Palladium(II)@Zirconium-Based Mixed-Linker Metal-Organic Frameworks as Highly Efficient and Recyclable Catalysts for Suzuki and Heck Cross-Coupling Reactions

High-Efficiency Photocatalytic Oxidation of Benzyl Alcohol by NH2-UiO-66-(Indole-2,3-Dione)-Fe

The photocatalytic oxidation of biomass-derived benzyl alcohol provides a promising way for the synthesis of benzoic acid, which is an important intermediate with wide applications. To improve the efficiency of photocatalytic benzyl alcohol oxidation to benzoic acid is of great interest. In this work, we propose the utilization of NH2-UiO-66-ID-Fe catalyst for photocatalytic oxidation of benzyl alcohol to benzoic acid, where NH2-UiO-66 is a typically used metal-organic framework, ID is indole-2,3-dione (ID) that has biocompatibility, light absorption property and can be covalently combined with amino-functionalized substances. The NH2-UiO-66-ID-Fe catalyst exhibits improved light absorption and photo-generated electron-hole separation ability compared with NH2-UiO-66. The photocatalytic performance of NH2-UiO-66-ID-Fe was examined for the oxidation of bio-based benzyl alcohol under mild conditions of air atmosphere, room temperature and no additive or additional oxidant involved. The results show that the conversion of benzyl alcohol and the selectivity to benzoic acid could both reach over 99 % in 6 h, and the generation rate of benzoic acid per gram of catalyst is 3.36 mmol g-1 h-1. The reaction mechanism was detected by radical trapping method and in situ electron paramagnetic resonance. This study presents an efficient and environmentally benign avenue for the synthesis of carboxylic acid compounds.

Phosphine-incorporated Metal-Organic Framework for Palladium Catalyzed Heck Coupling Reaction

As an emerging material with the potential to combine the high efficiency of homogeneous catalysts and high stability and recyclability of heterogeneous catalysts, metal-organic frameworks (MOFs) have been viewed as one of the candidates to produce catalysts of the next generation. Herein, we heterogenized the highly active mono(phosphine)-Pd complex on surface of UiO-66 MOF, as a catalyst for Suzuki and Heck cross coupling reactions. The successful immobilization of these Pd-monophosphine complexes on MOF surface to form UiO-66-PPh2-Pd was characterized and confirmed via comprehensive set of analytical methods. UiO-66-PPh2-Pd showed high activity and selectivity for both Suzuki and Heck Cross Coupling Reactions. This strategy enabled facile access to mono(phosphine) complexes which are challenging to design and require multistep synthesis in homogeneous systems, paving the way for future MOF catalysts applications by similar systems.

A supported pyridylimine-cobalt catalyst for N-formylation of amines using CO2

N-Formylation of amines with CO2 as a cheap and non-toxic C1-feedstock and hydrosilane reducing agent is a practical and environment friendly method to synthesize formamides. This study describes an efficient and chemoselective mono-N-formylation of amines using CO2 and phenylsilane under mild conditions using a porous metal-organic framework (MOF)-supported single-site cobalt catalyst (pyrim-UiO-Co). The pyrim-UiO-Co MOF has a UiO-topology, and its organic linkers bear a pyridylimine ligated Co catalytic moiety. A wide range of aliphatic and aromatic amines are transformed into desired N-formamides in moderate to excellent yields under 1-5 bar CO2. Pyrim-UiO-Co is tolerant to various functional groups and could be recycled and reused at least 10 times. Mechanistic investigation using kinetic, spectroscopic and density functional theory studies suggests that the formylation of benzylamine proceeds sequentially via oxidative addition of PhSiH3 and CO2 insertion, followed by a turn-over limiting reaction with an amine. Our work highlights the importance of MOF-based Earth-abundant metal catalysts for the practical and eco-friendly synthesis of fine chemicals using cheap feedstocks.

Polymeric Copper(II) Complexes with a Newly Synthesized Biphenyldicarboxylic Acid Schiff Base Ligand—Synthesis, Structural and Thermal Characterization

The newly synthesized biphenyldicarboxylic acid Schiff base and its complexes with Cu(II) were synthesized, and their spectroscopic and structural analysis was performed. The reaction of the ligand and copper(II) acetate in different solvents resulted in the formation of two solvatomorphic complexes, one with MeOH, and the other with DMF molecules, in the crystal lattice. The differences in the results of the thermal analysis could be explained by the different polarities of the solvents present. SC-XRD analysis revealed that the ligand is coordinated as a dianion, in a pentadentate manner, through two phenoxide oxygen atoms, two azomethine nitrogen atoms, and with the oxygen atom of one carboxylate functioning as a bridge that connects the monomeric units. The coordination polyhedron was described with several parameters obtained from different methods of calculation. The presence of different solvents in the crystal structure results in differences in the H-bond networks, and an overall different crystal packing of the structural units in the obtained complexes.

An advancement in the synthesis of nano Pd@magnetic amine-Functionalized UiO-66-NH2 catalyst for cyanation and O-arylation reactions

The magnetic MOF-based catalytic system has been reported here to be an efficient catalyst for synthesis of benzonitriles and diarylethers of aryl halides under optimal conditions. The MOF catalyst was built based on magnetic nanoparticles and UiO-66-NH₂ which further modified with 2,4,6-trichloro-1,3,5-triazine and 5-phenyl tetrazole at the same time and the catalyst structure was confirmed by various techniques. This new modification has been applied to increase anchoring palladium into the support. Furthermore, the products' yields were obtained in good to excellent for all reactions under mild conditions which result from superior activity of the synthesized heterogeneous catalyst containing palladium. Also, the magnetic property of the MOF-based catalyst makes it easy to separate from reaction mediums and reuse in the next runs.

Palladium Nanoparticles Anchored on Magnesium Organosilicate: An Effective and Selective Catalyst for the Heck Reaction

A new and effective palladium catalyst supported on a magnesium organosilicate for application in the Heck reaction is presented. A group of compounds comprising 22 examples were synthesized in moderate to high yields (up to 99%) within a short time. The palladium supported on magnesium organosilicate catalyst was characterized as an amorphous solid by SEM, containing around 33% of palladium inside the solid, and even with this low quantity of palladium, the catalyst was very efficient in the Heck reaction. Besides, based on the Scherrer equation, the crystallite size of the synthesized palladium nanoparticles was ultrasmall (around 1.3 nm). This strategy is a simple and efficient route for the formation of C–C bonds via the Heck cross-coupling reaction.

Bi Metal-Organic Framework (Ce/Ni-BTC) as Heterogeneous Catalyst for the Green Synthesis of Substituted Chromeno[4, 3-b]quinolone under Solvent Free Condition

AIMS

Novel bi metal organic framework (b-MOF) is synthesized and used as a heterogeneous catalyst for the synthesis of chromeno[4, 3-b]quinolone derivatives via one-pot and solvent-free, four-component reaction of dimedone, aromatic aldehydes, 4-hydroxycoumarin and ammonium acetate at 110°C.

BACKGROUND

b-MOFs can be used as a heterogeneous catalyst in the synthesis of many organic compounds. The active and multi-purpose sites in b-MOFs provide a varied function in their catalytic applications. In this paper, reductive CES method is applied for the synthesis of Ce_0.47/Ni_0.53-BTC b-MOF. The resulting b-MOF was used as a heterogeneous catalyst for the synthesis of chromeno[4, 3-b]quinolone via one-pot and solvent-free, fourcomponent reaction of dimedone, aromatic aldehyde, 4-hydroxycoumarin and ammonium acetate at 110 °C.

METHOD

Ce_0.47/Ni_0.53-BTC was synthesized in an electrochemical cell composed of a stainless steel foil with a size of 5cm×5cm centered between two 5cm×5cm sized graphite plates as the anodes by the cathodic current density of 0.2 A/dm² and placed in a solution of cerium nitrate (0.3 g), nickel nitrate (0.3 g), H₃BTC (0.2 g) and NaNO₃ (0.1 g) in ethanol (500 mL). Ce_0.47/Ni_0.53-BTC (10 mg) was added to a mixture of dimedone (1 mmol), aromatic aldehyde (1 mmol), hydroxycoumarin (1 mmol) and ammonium acetate (1.5 mmol) and stirred at 110 °C under solvent-free conditions for 45 min. The reaction evolution was controlled by the TLC (hexane:ethyl acetate, 4:1). Then, boiling ethanol was added to the reaction mixture and stirred at room temperature for 15 min. After the reaction completion, the catalyst was separated by centrifuge. Finally, the reaction mixture was placed in an ice bath, which resulted in a white solid product and recrystallized from ethanol to give the pure product.

RESULT

The b-MOF catalyst showed very good efficiency in the synthesis of the desired compounds and can be easily recovered by centrifuge and reused at least five times without a decrease in catalytic activity.

CONCLUSION

In this report, a novel bi metal-organic framework (Ce0.47/Ni0.53-BTC) is synthesized via the cathodic electrosynthesis method. The synthesized b-MOF is fully characterized by several characterization methods. The catalytic activity of Ce0.47/Ni0.53-BTC is investigated in the synthesis of chromeno[4, 3-b]quinolone derivatives via one-pot four-component reaction of dimedone, aromatic aldehyde, 4-hydroxycoumarin and ammonium acetate. The reaction optimization results showed that the highest isolated yield was obtained when the reaction was performed in solvent-free conditions at 110 °C. The catalyst showed to be highly efficient in the synthesis of the desired compounds and performing the reaction utilizing various starting materials gave the products in good isolated yields, which proves the generality and the scope of the method. The catalyst could easily be recovered by centrifuge and reused at least five times without a decrease in catalytic activity.

Chitin microsphere supported Pd nanoparticles as an efficient and recoverable catalyst for CO oxidation and Heck coupling reaction

Chitin derived from seafood wastes is a sustainable biopolymer, which can be used to constructe new materials to reduce the environmental pollution caused by non-biodegradable plastics. Herein, nanofibrous microspheres fabricated from chitin solution were used as carriers to construct three different chitin-supported Pd catalysts through diverse activation methods, subsequently revealed their differences in structure and performance. The palladium nanoparticles were firmly and highly dispersed on the microspheres due to the interconnected nanofibrous networks and functional groups of chitin, confirmed by various physicochemical characterizations. As the best candidate catalyst of Pd/chitin-Ar, in the CO oxidation reaction, which achieved 100% CO conversion with a lower Pd content, and exhibited excellent stability in 24-hours cycle reaction. Importantly, the catalyst was further applied in Heck coupling reaction, which also displayed competitive catalytic activity and stability (∼6runs, 94%). This utilizing of biomass resource to build catalyst materials would be important for the sustainable chemistry.

Single-Site Cobalt-Catalyst Ligated with Pyridylimine-Functionalized Metal-Organic Frameworks for Arene and Benzylic Borylation

We report a highly active single-site heterogeneous cobalt-catalyst based on a porous and robust pyridylimine-functionalized metal-organic frameworks (pyrim-MOF) for chemoselective borylation of arene and benzylic C-H bonds. The pyrim-MOF having UiO-68 topology, constructed from zirconium-cluster secondary building units and pyridylimine-functionalized dicarboxylate bridging linkers, was metalated with CoCl₂ followed by treatment of NaEt₃BH to give the cobalt-functionalized MOF-catalyst (pyrim-MOF-Co). Pyrim-MOF-Co has a broad substrate scope, allowing the C-H borylation of halogen-, alkoxy-, alkyl-substituted arenes as well as heterocyclic ring systems using B₂pin₂ or HBpin (pin = pinacolate) as the borylating agent to afford the corresponding arene- or alkyl-boronate esters in good yields. Pyrim-MOF-Co gave a turnover number (TON) of up to 2500 and could be recycled and reused at least 9 times. Pyrim-MOF-Co was also significantly more robust and active than its homogeneous control, highlighting the beneficial effect of active-site isolation within the MOF framework that prevents intermolecular decomposition. The experimental and computational studies suggested (pyrim^•-)Co^I(THF) as the active catalytic species within the MOF, which undergoes a mechanistic pathway of oxidative addition, turnover limiting σ-bond metathesis, followed by reductive elimination to afford the boronate ester.

PdII Immobilized on Ferromagnetic Multi-Walled Carbon Nanotubes Functionalized by Aminated 2-Chloroethylphosphonic Acid with S-Methylisothiourea (FMMWCNTs@CPA@SMTU@PdII NPs) Applied as a Highly Efficient and Recyclable Nanostructured Catalyst for Suzuki–Miyaura and Mizoroki–Heck Cross-Coupling Reactions in Solvent-Free Conditions

The new ferromagnetic nanostructured FMMWCNTs@CPA@SMTU@PdII NPs (IV) as an eco-friendly heterogeneous nanocatalyst with a particle size of ~20–30nm reported earlier by our group has been found to be very effective for Suzuki–Miyaura and Mizoroki–Heck cross-coupling reactions at ambient temperature. The procedure has been applied for a wide range of aryl halides, arylboronic acids, and alkenes. The magnetic separation by an external magnetic field, mild reaction conditions, and catalyst reusability up to four times without significant decrease in catalytic activity (reduced catalytic activity from 11 to 18% in the fifth, sixth, and seventh cycles) made the present method sustainable and economically viable for C–C cross-coupling reactions.

Interpenetration isomers in isoreticular amine-tagged zinc MOFs

Subtleties of interpenetration are exposed and classified in the IRMOF-9 system.

The impact of an isoreticular expansion strategy on the performance of iodine catalysts supported in multivariate zirconium and aluminum metal–organic frameworks

A new iodine catalyst was supported in two different MOFs and the catalytic activity for the oxidation of hydroquinones and catechols was evaluated.

Rational Design of Catalytic Centers in Crystalline Frameworks

Crystalline frameworks including primarily metal organic frameworks (MOF) and covalent organic frameworks (COF) have received much attention in the field of heterogeneous catalysts recently. Beyond providing large surface area and spatial confinement, these crystalline frameworks can be designed to either directly act as or influence the catalytic sites at molecular level. This approach offers a unique advantage to gain deeper insights of structure-activity correlations in solid materials, leading to new guiding principles for rational design of advanced solid catalysts for potential important applications related to energy and fine chemical synthesis. In this review, recent key progress achieved in designing MOF- and COF-based molecular solid catalysts and the mechanistic understanding of the catalytic centers and associated reaction pathways are summarized. The state-of-the-art rational design of MOF- and COF-based solid catalysts in this review is grouped into seven different areas: (i) metalated linkers, (ii) metalated moieties anchored on linkers, (iii) organic moieties anchored on linkers, (iv) encapsulated single sites in pores, and (v) metal-mode-based active sites in MOFs. Along with this, some attention is paid to theoretical studies about the reaction mechanisms. Finally, technical challenges and possible solutions in applying these catalysts for practical applications are also presented.

Ru/UiO-66 Catalyst for the Reduction of Nitroarenes and Tandem Reaction of Alcohol Oxidation/Knoevenagel Condensation

A 3.1% Ru/UiO-66 material was prepared by adsorption of RuCl₃ from ethyl acetate on to MOF UiO-66, followed by reduction with NaBH₄. The presence of acid-base and ox-red sites allows this 3.1% Ru/UiO-66 material acting as a bifunctional catalyst for the reduction of nitroarenes and tandem reaction of alcohol oxidation/Knoevenagel condensation. The high efficiency of 3.1% Ru/UiO-66 was demonstrated in the reduction of nitroarenes to amines. This system can be applied as a catalyst for at least six successive cycles without loss of activity. The 3.1% Ru/UiO-66 catalyst also was active in the tandem aerobic oxidation of alcohols/Knoevenagel condensation with malononitrile. However, the activity of this catalyst strongly decreased in the second cycle. A combination of physicochemical and catalytic experimental data indicated that Ru nanoparticles are the active sites both for the catalytic reduction of nitro compounds and the aerobic oxidation of alcohols. The activity for the Knoevenagel condensation reaction was from the existence of the "Zr ⁿ⁺-O^2- Lewis acid-base" pair in the framework of UiO-66.

Catalysis and photocatalysis by metal organic frameworks

This review aims to provide different strategies employed to use MOFs as solid catalysts and photocatalysts in organic transformations.

Tailoring the structure, pH sensitivity and catalytic performance in Suzuki–Miyaura cross-couplings of Ln/Pd MOFs based on the 1,1′-di(p-carboxybenzyl)-2,2′-diimidazole linker

Four Pd/Ln MOFs have been synthesized and tested as catalysts in Suzuki–Miyaura reactions in neat water, neat ethanol as well as water–ethanol mixtures.

A magnetic metal–organic framework as a highly active heterogeneous catalyst for one-pot synthesis of 2-substituted alkyl and aryl(indolyl)kojic acid derivatives

A novel magnetic metal–organic framework, NiFe₂O₄@MOF-5, was prepared and demonstrated to be a highly efficient catalyst for the one-pot three-component reaction of aldehyde, indole, and kojic acid.

The synergistic effect of cobalt on a Pd/Co catalyzed Suzuki–Miyaura cross-coupling in water

We report on the first Suzuki–Miyaura reaction promoted by a phosphine-free trimetallic Pd₂/Co catalyst proceeding in water, under aerobic conditions. Results reveal a synergistic Co–Pd cooperation.