Mapping the Catalytic-Space for the Reactivity of Metal-free Boron Nitride with O2 for H2O-Mediated Conversion of Methane to HCHO and CO

Transition-metal based catalysts have been widely employed to catalyze partial oxidation of light alkanes. Recently, metal-free hexagonal-boron nitride (h-BN) has emerged as a promising catalyst for the oxidation of CH4 to HCHO and CO; however, the intricate catalytic surface of h-BN at molecular and electronic levels remains inadequately understood. Key questions include how electron-deficient boron atoms in h-BN reduce O2, and whether the partial oxidation of methane over h-BN exhibits similarities to traditional transition-metal catalysts. In our study, we computationally-mapped in-detail the surface catalytic-space of h-BN for methane oxidation. We considered different structures of h-BN and show that these structures contain numerous sites for O2 binding and therefore various routes for methane oxidation are possible. The activation barriers for methane oxidation via various paths varies from ~83 to ~123 kcal mol-1. To comprehend the differences in activation barriers, we employed geometrical, orbital and distortion/interaction analysis (DIA). Orbital analysis reveals that methane activation over h-BN in presence of dioxygen follows a standard hydrogen atom transfer mechanism. It is also shown that water plays an intriguing role in reducing the barrier for HCHO and CO formation by acting as a bridge.

Tracking Active Phase Behavior on Boron Nitride during the Oxidative Dehydrogenation of Propane Using Operando X-ray Raman Spectroscopy

Hexagonal boron nitride (hBN) is a highly selective catalyst for the oxidative dehydrogenation of propane (ODHP) to propylene. Using a variety of ex situ characterization techniques, the activity of the catalyst has been attributed to the formation of an amorphous boron oxyhydroxide surface layer. The ODHP reaction mechanism proceeds via a combination of surface mediated and gas phase propagated radical reactions with the relative importance of both depending on the surface-to-void-volume ratio. Here we demonstrate the unique capability of operando X-ray Raman spectroscopy (XRS) to investigate the oxyfunctionalization of the catalyst under reaction conditions (1 mm outer diameter reactor, 500 to 550 °C, P = 30 kPa C3H8, 15 kPa O2, 56 kPa He). We probe the effect of a water cofeed on the surface of the activated catalyst and find that water removes boron oxyhydroxide from the surface, resulting in a lower reaction rate when the surface reaction dominates and an enhanced reaction rate when the gas phase contribution dominates. Computational description of the surface transformations at an atomic-level combined with high precision XRS spectra simulations with the OCEAN code rationalize the experimental observations. This work establishes XRS as a powerful technique for the investigation of light element-containing catalysts under working conditions.

Auto-accelerated dehydrogenation of alkane assisted by in-situ formed olefins over boron nitride under aerobic conditions

Oxidative dehydrogenation (ODH) of alkane over boron nitride (BN) catalyst exhibits high olefin selectivity as well as a small ecological carbon footprint. Here we report an unusual phenomenon that the in-situ formed olefins under reactions are in turn actively accelerating parent alkane conversion over BN by interacting with hydroperoxyl and alkoxyl radicals and generating reactive species which promote oxidation of alkane and olefin formation, through feeding a mixture of alkane and olefin and DFT calculations. The isotope tracer studies reveal the cleavage of C-C bond in propylene when co-existing with propane, directly evidencing the deep-oxidation of olefins occur in the ODH reaction over BN. Furthermore, enhancing the activation of ethane by the in-situ formed olefins from propane is successfully realized at lower temperature by co-feeding alkane mixture strategy. This work unveils the realistic ODH reaction pathway over BN and provides an insight into efficiently producing olefins.

In Situ Generated Boron Peroxo as Mild Oxidant in Propane Oxidative Dehydrogenation Revealed by Density Functional Theory Study

Boron-based materials catalyzing oxidative dehydrogenation is emerging as a promising protocol for efficient conversion of light alkanes to olefins, while the origin of its remarkable selectivity remains unclear. By means of density functional theory calculations, this work addresses the crucial role of boron peroxo as the mild oxidant in propane ODH: (1) Surface boron peroxo species can be generated in situ in the presence of peroxo species, preferably at the >B-O-B< sites of the zigzag edge, and show high activity to dehydrogenate propane (ΔG^⧧ = 13.5 kcal/mol, ΔG = 8.9 kcal/mol). (2) The >B-O-O· site shows high discriminability of secondary H over primary H of the propane molecule, leading to significantly higher yield of iso-propyl (CH₃ĊHCH₃) than n-propyl (CH₃CH₂ĊH₂); thus, propene formation is favored over deep oxidation. This provides physical insights into the origin of the remarkable olefin selectivity in the boron-containing ODH catalytic systems.

Green synthesis of propylene oxide directly from propane

The chemical industry faces the challenge of bringing emissions of climate-damaging CO₂ to zero. However, the synthesis of important intermediates, such as olefins or epoxides, is still associated with the release of large amounts of greenhouse gases. This is due to both a high energy input for many process steps and insufficient selectivity of the underlying catalyzed reactions. Surprisingly, we find that in the oxidation of propane at elevated temperature over apparently inert materials such as boron nitride and silicon dioxide not only propylene but also significant amounts of propylene oxide are formed, with unexpectedly small amounts of CO₂. Process simulations reveal that the combined synthesis of these two important chemical building blocks is technologically feasible. Our discovery leads the ways towards an environmentally friendly production of propylene oxide and propylene in one step. We demonstrate that complex catalyst development is not necessary for this reaction.

Synthesis of Turbostratic Boron Nitride: Effect of Urea Decomposition

Since the recent discovery of the template-free synthesis of porous boron nitride, research on the synthesis and application of the material has steadily increased. Nevertheless, the formation mechanism of boron nitride is not yet fully understood. Especially for the complex precursor decomposition of urea-based turbostratic boron nitride (t-BN), a profound understanding is still lacking. Therefore, in this publication, we investigate the influence of different common pre-heating temperatures of 100, 200, 300, and 400 °C on the subsequent properties of t-BN. We show that the structure and porosity of t-BN can be changed by preheating, where a predominantly mesoporous material can be obtained. Within these investigations, the sample BN-300/2 depicts the highest mesopore surface area of 242 m² g^-1 with a low amount of micropores compared to other BNs. By thermal gravimetric analysis, X-ray photoelectron spectroscopy, and Raman spectroscopy, valid details about the formation of intermediates, types of chemical bonds, and the generation of t-BN are delivered. Hence, we conclude that the formation of a mesoporous material arises due to a more complete decomposition of the urea precursor by pre-heating.

Boron nitride materials as emerging catalysts for oxidative dehydrogenation of light alkanes

Light olefins (C₂-C₄) play a crucial role as basic ingredients in chemical industry, and oxidative dehydrogenation (ODH) of light alkanes to olefins has been one of the popular routes since the shale gas revolution. ODH of light alkanes has advantages on energy-and-cost saving as compared with traditional direct dehydrogenation, but it is restricted by its overoxidation which results in the relatively low olefin selectivity. Boron nitride (BN), an interesting nanomaterial with an analogous structure to graphene, springs out and manifests the superior performance as advanced catalysts in ODH, greatly improving the olefin selectivity under high alkane conversion. In this review, we introduce BN nanomaterials in four dimensions together with typical methods of syntheses. Traditional catalysts for ODH are also referred as comparison on several indicators-olefin yields and preparation techniques, including the metal-based catalysts and the non-metal-based catalysts. We also surveyed the BN catalysts for ODH reaction in recent five years, focusing on the different dimensions of BN together with the synthetic routes accounting for the active sites and the catalytic ability. Finally, an outlook of the potential promotion on the design of BN-based catalysts and the possible routes for the exploration of BN-related catalytic mechanisms are proposed.

Partial oxidation of methane to methanol on boron nitride at near critical acetonitrile

Direct catalytic conversion of methane to methanol with O₂ has been a fundamental challenge in unlocking abundant natural gas supplies. Metal-free methane conversion with 17% methanol yield based on the limiting reagent O₂ at 275 °C was achieved with near supercritical acetonitrile in the presence of boron nitride. Reaction temperature, catalyst loading, dwell time, methane–oxygen molar ratio, and solvent-oxygen molar ratios were identified as critical factors controlling methane activation and the methanol yield. Extension of the study to ethane (C2) showed moderate yields of methanol (3.6%) and ethanol (4.5%).

Modulation of ODH Propane Selectivity by Zeolite Support Desilication: Vanadium Species Anchored to Al-Rich Shell as Crucial Active Sites

The commercially available zeolite HY and its desilicated analogue were subjected to a classical wet impregnation procedure with NH₄VO₃ to produce catalysts differentiated in acidic and redox properties. Various spectroscopic techniques (in situ probe molecules adsorption and time-resolved propane transformation FT-IR studies, XAS, ⁵¹V MAS NMR, and 2D COS UV-vis) were employed to study speciation, local coordination, and reducibility of the vanadium species introduced into the hierarchical faujasite zeolite. The acid-based redox properties of V centres were linked to catalytic activity in the oxidative dehydrogenation of propane. The modification of zeolite via caustic treatment is an effective method of adjusting its basicity—a parameter that plays an important role in the ODH process. The developed mesopore surface ensured the attachment of vanadium species to silanol groups and formation of isolated (SiO)₂(HO)V=O and (SiO)₃V=O sites or polymeric, highly dispersed forms located in the zeolite micropores. The higher basicity of HY_deSi, due to the presence of the Al-rich shell, aided the activation of the C−H bond leading to a higher selectivity to propene. Its polymerisation and coke formation were inhibited by the lower acid strength of the protonic sites in desilicated zeolite. The Al-rich shell was also beneficial for anchoring V species and thus their reducibility. The operando UV-vis experiments revealed higher reactivity of the bridging oxygens V-O-V over the oxo-group V=O. The (SiO)₃V=O species were found to be ineffective in propane oxidation when temperature does not exceed 400 °C.

Structure, Properties and Applications of Two-Dimensional Hexagonal Boron Nitride

Hexagonal boron nitride (h-BN) has emerged as a strong candidate for two-dimensional (2D) material owing to its exciting optoelectrical properties combined with mechanical robustness, thermal stability, and chemical inertness. Super-thin h-BN layers have gained significant attention from the scientific community for many applications, including nanoelectronics, photonics, biomedical, anti-corrosion, and catalysis, among others. This review provides a systematic elaboration of the structural, electrical, mechanical, optical, and thermal properties of h-BN followed by a comprehensive account of state-of-the-art synthesis strategies for 2D h-BN, including chemical exfoliation, chemical, and physical vapor deposition, and other methods that have been successfully developed in recent years. It further elaborates a wide variety of processing routes developed for doping, substitution, functionalization, and combination with other materials to form heterostructures. Based on the extraordinary properties and thermal-mechanical-chemical stability of 2D h-BN, various potential applications of these structures are described.

Understanding the Unique Antioxidation Property of Boron-Based Catalysts during Oxidative Dehydrogenation of Alkanes

Boron-based catalysts show excellent performance in oxidative dehydrogenation (ODH) of light alkanes to alkenes with high selectivity and extremely good antioxidation properties. However, the anti-deep-oxidation mechanism remains unclear. Herein, we chose h-BN and B₂O₃ as representative boron-based catalysts to investigate their reactions with two important intermediates in the light alkane ODH, Et· (evolving to ethene) and EtO· (evolving to ethene or CO_x), to elucidate the origin of the antioxidation of alkanes. The density functional theory calculations reveal that surface boron sites could eliminate alkoxy in their vicinity, resulting in exceptional inhibition of alkane deep-oxidation. The analysis of the electronic and geometric structures of key stationary points showed that the oxophilicity of B determined the low deep-oxidation of alkanes, and the homoleptic coordination of B with all three ligating atoms being O moderately enhanced its oxophilicity. This work represents a novel conceptual advance in the mechanistic understanding of alkane ODH.

Selective Oxidation of Isobutane to Methacrylic Acid and Methacrolein: A Critical Review

Selective oxidation of isobutane to methacrolein (MAC) and methacrylic acid (MAA) has received great interest both in the chemical industry and in academic research. The advantages of this reaction originate not only from the low cost of the starting material and reduced process complexity, but also from limiting the use of toxic reactants and the production of wastes. Successive studies and reports have shown that heteropolycompounds (HPCs) with Keggin structure (under the form of partially neutralized acids with increased stability) can selectively convert isobutane to MAA and MAC due to their strong and tunable acidity and redox properties. This review hence aims to discuss the Keggin-type HPCs that have been used in recent years to catalyze the oxidation of isobutane to MAA and MAC, and to review alternative metal oxides with proper redox properties for the same reaction. In addition, the influence of the main reaction conditions will be discussed.

BN-Doped Metal-Organic Frameworks: Tailoring 2D and 3D Porous Architectures through Molecular Editing of Borazines

Building on the MOF approach to prepare porous materials, herein we report the engineering of porous BN-doped materials using tricarboxylic hexaarylborazine ligands, which are laterally decorated with functional groups at the full-carbon 'inner shell'. Whilst an open porous 3D entangled structure could be obtained from the double interpenetration of two identical metal frameworks derived from the methyl substituted borazine, the chlorine-functionalised linker undergoes formation of a porous layered 2D honeycomb structure, as shown by single-crystal X-ray diffraction analysis. In this architecture, the borazine cores are rotated by 60° in alternating layers, thus generating large rhombohedral channels running perpendicular to the planes of the networks. An analogous unsubstituted full-carbon metal framework was synthesised for comparison. The resulting MOF revealed a crystalline 3D entangled porous structure, composed by three mutually interpenetrating networks, hence denser than those obtained from the borazine linkers. Their microporosity and CO2 uptake were investigated, with the porous 3D BN-MOF entangled structure exhibiting a large apparent BET specific surface area (1091 m2  g-1 ) and significant CO2 reversible adsorption (3.31 mmol g-1 ) at 1 bar and 273 K.

Oxidative dehydrogenation of light alkanes to olefins on metal-free catalysts

Metal-free boron- and carbon-based catalysts have shown both great fundamental and practical value in oxidative dehydrogenation (ODH) of light alkanes. In particular, boron-based catalysts show a superior selectivity toward olefins, excellent stability and atom-economy to valuable carbon-based products by minimizing CO2 emission, which are highly promising in future industrialization. The carbonaceous catalysts also exhibited impressive behavior in the ODH of light alkanes helped along by surface oxygen-containing functional groups. This review surveyed and compared the preparation methods of the boron- and carbon-based catalysts and their characterization, their performance in the ODH of light alkanes, and the mechanistic issues of the ODH including the identification of the possible active sites and the exploration of the underlying mechanisms. We discussed different boron-based materials and established versatile methodologies for the investigation of active sites and reaction mechanisms. We also elaborated on the similarities and differences in catalytic and kinetic behaviors, and reaction mechanisms between boron- and carbon-based metal-free materials. A perspective of the potential issues of metal-free ODH catalytic systems in terms of their rational design and their synergy with reactor engineering was sketched.

Structure Determination of Boron-Based Oxidative Dehydrogenation Heterogeneous Catalysts with Ultra-High Field 35.2 T 11B Solid-State NMR Spectroscopy

Boron-based heterogenous catalysts, such as hexagonal boron nitride (h-BN) as well as supported boron oxides, are highly selective catalysts for the oxidative dehydrogenation (ODH) of light alkanes to olefins. Previous catalytic measurements and molecular characterization of boron-based catalysts by ¹¹B solid-state NMR spectroscopy and other techniques suggests that oxidized/hydrolyzed boron clusters are the catalytically active sites for ODH. However, ¹¹B solid-state NMR spectroscopy often suffers from limited resolution because boron-11 is an I = 3/2 half-integer quadrupolar nucleus. Here, ultra-high magnetic field (B ₀ = 35.2 T) is used to enhance the resolution of ¹¹B solid-state NMR spectra and unambiguously determine the local structure and connectivity of boron species in h-BN nanotubes used as a ODH catalyst (spent h-BNNT), boron substituted MCM-22 zeolite [B-MWW] and silica supported boron oxide [B/SiO₂] before and after use as an ODH catalyst. One-dimensional direct excitation ¹¹B NMR spectra recorded at B ₀ = 35.2 T are near isotropic in nature, allowing for the easy identification of all boron species. Two-dimensional ¹H-¹¹B heteronuclear correlation NMR spectra aid in the identification of boron species with B-OH functionality. Most importantly, 2D ¹¹B dipolar double-quantum single-quantum homonuclear correlation NMR experiments were used to unambiguously probe boron-boron connectivity within all heterogeneous catalysts. These experiments are practically infeasible at lower, more conventional magnetic fields due to a lack of resolution and reduced NMR sensitivity. The detailed molecular structures determined for the amorphous oxidized/hydrolyzed boron layers on these heterogenous catalysts will aid in the future development of next generation ODH catalysts.

Oxidative Dehydrogenation of Propane over Vanadium-Containing Faujasite Zeolite

Oxidative dehydrogenation (ODH) of light alkanes to olefins—in particular, using vanadium-based catalysts—is a promising alternative to the dehydrogenation process. Here, we investigate how the activity of the vanadium phase in ODH is related to its dispersion in porous matrices. An attempt was made to synthesize catalysts in which vanadium was deposited on a microporous faujasite zeolite (FAU) with the hierarchical (desilicated) FAU as supports. These yielded different catalysts with varying amounts and types of vanadium phase and the porosity of the support. The phase composition of the catalysts was confirmed by X-ray diffraction (XRD); low temperature nitrogen sorption experiments resulted in their surface area and pore volumes, and reducibility was measured with a temperature-programmed reduction with a hydrogen (H₂-TPR) method. The character of vanadium was studied by UV-VIS spectroscopy. The obtained samples were subjected to catalytic tests in the oxidative dehydrogenation of propane in a fixed-bed gas flow reactor with a gas chromatograph to detect subtract and reaction products at a temperature range from 400–500 °C, with varying contact times. The sample containing 6 wt% of vanadium deposited on the desilicated FAU appeared the most active. The activity was ascribed to the presence of the dispersed vanadium ions in the tetragonal coordination environment and support mesoporosity.

B-MWW Zeolite: The Case Against Single-Site Catalysis

Boron-containing materials have recently been identified as highly selective catalysts for the oxidative dehydrogenation (ODH) of alkanes to olefins. It has previously been demonstrated by several spectroscopic characterization techniques that the surface of these boron-containing ODH catalysts oxidize and hydrolyze under reaction conditions, forming an amorphous B₂ (OH)_x O_(3-x/2) (x=0-6) layer. Yet, the precise nature of the active site(s) remains elusive. In this Communication, we provide a detailed characterization of zeolite MCM-22 isomorphously substituted with boron (B-MWW). Using ¹¹ B solid-state NMR spectroscopy, we show that the majority of boron species in B-MWW exist as isolated BO₃ units, fully incorporated into the zeolite framework. However, this material shows no catalytic activity for ODH of propane to propene. The catalytic inactivity of B-MWW for ODH of propane falsifies the hypothesis that site-isolated BO₃ units are the active site in boron-based catalysts. This observation is at odds with other traditionally studied catalysts like vanadium-based catalysts and provides an important piece of the mechanistic puzzle.

Selective Oxidative Cracking of n-Butane to Light Olefins over Hexagonal Boron Nitride with Limited Formation of COx

In recent years, hexagonal boron nitride (hBN) has emerged as an unexpected catalyst for the oxidative dehydrogenation of alkanes. Here, the versatility of hBN was extended to alkane oxidative cracking chemistry by investigating the production of ethylene and propylene from n-butane. Cracking selectivity was primarily controlled by the ratio of n-butane to O₂ within the reactant feed. Under O₂ -lean conditions, increasing temperature led to increased selectivity to ethylene and propylene and decreased selectivity to CO_x . In addition to surface-mediated chemistry, homogeneous gas-phase reactions likely contributed to the observed product distribution, and a reaction mechanism was proposed based on these observations. The catalyst showed good stability under oxidative cracking conditions for 100 h time-on-stream while maintaining high selectivity to ethylene and propylene.

DFT studies on the reaction mechanism for the selective oxidative dehydrogenation of light alkanes by BN catalysts

The oxidative dehydrogenation (ODH) reaction mechanism of ethane and propane catalyzed by two kinds of oxygen-species-terminated BN materials, namely BN nanotubes and h-BN, was studied by the B3LYP-D3 functional with the 6-31G(d,p) basis set.

Hydrogen Arrangements on Defective Quasi-Molecular BN Fragments

Considering the ever-increasing interest in metal-free materials, some potential chemical applications of quasi-molecular boron nitride (BN) derivatives were tested. Specifically, the behavior of BN fragments was analyzed when given defects, producing local electron density changes, were introduced by using topological engineering approaches. The inserted structural faults were Schottky-like divacancy (BN-d) defects, assembled in the fragment frame by the subtraction of one pair of B and N atoms or Stone-Wales (SW) defects. This study is aimed at highlighting the role of these important classes of defects in BN materials hypothesizing their future use in H₂-based processes, related to either (i) H₂ activation or (ii) H₂ production, from preadsorbed hydrogenated molecular species on BN sites. Here, it has been observed that BN species, embodying SW defects, are characterized by endothermic H₂ adsorption and fragmentation phenomena in order to guess their potential use in processes based on the transformation or production of hydrogen. On the contrary, in the presence of BN-d defects, and for reasons strictly related to local structural changes occurring along with the hydrogen rearrangements on the defective BN fragments, a possible use can be inferred. Precautions must be however taken to decrease the material rigidity that could actually decrease the ability of the BN fragment to flatten. This conversely seems to be a necessary requirement to have strong exothermic effects, following the rearrangements of the H₂ molecules.

Porous Boron Nitride Materials: Influence of Structure, Chemistry and Stability on the Adsorption of Organics

Porous boron nitride (BN) is structurally analogous to activated carbon. This material is gaining increasing attention for its potential in a range of adsorption and chemical separation applications, with a number of recent proof-of-concept studies on the removal of organics from water. Today though, the properties of porous BN-i.e., surface area, pore network, chemistry-that dictate adsorption of specific organics remain vastly unknown. Yet, they will need to be optimized to realize the full potential of the material in the envisioned applications. Here, a selection of porous BN materials with varied pore structures and chemistries were studied for the adsorption of different organic molecules, either directly, through vapor sorption analyses or as part of a water/organic mixture in the liquid phase. These separations are relevant to the industrial and environmental sectors and are envisioned to take advantage of the hydrophobic character of the BN sheets. The materials were tested and regenerated and their physical and chemical features were characterized before and after testing. This study allowed identifying the adsorption mechanisms, assessing the performance of porous BN compared to benchmarks in the field and outlining ways to improve the adsorption performance further.

Propane oxidative dehydrogenation over highly selective hexagonal boron nitride catalysts: The role of oxidative coupling of methyl

Hexagonal boron nitride (h-BN) catalyst has recently been reported to be highly selective in oxidative dehydrogenation of propane (ODHP) for olefin production. In addition to propene, ethylene also forms with much higher overall selectivities to C2-products than to C1-products. In this work, we report that the reaction pathways over the h-BN catalyst are different from the V-based catalysts in ODHP. Oxidative coupling reaction of methyl, an intermediate from the cleavage of C─C bond of propane, contributes to the high selectivities to C2-products, leading to more C2-products than C1-products over the h-BN catalyst. This work not only provides insight into the reaction mechanisms involved in ODHP over the boron-based catalysts but also sheds light on the selective oxidation of alkanes such as direct upgrading of methane via oxidative upgrading to ethylene or CH _x O _y on boron-based catalysts.

Escaping undesired gas-phase chemistry: Microwave-driven selectivity enhancement in heterogeneous catalytic reactors

Research in solid-gas heterogeneous catalytic processes is typically aimed toward optimization of catalyst composition to achieve a higher conversion and, especially, a higher selectivity. However, even with the most selective catalysts, an upper limit is found: Above a certain temperature, gas-phase reactions become important and their effects cannot be neglected. Here, we apply a microwave field to a catalyst-support ensemble capable of direct microwave heating (MWH). We have taken extra precautions to ensure that (i) the solid phase is free from significant hot spots and (ii) an accurate estimation of both solid and gas temperatures is obtained. MWH allows operating with a catalyst that is significantly hotter than the surrounding gas, achieving a high conversion on the catalyst while reducing undesired homogeneous reactions. We demonstrate the concept with the CO₂-mediated oxidative dehydrogenation of isobutane, but it can be applied to any system with significant undesired homogeneous contributions.

Serendipity in Catalysis Research: Boron-Based Materials for Alkane Oxidative Dehydrogenation

Light olefins such as ethylene and propylene form the foundation of the modern chemical industry, with yearly production volumes well into the hundreds of millions of metric tons. Currently, these light olefins are mainly produced via energy-intensive steam cracking. Alternatively, oxidative dehydrogenation (ODH) of light alkanes to produce olefins allows for lower operation temperatures and extended catalyst lifetimes, potentially leading to valuable process efficiencies. The potential benefits of this route have led to significant research interest due to the wide availability of natural gas from shale deposits. Advances in this area have still not yielded catalysts that are sufficiently selective to olefins for industrial implementation, and ODH still remains a holy grail of selective alkane oxidation research. The main challenge in selective oxidation lies in preventing the overoxidation of the desired product, such as propylene during propane oxidation, to CO and CO₂. Research into selective heterogeneous catalysts for the oxidative dehydrogenation of propane has led to the extensive use of vanadium oxide-based catalysts, and studies on the surface mechanism involved have been used to improve the catalytic activity of the material. Despite decades of research, however, selectivity toward propylene has not proven satisfactory at industrially relevant conversions. It is imperative for new catalytic systems that minimize product overoxidation to be developed for future applications of oxidative dehydrogenation processes. While rational catalyst design has been successful in developing homogeneous catalyst systems, its practical use in heterogeneous catalyst development remains modest. The complexity of surfaces with a variety of terminations and bulk structures, let alone their modification by the chemical potential of a reaction mixture, makes heterogeneous catalyst discovery serendipitous in many cases. The catalyst family presented in this Account is no exception. The importance of catalysis research lies in exploring the science behind serendipity. In this Account, we will first present our initial discovery of boron nitride (BN) as an unexpected catalyst for the oxidative dehydrogenation of light alkanes. Beyond its surprising activity, BN also drew interest due to its low selectivity to carbon oxides. This observation made BN distinct from previously studied metal oxide catalysts for selective alkane oxidation. We narrowed down its unique reactivity to the oxygen functionalization of the catalyst surface, particularly the formation of B-O species as probed by various spectroscopic techniques. In investigating the critical role of each of the structural elements during ODH, we discovered that not only BN but an entire class of boron-containing compounds are active and selective for the formation of propylene from propane. All these materials form a complex oxidized surface with a distribution of BO _x surface sites. This discovery opens the doors to a new field of boron-based oxidation chemistry that currently has more questions than answers. We aim to make this Account a starting point for the research community to explore these new materials to understand their surface mechanisms and the surface species that offer a unique selectivity toward olefinic products. Effective use of these materials may lead to novel processes for efficient use of abundant light alkane resources by oxidation chemistry.

Hybrid Mo-C T Nanowires as Highly Efficient Catalysts for Direct Dehydrogenation of Isobutane

Direct dehydrogenation of isobutane to isobutene has drawn extensive attention for synthesizing various chemicals. The Mo-based catalysts hold promise as an alternative to the toxic CrO _x- and scarce Pt-based catalysts. However, the low activity and rapid deactivation of the Mo-based catalysts greatly hinder their practical applications. Herein, we demonstrate a feasible approach toward the development of efficient and non-noble metal dehydrogenation catalysts based on Mo-C _T hybrid nanowires calcined at different temperatures. In particular, the optimal Mo-C₇₀₀ catalyst exhibits isobutane consumption rate of 3.9 mmol g^-1 h^-1 and isobutene selectivity of 73% with production rate of 2.8 mmol g^-1 h^-1. The catalyst maintained 90% of its initial activity after 50 h of reaction. Extensive characterizations reveal that such prominent performance is well correlated with the adsorption abilities of isobutane and isobutene and the formation of η-MoC species. In contrast, the generation of β-Mo₂C crystalline phase during long-term reaction causes minor decline in activity. Compared to MoO₂ and β-Mo₂C, η-MoC plays a role more likely in suppressing the cracking reaction. This work demonstrates a feasible approach toward the development of efficient and non-noble metal dehydrogenation catalysts.

Methane activation over a boron nitride catalyst driven by in situ formed molecular water

Boron nitride converts methane to valuable chemicals through a H₂O-assisted O₂ and CH₄ synergetic mutual activation mechanism.

Progress in selective oxidative dehydrogenation of light alkanes to olefins promoted by boron nitride catalysts

We highlight recent progress on a newly-developed catalyst system, boron nitride, for selective oxidative dehydrogenation of light alkanes.