Effect of Ordered Mesoporous Alumina Support on the Structural and Catalytic Properties of Mn−Ni/OMA Catalyst for NH 3 −SCR Performance at Low‐temperature

Research progress of Mn-based low-temperature SCR denitrification catalysts

Selective catalytic reduction (SCR) is a efficiently nitrogen oxides removal technology from stationary source flue gases. Catalysts are key component in the technology, but currently face problems including poor low-temperature activity, narrow temperature windows, low selectivity, and susceptibility to water passivation and sulphur dioxide poisoning. To develop high-efficiency low-temperature denitrification activity catalyst, manganese-based catalysts have become a focal point of research globally for low-temperature SCR denitrification catalysts. This article investigates the denitrification efficiency of unsupported manganese-based catalysts, exploring the influence of oxidation valence, preparation method, crystallinity, crystal form, and morphology structure. It examines the catalytic performance of binary and multicomponent unsupported manganese-based catalysts, focusing on the use of transition metals and rare earth metals to modify manganese oxide. Furthermore, the synergistic effect of supported manganese-based catalysts is studied, considering metal oxides, molecular sieves, carbon materials, and other materials (composite carriers and inorganic non-metallic minerals) as supports. The reaction mechanism of low-temperature denitrification by manganese-based catalysts and the mechanism of sulphur dioxide/water poisoning are analysed in detail, and the development of practical and efficient manganese-based catalysts is considered.

Enhanced Hydrogenation of Levulinic Acid over Ordered Mesoporous Alumina-Supported Catalysts: Elucidating the Effect of Fabrication Strategy

In this work, three types of alumina-supported bimetallic Ni-Cu catalysts [Ni-Cu/commercial non-ordered mesoporous alumina (CMA), Ni-Cu/ordered MA (OMA), and Ni-Cu-OMA] were prepared via different fabrication strategies and investigated in the conversion of levulinic acid (LA) into γ-valerolactone and 2-methyltetrahydrofuran (2-MTHF). This study employed characterization techniques and reactions to reveal the effects of the fabrication strategy on the activities of the catalysts. It was observed that the catalysts constructed on OM supports (Ni-Cu/OMA and Ni-Cu-OMA) displayed superior catalytic performance compared to those constructed on CM supports (Ni-Cu/CMA). Specifically, Ni-Cu-OMA, which was fabricated via the one-pot evaporation-induced self-assembly strategy, exhibited the best catalytic performance, achieving a complete conversion of LA and a high selectivity of 73.0 % toward 2-MTHF in a solvent-free reaction environment. The promising activity of Ni-Cu-OMA was ascribed to the well-dispersed active sites within the framework of the support, the enhanced metal-support interaction, and the highly efficient exploitation of the synergistic effect between Ni and Cu. Detailed post-characterization techniques were also employed to highlight the outstanding stability of Ni-Cu-OMA.

Tailor the crystal planes of MIL-101(Fe) derivatives to enhance the activity of SCR reaction at medium and low temperature

Mainly exposed crystal facets and controllable morphology play a key role in the final performance of the preparation of specific nanomaterials. In the present study, a metal-organic framework pyrolysis method without adding solvent modifiers was developed. By adding CO in the calcination atmosphere to change atmosphere ratio, Fe₃O₄ nanostructures are exposed with different crystal planes and evaluated their performance in NH₃-SCR reaction. This study proves that SCR catalytic activity of Fe₃O₄ nanocrystals is dependent on morphology and crystal facet. Compared with materials exposed (100), catalysts with more (111) show stronger deNO_x performance. The preferential exposure of Fe₃O₄ (111) crystal facets increases the concentration of adsorbed oxygen on the catalyst, showing higher surface acidity, and enhances the interaction among NO, O₂ and catalyst, which is conducive to SCR reaction. This is supported by DFT calculations. The results present a great application prospect in preparing nanomaterials with specific crystal structures to effectively treat pollutants.

Recent progress of low-temperature selective catalytic reduction of NOx with NH3 over manganese oxide-based catalysts

Selective catalytic reduction with NH3 (NH3−SCR) was the most efficient approach to mitigate the emission of nitrogen oxides (NOx). Although the conventional manganese oxide-based catalyst had gradually become a kind...

Unlocking active metal site of Ti-MOF for boosted heterogeneous catalysis via a facile coordinative reconstruction

Constructing sophisticated hollow structure and exposing more metal sites in metal-organic frameworks (MOFs) can not only enhance their catalytic performance but also endow them with new functions. Herein, we present a facile coordinative reconstruction strategy to transform Ti-MOF polyhedron into nanosheet-assembled hollow structure with a large amount of exposed metal sites. Importantly, the reconstruction process relies on the esterification reaction between the organic solvent, i.e. ethanol and the carboxylic acid ligand, allowing the conversion of MOF without the addition of any other modulators and/or surfactants. Moreover, the surface and internal structure of the reconstructed MOF can be well tuned via altering the conversion time. Impressively, the reconstructed MOF exhibits ∼5.1-fold rate constant compared to the pristine one in an important desulfurization reaction for clean fuels production, i.e. the oxidation of dibenzothiophene.