanohybrids toward the HDO of vanillin, a typical compound of lignin-derived bio-oil to 2-methoxy-4-methylphenol, which is a promising future biofuel. The Co_xP@POP exhibited superior catalytic activity and selectivity toward desired product with improved stability compared to the Co₃O₄@POP. Based on advanced sample characterization results, the extraordinary selectivity of Co_xP@POP is attributed to the strong interaction of the cation of the Co_xP nanoparticle with the POP matrix and the consequent modifications of the electronic states. Through attenuated total reflectance-infrared spectroscopy, we have also observed different interaction strengths between vanillin and the two catalysts. The decreased catalytic activity of Co₃O₄@POP compared to Co_xP@POP catalyst could be attributed to the stronger adsorption of vanillin over the Co₃O₄@POP catalyst. Also from kinetic investigation, it is clearly demonstrated that the Co₃O₄@POP has higher activation energy barrier than the Co_xP@POP, which also reflects to the reduction of the overall efficiency of the Co₃O₄@POP catalyst. To the best of our knowledge, this is the first approach in POP-encapsulated cobalt phosphide catalyst synthesis and comprehensive study in establishing the structure-activity relationship in significant step-forwarding in promoting biomass refining.

Nanoparticulate and microporous solid acid catalysts bearing aliphatic sulfonic acids for biomass conversion

This work introduces new nanocatalytic systems based on microporous organic network (MON) chemistry for fructose conversion to 5-hydroxymethylfurfural (HMF). The efficiency of the catalytic systems could be improved through the size-controlled synthesis of MON materials. Through a predesigned building block approach and a post-synthetic modification, aliphatic sulfonic acid groups were incorporated into nano-sized MON materials to form N-MON-AS. The N-MON-AS showed selective conversion of fructose to HMF in up to 91% yield at 100 °C and good recyclability.

Catalytic Upgrading of Biomass-Derived Sugars with Acidic Nanoporous Materials: Structural Role in Carbon-Chain Length Variation

Shifting from petroleum-based resources to inedible biomass for the production of valuable chemicals and fuels is one of the significant aspects in sustainable chemistry for realizing the sustainable development of our society. Various renowned biobased platform molecules, such as 5-hydroxymethylfurfural, furfural, levulinic acid, and lactic acid, are successfully accessible from the transformation of biobased sugars. To achieve the specific reaction routes, heterogeneous nanoporous acidic materials have served as promising catalysts for the conversion of bio-sugars in the past decade. This Review summarizes advances in various nanoporous acidic materials for bio-sugar conversion, in which the number of carbon atoms is variable and controllable with the assistance of the switchable structure of nanoporous materials. The major focus of this Review is on possible reaction pathways/mechanisms and the relationships between catalyst structure and catalytic performance. Moreover, representative examples of catalytic upgrading of biobased platform molecules to biochemicals and fuels through selective C-C cleavage and coupling strategies over nanoporous acidic materials are also discussed.

Advances in Nanostructured Metal-Encapsulated Porous Organic-Polymer Composites for Catalyzed Organic Chemical Synthesis

Porous organic polymers (POPs) are of growing research interest owing to their high surface areas, stabilities, controllable chemical configurations, and tunable pore volumes. The molecular nanoarchitecture of POP provides metal or metal oxide binding sites, which is promising for the development of advanced heterogeneous catalysts. This article highlights the development of numerous kinds of POPs and key achievements to date, including their functionalization and incorporation of nanoparticles into their framework structures, characterization methods that are predominantly in use for POP-based materials, and their applications as catalysts in several reactions. Scientists today are capable of preparing POP-based materials that show good selectivity, activity, durability, and recoverability, which can help overcome many of the current environmental and industrial problems. These POP-based materials exhibit enhanced catalytic activities for diverse reactions, including coupling, hydrogenation, and acid catalysis.

5-Hydroxymethylfurfural (HMF) Production from Real Biomasses

The present paper reviews recent advances on the direct synthesis of 5-hydroxymethylfurfural (HMF) from different kinds of raw biomasses. In particular, in the paper HMF production from: (i) edible biomasses; (ii) non-edible lignocellulosic biomasses; (iii) food wastes (FW) have been reviewed. The different processes and catalytic systems have been reviewed and their merits, demerits and requirements for commercialisation outlined.

Optimization of hydrothermal conversion of bamboo (Phyllostachys aureosulcata) to levulinic acid via response surface methodology

In this study, the dilute acid hydrolysis of lignocellulosic bamboo (Phyllostachys aureosulcata) particles to levulinic acid in a hydrothermal synthesis reactor is reported. The aim of the study was to optimize the reaction conditions for maximum levulinic acid production in terms of reaction time (t), reaction temperature (T) and HCl concentration (c_HCl) via Response Surface Methodology (RSM). A maximum levulinic acid yield of 9.46 w% was predicted at the following reaction conditions: t of 3 h, T of 160 °C and c_HCl of 0.37 M. A maximal experimental yield of levulinic acid of 10.13 w% was observed, which in respect to the cellulose fraction of the bamboo particles corresponds to 34.60 w% or 48.05 mol%. Furfural, which is formed by the hemicellulose fraction of bamboo, has not been observed within the boundaries of the RSM model, since it is already degraded under the given reaction conditions. The conversion of levulinic acid and furfural occurred more or less simultaneously, however, furfural was more vulnerable to degradation reactions at the given process conditions. Therefore, if both fractions (cellulose + hemicellulose) are required to be valorized, further optimization is required. However, the global results of this study provide insight in the potential of lignocellulosic bamboo as an alternative platform to fossil sources.

Microwave effects in the dilute acid hydrolysis of cellulose to 5-hydroxymethylfurfural

In this study, the effect of microwaves on the production of 5-hydroxymethylfurfural (HMF) in a biphasic system was evaluated via a kinetic analysis. The reaction system consisted of an acidified aqueous phase and methyl isobutyl ketone (MIBK) as an organic phase, in which HMF is extracted directly upon formation during the reaction. Two identically shaped reactors were used to assess the influence of microwaves on the production of HMF. A borosilicate glass reactor was used to heat the reaction mixture via microwaves directly, whereas the silicon carbide (SiC) wall of the second reactor absorbed all microwaves and hence the reactor content was heated via convective heat transfer. An identical temperature profile was imposed on both reactors. Cellulose, glucose and fructose were chosen as feedstocks for the conversion to HMF. It was observed that microwaves have a significant effect on the reactions. The hydrolysis of cellulose to glucose was a 2.3 folds faster in the presence of microwaves at the process conditions (0.046 M HCl, 177 °C). The isomerization of glucose to fructose showed a similar increase (factor 2.5). The required energy input for the reaction was systematically higher for the SiC reactor.

Microwave-Assisted Conversion of Fructose to 5-Hydroxymethylfurfural Using Sulfonated Porous Carbon Derived from Biomass

In this study, a series of sulfonated carbon solid acid catalysts was prepared by a template method using fructose as the carbon source and zinc chloride as the catalyst and template. The reaction involving fructose dehydration to 5-hydroxymethylfurfural (5-HMF) was investigated using these catalysts with microwave assistance in dimethyl sulfoxide. The influence of different catalysts, catalyst amount, microwave power, fructose content, and reaction temperature, as well as the reusability of the catalyst, were investigated. The prepared catalysts were characterised by X-ray diffraction, FT-IR spectroscopy, scanning electron microscopy, nitrogen adsorption–desorption measurement, and temperature-programmed desorption of ammonia gas, and the total numbers of surface acid sites of these carbon-based solid acid catalysts were analysed by chemical adsorption–desorption of ammonia along with the standard curve for ammonia. The results revealed that the C2-SO3H catalyst exhibited the best activity. A 5-HMF yield of 87 % and fructose conversion of 99 % were achieved at 170°C in DMSO after 3 min. The microwave-assisted synthetic strategy was advantageous compared with the traditional method because this approach could shorten the total reaction time.

A facile approach for the synthesis of hydroxyl-rich microporous organic networks for efficient CO2 capture and H2 storage

A new series of porous organic networks (PONs) with N-donor sites and free hydroxyl groups in the backbone have been synthesized under high vacuum sealed tube conditions. These PONs possess high BET surface area and showed excellent H₂ and CO₂ storage capacities.

Sustainable pathway to furanics from biomass via heterogeneous organo-catalysis

An organic sulfonated graphitic carbon nitride is synthesized and its application has been demonstrated in the conversion of carbohydrates into furanics and related value-added products. The most important feature of the material is the stability and acidity, which could be utilized at elevated temperatures for cleaving carbohydrates and converting them into biologically important scaffolds and platform chemicals.

Hyperbranched polymer as an acceptor for polymer solar cells

For the first time, a hyperbranched polymer acceptor, HP-PDI, was designed, synthesized and applied in polymer solar cells (PSCs).

Pyridine-functionalized organic porous polymers: applications in efficient CO2 adsorption and conversion

Pyridine-functionalized porous organic polymers showed excellent CO₂ uptake capacity and served as efficient catalysts for the formylation of amines with CO₂/H₂ after metallization with Ru(0) nanoparticles.