Metal Sulfide Photocatalysis: Visible‐Light‐Induced Organic Transformations

Two-Dimensional Sc2CCl2/XSe2(X=Mo, Pt) van der Waals Heterojunctions: Promising Photocatalytic Hydrogen Evolution Materials

In the field of photocatalysis, new heterojunction materials are increasingly explored to achieve efficient energy conversion and environmental catalysis under visible light and sunlight. This paper presents a study on two newly constructed two-dimensional van der Waals heterojunctions, Sc2CCl2/MoSe2 and Sc2CCl2/PtSe2, using density-functional theory. The study includes a systematic investigation of their geometrical structure, electronic properties, and optical properties. The results indicate that both heterojunctions are thermodynamically, kinetically, and mechanically stable. Additionally, Bader charge analysis reveals that both heterojunctions exhibit typical type II band properties. However, the band gap of the Sc2CCl2/MoSe2 heterojunction is only 1.18 eV, which is insufficient to completely cross the reduction and oxidation (REDOX) potential of 1.23 eV, whereas the band gap of Sc2CCl2/PtSe2 heterojunction is 1.49 eV, which is theoretically capable for water decomposition. The subsequent calculation of the Sc2CCl2/PtSe2 heterojunction demonstrate excellent hole carrier mobility and high efficiency light absorption in the visible light range, facilitating the separation of photogenerated electrons and holes. More importantly, Sc2CCl2/PtSe2 vdW type II heterojunction can achieve full water decomposition from pH 1 to pH 4, and its thermodynamic feasibility is confirmed by Gibbs free energy results. The aim of this study is to develop materials and analyses that will result in optoelectronic devices that are more efficient, stable, and sustainable.

Recent progress of metal halide perovskite materials in heterogeneous photocatalytic organic reactions

Photocatalytic technology is widely regarded as an important way to utilize solar energy and achieve carbon neutrality, which has attracted considerable attentions in various fields over the past decades. Metal halide perovskites (MHPs) are recognized as "superstar" materials due to their exceptional photoelectric properties, readily accessible and tunable structure, which made them intensively studied in solar cells, light-emitting diodes, and solar energy conversion fields. Since 2018, increased attention has been focused on applying the MHPs as a heterogeneous visible light photocatalyst in catalyzing organic synthesis reactions. In this review, we present an overview of photocatalytic technology and principles of heterogeneous photocatalysis before delving into the structural characteristics, stability, and classifications of MHPs. We then focus on recent developments of MHPs in photocatalyzing various organic synthesis reactions, such as oxidation, cyclization, C-C coupling etc., based on their classifications and reported reaction types. Finally, we discuss the main limitations and prospects regarding the application of metal halide perovskites in organic synthesis.

S-scheme homojunction of 0D cubic/2D hexagonal ZnIn2S4 for efficient photocatalytic reduction of nitroarenes

The targeted conversion of toxic nitroarenes to corresponding aminoarenes presents significant promise in simultaneously addressing environmental pollution concerns and producing value-added fine chemicals. In this study, we synthesize a 0D/2D ZnIn2S4 homojunction (CH-ZnIn2S4) by in situ growth of cubic ZnIn2S4 (C-ZnIn2S4) quantum dots onto the surface of ultrathin hexagonal ZnIn2S4 (H-ZnIn2S4) nanosheets for photocatalytic reduction of nitroarenes to aminoarenes using water as a hydrogen donor. The optimal performance of photocatalytic nitro reduction over the 0D/2D CH-ZnIn2S4 homojunction reaches 96.1% within 20 min of visible light irradiation, which is 2.45 and 1.52 times than that of C-ZnIn2S4 (39.3%) and H-ZnIn2S4 (63.3%), respectively. The improved photocatalytic performance can be attributed to the formation of a step-type S-scheme homojunction, characterized by identity chemical composition and natural lattice matching. The configuration enables continuous band bending and a low energy barrier of charge transportation, benefiting the charge transfer across the interface while maximizing their redox capabilities. Furthermore, the 2D structure of H-ZnIn2S4 nanosheets offers abundant surface sites to immobilize the 0D C-ZnIn2S4 that provides ample exposed active sites with low overpotential for HER, thereby ensuring high hydrogenation reduction activity of nitroarenes. The study is expected to inspire further interest in the reasonable design of homojunction structures for efficient and sustainable photocatalytic redox reactions.

Single-step synthesis of ternary metal chalcogenides (sf-CuInS2 and sf-CuInSe2) stripped off the organic cover and their use as a catalyst for symmetric Glaser-Hay coupling reactions

Generally, inorganic nano/microparticles produced by chemical routes are covered by organic surfactants or polymers to control their agglomeration during their synthesis. However, these surfactants and polymers negatively affect their catalytic activity because these molecules mask the surface. This work presents the synthesis of surfactant-free CuInS2 and CuInSe2 (sf-CuInS2 and sf-CuInSe2) nano/microparticles through simple reactions without surfactant or polymer coatings using LiBH4 under a thermodynamically favourable condition. These reactions are rare observations of a single-step process to produce ternary metal chalcogenides without any template assistance. We have also demonstrated efficient catalysis by sf-CuInS2 nanoparticles in the coupling reaction of substituted phenylacetylenes. We tested it as catalysts in dimerizing 1,3-diyne derivatives while using 8-diazabicyclo[5.4.0]undec-7-ene (DBU) as the base. These Glassar-Hay coupling reactions are conducted at room temperature in acetonitrile (4-7 h, depending on the substrate) using 10 mg of sf-CuInS2. The maximum yield obtained in these reactions is 97%, while the catalyst is reusable for five cycles with little difference in its ability to catalyse. The effectiveness of the catalyst is credited to the availability of a free catalytic surface.

Nano-Bio Interactions: Biofilm-Targeted Antibacterial Nanomaterials

Biofilm is a spatially organized community formed by the accumulation of both microorganisms and their secretions, leading to persistent and chronic infections because of high resistance toward conventional antibiotics. In view of the tunable physicochemical properties and the related unique biological behavior (e.g., size-, shape-, and surface charge-dependent penetration, protein corona endowed targeting, catalytic- and electronic-related oxidative stress, optical- and magnetic-associated hyperthermia, etc.), nanomaterials-based therapeutics are widely used for the treatment of biofilm-associated infections. In this review, the biological characteristics of biofilm are introduced. And the nanomaterials-based antibacterial strategies are further discussed via biofilm targeting, including preventing biofilm formation, enhancing biofilm penetration, disrupting the mature biofilm, and acting as drug delivery systems. In which, the interactions between biofilm and nanomaterials include mechanical disruption, electron transfer, enzymatic degradation, oxidative stress, and hyperthermia. Additionally, the current advances of nanomaterials for antibacterial nanomaterials by biofilm targeting are summarized. This review aims to present a complete vision of antibacterial nanomaterials-biofilm (nano-bio) interactions, paving the way for the future development and clinical translation of effective antibacterial nanomedicines.

The prospect of CuxO-based catalysts in photocatalysis: From pollutant degradation, CO2 reduction, and H2 production to N2 fixation

The topic of photocatalysis and CuxO-based materials has been intertwined for quite a long time. Its relatively high abundance in the earth's crust makes it an important target for researchers around the globe. One of the properties exploited by researchers is its ability to exist in different oxidation states (Cu0, Cu+, Cu2+, and Cu3+) and its implications on photocatalytic efficiency improvement. Recently, they have been extensively used as photocatalytic materials for dye and pollutant degradation. However, it has almost reached saturation levels, therefore, currently, they are being mostly utilized for CO2 reduction and H2 evolution. Hence, this review will discuss the evolution (in application) of CuxO-based photocatalysts, relating to their past, present, and future. Moreover, photocatalytic efficiency improvement strategies such as doping, heterojunction formation, and carbonaceous construction with other materials will also be touched upon. Finally, the prospect of Cu2O-based photocatalysts will be discussed in the field of photocatalytic N2 fixation to ammonia. The significance of N2 chemisorption on photocatalysts to maximize ammonia production will also be given importance.

Synthesis of Sb2S3 nanosphere layer by chemical bath deposition for the photocatalytic degradation of methylene blue dye

An antimony tri-sulfide Sb₂S₃ nanosphere photocatalyst was effectively deposited utilizing sodium thiosulfate and antimony chloride as the starting precursors in a chemical bath deposition process. This approach is appropriate for the large-area depositions of Sb₂S₃ at low deposition temperatures without the sulfurization process since it is based on the hydrolytic decomposition of starting compounds in aqueous solution. X-ray diffraction patterns and Raman spectroscopy analysis revealed the formation of amorphous Sb₂S₃ layers. The scanning electron microscopy images revealed that the deposited Sb₂S₃ has integrated small nanospheres into sub-microspheres with a significant surface area, resulting in increased photocatalytic activity. The optical direct bandgap of the Sb₂S₃ layer was estimated to be about 2.53 eV, making amorphous Sb₂S₃ appropriate for the photodegradation of organic pollutants in the presence of solar light. The possibility of using the prepared Sb₂S₃ layer in the photodegradation of methylene blue aqueous solutions was investigated. The degradation of methylene blue dye was performed to evaluate the photocatalytic property of Sb₂S₃ under visible light. The amorphous Sb₂S₃ exhibited photocatalytic activity for the decolorization of methylene blue solution under visible light. The mechanism for the photocatalytic degradation of methylene blue has been proposed. Our results suggest that the amorphous Sb₂S₃ nanospheres are valuable material for addressing environmental remediation issues.

Investigation of boron-doped graphene oxide anchored with copper sulphide flowers as visible light active photocatalyst for methylene blue degradation

The non-biodegradable nature of waste emitted from the agriculture and industrial sector contaminates freshwater reserves. Fabrication of highly effective and low-cost heterogeneous photocatalysts is crucial for sustainable wastewater treatment. The present research study aims to construct a novel photocatalyst using a facile ultrasonication-assisted hydrothermal method. Metal sulphides and doped carbon support materials work well to fabricate hybrid sunlight active systems that efficiently harness green energy and are eco-friendly. Boron-doped graphene oxide-supported copper sulphide nanocomposite was synthesized hydrothermally and was assessed for sunlight-assisted photocatalytic degradation of methylene blue dye. BGO/CuS was characterized through various techniques such as SEM-EDS, XRD, XPS, FTIR, BET, PL, and UV-Vis DRS spectroscopy. The bandgap of BGO-CuS was found to be 2.51 eV as evaluated through the tauc plot method. The enhanced dye degradation was obtained at optimum conditions of pH = 8, catalyst concentration (20 mg/100 mL for BGO-CuS), oxidant dose (10 mM for BGO-CuS), and optimum time of irradiation was 60 min. The novel boron-doped nanocomposite effectively degraded methylene blue up to 95% under sunlight. Holes and hydroxyl radicals were the key reactive species. Response surface methodology was used to analyze the interaction among several interacting parameters to remove dye methylene blue effectively.

Interfacial S-O bonds specifically boost Z-scheme charge separation in a CuInS2/In2O3 heterojunction for efficient photocatalytic activity

Reducing the recombination rate of photoexcited electron-hole pairs is always a great challenging work for the photocatalytic technique. In response to this issue, herein, a novel Z-scheme CuInS₂/In₂O₃ with interfacial S-O linkages was synthesized by a hydrothermal and subsequently annealing method. The Fourier transform infrared (FT-IR) and X-ray photoelectron spectrometer (XPS) measurements confirmed the formation of covalent S-O bonds between CuInS₂ and In₂O₃. The quenching and electron spin resonance (ESR) tests revealed the Z-scheme transfer route of photogenerated carriers over the CuInS₂/In₂O₃ heterojunctions, which was further verified theoretically via density functional theory (DFT) calculations. As expected, the CuInS₂/In₂O₃ heterojunctions showed significantly boosted photocatalytic activities for lomefloxacin degradation and Cr(vi) reduction under visible light illumination compared with the bare materials. Accordingly, a synergistic photocatalytic mechanism of Z-scheme heterostructures and interfacial S-O bonding was proposed, in which the S-O linkage could act as a specific bridge to modify the Z-scheme manner for accelerating the interfacial charge transmission. Furthermore, the CuInS₂/In₂O₃ heterojunction also exhibited excellent performance perceived in the stability and reusability tests. This work provides a new approach for designing and fabricating novel Z-scheme heterostructures with a high-efficiency charge transfer route.

Synthesis of hierarchical Cd-Ni-MOF micro/nanostructures and derived Cd-Ni-MOF/CdS/NiS hybrid photocatalysts for efficient photocatalytic hydrogen evolution

Hierarchical micro/nanostructures assembled from nanorods and nanosheets have become promising candidates for photocatalysis. In this work, a series of hierarchical Cd-Ni-MOF micro/nanostructures, assembled from nanosheets and nanorods, were fabricated via a two-step solvothermal process involving the partial replacement of Ni²⁺ with Cd²⁺ in the Ni-MOF-74 structure. Different morphologies were obtained by considering different volume ratios of DMF and ethanol as the solvent during synthesis. Hierarchical Cd-Ni-MOF-T/CdS/NiS hybrid micro/nanostructures were synthesized by Ni²⁺ and Cd²⁺ exchange of Cd-Ni-MOFs with S^2-. The as-prepared samples, which were composed of thin nanosheets alone, exhibited the best photocatalytic H₂ evolution rate of about 40.08 mmol g^-1 h^-1. The p-n junction between CdS and NiS was found to be beneficial for the migration of photogenerated electrons from the conduction band (CB) of NiS to the CB of CdS. The heterojunction between CdS and Cd-Ni-MOF-T further promoted the transfer of an electron from the CB of CdS to the CB of Cd-Ni-MOF-T. Thus, this study demonstrated that hierarchical Cd-Ni-MOF-T/CdS/NiS architectures have a large specific surface area, leading to significantly improved photocatalytic activity.

A copper nitride nanocube catalyst for highly efficient hydroboration of alkynes

The hydroboration of alkynes with bis(pinacolato)diboron is a useful method for the synthesis of vinyl boronate esters, which are essential intermediates in organic syntheses. Copper catalysts have been used extensively in these reactions. However, previously reported Cu-catalyst systems inevitably require additives and elevated temperatures. Herein, we report, for the first time, a simple and efficient hydroboration of alkynes under additive-free and mild reaction conditions (i.e., at a temperature of 30 °C) using a copper nitride nanocube (Cu₃N NC) catalyst. A wide range of alkynes can be transformed into their corresponding boronate esters. Cu₃N NCs are also applicable in the hydroboration of alkynes with tetrahydroxydiboron to synthesize vinyl boronic acids. Moreover, the Cu₃N NCs were easily separated by simple filtration and could be reused several times without any loss of their original activity. Hence, these highly active and reusable Cu₃N NC catalysts offer an environmentally friendly route for the efficient production of vinyl boronates.

Carbazole-based photocatalyst (4CzIPN) for novel donor-acceptor (D-A) fluorophore-catalyzed visible-light-induced photosynthesis of 3,4-dihydropyrimidin-2-(1H)-ones/thiones via a proton-coupled electron transfer (PCET) process

Based on the Biginelli reaction of β-ketoesters, arylaldehydes, and urea/thiourea, we created a green radical synthesis procedure for 3,4-dihydropyrimidin-2-(1H)-ones/thiones. A PCET (proton-coupled electron transfer) photocatalyst was used in an ethanol solution in an air environment and at room temperature and visible light to provide a renewable energy source. In this study, we seek to create a novel donor-acceptor (D-A) fluorophore that is affordable and widely available. The carbazole-based photocatalyst (4CzIPN), in addition to its time-saving capabilities and simplicity of use, exhibits excellent yields, is energy-efficient, and is ecologically friendly. This makes it possible to track the evolution of environmental and chemical factors throughout time. To determine the turnover number (TON) and turnover frequency (TOF) of 3,4-dihydropyrimidin-2-(1H)-ones/thiones, a study was done. Gram-scale cyclization demonstrates that it may be used in industry effectively.

Self-Assembled Peptide-Based Nanodrugs: Molecular Design, Synthesis, Functionalization, and Targeted Tumor Bioimaging and Biotherapy

Functional nanomaterials as nanodrugs based on the self-assembly of inorganics, polymers, and biomolecules have showed wide applications in biomedicine and tissue engineering. Ascribing to the unique biological, chemical, and physical properties of peptide molecules, peptide is used as an excellent precursor material for the synthesis of functional nanodrugs for highly effective cancer therapy. Herein, recent progress on the design, synthesis, functional regulation, and cancer bioimaging and biotherapy of peptide-based nanodrugs is summarized. For this aim, first molecular design and controllable synthesis of peptide nanodrugs with 0D to 3D structures are presented, and then the functional customization strategies for peptide nanodrugs are presented. Then, the applications of peptide-based nanodrugs in bioimaging, chemotherapy, photothermal therapy (PTT), and photodynamic therapy (PDT) are demonstrated and discussed in detail. Furthermore, peptide-based drugs in preclinical, clinical trials, and approved are briefly described. Finally, the challenges and potential solutions are pointed out on addressing the questions of this promising research topic. This comprehensive review can guide the motif design and functional regulation of peptide nanomaterials for facile synthesis of nanodrugs, and further promote their practical applications for diagnostics and therapy of diseases.

Unveiling the Synthetic Potential of 1,3,5-Tri(10H-phenothiazin-10-yl)benzene-Based Optoelectronic Material: A Metal-Free and Recyclable Photocatalyst for Sequential Functionalization of C(sp2)-H Bonds

1,3,5-Tri(10H-phenothiazin-10-yl)benzene (3PTZ) is endowed with unique redox and photoresponsive characteristics and has been utilized as a p-type redox center for organic battery cathode material and a room-temperature phosphorescence (RTP) material, respectively. Conversely, its exploration in other research fields, particularly organic synthesis, remains unknown. Here, we demonstrate that 3PTZ-POP synthesized via cross-linking of 3PTZ is capable of harvesting visible-light photons and selectively converting solar energy to chemical energy. Specifically, 3PTZ-POP functions as a metal-free and recyclable photocatalyst to promote the sequential C(sp²)-H functionalizations of N-arylacrylamides with readily available trifluoromethylsulfonyl chloride as the radical precursor. An array of 3,3-disubstituted 2-oxindoles bearing a pharmaceutically important CF₃ moiety are delivered in moderate to excellent yields under mild and sustainable conditions.

Photocatalytic Materials Obtained from E-Waste Recycling: Review, Techniques, Critique, and Update

Waste-derived materials obtained from the recovery and recycling of electronic waste (e-waste) such as batteries and printed circuit boards have attracted enormous attention from academia and industry in recent years, especially due to their eco-friendly nature and the massive increment in e-waste due to technological development. Several investigations in the literature have covered the advances achieved so far. Meanwhile, photocatalytic applications are especially of interest since they maintain mutual benefits and can be used for H2 production from solar water splitting based on semiconductor processing as a proper environmentally friendly technique for solar energy conversion. In addition, they can be utilized to degrade a variety of organic and non-organic contaminations. Nonetheless, to the best of the authors’ knowledge, there has not been any comprehensive review that has specifically been focused on e-waste-derived photocatalytic materials. In this regard, the present work is dedicated to thoroughly discussing the related mechanisms, strategies, and methods, as well as the various possible photocatalysts synthesized from e-wastes with some critiques in this field. This brief overview can introduce modern technologies and promising possibilities for e-waste valorization, photocatalytic processes, and new photocatalytic degradation methods of eco-friendly nature. This paper discusses various e-waste-obtained photocatalytic materials, synthesis procedures, and applications, as well as several types of e-waste, derived materials such as TiO2, ZnO, indium tin oxide, and a variety of sulfide- and ferrite-based photocatalytic materials.

Porous organic polymers for light-driven organic transformations

As a new generation of porous materials, porous organic polymers (POPs), have recently emerged as a powerful platform of heterogeneous photocatalysis. POPs are constructed using extensive organic synthesis methodologies, with various functional organic units being connected via high-energy covalent bonds. This review systematically presents the recent advances in POPs for visible-light driven organic transformations. Herein, we firstly summarize the common construction strategies for POP-based photocatalysts based on two major approaches: pre-design and post-modification; secondly, we categorize and summarize the synthesis methods and organic reaction types for constructing various types of POPs. We then classify and introduce the specific reactions of current light-driven POP-mediated organic transformations. Finally, we outline the current state of development and the problems faced in light-driven organic transformations by POPs, and we present some perspectives to motivate the reader to explore solutions to these problems and confront the present challenges in the development process.

Highly hydrophilic covalent organic frameworks as efficient and reusable photocatalysts for oxidative coupling of amines in aqueous solution

Highly hydrophilic 2D-COFs, TFB-XX-DMTH, have been successfully constructed by a three-component in situ assembly strategy and exhibited superior photocatalytic performance in oxidative coupling reactions of benzylamines in aqueous solution.

Sulfide-Based Photocatalysts Using Visible Light, with Special Focus on In2S3, SnS2 and ZnIn2S4

Sulfides are frequently used as photocatalysts, since they absorb visible light better than many oxides. They have the disadvantage of being more easily photocorroded. This occurs mostly in oxidizing conditions; therefore, they are commonly used instead in reduction processes, such as CO2 reduction to fuels or H2 production. Here a summary will be presented of a number of sulfides used in several photocatalytic processes; where appropriate, some recent reviews will be presented of their behaviour. Results obtained in recent years by our group using some octahedral sulfides will be shown, showing how to determine their wavelength-dependent photocatalytic activities, checking their mechanisms in some cases, and verifying how they can be modified to extend their wavelength range of activity. It will be shown here as well how using photocatalytic or photoelectrochemical setups, by combining some enzymes with these sulfides, allows achieving the photo-splitting of water into H2 and O2, thus constituting a scheme of artificial photosynthesis.

Nanomaterial catalysts for organic photoredox catalysis-mechanistic perspective

Solar energy conversions play a vital role in the renewable energy industry. In recent years, photoredox organic transformations have been explored as an alternative way to use solar energy. Catalysts for such photocatalytic systems have evolved from homogeneous metal complexes to heterogeneous nanomaterials over the past few decades. Herein, three important carrier transfer mechanisms are presented, including charge transfer, energy transfer and hot carrier transfer. Several models established by researchers to understand the catalytic reaction mechanisms are also illustrated, which promote the reaction system design based on theoretical studies. New strategies are introduced in order to enhance catalytic efficiency for future prospects.

Nanocrystals perovskites photocatalyzed singlet oxygen generation for light-driven organic reactions

Lead halide perovskite nanocrystals were prepared and used as photocatalysts for the in situ ¹O₂ generation to perform hetero Diels-Alder, ene and oxidation reactions with suitable dienes and alkenes. The methodology has been reasonably standardized and made applicable to a variety of olefinic substrates. The scope of the method is finely illustrated by the results in all the tested reactions, which allowed to obtain desymmetrized hydroxy-ketone derivatives, unsaturated ketones and epoxides. Some limitations were also observed especially in the case of the alkene oxidations as well as poor chemoselectivity was somewhere observed. ¹O₂ generated by lead halide perovskite nanocrystals as photocatalyst in organic reactions.

Plasmon-Mediated 2D/2D Phase Junction for Improved Photocatalytic Hydrogen Generation Activity

A phase junction fabricated by two crystalline phases of the same semiconductor is a promising photocatalyst with efficient charge transfer and separation. However, the weak light absorption and uncontrolled phase junction interface limit the generation and separation of photogenerated carriers. Herein, a two-dimensional (2D)/2D phase junction was prepared by growing orthorhombic WO₃ ultrathin nanosheets on hexagonal WO₃ nanosheets through a one-step hydrothermal method. The orthorhombic/hexagonal WO₃ possesses large-area phase junction interfaces, rich reactive sites, and built-in electric field, which greatly accelerate the photogenerated charge separation and transfer. Thus, the orthorhombic/hexagonal WO₃ displayed excellent photocatalytic hydrogen generation activity from water splitting under light irradiation (λ > 420 nm), which is 2.16 and 2.85 times those of orthorhombic and hexagonal WO₃ phase components. Furthermore, Au nanoparticles (about 4.5 nm in diameter) were deposited on both orthorhombic and hexagonal WO₃ nanosheets to form a plasmon-mediated phase junction. The hybrids exhibit prominent visible-light absorption and efficient charge transfer, leading to a further improved photocatalytic hydrogen generation activity. Further characterization studies demonstrate that superior photoactivity arises from the excellent visible-light-harvesting ability, appropriate band structure, and high-efficiency and multichannel transferring processes of photogenerated carriers.

Quantum Dot Photocatalysts for Organic Transformations

Quantum dots (QDs) with tunable photo-optical properties and colloidal nature are ideal for a wide range of photocatalytic reactions. In particular, QD photocatalysts for organic transformations can provide new and effective synthetic routes to high value-added molecules under mild conditions. In this Perspective, we discuss the advances of employing QDs for visible-light-driven organic transformations categorized into net reductive reactions, net oxidative reactions, and redox neutral reactions. We then provide our outlook for potential future directions in the field: nanostructure engineering to improve charge separation efficiencies, ligand shell engineering to optimize overall catalyst performance, in situ comprehensive studies to delineate underlying reaction mechanisms, and laboratory automation with the assistance of modern computing techniques to revolutionize the reaction optimization process.

Interface enriched highly interlaced layered MoS2/NiS2 nanocomposites for the photocatalytic degradation of rhodamine B dye

In the past few decades, air and water pollution by organic dyes has become a serious concern due to their high toxicity. Removal of these organic dyes from polluted water bodies is a serious environmental concern and the development of new advanced photocatalytic materials for decomposing organic dyes can be a good solution. In this work, layered molybdenum disulfide/nickel disulfide (MoS₂/NiS₂) nanocomposites with various NiS₂ content was synthesized by a one-step hydrothermal method using citric acid as a reducing agent. The X-ray diffraction pattern shows the hexagonal and cubical crystal structure of MoS₂ and NiS₂, respectively. Morphological analysis confirms the formation of MoS₂/NiS₂ nanosheets. The elemental composition of the samples was carried out by XPS, which shows a significant interaction between NiS₂ and MoS₂. The photocatalytic performance of MoS₂/NiS₂ nanocomposites was studied by the degradation of rhodamine B (RhB). Ni-4 sample shows higher photocatalytic activity with a maximum degradation of 90.61% under visible light irradiation for 32 min.

The photocatalytic performance of MoS₂/NiS₂ nanocomposites was studied by the degradation of rhodamine B (RhB). Ni-4 sample shows higher photocatalytic activity with a maximum degradation of 90.61% under visible light irradiation for 32 min.

Metal Sulfide Nanoparticles: Precursor Chemistry

Fascination with and the need for evermore increasing efficiency, power, or strength have been the cornerstones for developing new materials and methods for their creation. Higher solar cell conversion efficiencies, increased battery storage power, and lightweight strong materials are some that have been at the forefront of attention for these efforts. Materials created for most applications start as simple chemical compounds. A study of how these chemicals have been used in the past can be used to create new materials and new methods of production. Herein, a class of materials that are valuable in a multitude of applications, metal sulfide nanoparticles, are examined, along with how they are being produced and how new methods can be established that will help to standardize and increase production capabilities. Precursor–solvent combinations that can be used to create metal sulfide nanoparticles in the gas phase are also explored.

Advances in nanomaterials for heterogeneous photocatalysis

Photocatalysis method for environmental applications has been using for a long time. This review article traces back the origin of catalysis, its classification and journey of development to heterogeneous photocatalysis and the article’s novelty is in the simplicity, and easily understandable language, designed for the beginners. These heterogeneous photocatalysts are grouped into eleven different categories. As the paper is focused on photocatalysis, an insight on fundamental principles and mechanisms of photocatalysis are explained systematically with schematic illustrations and reactions that take place during redox- oxidation and reduction reactions in photocatalysis. With an approach towards utilizing green energy and expanding the photocatalyst’ absorption wavelength range towards the visible regime, bandgap engineering techniques by adopting doping and hetero-structures are explained with examples of different materials. In addition, dominating factors of photocatalysis reaction viz. composition of a heterogeneous photocatalyst, doping, hetero-structures, pH, surface defects on photocatalysis reaction are explored, focussing on variable charge transfer mechanisms. The main influencing factor in generating reactive oxygen species is pH of the photocatalysis reaction and are studied indetail. The effect of alkalinity or acidity in catalyst surfaces and molecular interaction depending upon the point zero charges of the photocatalyst are discussed. For the better study of catalyst properties, careful analysis and study is a much-needed field as a scope for further improvement. Hence, this article will guide a beginner to understand the photocatalysis topic with ease.

Metal Sulfide Nanoparticle Synthesis with Ionic Liquids - State of the Art and Future Perspectives

Metal sulfides are among the most promising materials for a wide variety of technologically relevant applications ranging from energy to environment and beyond. Incidentally, ionic liquids (ILs) have been among the top research subjects for the same applications and also for inorganic materials synthesis. As a result, the exploitation of the peculiar properties of ILs for metal sulfide synthesis could provide attractive new avenues for the generation of new, highly specific metal sulfides for numerous applications. This article therefore describes current developments in metal sulfide nanoparticle synthesis as exemplified by a number of highlight examples. Moreover, the article demonstrates how ILs have been used in metal sulfide synthesis and discusses the benefits of using ILs over more traditional approaches. Finally, the article demonstrates some technological challenges and how ILs could be used to further advance the production and specific property engineering of metal sulfide nanomaterials, again based on a number of selected examples.

Thiol-initiated photocatalytic oxidative cleavage of the CC bond in olefins and its extension to direct production of acetals from olefins

Oxidative cleavage of a broad scope of olefins is realized over ZnIn₂S₄ under visible light, using air as oxidant and thiol as initiator. Coupled with the condensation between aldehydes/ketones and alcohols, this strategy can be used to yield acetals directly from olefins.

Construction of CoSx–ZnIn2S4 hollow nanocages derived from metal–organic frameworks for efficient photocatalytic hydrogen production

CoS_x–ZnIn₂S₄ heterostructured hollow nanocages exhibit enhanced photocatalytic hydrogen production due to the synergistic effect of unique hollow nanocages and a suitable semiconductor heterostructure.

Novel strategy for membrane biofouling control in MBR with CdS/MIL-101 modified PVDF membrane by in situ visible light irradiation

Novel control strategies for membrane biofouling with eco-friendly photocatalytic technology are critically needed in practical operation of membrane bioreactors (MBRs). In this study, a metal-organic frameworks (MOF) based photocatalytic membrane was firstly applied in an anammox MBR for a long-term biofouling control, where bacteria were inactivated and foulants were degraded simultaneously, with environmentally friendly and renewable visible light energy. By physicochemical characterization, the synthesized photocatalyst of CdS/MIL-101 showed superior visible-light photocatalytic ability, and the 1 wt% CdS/MIL-101 modified membrane C2 showed enhanced hydrophilicity and water permeability compared with the pristine membrane C0. In the long-term operation of anammox MBRs under waterproof lights irradiation, the filtration cycles of C2 (25-26 d) were obviously extended compared with C0 (10-14 d), while their average total nitrogen removal efficiencies were comparable up to 84%, indicating an excellent biofouling alleviation effect by using C2 with a satisfactory nitrogen removal performance maintained. By analysis of the biofilm on the fouled membranes, the organic foulants (especially extracellular polymeric substances) were degraded, and the live bacteria were inactivated effectively by the photocatalytic reactions of CdS/MIL-101 on C2. In the antimicrobial tests against model bacteria, C2 exhibited remarkable antimicrobial effect against both Gram-negative and Gram-positive bacteria with visible light irradiation by destruction of cell integrity with the inhibition rate of 92% for Escherichia coli and 95% for Staphylococcus aureus, respectively. In the model foulants (bovine serum albumin, sodium alginate, and humic acid) filtration tests, C2 showed higher antifouling capabilities, lower flux declining rates, and higher foulants rejection rates under visible light irradiation compared with C0. The reactive species of ·OH, e^- and h⁺ generated on C2 were verified to play the predominant role in the anti-biofouling processes by simultaneous bacteria inactivation and foulants degradation. The findings offer a novel insight into the biofouling controlling in MBRs by simultaneous bacteria inactivation and foulants degradation with an eco-friendly method.

Novel Aggregation-Induced Emission Materials/Cadmium Sulfide Composite Photocatalyst for Efficient Hydrogen Evolution in Absence of Sacrificial Reagent

This work focuses on the development of a novel organic–inorganic photoactive material composited by aggregation-induced emission luminogens (AIE) and CdS. Tetraphenylethene-based AIE (TPE-Ca) is synthesized on CdS to form CdS/TPE-Ca electrode, due to its suitable band structure and potential capability of renewable energy production. The CdS/TPE-Ca electrode presents over three-fold improved photocurrent density and dramatically reduced interfacial resistance, compared with the pure CdS electrode. In addition, the engineering of the band alignment allows the holes to accumulate on the valance band of TPE-Ca, which would partially prevent the CdS from photo-corrosion, thus improving the stability of the sacrificial-free electrolyte photoelectrochemical cell.

Photocatalytic Conversion of Lignin into Chemicals and Fuels

Lignin, an underutilized component of lignocellulosic biomass, is regarded as a rich reservoir for the production of aromatic chemicals and fuels. Despite extensive research in recent years, lignin's potential is far from being fully unlocked. Photocatalysis that uses sustainable solar energy to drive lignin conversion under mild conditions has been identified as a promising strategy and received growing research interest. This review aims to present a critical introduction to the photocatalytic conversion of lignin, including a summary of lignin conversion pathways and mechanisms, as well as the latest cutting-edge innovations on photocatalyst design and reactor construction. Moreover, the screening of solvents and regulation of other key factors that are involved in photocatalytic lignin conversion are also elucidated and future perspectives and challenges for photocatalytic conversion of lignin into valuable products are discussed.

Structural Engineering of Two-Dimensional Covalent Organic Frameworks for Visible-Light-Driven Organic Transformations

Covalent organic frameworks (COFs) emerging as a novel kind of visible light-responsive organic semiconductor have attracted extensive research attention in the field of photocatalytic organic transformations. However, the key parameters affecting their photocatalytic properties are still not clear. In this work, a series of [3 + 3] COFs with similar two-dimensional hexagonal structure but different compositions are synthesized and employed as model materials for investigating the key factors affecting the photocatalytic properties in the visible-light-driven reductive dehalogenation reaction and the aerobic cross-dehydrogenative coupling reaction. In comparison with -H and -CF₃, the -OH substituent in the aromatic ring could narrow the band gap of the COFs. The COFs with a triazine skeleton in the framework usually boost the photocatalytic activity, possibly because of the enhanced charge separation efficiency by the formation of a donor-acceptor domain. As a combined result of the narrow band gap, efficient charge separation, and high conductivity, the COF possessing both a -OH group and triazine skeleton shows the highest activity in the photocatalytic reductive dehalogenation reaction. Notably, COFs could be easily recovered and reused several times without the loss of crystallinity. Our primary results may shed light on the design of efficient COF-based semiconductors for photocatalytic organic transformations.