A Carbazolyl Porphyrin‐Based Conjugated Microporous Polymer for Metal‐Free Photocatalytic Aerobic Oxidation Reactions

Red light photocatalysis of conjugated microporous polymers based on fused thiophenes for selective oxidation of amines

By virtue of tailorable building blocks, the band gaps and electronic structures of conjugated microporous polymers (CMPs) can be readily adjusted at the molecular level. Generally, the building blocks possessing extended π-conjugations result in exceptional photocatalytic performances. In this work, the direct CH arylation of fused thiophenes, thieno[3,2-b]thiophene (TT) and dithieno[3,2-b:2',3'-d]thiophene (DTT), with 1,3,6,8-tetrabromopyrene affords two CMPs, namely TT-Py-CMP and DTT-Py-CMP. The expansion of π-conjugations of the fused thiophenes from TT to DTT gives rise to a bathochromic shift about 30 nm from TT-Py-CMP to DTT-Py-CMP. Besides, systematic characterizations suggest the optoelectronic properties of DTT-Py-CMP are better than that of TT-Py-CMP. Furthermore, DTT-Py-CMP drives better red light photocatalysis than TT-Py-CMP for the selective oxidation of amines with molecular oxygen. The selective oxidation of benzyl amines by red light photocatalysis of DTT-Py-CMP progresses via an electron transfer pathway with high selectivities for imines. This work provides new insights that fused thiophenes could be the stepping stone in designing CMPs for expansive visible light photocatalysis.

Carbazole-Involved Conjugated Microporous Polymer Hollow Spheres for Selective Photocatalytic Oxidation of Benzyl Alcohol under Visible-Light Irradiation

Conjugated microporous polymers (CMPs) have been considered a type of promising visible-light-driven, organic photocatalysts. However, apart from designing high-performance CMPs from a molecular perspective, little attention is paid to improving the photocatalytic properties of these polymers through macrostructural regulation. Herein, we prepared a kind of hollow spherical CMPs involving carbazole monomers and studied their performance on the selective photocatalytic oxidation of benzyl alcohol under visible light irradiation. The results demonstrate that the introduction of a hollow spherical structure improves the physicochemical properties of the as-designed CMPs, including the specific surface areas, optoelectronic characteristics, as well as photocatalytic performance, etc. In particular, the hollow CMPs can more effectively oxidize benzyl alcohol compared to pristine ones under blue light illumination, and produce >1 mmol of benzaldehyde in 4.5 h with a yield of up to 9 mmol·g^-1·h^-1, which is almost 5 times higher than that of the pristine ones. Furthermore, such hollow architecture has a similar enhanced effect on the oxidation of some other aromatic alcohols. This work shows that the deliberate construction of specific macrostructures can better arouse the photocatalytic activity of the as-designed CMPs, which will contribute to the further use of these organic polymer semiconductors in photocatalysis areas.

Cobalt isatin-Schiff-base derivative of MOF as a heterogeneous multifunctional bio-photocatalyst for sunlight-induced tandem air oxidation condensation process

A sunlight-induced tandem air oxidation-condensation of alcohols with ortho-substituted anilines or malononitrile for the efficient synthesis of benz-imidazoles/-oxazoles/-thiazoles, or benzylidene malononitrile catalyzed by Co-isatin-Schiff-base-MIL-101(Fe) as a heterogeneous multifunctional bio-photocatalyst is reported. In these reactions, Co-isatin-Schiff-base-MIL-101(Fe) acts both as a photocatalyst, and a Lewis acid to catalyze the reaction of the in-situ formed aldehydes with o-substituted anilines or malononitrile. A significant decrease in the band gap energy and an increase in the characteristic emission of MIL-101(Fe) after functionalization with cobalt Schiff-base according to the DRS analysis and fluorescence spectrophotometry, respectively, indicate that the photocatalytic effectiveness of the catalyst is associated primarily to the synergetic influence of Fe-O cluster and Co-Schiff-base. EPR results obviously pointed out that Co-isatin-Schiff-base-MIL-101(Fe) is capable of creating ¹O₂ and O₂^⋅- as active oxygen species under visible light irradiation. Using an inexpensive catalyst, sunlight irradiation, air as a cost-effective and abundant oxidant, and a low amount of the catalyst with recoverability and durability in ethanol as a green solvent, make this methodology as an environmentally friendly process with energy-saving organic synthetic strategies. Furthermore, Co-isatin-Schiff-base-MIL-101(Fe) displays excellent photocatalytic antibacterial activity under sunlight irradiation against E. coli, S. aureus and S. pyogenes. Based on our knowledge, this is the first report of using a bio-photocatalyst for the synthesis of the target molecules.

A Porphyrin-Based Covalent Organic Framework as Metal-Free Visible-LED-Light Photocatalyst for One-Pot Tandem Benzyl Alcohol Oxidation/Knoevenagel Condensation

A porphyrin-based covalent organic framework (COF), namely Porph-UOZ-COF (UOZ stands for the University of Zabol), has been designed and prepared via the condensation reaction of 5,10,15,20-tetrakis-(3,4-dihydroxyphenyl)porphyrin (DHPP) with 1,4-benzenediboronic acid (DBBA), under the solvothermal condition. The solid was characterized by spectroscopic, microscopic, and powder X-ray diffraction techniques. The resultant multifunctional COF revealed an outstanding performance in catalyzing a one-pot tandem selective benzylic C-H photooxygenation/Knoevenagel condensation reaction in the absence of additives or metals under visible-LED-light irradiation. Notably, the catalytic activity of the COF was superior to individual organic counterparts and the COF was both stable and reusable for four consecutive runs. The present approach illustrates the potential of COFs as promising metal-free (photo) catalysts for the development of tandem reactions.

Selective photocatalytic oxidation of sulfides with dioxygen over carbazole-fluorene conjugated microporous polymers

One sustainable concept emerges to implement the selective oxidation of sulfides with dioxygen (O₂) at ambient conditions and has received increasing attention. As such, three donor-acceptor (D-A) type conjugated microporous polymers (CMPs) were connected via robust CC bonds prepared from FeCl₃-promoted polymerization of monomers of 3,6-di(9H-carbazol-9-yl)-9H-fluorene with the 9H position of the fluorene moiety occupied by 1,1'-biphenyl-, difluoro-, or keto- group, furnishing 9,9'-(9,9'-spirobi[fluorene]-2,7-diyl)-bis-9H-carbazole-CMP (SFC-CMP), 9,9'-(9,9-difluoro-9H-fluorene-2,7-diyl)bis(9H-carbazole)-CMP (FFC-CMP), and 2,7-di(carbazol-9-yl)-fluoren-9-one-CMP (OFC-CMP), respectively. These three carbazole-fluorene CMPs could implement blue light-driven highly selective oxidation of sulfides into sulfoxides with O₂ in methanol (CH₃OH). Intriguingly, the SFC-CMP imparted the best photocatalytic activity for selective oxidation of sulfides in a broad scope. Besides, the SFC-CMP photocatalyst could be fully recovered even outperforming the fresh one. This work highlights that the properties of CMPs could be regulated by the D-A units like carbazole-fluorene to execute selective chemical transformations ambiently.

Aerobic Photocatalysis: Oxidation of Sulfides to Sulfoxides

Sulfoxides constitute one of the most important functional groups in organic chemistry found in numerous pharmaceuticals and natural products. Sulfoxides are usually obtained from the oxidation of the corresponding sulfides. Among various oxidants, oxygen or air are considered the greenest and most sustainable reagent. Photochemistry and photocatalysis is increasingly applied in new, as well as traditional, yet demanding, reaction, like the aerobic oxidation of sulfides to sulfoxides, since photocatalysis has provided the means to access them in mild and effective ways. In this review, we will summarize the photochemical protocols that have been developed for the oxidation of sulfides to sulfoxides, employing air or oxygen as the oxidant. The aim of this review is to present: i) a historical overview, ii) the key mechanistic studies and proposed mechanisms and iii) categorize the different catalytic systems in literature.

Visible Light-Induced Aerobic Oxidative Dehydrogenation of C-N/C-O to C=N/C=O Bonds Using Metal-Free Photocatalysts: Recent Developments

Performing synthetic transformation using visible light as energy source, in the presence of a photocatalyst as a promoter, is currently of high interest, and oxidation reactions carried out under these conditions using oxygen as the final oxidant are particularly convenient from an environmental point of view. This review summarizes the recent developments achieved in the oxidative dehydrogenation of C-N and C-O bonds, leading to C=N and C=O bonds, respectively, using air or pure oxygen as oxidant and metal-free homogeneous or recyclable heterogeneous photocatalysts under visible light irradiation.

Modulating the optical properties and functions of organic molecules through polymerization

Organic functional materials with advanced optical properties have attracted much attention due to their broad applications, such as in light-emitting diodes, solar cells, anti-counterfeiting, photocatalysis, and even disease diagnosis and treatment. Recent research has revealed that many optical properties of organic molecules can be improved through simple polymerization. In this review, we discuss the phenomenon, mechanism, and impact of polymerization on the properties of materials, including the polymerization-induced spectral shift, polymerization-enhanced photosensitization, polymerization-enhanced two-photon absorption, polymerization-enhanced photocatalytic efficiency, polymerization-induced room temperature phosphorescence, polymerization-induced thermally activated delayed fluorescence, and polymerization-induced emission using specific examples with different applications. The new opportunities arising from polymerization in designing high performance optical materials are summarized in the future perspective.

A Porphyrin-Based Covalent Organic Framework for Metal-Free Photocatalytic Aerobic Oxidative Coupling of Amines

Imine is an important intermediate in drug synthesis. Photocatalytic aerobic oxidative coupling of amines has been considered as a clean and promising way to produce imine and attracted great attentions. Herein, we designed and synthesized a novel two-dimensional porphyrin-based COF (Por-BC-COF) which adopts an AA stacking mode with excellent crystallinity, high Brunauer-Emmett-Teller surface areas (1200 m 2 g -1 ), wide light absorption range (200-1300 nm) and good stability in a variety of organic solvents. Por-BC-COF can be used as a metal-free heterogeneous photocatalyst for the photocatalytic oxidation of amines to imines under visible light and red light with a high yield (97%). This work presents a novel and efficient COF photocatalyst in the application of light-driven organic synthesis.

Pyrrole-Based Conjugated Microporous Polymers as Efficient Heterogeneous Catalysts for Knoevenagel Condensation

Conjugated microporous polymers (CMPs) with robust architectures, facilely tunable pore sizes and large specific surface areas have emerged as an important class of porous materials due to their demonstrated prospects in various fields, e.g. gas storage/separation and heterogeneous catalysis. Herein, two new pyrrole-based CMPs with large specific surface areas and good stabilities were successfully prepared by one-step oxidative self-polycondensation of 1,2,4,5-tetra (pyrrol-2-ly)benzene or 1,3,5-tri (pyrrol-2-ly)benzene, respectively. Interestingly, both CMPs showed very high catalytic activity toward Knoevenagel condensation reaction, which was attributed to the inherent pore channels, high specific surface areas and abundant nitrogen sites within CMPs. Additionally, both CMPs displayed excellent recyclability with negligible degradation after 10 cycles. This work provides new possibilities into designing novel nitrogen-rich high-performance heterogeneous catalysts.