Electrocatalytic ORR-coupled ammoximation for efficient oxime synthesis

State-of-the-art technology for cyclohexanone oxime production typically demands elevated temperature and pressure, along with the utilization of expensive hydroxylamine sulfate or oxidants. Here, we propose an electrochemistry-assisted cascade strategy for the efficient cyclohexanone ammoximation under ambient conditions by using in situ cathode-generated green oxidants of reactive oxygen species (ROS) such as OOH* and H2O2. This electrochemical reaction can take place at the cathode, achieving over 95% yield, 99% selectivity of cyclohexanone oxime, and an electron-to-oxime (ETO) efficiency of 96%. Mechanistic analysis reveals that, in addition to the direct ammoximation by in situ-generated OOH* by electrocatalytic ORR, Ti-MOR also play a major role in capturing OOH* directly and converting the in situ-generated H2O2 to OOH*, thus accelerating the ORR-coupled cascade production of cyclohexanone oxime. This work paves a mild, economical, and sustainable energy-efficient electrocatalytic route for the oxime production using oxygen, ammonium bicarbonate, and cyclohexanone.

Recent advances in electrosynthesis of H2O2via two-electron oxygen reduction reaction

The electrosynthesis of hydrogen peroxide (H2O2) via a selective two-electron oxygen reduction reaction (2e- ORR) presents a green and low-energy-consumption alternative to the traditional, energy-intensive anthraquinone process. This review encapsulates the principles of designing relational electrocatalysts for 2e- ORR and explores remaining setups for large-scale H2O2 production. Initially, the review delineates the fundamental reaction mechanisms of H2O2 production via 2e- ORR and assesses performance. Subsequently, it methodically explores the pivotal influence of microstructures, heteroatom doping, and metal hybridization along with setup configurations in achieving a high-performance catalyst and efficient reactor for H2O2 production. Thereafter, the review introduces a forward-looking methodology that leverages the synergistic integration of catalysts and reactors, aiming to harmonize the complementary characteristics of both components. Finally, it outlines the extant challenges and the promising avenues for the efficient electrochemical production of H2O2, setting the stage for future research endeavors.

Selective Cobalt-Mediated Formation of Hydrogen Peroxide from Water under Mild Conditions via Ligand Redox Non-Innocence

Despite the broad importance of hydrogen peroxide (H2O2) in oxidative transformations, there are comparatively few viable routes for its production. The majority of commercial H2O2 is currently produced by the stepwise reduction of dioxygen (O2) via the anthraquinone process, but direct electrochemical formation from water (H2O) would have several advantages─namely, avoiding flammable gases or stepwise separations. However, the selective oxidation of H2O to form H2O2 over the thermodynamically favored product of O2 is a difficult synthetic challenge. Here, we present a molecular H2O oxidation system with excellent selectivity for H2O2 that functions both stoichiometrically and catalytically. We observe high efficiency for electrocatalytic H2O2 production at low overpotential with no O2 observed under any conditions. Mechanistic studies with both calculations and kinetic analyses from isolated intermediates suggest that H2O2 formation occurs in a bimolecular fashion via a dinuclear H2O2-bridged intermediate with an important role for a redox non-innocent ligand. This system showcases the ability of metal-ligand cooperativity and strategic design of the secondary coordination sphere to promote kinetically and thermodynamically challenging selectivity in oxidative catalysis.

Heterogeneous H2O2-based selective oxidations over zirconium tungstate α-ZrW2O8

Catalytic properties of a crystalline zirconium tungstate, ZrW2O8, the material known mainly for its isotropic negative coefficient of thermal expansion, have been assessed for the liquid-phase selective oxidation of a range of organic substrates comprising CC, OH, S and other functional groups using aqueous hydrogen peroxide as the green oxidant. Samples of ZrW2O8 were prepared by hydrothermal synthesis and characterised by N2 adsorption, PXRD, SEM, EDX, FTIR and Raman spectroscopic techniques. Studies by IR spectroscopy of adsorbed probe molecules (CO and CDCl3) revealed the presence of Brønsted acidic and basic sites on the surface of ZrW2O8. It was demonstrated that ZrW2O8 is able to activate H2O2 under mild conditions and accomplish the epoxidation of CC bonds in alkenes and unsaturated ketones, oxidation of thioethers to sulfoxides and sulfones, along with the oxidation of alcoholic functions to produce ketones and aldehydes. The oxidation of tetramethylethylene and α-terpinene over ZrW2O8 revealed the formation of peroxidation products, 2,3-dimethyl-3-butene-2-hydroperoxide and endoperoxide ascaridole, respectively, indicating the involvement of singlet oxygen in the oxidation process. The ZrW2O8 catalyst preserves its structure and morphology under the turnover conditions and does not suffer from metal leaching. It can be easily recovered, regenerated by calcination, and reused without the loss of activity and selectivity.

N-Doped porous carbons obtained from chitosan and spent coffee as electrocatalysts with tuneable oxygen reduction reaction selectivity for H2O2 generation

Nitrogen-containing porous carbons prepared by the pyrolysis of adequate biopolymer-based precursors have shown potential in several electrochemical energy-related applications. However, it is still of crucial interest to find the optimal precursors and process conditions which would allow the preparation of carbons with adequate porous structure as well as suitable nitrogen content and distribution of functional groups. In the present work we suggested a straightforward approach to prepare N-doped porous carbons by direct pyrolysis under nitrogen of chitosan : coffee blends of different compositions and using KOH for simultaneous surface activation. The synthetized carbon materials were tested for the electrochemical oxygen reduction to hydrogen peroxide (H₂O₂). A higher fraction of chitosan in the precursor led to a decrease in meso- and nano-porosity of the formed porous carbons, while their activity towards H₂O₂ generation increased. The nitrogen species derived from chitosan seem to play a very important role. Out of the synthesized catalysts the one with the largest content of pyridinic nitrogen sites exhibited the highest faradaic efficiency. The faradaic efficiencies and current densities of the synthesized materials were comparable with the ones of other commercially available carbons obtained from less renewable precursors.

Electrocatalytic transformation of oxygen to hydroxyl radicals via three-electron pathway using nitrogen-doped carbon nanotube-encapsulated nickel nanocatalysts for effective organic decontamination

The selective electrochemical reduction of oxygen (O₂) via 3e^- pathway for the production of hydroxyl radicals (HO) is a promising alternative to conventional electro-Fenton process. Here, we developed a nitrogen-doped CNT-encapsulated Ni nanoparticle electrocatalyst (Ni@N-CNT) with high O₂ reduction selectivity for the generation of HO^•via 3e^- pathway. Exposed graphitized N on the CNT shell, and Ni nanoparticles encapsulated within the tip of the N-CNT, played a key role in the generation of H₂O₂ intermediate (*HOOH) via a 2e^- oxygen reduction reaction. Meanwhile, those encapsulated Ni nanoparticles at the tip of the N-CNT facilitated the sequential HO^• generation by directly decomposing the electrogenerated *H₂O₂ in a 1e^- reduction reaction on the N-CNT shell without inducing Fenton reaction. Improved bisphenol A (BPA) degradation efficiency were observed when compared with conventional batch system (97.5% vs 66.4%). Trials using Ni@N-CNT in a flow-through configuration demonstrated a complete removal of BPA within 30 min (k = 0.12 min^-1) with a limited energy consumption of 0.068 kW·h·g^-1 TOC.

Photocatalytic Synthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Hydrogen peroxide is a powerful and green oxidant that allows for the oxidation of a wide span of organic and inorganic substrates in liquid media under mild reaction conditions, and forms only molecular water and oxygen as end products. Hydrogen peroxide is therefore used in a wide range of applications, for which the well-documented and established anthraquinone autoxidation process is by far the dominating production method at the industrial scale. As this method is highly energy consuming and environmentally costly, the search for more sustainable synthesis methods is of high interest. To this end, the article reviews the basis and the recent development of the photocatalytic synthesis of hydrogen peroxide. Different oxygen reduction and water oxidation mechanisms are discussed, as well as several kinetic models, and the influence of the main key reaction parameters is itemized. A large range of photocatalytic materials is reviewed, with emphasis on titania-based photocatalysts and on high-prospect graphitic carbon nitride-based systems that take advantage of advanced bulk and surface synthetic approaches. Strategies for enhancing the performances of solar-driven photocatalysts are reported, and the search for new, alternative, photocatalytic materials is detailed. Finally, the promise of in situ photocatalytic synthesis of hydrogen peroxide for water treatment and organic synthesis is described, as well as its coupling with enzymes and the direct in situ synthesis of other technical peroxides.

Pd-Sn Alloy Catalysts for Direct Synthesis of Hydrogen Peroxide from H2 and O2 in a Microchannel Reactor

Direct synthesis of hydrogen peroxide (DSHP) from H₂ and O₂ offers a promising alternative to the present commercial anthraquinone method, but it still faces the challenges of low H₂O₂ productivity, low stability of catalysts, and high risk of explosion. Herein, by loading in a microchannel reactor, the as-synthesized Pd-Sn alloy materials exhibit high catalytic activity for H₂O₂ production, presenting a H₂O₂ productivity of 3124 g kg_Pd^-1 h^-1. The doped Sn atoms on the surface of Pd not only facilitate the release of H₂O₂ but also effectively slow down the deactivation of catalysts. Theoretical calculations demonstrate that the Pd-Sn alloy surface has the property of antihydrogen poisoning, showing higher activity and stability than pure Pd catalysts. The deactivation mechanism of the catalyst was elucidated, and the online reactivation method was developed. In addition, we show that the long-life Pd-Sn alloy catalyst can be achieved by supplying an intermittent flow of hydrogen gas. This work provides guidance on how to prepare high performance and stable Pd-Sn alloy catalysts for the continuous and direct synthesis of H₂O₂.

Alkali-assisted engineering of ultrathin graphite phase carbon nitride nanosheets with carbon vacancy and cyano group for significantly promoting photocatalytic hydrogen peroxide generation under visible light: fast electron transfer channel

Exfoliating bulk graphite phase carbon nitride (g-C₃N₄) into 2D nanosheets is considered to be an effective method to enhance its photocatalytic activity. However, optical absorption capacity of the exfoliated g-C₃N₄ nanosheets are lower than that of the original bulk g-C₃N₄ due to the quantum size effect. Here, the ultrathin graphite phase carbon nitride nanosheets containing both carbon vacancy and cyano group (UCNS₅₈₀) were prepared by two-step calcination in air with the assistance of KOH. The formation and position of carbon vacancy and cyano group were first investigated and determined. The simultaneous introduction of carbon vacancy and cyano group not only improved light absorption range and intensity of g-C₃N₄ nanosheets, but also more importantly constructed a fast transfer channel for photogenerated electrons, further enhancing the separation efficiency and migration ability of photogenerated carriers. The cyano group as the accumulation center of photogenerated electrons and the oxygen adsorption center increased the proportion of one-step two-electrons reaction path to efficiently generate H₂O₂. As a result, UCNS₅₈₀ exhibited highly boosted H₂O₂ generation activity, its H₂O₂ production yield for 6 h reached 939 µmol/L and the formation rate was up to 4167 µM h^-1 g^-1, which was in priority in the reported literature under the same conditions.

Photocatalytic and Electrocatalytic Generation of Hydrogen Peroxide: Principles, Catalyst Design and Performance

Hydrogen peroxide (H2O2) is a high-demand organic chemical reagent and has been widely used in various modern industrial applications. Currently, the prominent method for the preparation of H2O2 is the anthraquinone oxidation. Unfortunately, it is not conducive to economic and sustainable development since it is a complex process and involves unfriendly environment and potential hazards. In this context, numerous approaches have been developed to synthesize H2O2. Among them, photo/electro-catalytic ones are considered as two of the most promising manners for on-site synthesis of H2O2. These alternatives are sustainable in that only water or O2 is required. Namely, water oxidation (WOR) or oxygen reduction (ORR) reactions can be further coupled with clean and sustainable energy. For photo/electro-catalytic reactions for H2O2 generation, the design of the catalysts is extremely important and has been extensively conducted with an aim to obtain ultimate catalytic performance. This article overviews the basic principles of WOR and ORR, followed by the summary of recent progresses and achievements on the design and performance of various photo/electro-catalysts for H2O2 generation. The related mechanisms for these approaches are highlighted from theoretical and experimental aspects. Scientific challenges and opportunities of engineering photo/electro-catalysts for H2O2 generation are also outlined and discussed.

Co-based Catalysts for Selective H2 O2 Electroproduction via 2-electron Oxygen Reduction Reaction

Electrochemical production of hydrogen peroxide (H₂ O₂ ) via two-electron oxygen reduction reaction (ORR) process is emerging as a promising alternative method to the conventional anthraquinone process. To realize high-efficiency H₂ O₂ electrosynthesis, robust and low cost electrocatalysts have been intensively pursued, among which Co-based catalysts attract particular research interests due to the earth-abundance and high selectivity. Here, we provide a comprehensive review on the advancement of Co-based electrocatalyst for H₂ O₂ electroproduction. The fundamental chemistry of 2-electron ORR is discussed firstly for guiding the rational design of electrocatalysts. Subsequently, the development of Co-based electrocatalysts involving nanoparticles, compounds and single atom catalysts is summarized with the focus on active site identification, structure regulation and mechanism understanding. Moreover, the current challenges and future directions of the Co-based electrocatalysts are briefly summarized in this review.

Safe, One-Pot, Homogeneous Direct Synthesis of H2O2

Hydrogen peroxide is an environmentally friendly oxidizing agent but current synthetic methods are wasteful. This is a result of the high flammability of H₂/O₂ mixtures and/or the requirement for cocatalysts. In this paper, we report the synthesis of H₂O₂ by means of a homogeneous catalyst, which allows a safe, one-pot synthesis in water, using only H₂ and O₂. This catalyst is capable of removing electrons from H₂, storing them for the reduction of O₂, and then permitting the protonation of the reduced oxygen to H₂O₂. The turnover number (TON) is 910 under an H₂/O₂ (95/5) atmosphere (1.9 MPa) for 12 h at 23 °C, which is the highest of any homogeneous catalyst. Furthermore, we propose a reaction mechanism based on two crystal structures.

Methane Oxidation to Methanol

The direct transformation of methane to methanol remains a significant challenge for operation at a larger scale. Central to this challenge is the low reactivity of methane at conditions that can facilitate product recovery. This review discusses the issue through examination of several promising routes to methanol and an evaluation of performance targets that are required to develop the process at scale. We explore the methods currently used, the emergence of active heterogeneous catalysts and their design and reaction mechanisms and provide a critical perspective on future operation. Initial experiments are discussed where identification of gas phase radical chemistry limited further development by this approach. Subsequently, a new class of catalytic materials based on natural systems such as iron or copper containing zeolites were explored at milder conditions. The key issues of these technologies are low methane conversion and often significant overoxidation of products. Despite this, interest remains high in this reaction and the wider appeal of an effective route to key products from C-H activation, particularly with the need to transition to net carbon zero with new routes from renewable methane sources is exciting.

Improving Catalytic Activity towards the Direct Synthesis of H2O2 through Cu Incorporation into AuPd Catalysts

With a focus on catalysts prepared by an excess-chloride wet impregnation procedure and supported on the zeolite ZSM-5(30), the introduction of low concentrations of tertiary base metals, in particular Cu, into supported AuPd nanoparticles can be observed to enhance catalytic activity towards the direct synthesis of H2O2. Indeed the optimal catalyst formulation (1%AuPd(0.975)Cu(0.025)/ZSM-5) is able to achieve rates of H2O2 synthesis (115 molH2O2kgcat−1h−1) approximately 1.7 times that of the bi-metallic analogue (69 molH2O2kgcat−1h−1) and rival that previously reported over comparable materials which use Pt as a dopant. Notably, the introduction of Cu at higher loadings results in an inhibition of performance. Detailed analysis by CO-DRFITS and XPS reveals that the improved performance observed over the optimal catalyst can be attributed to the electronic modification of the Pd species and the formation of domains of a mixed Pd2+/Pd0 oxidation state as well as structural changed within the nanoalloy.

Direct H2O2 Synthesis, without H2 Gas

We report here the direct hydrogenation of O₂ gas to form hydrogen peroxide (H₂O₂) using a membrane reactor without H₂ gas. Hydrogen is sourced from water, and the reactor is driven by electricity. Hydrogenation chemistry is achieved using a hydrogen-permeable Pd foil that separates an electrolysis chamber that generates reactive H atoms, from a hydrogenation chamber where H atoms react with O₂ to form H₂O₂. Our results show that the concentration of H₂O₂ can be increased ∼8 times (from 56.5 to 443 mg/L) by optimizing the ratio of methanol-to-water in the chemical chamber, and through catalyst design. We demonstrate that the concentration of H₂O₂ is acutely sensitive to the H₂O₂ decomposition rate. This decomposition rate can be minimized by using AuPd alloy catalysts instead of pure Pd. This study presents a new pathway to directly synthesize H₂O₂ using water electrolysis without ever using H₂ gas.

Highly efficient catalytic production of oximes from ketones using in situ-generated H2O2

The ammoximation of cyclohexanone using preformed hydrogen peroxide (H₂O₂) is currently applied commercially to produce cyclohexanone oxime, an important feedstock in nylon-6 production. We demonstrate that by using supported gold-palladium (AuPd) alloyed nanoparticles in conjunction with a titanium silicate-1 (TS-1) catalyst, H₂O₂ can be generated in situ as needed, producing cyclohexanone oxime with >95% selectivity, comparable to the current industrial route. The ammoximation of several additional simple ketones is also demonstrated. Our approach eliminates the need to transport and store highly concentrated, stabilized H₂O₂, potentially achieving substantial environmental and economic savings. This approach could form the basis of an alternative route to numerous chemical transformations that are currently dependent on a combination of preformed H₂O₂ and TS-1, while allowing for considerable process intensification.

Impact of the Experimental Parameters on Catalytic Activity When Preparing Polymer Protected Bimetallic Nanoparticle Catalysts on Activated Carbon

Sol immobilization is used to produce bimetallic catalysts with higher activity to monometallic counterparts for a wide range of environmental and commercial catalytic transformations. Analysis of complementary surface characterization (XPS, Boehm's titration, and zeta potential measurements) was used to elucidate alterations in the surface functionality of two activated carbon supports during acid exposure. When considered in parallel to the experimentally determined electrostatic and conformational changes of the polymer surrounding the nanoparticles, an electrostatic model is proposed describing polymer protected nanoparticle deposition with several polymer-carbon support examples described. Consideration of the electrostatic interactions ensures full deposition of the polymer protected nanoparticles and at the same time influences the structure of the bimetallic nanoparticle immobilized on the support. The normalized activity of AuPd catalysts prepared with 133 ppm H₂SO₄ has a much higher activity for the direct synthesis of hydrogen peroxide compared to catalysts prepared in the absence of acid. Detailed characterization by XPS indicates that the surface becomes enriched in Au in the Au-Pd samples prepared with acid, suggesting an improved dispersion of smaller bimetallic nanoparticles, rich in Au, that are known to be highly active for the direct synthesis reaction. Subsequent microscopy measurements confirmed this hypothesis, with the acid addition catalysts having a mean particle size ∼2 nm smaller than the zero acid counterparts. The addition of acid did not result in a morphology change, and random alloyed bimetallic AuPd nanoparticles were observed in catalysts prepared by sol immobilization in the presence and absence of acid. This work shows that the deposition of polymer protected AuPd nanoparticles onto activated carbon is heavily influenced by the acid addition step in the sol immobilization process. The physicochemical properties of both the polymer and the activated carbon support should be considered when designing a bimetallic nanoparticle catalyst by sol immobilization to ensure the optimum performance of the final catalyst.

The Direct Synthesis of Hydrogen Peroxide Over Supported Pd-Based Catalysts: An Investigation into the Role of the Support and Secondary Metal Modifiers

The direct synthesis of H2O2 from molecular H2 and O2 over Pd-based catalysts, prepared via an industrially relevant, excess chloride co-impregnation procedure is investigated. Initial studies into the well-established PdAu system demonstrated the key role of Pd: Au ratio on catalytic activity, under conditions that have previously been found to be optimal for H2O2 formation. Further investigations using the optimal Pd: Au ratio identified the role of the catalyst support in controlling particle size and Pd oxidation state and thus catalytic performance. Subsequently, with an aim to replace Au with cheaper alternatives, the alloying of Pd with more abundant secondary metals is explored.

Graphical Abstract

Chemical and Electrochemical O2 Reduction on Earth-Abundant M-N-C Catalysts and Implications for Mediated Electrolysis

M-N-C catalysts, incorporating non-precious-metal ions (e.g. M = Fe, Co) within a nitrogen-doped carbon support, have been the focus of broad interest for electrochemical O₂ reduction and aerobic oxidation reactions. The present study explores the mechanistic relationship between the O₂ reduction mechanism under electrochemical and chemical conditions. Chemical O₂ reduction is investigated via the aerobic oxidation of a hydroquinone, in which the O-H bonds supply the protons and electrons needed for O₂ reduction to water. Mechanistic studies have been conducted to elucidate whether the M-N-C catalyst couples two independent half-reactions (IHR), similar to electrode-mediated processes, or mediates a direct inner-sphere reaction (ISR) between O₂ and the organic molecule. Kinetic data support the latter ISR pathway. This conclusion is reinforced by rate/potential correlations that reveal significantly different Tafel slopes, implicating different mechanisms for chemical and electrochemical O₂ reduction.

Enhancing the catalytic performance of PdAu catalysts by W-induced strong interaction for the direct synthesis of H2O2

W-Induced strong interaction with PdAu is the key to the enhanced catalytic performance for the direct synthesis of H2O2, with WO3 species partially encapsulating the PdAu particles.

A metal free catalyst for efficient and stable one-step photocatalytic production of pure hydrogen peroxide

Hydrogen peroxide (H2O2) is widely used as a green and clean energy. The pure H2O2 solution has attracted much attention for its special applications in many fields. Photocatalytic water splitting...

Enhancing catalytic performance of AuPd catalysts towards the direct synthesis of H2O2 through incorporation of base metals

The introduction of small quantities of tertiary base metals into supported AuPd nanoparticles is found to result in improved catalytic performance towards the direct synthesis of H2O2 compared to the...

Synthesis and performance of PdMulti@HCS catalysts with Pd nanoparticles partially embedded in the inner wall of hollow carbon spheres for the direct synthesis of hydrogen peroxide from hydrogen and oxygen

PdMulti@HCS catalysts ensure the maximum exposure of Pd active sites and optimal transfer and diffusion ability for H2O2 synthesis.

Direct synthesis of H2O2 over Pd–M@HCS (M = Sn, Fe, Co, or Ni): effects of non-noble metal M on the electronic state and particle size of Pd

Direct synthesis of H2O2 in a yolk–shell structure assisted by M (M = Fe,Co,Ni,Sn) metal doping.

The oxidative degradation of phenol via in situ H2O2 synthesis using Pd supported Fe-modified ZSM-5 catalysts

Bifunctional Pd/Fe-ZSM-5 catalysts promote pollutant degradation through in situ H2O2 synthesis.

Enhanced oxygen transfer over bifunctional Mo-based oxametallacycle catalyst for epoxidation of propylene

Activation of inert propylene to produce propylene oxide (PO) is critical, but still faces some challenges in realizing higher PO selectivity and productivity. Herein, a temperature-controlled phase transfer catalyst (MoOO·DMF) is prepared for the liquid-phase epoxidation of propylene with tert-butyl hydroperoxide (TBHP) as oxidant, which exhibit the selectivity of 90.6% and the productivity of 1286.42·h^-1 for PO (catalyst/propylene = 0.77 mol‰). Some experimental factors (solvent types, reaction temperature, contact time, the dosage of catalyst, TBHP and substrate) were investigated, and the reaction kinetics and thermodynamics are discussed. MoOO·DMF has the characteristic of both homogeneous and heterogeneous catalysts, which can be dissolved in the solvent at higher temperatures and separated from the solvent after reaction by lowering the temperature. Importantly, MoOO·DMF has a wonderful epoxidation performance for many olefins (e.g., light olefins, linear α-olefins, cyclic olefins and others). The mechanisms are proved by in-situ FT-IR, ESR and HRMS spectrum to be the selective oxygen transfer from tert-butyl peroxide radical and the MoOO bridge in MoOO·DMF to propylene. Density functional theory (DFT) calculations show that the MoOO bridge in catalyst is the key role for the activation of both the OH bond in TBHP and the CC bond in propylene, thus enhanced the epoxidation of propylene.

Continuous-flow reactor setup for operando x-ray absorption spectroscopy of high pressure heterogeneous liquid-solid catalytic processes

A continuous-flow reactor and a continuous-flow setup compatible with operando x-ray absorption spectroscopy (XAS) were designed for safely studying liquid-phase reactions on solid high atomic number transition metal catalysts (e.g., Au, Pd, and Pt) under pressures up to 100 bars with temperatures up to 100 °C. The reactor has a stainless-steel body, 2 mm thick polyether ether ketone (PEEK) x-ray windows, and a low internal volume of 0.31 ml. The rectangular chamber (6 × 5 × 1 mm³) between the PEEK x-ray windows allows us to perform XAS studies of packed beds or monoliths in the transmission mode at any position in the cell over a length of 60 mm. A 146° wide-angle beam access also allows recording complementary x-ray fluorescence or x-ray diffraction signals. The setup was engineered to continuously feed a single-phase liquid flow saturated with one or more gaseous reactants to the liquid-solid XAS reactor containing no free gas phase for enhanced process safety and sample homogeneity. The proof of concept for the continuous-flow XAS cell and high-pressure setup was provided by operando XAS measurements during the direct synthesis of hydrogen peroxide at room temperature and 40 bars using a 35 ± 5 mg catalyst (1 wt. % Pd/TiO₂) and inline near-infrared spectroscopy. The experiments prove that the system is well suited to follow the reaction in the liquid phase while recording high-quality XAS data, paving the way for detailed studies on the catalyst structure and structure-activity relationships.

Carbon-Based Electrocatalysts for Efficient Hydrogen Peroxide Production

Hydrogen peroxide (H₂ O₂ ) is an environment-friendly and efficient oxidant with a wide range of applications in different industries. Recently, the production of hydrogen peroxide through direct electrosynthesis has attracted widespread research attention, and has emerged as the most promising method to replace the traditional energy-intensive multi-step anthraquinone process. In ongoing efforts to achieve highly efficient large-scale electrosynthesis of H₂ O₂ , carbon-based materials have been developed as 2e^- oxygen reduction reaction catalysts, with the benefits of low cost, abundant availability, and optimal performance. This review comprehensively introduces the strategies for optimizing carbon-based materials toward H₂ O₂ production, and the latest advances in carbon-based hybrid catalysts. The active sites of the carbon-based materials and the influence of coordination heteroatom doping on the selectivity of H₂ O₂ are extensively analyzed. In particular, the appropriate design of functional groups and understanding the effect of the electrolyte pH are expected to further improve the selective efficiency of producing H₂ O₂ via the oxygen reduction reaction. Methods for improving catalytic activity by interface engineering and reaction kinetics are summarized. Finally, the challenges carbon-based catalysts face before they can be employed for commercial-scale H₂ O₂ production are identified, and prospects for designing novel electrochemical reactors are proposed.

Precisely Engineered Supported Gold Clusters as a Stable Catalyst for Propylene Epoxidation

Designing a stable and selective catalyst with high H₂ utilisation is of pivotal importance for the direct gas-phase epoxidation of propylene. This work describes a facile one-pot methodology to synthesise ligand-stabilised sub-nanometre gold clusters immobilised onto a zeolitic support (TS-1) to engineer a stable Au/TS-1 catalyst. A non-thermal O₂ plasma technique is used for the quick removal of ligands with limited increase in particle size. Compared to untreated Au/TS-1 catalysts prepared using the deposition precipitation method, the synthesised catalyst exhibits improved catalytic performance, including 10 times longer lifetime (>20 days), increased PO selectivity and hydrogen efficiency in direct gas phase epoxidation. The structure-stability relationship of the catalyst is illustrated using multiple characterisation techniques, such as XPS, ³¹ P MAS NMR, DR-UV/VIS, HRTEM and TGA. It is hypothesised that the ligands play a guardian role in stabilising the Au particle size, which is vital in this reaction. This strategy is a promising approach towards designing a more stable heterogeneous catalyst.

Assessing the efficiency of low-cost cleaning methods for diatoms from intertidal sediment samples

This study aims to compare the effectiveness of several low-cost reagents in obtaining high-quality diatom slides for microphytobenthos research. We evaluated the performance of eight reagents in sediment samples of beach intertidal zones. For each of the tested reagents, different pre-treatment conditions (pre-washed; non-washed) and three different temperatures (room temperature at 26 °C, 60 °C, and 100 °C) were also evaluated. For each treatment (combinations between reagents, temperatures, and pre-treatment conditions), we counted diatoms cells that met the criteria necessary for taxonomic identification (Whole/Half frustules or valves without cell material) in 30 randomly chosen fields of view in definitive preparations made from the treated samples. We also compared the treatments regarding species richness and diversity observed in the definitive preparations. The reagents influenced more the conditions of diatoms cells than the temperature and pre-treatment. H₂O₂, HNO₃, NaClO were the methods that had the best performance in relation to the number of identifiable items. The six treatments with H₂O₂ presented similar amounts of identifiable items, regardless of pre-treatment and temperature. HNO₃ presented a higher number of identifiable items in non-washed and pre-washed treatments at 60 °C and non-washed at 100 °C. NaClO had its best performance the following treatments: non-washed at room temperature and non-washed and pre-washed at 60 °C. H₂O₂ and HNO₃ also showed better results for diatom species richness and diversity, followed by NaClO. The use of H₂O₂ was more robust since it obtained good results regardless of temperature and pre-treatments and should be preferred. HNO₃ and NaClO should be used only with the appropriate temperatures, and pre-washing should be avoided.

The Direct Synthesis of Hydrogen Peroxide over AuPd Nanoparticles: An Investigation into Metal Loading

The direct synthesis of H2O2 from molecular H2 and O2 over AuPd catalysts, supported on TiO2 and prepared via an excess chloride co-impregnation procedure is investigated. The role of Au:Pd ratio on the catalytic activity towards H2O2 formation and its subsequent degradation is evaluated under conditions that have previously been found to be optimal for the formation of H2O2. The combination of relatively small nanoparticles, of mixed Pd-oxidation state is shown to correlate with enhanced catalytic performance. Subsequently, a detailed study of catalytic activity towards H2O2 synthesis as a function of AuPd loading was conducted, with a direct correlation between catalytic activity and metal loading observed.

Graphic Abstract