Reduction Polymerization of CO2 with Phenylene Silanes Catalyzed by Single Component B(C6F5)3

CO2 is an abundant C1 resource but a green-house gas and chemically inert. Thus, its utilization has been a promising but challenging project. Herein, we report the unprecedented polymerization of CO2 and C6H4(SiMe2H)2 using B(C6F5)3 alone under mild conditions to give poly(silphenylene siloxane) accompanied by releasing CH4. The copolymerization can be extended to comonomers of phenylene silanes bearing functional groups. Moreover, it combines with Piers-Rubinsztajn reaction to establish a tandem polymerization system to achieve super thermal resistant poly(siloxane-co-silphenylene siloxane)s. Density functional theory reveals that B(C6F5)3 is activated by silanes to form free HB(C6F5)2, which is the true active species for CO2 reducing to borylformate, the rate controlling step of the polymerization procedure. The subsequent multiple reductions of borylformate to CH4 and the step-growth to poly(silphenylene siloxane)s can be fulfilled by both B(C6F5)3 and HB(C6F5)2, and the former shows a slightly higher activity. This work opens a new avenue of utilizing CO2 to fabricate polysiloxanes that is unable to access using current manners.

Concatenating Microbial, Enzymatic, and Organometallic Catalysis for Integrated Conversion of Renewable Carbon Sources

The chemical industry can now seize the opportunity to improve the sustainability of its processes by replacing fossil carbon sources with renewable alternatives such as CO2, biomass, and plastics, thereby thinking ahead and having a look into the future. For their conversion to intermediate and final products, different types of catalysts-microbial, enzymatic, and organometallic-can be applied. The first part of this review shows how these catalysts can work separately in parallel, each route with unique requirements and advantages. While the different types of catalysts are often seen as competitive approaches, an increasing number of examples highlight, how combinations and concatenations of catalysts of the complete spectrum can open new roads to new products. Therefore, the second part focuses on the different catalysts either in one-step, one-pot transformations or in reaction cascades. In the former, the reaction conditions must be conflated but purification steps are minimized. In the latter, each catalyst can work under optimal conditions and the "hand-over points" should be chosen according to defined criteria like minimal energy usage during separation procedures. The examples are discussed in the context of the contributions of catalysis to the envisaged (bio)economy.

Four-electron reduction of CO2: from formaldehyde and acetal synthesis to complex transformations

The expansive and dynamic field of the CO2 Reduction Reaction (CO2RR) seeks to harness CO2 as a sustainable carbon source or energy carrier. While significant progress has been made in two, six, and eight-electron reductions of CO2, the four-electron reduction remains understudied. This review fills this gap, comprehensively exploring CO2 reduction into formaldehyde (HCHO) or acetal-type compounds (EOCH2OE, with E = [Si], [B], [Zr], [U], [Y], [Nb], [Ta] or -R) using various CO2RR systems. These encompass (photo)electro-, bio-, and thermal reduction processes with diverse reductants. Formaldehyde, a versatile C1 product, is challenging to synthesize and isolate from the CO2RR. The review also discusses acetal compounds, emphasizing their significance as pathways to formaldehyde with distinct reactivity. Providing an overview of the state of four-electron CO2 reduction, this review highlights achievements, challenges, and the potential of the produced compounds - formaldehyde and acetals - as sustainable sources for valuable product synthesis, including chiral compounds.

Accessing Functionalized Ultra-High Molecular Weight Poly(α-olefin)s via Hafnium-Mediated Highly Isospecific Copolymerization

Inspired by the favorable impact of heteroatom-containing groups in phenoxy-imine titanium and late transition metal catalysts, a series of novel pyridylamido hafnium catalysts bearing ─OMe (Cat-OMe), ─CF3 (Cat-CF3), and ─C6F5 (Cat-C6F5) substituents are designed and synthesized. Together with the established hafnium catalysts Cat-H and Cat-iPr by Dow/Symyx, these catalysts are applied in the polymerization of α-olefins, including 1-hexene, 1-octene, and 4M1P, as well as in the copolymerization of these α-olefins with a specifically designed polar monomer. The enhancement of polymer molecular weight derived from catalyst modification and the incorporation of polar monomers is discussed in detail. Notably, the new catalysts are all highly active for α-olefins polymerization, with catalyst Cat-CF3 producing isotactic polymers with the highest molecular weight (Mw = 1649 kg mol-1); in copolymerization with polar monomers, catalyst Cat-OMe yields isotactic copolymer with the highest molecular weight (Mw = 2990 kg mol-1). Interestingly, catalyst Cat-C6F5 bearing a ─C6F5 group in the N-aryl moiety gives rise to poly(α-olefin) with reduced stereoselectivity. The findings of this study underscore the potential of heteroatom-containing groups in the development of early transition metal catalysts and the synthesis of polymer with novel structures.

Mechanism Insights into the Iridium(III)- and B(C6F5)3-Catalyzed Reduction of CO2 to the Formaldehyde Level with Tertiary Silanes

The catalytic system [Ir(CF3CO2)(κ2-NSiMe)2] [1; NSiMe = (4-methylpyridin-2-yloxy)dimethylsilyl]/B(C6F5)3 promotes the selective reduction of CO2 with tertiary silanes to the corresponding bis(silyl)acetal. Stoichiometric and catalytic studies evidenced that species [Ir(CF3COO-B(C6F5)3)(κ2-NSiMe)2] (3), [Ir(κ2-NSiMe)2][HB(C6F5)3] (4), and [Ir(HCOO-B(C6F5)3)(κ2-NSiMe)2] (5) are intermediates of the catalytic process. The structure of 3 has been determined by X-ray diffraction methods. Theoretical calculations show that the rate-limiting step for the 1/B(C6F5)3-catalyzed hydrosilylation of CO2 to bis(silyl)acetal is a boron-promoted Si-H bond cleavage via an iridium silylacetal borane adduct.

Homogeneous Catalysis for Sustainable Energy: Hydrogen and Methanol Economies, Fuels from Biomass, and Related Topics

As the world pledges to significantly cut carbon emissions, the demand for sustainable and clean energy has now become more important than ever. This includes both production and storage of energy carriers, a majority of which involve catalytic reactions. This article reviews recent developments of homogeneous catalysts in emerging applications of sustainable energy. The most important focus has been on hydrogen storage as several efficient homogeneous catalysts have been reported recently for (de)hydrogenative transformations promising to the hydrogen economy. Another direction that has been extensively covered in this review is that of the methanol economy. Homogeneous catalysts investigated for the production of methanol from CO2, CO, and HCOOH have been discussed in detail. Moreover, catalytic processes for the production of conventional fuels (higher alkanes such as diesel, wax) from biomass or lower alkanes have also been discussed. A section has also been dedicated to the production of ethylene glycol from CO and H2 using homogeneous catalysts. Well-defined transition metal complexes, in particular, pincer complexes, have been discussed in more detail due to their high activity and well-studied mechanisms.

Recent Advances in Chemistry of Unsymmetrical Phosphorus-Based Pincer Nickel Complexes: From Design to Catalytic Applications

Pincer complexes play an important role in organometallic chemistry; in particular, their use as homogeneous catalysts for organic transformations has increased dramatically in recent years. The high catalytic activity of such bis-cyclometallic complexes is associated with the easy tunability of their properties. Moreover, the phosphorus-based unsymmetrical pincers showed higher catalytic activity than the corresponding symmetrical analogues in several catalytic reactions. However, in modern literature, an increasing interest in the development of catalysts based on non-precious metals is observed. For example, nickel, which is an affordable and sustainable analogue of platinum and palladium, known for its low toxicity, has attracted increasing attention in the catalytic chemistry of transition metals in recent years. Thus, this mini-review is devoted to the recent advances in the chemistry of unsymmetrical phosphorus-based pincer nickel complexes, including the ligand design, the synthesis of nickel complexes and their catalytic applications.

Hydrosilylative reduction of carbon dioxide by a homoleptic lanthanum aryloxide catalyst with high activity and selectivity

An efficient tandem hydrosilylation of CO2, which uses a combination of a simple, homoleptic lanthanum aryloxide and B(C6F5)3, was performed. Use of a less sterically hindered silane led to an exclusive reduction of CO2 to CH4, with a turnover frequency of up to 6000 h-1 at room temperature. The catalytic system is robust, and 19 400 turnovers could be achieved with 0.005 mol% loading of lanthanum. The reaction outcome depended highly on the nature of the silane reductant used. Selective production of the formaldehyde equivalent, i.e., bis(silyl)acetal, without over-reduction, was observed when a sterically bulky silane was used. The reaction mechanism was elucidated by stoichiometric reactions and DFT calculations.

More Than Just a Reagent: The Rise of Renewable Organohydrides for Catalytic Reduction of Carbon Dioxide

Stoichiometric carbon dioxide reduction to highly reduced C1 molecules, such as formic acid (2e^- ), formaldehyde (4e^- ), methanol (6e^- ) or even most-reduced methane (8e^- ), has been successfully achieved by using organosilanes, organoboranes, and frustrated Lewis Pairs (FLPs) in the presence of suitable catalyst. The development of renewable organohydride compounds could be the best alternative in this regard as they have shown promise for the transfer of hydride directly to CO₂ . Reduction of CO₂ by two electrons and two protons to afford formic acid by using renewable organohydride molecules has recently been investigated by various groups. However, catalytic CO₂ reduction to ≥2e^- -reduced products by using renewable organohydride-based molecules has rarely been explored. This Minireview summarizes important findings in this regard, encompassing both stoichiometric and catalytic CO₂ reduction.

Partnering a Three-Coordinate Gallium Cation with a Hydroborate Counter-Ion for the Catalytic Hydrosilylation of CO2

A novel β-diketiminate stabilized gallium hydride, (^Dipp L)Ga(Ad)H (where (^Dipp L)={HC(MeCDippN)₂ }, Dipp=2,6-diisopropylphenyl and Ad=1-adamantyl), has been synthesized and shown to undergo insertion of carbon dioxide into the Ga-H bond under mild conditions. In this case, treatment of the resulting κ¹ -formate complex with triethylsilane does not lead to regeneration of the hydride precursor. However, when combined with B(C₆ F₅ )₃ , (^Dipp L)Ga(Ad)H catalyses the reductive hydrosilylation of CO₂ . Under stoichiometric conditions, the addition of one equivalent of B(C₆ F₅ )₃ to (^Dipp L)Ga(Ad)H leads to the formation of a 3-coordinate cationic gallane complex, partnered with a hydroborate anion, [(^Dipp L)Ga(Ad)][HB(C₆ F₅ )₃ ]. This complex rapidly hydrometallates carbon dioxide and catalyses the selective reduction of CO₂ to the formaldehyde oxidation level at 60 °C in the presence of Et₃ SiH (yielding H₂ C(OSiEt₃ )₂ ). When catalysis is undertaken in the presence of excess B(C₆ F₅ )₃ , appreciable enhancement of activity is observed, with a corresponding reduction in selectivity: the product distribution includes H₂ C(OSiEt₃ )₂ , CH₄ and O(SiEt₃ )₂ . While this system represents proof-of-concept in CO₂ hydrosilylation by a gallium hydride system, the TOF values obtained are relatively modest (max. 10 h^-1 ). This is attributed to the strength of binding of the formatoborate anion to the gallium centre in the catalytic intermediate (^Dipp L)Ga(Ad){OC(H)OB(C₆ F₅ )₃ }, and the correspondingly slow rate of the turnover-limiting hydrosilylation step. In turn, this strength of binding can be related to the relatively high Lewis acidity measured for the [(^Dipp L)Ga(Ad)]⁺ cation (AN=69.8).

Rollover Cyclometalation as a Valuable Tool for Regioselective C-H Bond Activation and Functionalization

Rollover cyclometalation constitutes a particular case of cyclometallation reaction. This reaction occurs when a chelated heterocyclic ligand loses its bidentate coordination mode and undergoes an internal rotation, after which a remote C-H bond is regioselectively activated, affording an uncommon cyclometalated complex, called "rollover cyclometalated complex". The key of the process is the internal rotation of the ligand, which occurs before the C-H bond activation and releases from coordination a donor atom. The new "rollover" ligand has peculiar properties, being a ligand with multiple personalities, no more a spectator in the reactivity of the complex. The main reason of this peculiarity is the presence of an uncoordinated donor atom (the one initially involved in the chelation), able to promote a series of reactions not available for classic cyclometalated complexes. The rollover reaction is highly regioselective, because the activated C-H bond is usually in a symmetric position with respect to the donor atom which detaches from the metal stating the rollover process. Due to this novel behavior, a series of potential applications have appeared in the literature, in fields such as catalysis, organic synthesis, and advanced materials.

Dichotomous Si-H Bond Activation by Alkoxide and Alcohol in Base-Catalyzed Dehydrocoupling of Silanes

The activation of silanes in dehydrogenative coupling with alcohols under general base catalysis was studied experimentally (using multinuclear NMR, IR, and UV-visible spectroscopies) and computationally (at DFT M06/6-311++G(d,p) theory level) on the example of Ph_4-nSiH_n (n = 1-3) interaction with (CF₃)₂CHOH in the presence of Et₃N. The effect of the phenyl groups' number and H^- substitution by the electron-withdrawing (CF₃)₂CHO^- group on Si-H bond hydricity (quantified as hydride-donating ability, HDA) and Lewis acidity of silicon atom (characterized by maxima of molecular electrostatic potential) was accessed. Our results show the coordination of Lewis base (Y = Me₃N, ROH, OR^-) leads to the increased hydricity of pentacoordinate hypervalent Ph_4-nSi(Y)H_n complexes and a decrease of the reaction barrier for H₂ release. The formation of tertiary complexes [Ph_4-nSi(Y)H_n]···HOR is a critical prerequisite for the dehydrocoupling with alkoxides being ideal activators. The latter can be external or internal, generated by in situ HOR deprotonation. The mutual effect of tetrel interaction and dihydrogen bonding in tertiary complexes (RO^-)Ph_4-nSiH_n···HOR leads to dichotomous activation of Si-H bond promoting the proton-hydride transfer and H₂ release.

Bis(alkyl) scandium and yttrium complexes coordinated by an amidopyridinate ligand: synthesis, characterization and catalytic performance in isoprene polymerization, hydroelementation and carbon dioxide hydrosilylation

Highly versatile and robust organolanthanides as catalysts or catalyst precursors for a variety of challenging transformations.

Diverse Catalytic Systems and Mechanistic Pathways for Hydrosilylative Reduction of CO2

Catalytic hydrosilylation of carbon dioxide has emerged as a promising approach for carbon dioxide utilization. It allows the reductive transformation of carbon dioxide into value-added products at the levels of formate, formaldehyde, methanol, and methane. Tremendous progress has been made in the area of carbon dioxide hydrosilylation since the first reports in 1981. This focus review describes recent advances in the design and catalytic performance of leading catalyst systems, including transition-metal, main-group, and transition-metal/main-group and main-group/main-group tandem catalysts. Emphasis is placed on discussions of key mechanistic features of these systems and efforts towards the development of more selective, efficient, and sustainable carbon dioxide hydrosilylation processes.