Recent Advances in Layered Tungsten Disulfide as Electrocatalyst for Water Splitting

Interfacial and Electronic Modulation of W Bridging Heterostructure Between WS2 and Cobalt-Based Compounds for Efficient Overall Water Splitting

The development of high performance electrocatalysts for effective hydrogen production is urgently needed. Herein, three hybrid catalysts formed by WS2 and Co-based metal-organic frameworks (MOFs) derivatives are constructed, in which the small amount of W in the MOFs derivatives acts as a bridge to provide the charge transfer channel and enhance the stability. In addition, the effects of the surface charge distribution on the catalytic performance are fully investigated. Due to the optimal interfacial electron coupling and rearrangement as well as its unique porous morphology, WS2 @W-CoPx exhibits superior bifunctional performance in alkaline media with low overpotentials in hydrogen evolution reaction (HER) (62 mV at 10 mA cm-2 ) and oxygen evolution reaction (OER) (278 mV at 100 mA cm-2 ). For overall water splitting (OWS), WS2 @W-CoPx only requires a cell voltage of 1.78 V at 50 mA cm-2 and maintains good stability within 72 h. Density functional theory calculations verify that the combination of W-CoPx with WS2 can effectively enhance the activity of OER and HER with weakened OH (or O) adsorption and enhanced H atom adsorption. This work provides a feasible idea for the design and practical application of WS2 or phosphide-based catalysts in OWS.

Cation-doped sea-urchin-like MnO2 for electrocatalytic overall water splitting

It is necessary to take full account of the activity, selectivity, dynamic performance, economic benefits, and environmental impact of the catalysts in the overall water splitting of electrocatalysis for the reasonable design of electrocatalysts. Designing nanostructures of catalysts and optimizing defect engineering are considered environmentally friendly and cost-effective electrocatalyst synthesis strategies. Herein, we report that metal cations regulate the microstructure of sea-urchin-like MnO2 and act as dopants to cause the lattice expansion of MnO2, resulting in crystal surface defects. The valence unsaturated Mn4+/Mn3+ greatly promotes the electrocatalytic oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The optimal Al-MnO2 showed that the overpotential is 390 and 170 mV in the process of catalyzing OER and HER, respectively, at a current density of 10 mA cm-2. It is exciting to note that after 5000 cycles of Al-MnO2 within the kinetic potential range of OER and HER, its performance remained almost unchanged. This work provides a simple, efficient, and environmentally friendly route for the design of efficient integrated water-splitting electrocatalysts.

Sonication strategy for anchoring single metal atom oxides (W, Cu, Co) on CeO2-rGO for boosting electrocatalytic oxygen evolution reaction

In the field of electrocatalysis, single-atomic-layer tungsten, copper, and cobalt oxide on CeO2, ethylene diamine (ED) and reduced graphene oxide (rGO) supported materials shows tremendous potential. Despite the enormous interest in single metal atom oxide (SMAO) catalysts, it is still very difficult to directly convert readily available bulk metal oxide into single atom oxide. It is crucial and tough to create high performance materials for the oxygen evolution reaction (OER) in an alkaline environment. Herein, a single tungsten, copper and cobalt atom oxide (SMAO) anchored on the CeO2 atomic layer and overall components deposited on the rGO (rGO-ED-CeO2-WCuCo) is prepared through a one-pot sonication technique. The presence of SMAO is identified by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) imaging. The electrocatalytic performance of final rGO-ED-CeO2-WCuCo-30 nanocomposite for the OER in 1 M KOH electrolyte is evidenced by providing low overpotential of 283 mV at 10 mA cm-2. The Tafel slope for OER using rGO-ED-CeO2-WCuCo-30 electrocatalysts is 57.03 mV dec-1. The electrocatalytic activity of rGO-ED-CeO2-WCuCo-30 nanocomposites for OER was noticeably increased when compared to bare CeO2 nanorods (401 mV), rGO-ED-CeO2-WCo-30 (345 mV), rGO-ED-CeO2-WCu-30 (340 mV) and rGO-ED-CeO2-WCuCo-20 (321 mV) samples.

NaCl template-assisted construction of a CoP-MoP heterostructured electrocatalyst for electrocatalytic nitrogen reduction

The electrocatalytic nitrogen reduction reaction (NRR) to ammonia is a promising technology to store renewable energy and mitigate greenhouse gas emissions. However, it usually suffers from low ammonia yield and selectivity because of the lack of efficient electrocatalysts. Herein, we report that the construction of metal phosphide heterojunctions is an efficient strategy for NRR activity enhancement. A CoP-MoP heterojunction electrocatalyst, which is fabricated by a facile NaCl template-assisted strategy, exhibits a favorable ammonia yield rate of 77.8 μg h-1 mgcat-1 (38.9 μg h-1 cm-2) and a high faradaic efficiency of 11.16% at -0.50 V versus the reversible hydrogen electrode. The high NRR electrocatalytic activity can be attributed to the electronic coupling effects and interfacial synergistic effects of CoP and MoP at the heterojunction interface, which accelerates the electron transfer rate. Moreover, Mo doping changes the d-band centers of metal sites on the CoP surface, which is conducive to N2 adsorption and promotes N2* adsorption in the competition of occupying active sites, thus inhibiting the HER. This work manifests the high potential of phosphide electrocatalysts and opens an alternative route toward NRR electrocatalysis.

Tungsten Disulfide-Interfacing Nickel-Porphyrin For Photo-Enhanced Electrocatalytic Water Oxidation

Covalent functionalization of tungsten disulfide (WS₂ ) with photo- and electro-active nickel-porphyrin (NiP) is reported. Exfoliated WS₂ interfacing NiP moieties with 1,2-dithiolane linkages is assayed in the oxygen evolution reaction under both dark and illuminated conditions. The hybrid material presented, WS₂ -NiP, is fully characterized with complementary spectroscopic, microscopic, and thermal techniques. Standard yet advanced electrochemical techniques, such as linear sweep voltammetry, electrochemical impedance spectroscopy, and calculation of the electrochemically active surface area, are used to delineate the catalytic profile of WS₂ -NiP. In-depth study of thin films with transient photocurrent and photovoltage response assays uncovers photo-enhanced electrocatalytic behavior. The observed photo-enhanced electrocatalytic activity of WS₂ -NiP is attributed to the presence of Ni centers coordinated and stabilized by the N₄ motifs of tetrapyrrole rings at the tethered porphyrin derivative chains, which work as photoreceptors. This pioneering work opens wide routes for water oxidation, further contributing to the development of non-noble metal electrocatalysts.

Djurleite Copper Sulfide-Coupled Cobalt Sulfide Interface for a Stable and Efficient Electrocatalyst

Transition metal sulfides (TMS) exhibit proliferated edge sites, facile electrode kinetics, and improved intrinsic electrical conductivity, which demand low potential requirements for total water splitting application. Here, we have propounded copper sulfide-coupled cobalt sulfide nanosheets grown on 3D nickel as an electrocatalyst for hydrogen (HER) and oxygen evolution (OER) reactions. The formation of djurleite copper sulfide with a Cu vacancy enables faster H⁺ ion transport and shows improved HER activity with a remarkably lower overpotential of 164 mV at 10 mA/cm², whereas cobalt-incorporated copper sulfide undergoes cation exchange during synthesis and shows elevated OER activity with a lower overpotential of 240 mV at 10 mA/cm² for the OER. Moreover, Cu_2-xS/Co is said to have a hybrid CoS-CoS₂ interface and provide Co²⁺ active sites on the surface and enable the fast adsorption of intermediate species (OH*, O*, and OOH*), which lowers the potential requirement. The copper vacancy and cation exchange with a hybrid CoS-CoS₂ structure are helpful in supplying more surface reactive species and faster ion transport for the HER and OER, respectively. The full-cell electrolyzer requires a very low potential of 1.58 V to attain a current density of 10 mA/cm², and it shows excellent stability for 50 h at 100 mA/cm² as confirmed by the chronopotentiometry test.

Boosting sluggish photocatalytic hydrogen evolution through piezo-stimulated polarization: a critical review

To address the growing energy demand, remarkable progress has been made in transferring the fossil fuel-based economy to hydrogen-based environmentally friendly photocatalytic technology. However, the sluggish production rate due to the quick charge recombination and slow diffusion process needs careful engineering to achieve the benchmark photocatalytic efficiency. Piezoelectric photocatalysis has emerged as a promising field in recent years due to its improved catalytic performance facilitated by a built-in electric field that promotes the effective separation of excitons when subjected to mechanical stimuli. This review discusses the recent progress in piezo-photocatalytic hydrogen evolution while elaborating on the mechanistic pathway, effect of piezo-polarization and various strategies adopted to improve piezo-photocatalytic activity. Moreover, our review systematically emphasizes the fundamentals of piezoelectricity and piezo-phototronics along with the operational mechanism for designing efficient piezoelectric photocatalysts. Finally, the summary and outlooks provide insight into the existing challenges and outline the future prospects and roadmap for the development of next-generation piezo-photocatalysts towards hydrogen evolution.

Recent Progress on Transition Metal Based Layered Double Hydroxides Tailored for Oxygen Electrode Reactions

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), namely, so-called oxygen electrode reactions, are two fundamental half-cell reactions in the energy storage and conversion devices, e.g., zinc–air batteries and fuel cells. However, the oxygen electrode reactions suffer from sluggish kinetics, large overpotential and complicated reaction paths, and thus require efficient and stable electrocatalysts. Transition-metal-based layered double hydroxides (LDHs) and their derivatives have displayed excellent catalytic performance, suggesting a major contribution to accelerate electrochemical reactions. The rational regulation of electronic structure, defects, and coordination environment of active sites via various functionalized strategies, including tuning the chemical composition, structural architecture, and topotactic transformation process of LDHs precursors, has a great influence on the resulting electrocatalytic behavior. In addition, an in-depth understanding of the structural performance and chemical-composition-performance relationships of LDHs-based electrocatalysts can promote further rational design and optimization of high-performance electrocatalysts. Finally, prospects for the design of efficient and stable LDHs-based materials, for mass-production and large-scale application in practice, are discussed.

ZIF-67-based catalysts for oxygen evolution reaction

As a new type of crystalline porous material, the imidazole zeolite framework (ZIF) has attracted widespread attention due to its ultra-high surface area, large pore volume, and unique advantage of easy functionalization. Developing different methods to control the shape and composition of ZIF is very important for its practical application as catalyst. In recent years, nano-ZIF has been considered an electrode material with excellent oxygen evolution reaction (OER) performance, which provides a new way to research electrolyzed water. This review focuses on the morphological engineering of the original ZIF-67 and its derivatives (core-shell, hollow, and array structures) through doping (cation doping, anion doping, and co-doping), derivative composition engineering (metal oxide, phosphide, sulfide, selenide, and telluride), and the corresponding single-atom catalysis. Besides, combined with DFT calculations, it emphasizes the in-depth understanding of actual active sites and provides insights into the internal mechanism of enhancing the OER and proposes the challenges and prospects of ZIF-67 based electrocatalysts. We summarize the application of ZIF-67 and its derivatives in the OER for the first time, which has significantly guided research in this field.

Strained Epitaxy of Monolayer Transition Metal Dichalcogenides for Wrinkle Arrays

Wrinkling two-dimensional (2D) transition metal dichalcogenides (TMDCs) provides a mechanism to adjust the physical and chemical properties as per need. Traditionally, TMDCs wrinkles achieved by transferring exfoliated materials on prestretched polymer suffer from poor control and limited sample area, which significantly hinders desirable applications. Herein, we fabricate large-area monolayer TMDCs wrinkle arrays directly on the m-quartz substrate using strained epitaxy. The uniaxial thermal expansion coefficient mismatch between the substrate and TMDCs materials enables the generation of large uniaxial thermal strain. By quenching the TMDCs after growth, this uniaxial thermal strain can be quickly released as a form of wrinkle arrays along the [0001]_quartz direction. Using WS₂ as a model system, the size of as-grown wrinkles can be finely modulated within sub-100 nm by changing the quenching temperature. These WS₂ wrinkles can be locally folded and form various multilayer structures with odd layer numbers during the transfer process. Besides, the corrugated structures in WS₂ wrinkles induce significant changes to optical properties including anisotropic Raman response, enhanced photoluminescence, and second harmonic generation emissions. Furthermore, these wrinkle arrays exhibit enhanced chemical reactivity that can be selectively engineered to ribbon arrays with improved electrocatalytic performance. The developed strategy of strained epitaxy here should enable flexibility in the design of more sophisticated 2D-based structures, offering a simple but effective way toward the modulation of properties with enhanced performances.

Atomic layer deposition of tungsten sulfide using a new metal-organic precursor and H2S: thin film catalyst for water splitting

Transition metal dichalcogenides (TMDs) are extensively researched in the past few years due to their two-dimensional layered structure similar to graphite. This group of materials offers tunable optoelectronic properties depending on the number of layers and therefore have a wide range of applications. Tungsten disulfide (WS₂) is one of such TMDs that has been studied relatively less compared to MoS₂. Herein, WS _x thin films are grown on several types of substrates by atomic layer deposition (ALD) using a new metal-organic precursor [tris(hexyne) tungsten monocarbonyl, W(CO)(CH₃CH₂C≡CCH₂CH₃)₃] and H₂S molecules at a relatively low temperature of 300 °C. The typical self-limiting film growth by varying both, precursor and reactant, is obtained with a relatively high growth per cycle value of ∼0.13 nm. Perfect growth linearity with negligible incubation period is also evident in this ALD process. While the as-grown films are amorphous with considerable S-deficiency, they can be crystallized as h-WS₂ film by post-annealing in the H₂S atmosphere above 700 °C as observed from x-ray diffractometry analysis. Several other analyses like Raman and x-ray photoelectron spectroscopy, transmission electron microscopy, UV-vis. spectroscopy are performed to find out the physical, optical, and microstructural properties of as-grown and annealed films. The post-annealing in H₂S helps to promote the S content in the film significantly as confirmed by the Rutherford backscattering spectrometry. Extremely thin (∼4.5 nm), as-grown WS _x films with excellent conformality (∼100% step coverage) are achieved on the dual trench substrate (minimum width: 15 nm, aspect ratio: 6.3). Finally, the thin films of WS _x (as-grown and 600/700 °C annealed) on W/Si and carbon cloth substrate are investigated for electrochemical hydrogen evolution reaction (HER). The as-grown WS _x shows poor performance towards HER and is attributed to the S-deficiency, amorphous character, and oxygen contamination of the WS _x film. Annealing the WS _x film at 700 °C results in the formation of a crystalline layered WS₂ phase, which significantly improves the HER performance of the electrode. The study reveals the importance of sulfur content and crystallinity on the HER performance of W-based sulfides.

Self-Assembled Two-Dimensional NiO/CeO2 Heterostructure Rich in Oxygen Vacancies as Efficient Bifunctional Electrocatalyst for Alkaline Hydrogen Evolution and Oxygen Evolution

The development of high-efficiency bifunctional electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline surroundings is essential and challenging for the large-scale generation of clean hydrogen. Herein, a novel self-assembled two-dimensional (2 D) NiO/CeO₂ heterostructure (HS) consisting of NiO and CeO₂ nanocrystals is prepared through a facile two-step approach, and utilized as an enhanced bifunctional electrocatalyst for the HER and OER under alkaline conditions. It is concluded that this 2 D NiO/CeO₂ HS, rich in oxygen vacancies, demonstrates attractive electrocatalytic properties for both the HER and OER in 1 m KOH, including low onset overpotential (η₁ ), η₁₀ and Tafel slope, excellent durability, as well as large active surface area. Therefore, the self-assembled 2 D NiO/CeO₂ HS is believed to be an efficient bifunctional electrocatalyst toward the HER and OER.

In situ grown CoS on nickel foam pre-deposited with sulphur as an efficient OER electrocatalyst

The NiCo-150 composite electrode on the NF was prepared via a simple two-step electrodeposition method with outstanding OER performance with an overpotential of 145 mV at 10 mA cm⁻² and 337 mV at 50 mA cm⁻².

The latest development of CoOOH two-dimensional materials used as OER catalysts

The influence of the structure–activity relationship of the two-dimensional CoOOH catalyst on the OER is analyzed from different angles.