Transition Metal (Fe, Co and Ni)−Carbide−Nitride (M−C−N) Nanocatalysts: Structure and Electrocatalytic Applications

Unraveling the Synergistic Role of Sm3+ Doped NiFe-LDH as High-Performance Electrocatalysts for Improved Anion Exchange Membrane and Water Splitting Applications

Effective first-row transition metal-based electrocatalysts are crucial for large-scale hydrogen energy generation and anion exchange membrane (AEM) devices in water splitting. The present work describes that SmNi0.02Fe-LDH nanosheets on nickel foam are used as a bifunctional electrocatalyst for water splitting and AEM water electrolyzer study. Tuning the Ni-to-Fe ratios in NiFe-LDH and doping with Sm ions improves the electrical structure and intrinsic activity. SmNi0.02Fe-LDH has higher oxygen evolution reaction (OER), HER, and TWS activity, achieving 10 mA cm⁻2 current density at lower overpotentials (230 mV, 95 mV, and 1.62 V, respectively). In AEMWE cells, SmNi0.02Fe-LDH as a cathode and anode pair exhibits outstanding activity (0.9 A cm⁻2 at 2 V) and stability over 120 h. Density Functional Theory (DFT) investigations reveal that the Sm doping in NiFe-LDH surface enhances its bifunctional activity toward OER and HER. These findings emphasize the potential of non-noble composites for long-term water electrolysis in total water splitting and AEMWE applications.

Iron Triad-Based Bimetallic M-N-C Nanomaterials as Highly Active Bifunctional Oxygen Electrocatalysts

The use of precious metal electrocatalysts in clean electrochemical energy conversion and storage applications is widespread, but the sustainability of these materials, in terms of their availability and cost, is constrained. In this research, iron triad-based bimetallic nitrogen-doped carbon (M-N-C) materials were investigated as potential bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The synthesis of bimetallic FeCo-N-C, CoNi-N-C, and FeNi-N-C catalysts involved a precisely optimized carbonization process of their respective metal-organic precursors. Comprehensive structural analysis was undertaken to elucidate the morphology of the prepared M-N-C materials, while their electrocatalytic performance was assessed through cyclic voltammetry and rotating disk electrode measurements in a 0.1 M KOH solution. All bimetallic catalyst materials demonstrated impressive bifunctional electrocatalytic performance in both the ORR and the OER. However, the FeNi-N-C catalyst proved notably more stable, particularly in the OER conditions. Employed as a bifunctional catalyst for ORR/OER within a customized zinc-air battery, FeNi-N-C exhibited a remarkable discharge-charge voltage gap of only 0.86 V, alongside a peak power density of 60 mW cm-2. The outstanding stability of FeNi-N-C, operational for about 55 h at 2 mA cm-2, highlights its robustness for prolonged application.

Transition metal-based electrocatalysts for alkaline overall water splitting: advancements, challenges, and perspectives

Water electrolysis is a promising method for efficiently producing hydrogen and oxygen, crucial for renewable energy conversion and fuel cell technologies. The hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are two key electrocatalytic reactions occurring during water splitting, necessitating the development of active, stable, and low-cost electrocatalysts. Transition metal (TM)-based electrocatalysts, spanning noble metals and TM oxides, phosphides, nitrides, carbides, borides, chalcogenides, and dichalcogenides, have garnered significant attention due to their outstanding characteristics, including high electronic conductivity, tunable valence electron configuration, high stability, and cost-effectiveness. This timely review discusses developments in TM-based electrocatalysts for the HER and OER in alkaline media in the last 10 years, revealing that the exposure of more accessible surface-active sites, specific electronic effects, and string effects are essential for the development of efficient electrocatalysts towards electrochemical water splitting application. This comprehensive review serves as a guide for designing and constructing state-of-the-art, high-performance bifunctional electrocatalysts based on TMs, particularly for applications in water splitting.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Stabilization of transition metal heterojunctions inside porous materials for high-performance catalysis

Transition metal-based heterostructural materials are a class of very promising substitutes for noble metal-based catalysts for high-performance catalysis, due to their inherent internal electric field at the interface in the heterojunctions, which could induce electron relocalization and facilitate charge carrier migration between different metal sites at heterostructural boundaries. However, redox-active metal species suffer from reduction, oxidation, migration, aggregation, leaching and poisoning in catalysis, which results in heavy deterioration of the catalytic properties of transition metal-based heterojunctions and frustrates their practical applications. To improve the stability of transition metal-based heterojunctions and sufficiently expose redox-active sites at the heterosurfaces, many kinds of porous materials have been used as porous hosts for the stabilization of non-precious metal heterojunctions. This review article will discuss recently developed strategies for encapsulation and stabilization of transition metal heterojunctions inside porous materials, and highlight their improved stability and catalytic performance through the spatial confinement effect and synergistic interaction between the heterojunctions and the host matrices.

Highly exposed surface pore-edge FeNx sites for enhanced oxygen reduction performance in Zn-air batteries

Atomically dispersed pore-edge FeNx sites anchored on porous carbon exhibit excellent activity and stability towards ORR. The assembled Zn-air battery presents a high peak power density (150 mW cm−2) and long-cycle stability (450 h).

Recent Progress of Diatomic Catalysts: General Design Fundamentals and Diversified Catalytic Applications

In recent years, some experiments and theoretical work have pointed out that diatomic catalysts not only retain the advantages of monoatomic catalysts, but also introduce a variety of interactions, which exceed the theoretical limit of catalytic performance and can be applied to many catalytic fields. Here, the interaction between adjacent metal atoms in diatomic catalysts is elaborated: synergistic effect, spacing enhancement effect (geometric effect), and electronic effect. With regard to the classification and characterization of various new diatomic catalysts, diatomic catalysts are classified into four categories: heteronuclear/homonuclear, with/without carbon carriers, and their characterization measures are introduced and explained in detail. In the aspect of preparation of diatomic catalysts, the widely used atomic layer deposition method, metal-organic framework derivative method, and simple ball milling method are introduced, with emphasis on the formation mechanism of diatomic catalysts. Finally, the effective control strategies of four diatomic catalysts and the key applications of diatomic catalysts in electrocatalysis, photocatalysis, thermal catalysis, and other catalytic fields are given.

A Single Source, Scalable Route for Direct Isolation of Earth-Abundant Nanometal Carbide Water-Splitting Electrocatalysts

Single-phase M_xCs (M = Fe, Co, and Ni) were prepared by solvothermal conversion of Prussian blue single source precursors. The single source precursor is prepared in water, and the conversion process is carried out in alkylamines at reaction temperatures above 200 °C. The reaction is scalable using a commercial source of Fe-PB. High-resolution transmission electron microscopy, X-ray photoelectron microscopy, and powder X-ray diffraction confirm that carbides have thin oxide termination but lack graphitic surfaces. Electrocatalytic activity reveals that Fe₃C and Co₂C are oxygen evolution reaction electrocatalysts, while Ni₃C is a bifunctional [OER and hydrogen evolution reaction (HER)] electrocatalyst.

Utilizing waste duckweed from phytoremediation to synthesize highly efficient FeNxC catalysts for oxygen reduction reaction electrocatalysis

Duckweed is a universal aquatic plant to remove nitrogen source pollutants in the field of phytoremediation. Due to the naturally abundant nitrogen, synthesis of carbon materials from duckweed would be a high-value approach. In oxygen reduction reaction (ORR) of metal-air batteries and fuel cells, non-noble metals and heteroatoms co-doped electrocatalysts with excellent catalytic activity and remarkable stability are promising substitutes for Pt-based catalysts. The first-class ORR performance is determined by appropriate pore structure and active sites, which are strongly associated with the feasible synthesis methods. Herein, a facile one-step synthesis strategy for the transition metals- and nitrogen-codoped carbon (MN_xC) based catalysts with hierarchically porous structure was developed. The MN_xC (M = Fe, Co, Ni, and Mn) active sites were constructed and FeN_xC (D-ZB-Fe) was the best electrocatalyst with excellent ORR performance. Results showed that D-ZB-Fe exhibited an obvious honeycomb porous structure with specific surface area of 1342.91 m²·g^-1 and total pore volume of 1.085 cm³·g^-1. It also possessed considerable active atoms and sites, where the proportion of pyridine N and graphite N was up to 72.9%. The above feature made for a superior ORR electrocatalytic activity. In specific, the onset and half-wave potential were 0.974 V and 0.857 V vs. RHE (Reversible Hydrogen Electrode), respectively. When compared with performances of commercial Pt/C, the four-electron pathway and relatively low peroxide yield, ca. 5%, were almost equivalent. Furthermore, D-ZB-Fe showed an excellent stability and remarkably methanol tolerance by the durability test. In conclusion, this research provides a new synthesis strategy of electrocatalysts with porous structures and active sites.

Impacts of Metal-Support Interaction on Hydrogen Evolution Reaction of Cobalt-Nitride-Carbide Catalyst

Cobalt-nitride-carbide (Co-N-C) catalysts are promising cost-efficient transition metal catalysts for electrocatalytic hydrogen evolution, but few works investigate the metal-support interaction (MSI) effect on hydrogen evolution reaction (HER) performance. Herein, efficient Co-N-CX catalysts with controllable MSI between encapsulated Co nanoparticles and nitrogen-doped graphitic carbon nanosheets were synthesized via a facile organic-inorganic hybridization method. Results demonstrate that the Co-N-C0.025M catalyst with the coexistence of single-atom Co sites and Co nanoparticles prepared by 0.025 M cobalt nitrate shows excellent HER performance, achieving a low overpotential of 145 mV to reach 10 mA cm-2 in 0.5 M sulfuric acid, which is mainly because the optimal MSI, which leads to a moderate hydrogen adsorption energy and improved electroactive sites, not only facilitates the charge transfer to improve the HER kinetics, but also improves the durability of the catalyst by Co-N bond anchoring and encapsulation of active Co species. This work provides guidance to further reveal the influence of MSI on their catalytic activity.

Optimizing Hydrogen Binding on Ru Sites with RuCo Alloy Nanosheets for Efficient Alkaline Hydrogen Evolution

Ruthenium (Ru)-based catalysts, with considerable performance and desirable cost, are becoming highly interesting candidates to replace platinum (Pt) in the alkaline hydrogen evolution reaction (HER). The hydrogen binding at Ru sites (Ru-H) is an important factor limiting the HER activity. Herein, density functional theory (DFT) simulations show that the essence of Ru-H binding energy is the strong interaction between the 4 d z 2 orbital of Ru and the 1s orbital of H. The charge transfer between Ru sites and substrates (Co and Ni) causes the appropriate downward shift of the 4 d z 2 -band center of Ru, which results in a Gibbs free energy of 0.022 eV for H* in the RuCo system, much lower than the 0.133 eV in the pure Ru system. This theoretical prediction has been experimentally confirmed using RuCo alloy-nanosheets (RuCo ANSs). They were prepared via a fast co-precipitation method followed with a mild electrochemical reduction. Structure characterizations reveal that the Ru atoms are embedded into the Co substrate as isolated active sites with a planar symmetric and Z-direction asymmetric coordination structure, obtaining an optimal 4 d z 2 modulated electronic structure. Hydrogen sensor and temperature program desorption (TPD) tests demonstrate the enhanced Ru-H interactions in RuCo ANSs compared to those in pure Ru nanoparticles. As a result, the RuCo ANSs reach an ultra-low overpotential of 10 mV at 10 mA cm-2 and a Tafel slope of 20.6 mV dec-1 in 1 M KOH, outperforming that of the commercial Pt/C. This holistic work provides a new insight to promote alkaline HER by optimizing the metal-H binding energy of active sites.

Temperature-Controlled Structural Variations of Meticulous Fibrous Networks of NiFe-Polymeric Zeolite Imidazolate Frameworks for Enhanced Performance in Electrocatalytic Water-Splitting Reactions

Developing non-noble, earth-ample, and stable electrocatalysts are highly anticipated in oxygen-evolution reaction (OER) and hydrogen-evolution reaction (HER) at unique pH conditions. Herein, we have synthesized bimetallic (nickel and iron) zeolite imidazolate framework (ZIF)-based nanofibrous materials via a simple electrospinning (ES) process. The structural stability of the fibrous material is subjected to various calcination conditions. We have elaborated the structural importance of the one-dimensional (1D) fibrous materials in electrocatalytic water-splitting reactions. As a result, NiFe-ZIF-NFs (Nanofibers)-RT (Room Temperature) have delivered a small overpotential of 241 mV at 10 mA cm^-2 current density in OER and 290 mV at a fixed current density of 50 mA cm^-2 in HER at two different pH conditions with 1 M KOH and 0.5 M H₂SO₄, respectively. Furthermore, it exposes the actual surface area of 27.270 m² g^-1 and a high electrochemical active surface area (ECSA) of 50 μF in OER and 55 μF in HER, which is responsible for the electrochemical performance with better stability. This exceptional activity of the materials is mainly attributed to the structural dependency of the fibrous network through the polymeric architecture.

Origin of the electrocatalytic oxygen evolution activity of nickel phosphides: in-situ electrochemical oxidation and Cr doping to achieve high performance

Zinc-air batteries (ZnABs) with high theoretical capacity and environmental benignity are the most promising candidates for next-generation electronics. However, their large-scale applications are greatly hindered due to the lack of high-efficient and cost-effective electrocatalysts. Transition metal phosphides (TMPs) have been reported as promising electrocatalysts. Notably, (Ni_1-xCr_x)₂P (0 ≤ x ≤ 0.15) is an unstable electrocatalyst, which undergoes in-situ electrochemical oxidation during the initial oxygen evolution reaction (OER) and even in the activation cycles, and is eventually converted to Cr-NiOOH serving as the actual OER active sites with high efficiency. Density functional theory (DFT) simulations and experimental results elucidate that the OER performance could be significantly promoted by the synergistic effect of surface engineering and electronic modulations by Cr doping and in-situ phase transformation. The constructed rechargeable ZnABs could stably cycle for more than 208 h at 5 mA cm^-2, while the voltage degradation is negligible. Furthermore, the developed catalytic materials could be assembled into flexible and all-solid-state ZnABs to power wearable electronics with high performance.

A Co-MOF-derived Co9S8@NS-C electrocatalyst for efficient hydrogen evolution reaction

The exploitation of efficient hydrogen evolution reaction (HER) electrocatalysts has become increasingly urgent and imperative; however, it is also challenging for high-performance sustainable clean energy applications. Herein, novel Co9S8 nanoparticles embedded in a porous N,S-dual doped carbon composite (abbr. Co9S8@NS-C-900) were fabricated by the pyrolysis of a single crystal Co-MOF assisted with thiourea. Due to the synergistic benefit of combining Co9S8 nanoparticles with N,S-dual doped carbon, the composite showed efficient HER electrocatalytic activities and long-term durability in an alkaline solution. It shows a small overpotential of -86.4 mV at a current density of 10.0 mA cm-2, a small Tafel slope of 81.1 mV dec-1, and a large exchange current density (J 0) of 0.40 mA cm-2, which are comparable to those of Pt/C. More importantly, due to the protection of Co9S8 nanoparticles by the N,S-dual doped carbon shell, the Co9S8@NS-C-900 catalyst displays excellent long-term durability. There is almost no decay in HER activities after 1000 potential cycles or it retains 99.5% of the initial current after 48 h.

Emerging One-/Two-Dimensional Heteronanostructure Integrating SiC Nanowires with MoS2 Nanosheets for Efficient Electrocatalytic Hydrogen Evolution

MoS₂ has emerged as a good application prospect in the electrocatalytic hydrogen evolution reaction (HER). Nevertheless, the catalytic activity of MoS₂ is greatly restricted by its inferior electrical conductivity, inadequate exposure of active edge sites, and sluggish water dissociation dynamics. Herein, a 1D/2D heteronanostructure composed of SiC nanowires wrapped with MoS₂ nanosheets was prepared via the hydrothermal synthesis of MoS₂ on highly connected SiC nanowires (SiCnw). The nanocomposites exhibit an emerging tectorum-like morphology with interface connections of C-Mo bonds, which benefit the efficient interfacial transmission of electrons. Due to the synergetic catalytic effects of MoS₂ nanosheets and SiC nanowires, the MoS₂/SiCnw nanocomposites possess efficient catalytic performance with a low Tafel slope (55 mV/dec). SiC nanocrystals could reduce the activated water dissociation energy barrier, and the morphologies of connected nanowires could improve the active site exposure and charge transport. The nanocomposites possess favorable hydrogen adsorption free energy from density functional theory (DFT) calculations. The electrocatalytic performance of MoS₂/SiCnw nanocomposites could be further improved by assembling the nanocomposites on a carbon fiber paper to enhance the electronic transmission efficiency.

A nickel molybdenum oxide nanoarray as an efficient and stable electrocatalyst for overall water splitting

Experimental and DFT calculation results show that the presence of oxygen vacancies can decrease the adsorption energy of intermediates at active sites and facilitate their adsorption, thus improving the catalytic properties.

Ge-Modified GaN–ZnO wurtzite solid solutions with high Zn content for efficient photocatalytic H2 evolution from water under visible light illumination

A new intermediate, Zn₂GeO₄, forms during synthesis of Ge-modified GaN–ZnO wurtzite solid solutions and results in high Zn content in the product.