Regioselective Synthesis of Pyrrole-Based Poly(arylenevinylene)s via Mn-Catalyzed Hydroarylation Polyaddition

Mn-catalyzed hydroarylation polyaddition of 1-(2-pyrimidinyl)pyrrole (1a) with aromatic diynes is investigated. The use of commercially available MnBr(CO)5 as a precatalyst under the optimized reaction conditions resulted in a site- and regioselective hydroarylation polyaddition, affording the corresponding poly(arylenevinylene)s (PAVs) with excellent vinylene selectivity. The reaction protocol eliminates the production of stoichiometric amounts of byproducts from the monomers. The nonstoichiometric polyaddition of an excess amount of 1a with aromatic diynes is also demonstrated. The 2-pyrimidinyl substituent promoted the intramolecular transfer of the Mn catalyst walking through the 1a moiety.

Manganese-Catalyzed Z-Selective Allylation of Indoles with Allenyl Derivatives

Herein, we report a manganese-catalyzed Z-selective hydroarylation of allenyl ethylene carbonates (AECs) under mild conditions. The methodology employs an earth-abundant Mn(I)-catalyst, which shows high functional group tolerance, performed at room temperature, resulting in good-to-excellent yields of the products with very high Z-selectivity. Besides, mechanistic insights reveal the substitution effects of the allenes over the control of Z-selectivity.

Divergent Synthesis of Pyrazoles via Manganese Pincer Complex Catalyzed Acceptorless Dehydrogenative Coupling Reactions

This report detailed the synthesis of multi-substituted pyrazoles through the acceptorless dehydrogenative coupling (ADC) reaction catalyzed by a well-defined manganese(I)-pincer complex. Symmetrically substituted pyrazoles were synthesized by reacting 1,3-diols with hydrazines. Unsymmetrically substituted pyrazoles were selectively made via the ADC of primary alcohols with methyl hydrazones. Water and hydrogen are liberated as the green byproducts. The endurance of these methodologies has been presented by producing 30 substrates with varied functionalities. Model reactions were scaled up to demonstrate practicability. The reaction rate and order were measured to transparent the involvement of the reagents during catalysis. Control experiments elucidated the plausible reaction mechanisms.

Fluorescent coumarin-alkynes for labeling of amino acids and peptides via manganese(I)-catalyzed C-H alkenylation

The late-stage fluorescent labeling of structurally complex peptides bears immense potential for molecular imaging. Herein, we report on a manganese(I)-catalyzed peptide C-H alkenylation under exceedingly mild conditions with natural fluorophores as coumarin- and chromone-derivatives. The robustness and efficiency of the manganese(I) catalysis regime was reflected by a broad functional group tolerance and low catalyst loading in a resource- and atom-economical fashion.

Efficient and chemoselective imine synthesis catalyzed by a well-defined PN3-manganese(II) pincer system

The highly efficient reductive amination of aldehydes with ammonia (NH3) and hydrogen (H2) to form secondary imines is described, as well as the dehydrogenative homocoupling of benzyl amines. Using an air-stable, well-defined PN3-manganese(II) pincer complex as a catalyst precursor, various aldehydes are easily converted directly into secondary imines using NH3 as a nitrogen source under H2 in a one-pot reaction. Importantly, the same catalyst facilitates the dehydrogenative homocoupling of various benzylamines, exclusively forming imine products. These reactions are conducted under very mild conditions, without the addition of any additives, yielding excellent selectivities and high yields of secondary imines in a green manner by minimizing wastes.

Late-stage peptide labeling with near-infrared fluorogenic nitrobenzodiazoles by manganese-catalyzed C-H activation

Late-stage diversification of structurally complex amino acids and peptides provides tremendous potential for drug discovery and molecular imaging. Specifically, labeling peptides with fluorescent tags is one of the most important methods for visualizing their mode of operation. Despite major recent advances in the field, direct molecular peptide labeling by C-H activation is largely limited to dyes with relatively short emission wavelengths, leading to high background signals and poor signal-to-noise ratios. In sharp contrast, here we report on the fluorescent labeling of peptides catalyzed by non-toxic manganese(i) via C(sp²)-H alkenylation in chemo- and site-selective manners, providing modular access to novel near-infrared (NIR) nitrobenzodiazole-based peptide fluorogenic probes.

Redox-neutral C-H annulation strategies for the synthesis of heterocycles via high-valent Cp*Co(III) catalysis

A variety of biologically active molecules, pharmaceuticals, and natural products consist of a nitrogen-containing heterocyclic backbone. The majority of them are isoquinolones, indoles, isoquinolines, etc.; thereby the synthesis and derivatization of such heterocycles are synthetically very relevant. Also, certain naphthol derivatives have high synthetic utility as agrochemicals and in dye industries. Previous approaches have utilized ruthenium, rhodium, or iridium which may not be desirable due to the high toxicity, low abundance, and high cost of such 4d and 5d metals. Moreover, the need for an external oxidant during the reaction also adds by-products to the system. A high-valent cobalt-catalyzed redox-neutral C-H functionalization strategy has emerged to be a far better alternative in this regard. The use of the non-noble metal cobalt allows for selectivity and specificity in product formation. Also, the redox-neutral concept avoids the use of an external oxidant either due to the presence of a metal in a non-variable oxidation state throughout the catalytic cycle or due to the presence of an oxidizing directing group or an oxidizing coupling partner. Such an oxidizing directing group not only directs the catalyst to a specific reaction site by chelation but also regenerates the catalyst at the end of the cycle. Certain bonds such as N-O, N-N, N-Cl, N-S, and C-S are the main game-players behind the oxidizing property of such directing groups. In the other case, the directing group only chelates the catalyst to a reaction center, whereas the oxidation is carried out by the upcoming group/coupling partner. Overall, merging the redox-neutral concept with the high-valent cobalt catalysis is paving the way forward toward a sustainable and environmentally friendly approach. This review critically describes the mechanistic understanding, scope, limitations, and synthesis of various biologically relevant heterocycles via the redox-neutral concept in the high-valent Cp*Co(III)-catalyzed C-H functionalization chemistry domain.

A manganese(i)tricarbonyl-catalyst for near room temperature alkene and alkyne hydroarylation

Developing more efficient catalytic processes using abundant and low toxicity transition metals is key to enable their mainstream use in synthetic chemistry. We have rationally designed a new Mn(i)-catalyst for hydroarylation reactions that displays much improved catalytic activity over the commonly used MnBr(CO)5. Our catalyst, MnBr(CO)3(MeCN)2, avoids the formation of the off-cycle manganacycle-(CO)4 species responsible for low catalyst activity, allowing near room temperature hydroarylation of alkenes and alkynes with broad functional group tolerance including late stage functionalisation and diversification of bioactive molecules.

Manganese-catalyzed hydrogenation, dehydrogenation, and hydroelementation reactions

The emerging field of organometallic catalysis has shifted towards research on Earth-abundant transition metals due to their ready availability, economic advantage, and novel properties. In this case, manganese, the third most abundant transition-metal in the Earth's crust, has emerged as one of the leading competitors. Accordingly, a large number of molecularly-defined Mn-complexes has been synthesized and employed for hydrogenation, dehydrogenation, and hydroelementation reactions. In this regard, catalyst design is based on three pillars, namely, metal-ligand bifunctionality, ligand hemilability, and redox activity. Indeed, the developed catalysts not only differ in the number of chelating atoms they possess but also their working principles, thereby leading to different turnover numbers for product molecules. Hence, the critical assessment of molecularly defined manganese catalysts in terms of chelating atoms, reaction conditions, mechanistic pathway, and product turnover number is significant. Herein, we analyze manganese complexes for their catalytic activity, versatility to allow multiple transformations and their routes to convert substrates to target molecules. This article will also be helpful to get significant insight into ligand design, thereby aiding catalysis design.

Manganese-Catalyzed C(sp2)-H Alkylation of Indolines and Arenes with Unactivated Alkyl Bromides

Selective C(sp 2 ) - H bond alkylation of indoline, carbazole and (2-pyridinyl)arenes with unactivated alkyl bromides is achieved using MnBr 2 catalyst in the absence of an external ligand. The alkylation uses a simple LiHMDS base and avoids the necessity of Grignard reagent, unlike other Mn-catalyzed C - H functionalization. This reaction proceeded either through a five- or a less-favored six-membered metallacycle, and tolerated diverse functionalities, including alkenyl, alkynyl, silyl, aryl ether, pyrrolyl, indolyl, carbazolyl and alkyl bearing fatty alcohol and polycyclic-steroid moieties. Alkylation follows a single electron transfer (SET) pathway involving 1e oxidative addition of alkyl bromide and a rate-limiting C-H metalation.

One-step synthesis of indolizino[3,4,5-ab]isoindoles by manganese(I)-catalyzed C-H activation: structural studies and photophysical properties

Herein, a regioselective synthesis of indolizino[3,4,5-ab]isoindoles, a valuable class of heterocycles with interesting luminescence properties, is described using manganese(I)-catalyzed C-H activation. The reported transformation proceeds in one-step and employs readily available 2-phenylpyridines as starting materials. Furthermore, the obtained single products exhibit blue-greenish fluorescence with high quantum yields.

MnSO4-Promoted S-O Bond Cleavage to Synthesize Functionalized Sulfonium Ylides from Activated Alkynes and Sulfoxides

A variety of functionalized sulfonium ylides were prepared in good yields through MnSO4-promoted S-O bond cleavage from activated alkynes and sulfoxides. Experimental results showed that MnSO4-catalyst played important roles to...

Mechanism and origin of the stereoselectivity of manganese-catalyzed hydrosilylation of alkynes: a DFT study

The mechanism and origin of the stereodivergent mononuclear Mn(CO)5Br and binuclear Mn2(CO)10 catalyzed hydrosilylation of alkynes have been investigated and compared.

Hydrosilylation of Aldehydes and Ketones Catalyzed by a 2-Iminopyrrolyl Alkyl-Manganese(II) Complex

A well-defined and very active single-component manganese(II) catalyst system for the hydrosilylation of aldehydes and ketones is presented. First, the reaction of 5-(2,4,6-iPr₃C₆H₂)-2-[N-(2,6-iPr₂C₆H₃)formimino]pyrrolyl potassium (KL) and [MnCl₂(Py)₂] afforded the binuclear 2-iminopyrrolyl manganese(II) pyridine chloride complex [Mn₂{κ²N,N'-5-(2,4,6-iPr₃C₆H₂)-NC₄H₂-2-C(H)═N(2,6-iPr₂C₆H₃)}₂(Py)₂(μ-Cl)₂] 1. Subsequently, the alkylation reaction of complex 1 with LiCH₂SiMe₃ afforded the respective (trimethylsilyl)methyl-Mn(II) complex [Mn{κ²N,N'-5-(2,4,6-iPr₃C₆H₂)-NC₄H₂-2-C(H)═N(2,6-iPr₂C₆H₃)}(Py)CH₂SiMe₃] 2 in a good yield. Complexes 1 and 2 were characterized by elemental analysis, ¹H NMR spectroscopy, Evans' method, FTIR spectroscopy, and single-crystal X-ray diffraction. While the crystal structure of complex 1 has been identified as a binuclear entity, in which the Mn(II) centers present pentacoordinate coordination spheres, that of complex 2 corresponds to a monomer with a distorted tetrahedral coordination geometry. Complex 2 proved to be a very active precatalyst for the atom-economic hydrosilylation of several aldehydes and ketones under very mild conditions, with a maximum turnover frequency of 95 min^-1, via a silyl-Mn(II) mechanistic route, as asserted by a combination of experimental and theoretical efforts, the respective silanes were cleanly converted to the respective alcoholic products in high yields.

Manganese-Catalyzed [4 + 2] Annulation of N-H Amidines with Vinylene Carbonate via C-H Activation

Manganese-catalyzed C-H bond functionalization of aryl amidines for the synthesis of 1-aminoisoquinolines in the presence of vinylene carbonate has been developed. The reaction features a broad substrate scope and proceeds under mild reaction conditions with only the carbonate anion as the byproduct.

Advancements in multifunctional manganese complexes for catalytic hydrogen transfer reactions

Catalytic hydrogen transfer reactions have enormous academic and industrial applications for the production of diverse molecular scaffolds. Over the past few decades, precious late transition-metal catalysts were employed for these reactions. The early transition metals have recently gained much attention due to their lower cost, less toxicity, and overall sustainability. In this regard, manganese, which is the third most abundant transition metal in the Earth's crust, has emerged as a viable alternative. However, the key to the success of such manganese-based complexes lies in the multifunctional ligand design and choice of appropriate ancillary ligands, which helps them mimic and, even in some cases, supersede noble metals' activities. The metal-ligand bifunctionality, achieved via deprotonation of the acidic C-H or N-H bonds, is one of the powerful strategies employed for this purpose. Alongside, the ligand hemilability in which a weakly chelating group tunes in between the coordinated and uncoordinated stages could effectively stabilize the reactive intermediates, thereby facilitating substrate activation and catalysis. Redox non-innocent ligands acting as an electron sink, thereby helping the metal center in steps gaining or losing electrons, and non-classical metal-ligand cooperativity has also played a significant role in the ligand design for manganese catalysis. The strategies were not only employed for the chemoselective hydrogenation of different reducible functionalities but also for the C-X (X = C/N) coupling reactions via HT and downstream cascade processes. This article features multifunctional ligand-based manganese complexes, highlighting the importance of ligand design and choice of ancillary ligands for achieving the desired catalytic activity and selectivity for HT reactions. We have also discussed the detailed reaction pathways for metal complexes involving bifunctionality, hemilability, redox activity, and indirect metal-ligand cooperativity. The synthetic utilization of those complexes in different organic transformations has also been detailed.

The Role of Sulphonamides and N-Sulphonyl Ketimines/Aldimines as Directing Groups in the Field of C-H Activation

Sulphonamides and N-sulphonyl ketimines/aldimines have turned out to be versatile motifs in the field of synthetic and medicinal chemistry. The field of C-H activation/functionalization flourished remarkably due to their synthetic applicability and directing group plays a remarkable role to achieve regioselectivity in these reactions. The current review summarizes recent tactics by utilizing sulphonamides and N-sulphonyl ketimines/aldimines as directing groups for C-H activation or functionalization. As a directing group, they also facilitate site selectivity and late-stage functionalization of drug molecules in order to construct complex scaffolds of therapeutic importance by C-H activation.

Cobalt(III)-Catalyzed Regioselective C6 Olefination of 2-Pyridones Using Alkynes: Olefination/Directing Group Migration and Olefination

Co(III)-catalyzed highly regio- and stereoselective direct C6 olefination of 2-pyridones with alkynes has been developed with the assistance of chelation. Upon variation of the reaction conditions, 2-pyridones react well with diaryl alkynes via a C6 olefination/directing group migration pathway to give the tetrasubstituted 6-vinyl-2-pyridones, but the C6-H olefination with terminal alkynes works effectively to afford only the C6-olefinated 2-pyridones. A judicious choice of a solvent and an additive is crucial for catalysis. The protocols feature 100% atom economy, excellent site selectivity, high stereoselectivity, an ample substrate scope, and good compatibility of functional groups. Synthetic applications are demonstrated, and experimental studies and density functional theory calculations are conducted to gain mechanistic insight into the two transformations.

Rh(III)-Catalyzed olefination to build diverse oxazole derivatives from functional alkynes

A novel Rh(iii)-catalyzed olefination reaction of oxazoles to generate diverse oxazole skeleton derivatives has been realized by directly using oxazole as the directing group. The reaction could tolerate many functional groups, affording complex oxazole derivatives with long chain alkenyls in moderate to good yields, which might find applications in the construction of diverse compounds.

Rhodium(III)-Catalyzed C-H Bond Functionalization of 2-Pyridones with Alkynes: Switchable Alkenylation, Alkenylation/Directing Group Migration and Rollover Annulation

Cp*Rh(III)-catalyzed chelation-assisted direct C-H bond functionalization of 1-(2-pyridyl)-2-pyridones with internal alkynes that can be controlled to give three different products in good yields has been realized. Depending on the reaction conditions, solvents and additives, the reaction pathway can be switched between alkenylation, alkenylation/directing group migration and rollover annulation. These reaction manifolds allow divergent access to a variety of valuable C6-alkenylated 1-(2-pyridyl)-2-pyridones, (Z)-6-(1,2-diaryl-2-(pyridin-2-yl)vinyl)pyridin-2(1H)-ones and 10H-pyrido[1,2-a][1,8]naphthyridin-10-ones from the same starting materials. These protocols exhibit excellent regio- and stereoselectivity, broad substrate scope, and good tolerance of functional groups. A combination of experimental and computational approaches have been employed to uncover the key mechanistic features of these reactions.

Iron-Catalyzed Ortho C-H Homoallylation of Aromatic Ketones with Methylenecyclopropanes

We report here a C-H homoallylation reaction of aromatic ketones with methylenecyclopropanes (MCPs) only using a catalytic amount of Fe(PMe₃)₄. A variety of aromatic ketones and MCPs are applicable to the reaction to form ortho-homoallylated aromatic ketones selectively via regioselective scission of the three-membered rings. The homoallylated products are amenable to further elaborations, providing functionalized 1,2-dihydronaphthalenes.

Manganese-Catalyzed C(sp2)–H Addition to Polar Unsaturated Bonds

Transition-metal-catalyzed nucleophilic C–H addition of hydrocarbons to polar unsaturated bonds could intrinsically avoid prefunctionalization of substrates and formation of waste byproducts, thus featuring high step- and atom-economy. As the third most abundant transition metal, manganese-catalyzed C–H addition to polar unsaturated bonds remains challenging, partially due to the difficulty in building a closed catalytic cycle of manganese. In the past few years, we have developed manganese catalysis to enable the sp2-hydrid C–H addition to polar unsaturated bonds (e.g., imines, aldehydes, nitriles), which will be discussed in this personal account.

1 Introduction

2 Mn-Catalyzed N-Directed C(sp2)–H Addition to Polar Unsaturated Bonds

3 Mn-Catalyzed O-Directed C(sp2)–H Addition to Polar Unsaturated Bonds

4 Conclusion

Alkynoates as Versatile and Powerful Chemical Tools for the Rapid Assembly of Diverse Heterocycles under Transition-Metal Catalysis: Recent Developments and Challenges

Heterocycles, heteroaromatics and spirocyclic entities are ubiquitous components of a wide plethora of synthetic drugs, biologically active natural products, marketed pharmaceuticals and agrochemical targets. Recognizing their high proportion in drugs and rich pharmacological potential, these invaluable structural motifs have garnered significant interest, thus enabling the development of efficient catalytic methodologies providing access to architecturally complex and diverse molecules with high atom-economy and low cost. These chemical processes not only allow the formation of diverse heterocycles but also utilize a range of flexible and easily accessible building units in a single operation to discover diversity-oriented synthetic approaches. Alkynoates are significantly important, diverse and powerful building blocks in organic chemistry due to their unique and inherent properties such as the electronic bias on carbon-carbon triple bonds posed by electron-withdrawing groups or the metallic coordination site provided by carbonyl groups. The present review highlights the comprehensive picture of the utility of alkynoates (2007-2019) for the synthesis of various heterocycles (> 50 types) using transition-metal catalysts (Ru, Rh, Pd, Ir, Ag, Au, Pt, Cu, Mn, Fe) in various forms. The valuable function of versatile alkynoates (bearing multifunctional groups) as simple and useful starting materials is explored, thus cyclizing with an array of coupling partners to deliver a broad range of oxygen-, nitrogen-, sulfur-containing heterocycles alongside fused-, and spiro-heterocyclic compounds. In addition, these examples will also focus the scope and reaction limitations, as well as mechanistic investigations into the synthesis of these heterocycles. The biological significance will also be discussed, citing relevant examples of drug molecules highlighting each class of heterocycles. This review summarizes the recent developments in the synthetic methods for the synthesis of various heterocycles using alkynoates as readily available starting materials under transition-metal catalysis.

Manganese catalyzed C-alkylation of methyl N-heteroarenes with primary alcohols

C-Alkylations of nine different classes of methyl-substituted N-heteroarenes are disclosed using a bench stable Mn(i)-catalyst under borrowing hydrogen conditions.

Mn(ii)-Catalysed ortho-alkenylation of aromatic amines and its application in reproductive diseases

A Mn(ii)-catalysed ortho-alkenylation of aromatic amines and its application in reproductive diseases were developed. The use of MnCl₂ was critical for the ortho-alkenylation of aromatic amines. The general applicability of this procedure was highlighted by the synthesis of 27 vinylanilines, with good regioselectivities. The value of our approach in practical applications was investigated by studying the effects of one of the compounds 3m on 8 week-old adult male rats with azoospermia as a mammalian model. The results show that a small amount of sperm will gradually be produced in the epididymis and testes by treatment of 8 week-old adult male rats with azoospermia with 1 mg kg⁻¹3m after two weeks, while treatment with 10 mg kg⁻¹3m led to obvious sperm production. Notably, if we increase the dose to 100 mg kg⁻¹, there will be a lot of sperm production in the epididymis and testes after two weeks of treatment. The results of this study will be of great significance in research on drugs for treating azoospermia and oligospermia diseases.

A Mn(ii)-catalysed ortho-alkenylation of aromatic amines and its application in reproductive diseases were developed.

Hydrosilylation of Esters Catalyzed by Bisphosphine Manganese(I) Complex: Selective Transformation of Esters to Alcohols

Selective and efficient hydrosilylations of esters to alcohols by a well-defined manganese(I) complex with a commercially available bisphosphine ligand are described. These reactions are easy alternatives for stoichiometric hydride reduction or hydrogenation, and employing cheap, abundant, and nonprecious metal is attractive. The hydrosilylations were performed at 100 °C under solvent-free conditions with low catalyst loading. A large variety of aromatic, aliphatic, and cyclic esters bearing different functional groups were selectively converted into the corresponding alcohols in good yields.

Mn(i)-Catalyzed nucleophilic addition/ring expansion via C–H activation and C–C cleavage

The Mn(i)-Catalyzed C–H alkenylation/carbonyl addition/retro-Aldol cascade was realized leading to the convenient synthesis of seven- or eight-membered carbocycles.