Cooperative amplification of Prussian blue as a signal indicator and functionalized metal-organic framework-based electrochemical biosensor for an ultrasensitive HE4 assay

Human epididymis protein 4 (HE4), a diagnostic biomarker of ovarian cancer, is crucial for monitoring the early stage of the disease. Hence, it is highly important to develop simple, inexpensive, and user-friendly biosensors for sensitive and quantitative HE4 assays. Herein, a new sandwich-type electrochemical immunosensor based on Prussian blue (PB) as a signal indicator and functionalized metal-organic framework nanocompositesas efficient signal amplifiers was fabricated for quantitative analysis of HE4. In principle, ketjen black (KB) and AuNPs modified on TiMOF (TiMOF-KB@AuNPs) could accelerate electron transfer on the electrode surface and act as a matrix for the immobilization of antibodies via cross-linking to improve the determination sensitivity. The PB that covalently binds to labeled antibodies endows the biosensors with intense electrochemical signals. Furthermore, the concentration of HE4 could be indirectly detected by monitoring the electroactivity of PB. Benefiting from the high signal amplification ability of the PB and MOF nanocomposites, this strategy displayed a wide linear range (0.1-80 ng mL-1) and a lower detection limit (0.02 ng mL-1). Hence, this study demonstrated great promise for application in clinical ovarian cancer diagnosis and treatment, and provided a new platform for detecting other cancer biomarkers.

A green approach to encapsulate proteins and enzymes within crystalline lanthanide-based Tb and Gd MOFs

In this work, bovine serum albumin (BSA) and Aspergillus sp. laccase (LC) were encapsulated in situ within two lanthanide-based MOFs (TbBTC and GdBTC) through a green one-pot synthesis (almost neutral aqueous solution, T = 25 °C, and atmospheric pressure) in about 1 h. Pristine MOFs and protein-encapsulated MOFs were characterized through wide angle X-ray scattering, scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared and Raman spectroscopies. The location of immobilized BSA molecules, used as a model protein, was investigated through small angle X-ray scattering. BSA occurs both on the inner and on the outer surface of the MOFs. LC@TbBTC, and LC@GdBTC samples were also characterized in terms of specific activity, kinetic parameters, and storage stability both in water and acetate buffer. The specific activity of LC@TbBTC was almost twice that of LC@GdBTC (10.8 μmol min-1 mg-1vs. 6.6 μmol min-1 mg-1). Both biocatalysts showed similar storage stabilities retaining ∼60% of their initial activity after 7 days and ∼20% after 21 days. LC@TbBTC dispersed in acetate buffer exhibited a higher storage stability than LC@GdBTC. Additionally, terbium-based MOFs showed interesting luminescent properties. Together, these findings suggest that TbBTC and GdBTC are promising supports for the in situ immobilization of proteins and enzymes.

Modulating confinement space in metal-organic frameworks enables highly selective indole C3-formylation

Here, Selective C3-formylation of indole was achieved under mild conditions using a metal-organic framework (MOF) catalyst. The confined reaction space within the MOF pores effectively suppressed undesired side reactions and promoted the formation of the targeted product by controlling the reaction pathway. Density functional theory (DFT) calculations corroborated the experimental observations.

Substrate Selectivity Imparted by Self-Assembled Molecular Containers and Catalysts

Recent trends in catalysis are devoted to mimicking some peculiar features of enzymes like site selectivity, through functional group recognition, and substrate selectivity, through recognition of the entire surface of the substrate. The latter is a specific feature of enzymes that is seldomly present in homogeneous catalysis. Supramolecular catalysis, thanks to the self-assembly of simple subunits, enables the creation of cavities and surfaces whose confinement effects drive the preferential binding of a substrate among others with consequent substrate selectivity. The topic is an emerging field that exploits recognition phenomena to discriminate the reagents based on their size and shape. This review deals this cutting-edge field of research covering examples of supramolecular self-assembled molecular containers and catalysts operating in organic as well as aqueous media, with special emphasis for catalytic systems dealing with direct competitive experiments involving two or more substrates.

Understanding and Controlling Molecular Compositions and Properties in Mixed-Linker Porphyrin Metal-Organic Frameworks

Porphyrin-based metal-organic frameworks (MOFs) are attractive materials for photo- and thermally activated catalysis due to their unique structural features related to the porphyrin moiety, guest-accessible porosity, and high chemical tunability. In this study, we report the synthetic incorporation of nonplanar β-ethyl-functionalized porphyrin linkers into the framework structure of PCN-222, obtaining a solid-solution series of materials with different modified linker contents. Comprehensive analysis by a combination of characterization techniques, such as NMR, UV-vis and IR spectroscopy, powder X-ray diffraction, and N2 sorption analysis, allows for the confirmation of linker incorporation. A detailed structural analysis of intrinsic material properties, such as the thermal response of the different materials, underlines the complexity of synthesizing and understanding such materials. This study presents a blueprint for synthesizing and analyzing porphyrin-based mixed-linker MOF systems and highlights the hurdles of characterizing such materials.

Enhancing CO2 Hydrogenation Using a Heterogeneous Bimetal NiAl-Deposited Metal-Organic Framework NU-1000: Insights from First-Principles Calculations

The hydrogenation of CO2 to high-value-added liquid fuels is crucial for greenhouse gas emission reduction and optimal utilization of carbon resources. Developing supported heterogeneous catalysts is a key strategy in this context, as they offer well-defined active sites for in-depth mechanistic studies and improved catalyst design. Here, we conducted extensive first-principles calculations to systematically explore the reaction mechanisms for CO2 hydrogenation on a heterogeneous bimetal NiAl-deposited metal-organic framework (MOF) NU-1000 and its catalytic performance as atomically dispersed catalysts for CO2 hydrogenation to formic acid (HCOOH), formaldehyde (H2CO), and methanol (CH3OH). The present results reveal that the presence of the NiAl-oxo cluster deposited on NU-1000 efficiently activates H2, and the facile heterolysis of H2 on Ni and adjacent O sites serves as a precursor to the hydrogenation of CO2 into various C1 products HCOOH, H2CO, and CH3OH. Generally, H2 activation is the rate-determining step in the entire CO2 hydrogenation process, the corresponding relatively low free energy barriers range from 14.5 to 15.9 kcal/mol, and the desorption of products on NiAl-deposited NU-1000 is relatively facile. Although the Al atom does not directly participate in the reaction, its presence provides exposed oxygen sites that facilitate the heterolytic cleavage of H2 and the hydrogenation of C1 intermediates, which plays an important role in enhancing the catalytic activity of the Ni site. The present study demonstrates that the catalytic performance of NU-1000 can be finely tuned by depositing heterometal-oxo clusters, and the porous MOF should be an attractive platform for the construction of atomically dispersed catalysts.

Directing the Selectivity of Oxygen Reduction to Water by Confining a Cu Catalyst in a Metal Organic Framework

Electrocatalysis is to play a key role in the transition towards a sustainable chemical and energy industry and active, stable and selective redox catalysts are much needed. Porous structures such as metal organic frameworks (MOFs) are interesting materials as these may influence selectivity of chemical reactions through confinement effects. In this work, the oxygen reduction catalyst Cu-tmpa was incorporated into the NU1000 MOF. Confinement of the catalyst within NU1000 steers the selectivity of the oxygen reduction reaction (ORR) towards water rather than peroxide. This is attributed to retention of the obligatory H2 O2 intermediate in close proximity to the catalytic center. Moreover, the resulting NU1000|Cu-tmpa MOF shows an excellent activity and stability in prolonged electrochemical studies, illustrating the potential of this approach.

In Situ Neutron Diffraction of Zn-MOF-74 Reveals Nanoconfinement-Induced Effects on Adsorbed Propene

Even though confinement was identified as a common element of selective catalysis and simulations predicted enhanced properties of adsorbates within microporous materials, experimental results on the characterization of the adsorbed phase are still rare. In this study, we provide experimental evidence of the increase of propene density in the channels of Zn-MOF-74 by 16(2)% compared to the liquid phase. The ordered propene molecules adsorbed within the pores of the MOF have been localized by in situ neutron powder diffraction, and the results are supported by adsorption studies. The formation of a second adsorbate layer, paired with nanoconfinement-induced short intermolecular distances, causes the efficient packing of the propene molecules and results in an increase of olefin density.

Road Map for In Situ Grown Binder-Free MOFs and Their Derivatives as Freestanding Electrodes for Supercapacitors

Among several electrocatalysts for energy storage purposes including supercapacitors, metal-organic frameworks (MOFs), and their derivatives have spurred wide spread interest owing to their structural merits, multifariousness with tailor-made functionalities and tunable pore sizes. The electrochemical performance of supercapacitors can be further enhanced using in situ grown MOFs and their derivatives, eliminating the role of insulating binders whose "dead mass" contribution hampers the device capability otherwise. The expulsion of binders not only ensures better adhesion of catalyst material with the current collector but also facilitates the transport of electron and electrolyte ions and remedy cycle performance deterioration with better chemical stability. This review systematically summarizes different kinds of metal-ligand combinations for in situ grown MOFs and derivatives, preparation techniques, modification strategies, properties, and charge transport mechanisms as freestanding electrode materials in determining the performance of supercapacitors. In the end, the review also highlights potential promises, challenges, and state-of-the-art advancement in the rational design of electrodes to overcome the bottlenecks and to improve the capability of MOFs in energy storage applications.

Conformational changes and location of BSA upon immobilization on zeolitic imidazolate frameworks

The location and the conformational changes of proteins/enzymes immobilized within Metal Organic Frameworks (MOFs) are still poorly investigated and understood. Bovine serum albumin (BSA), used as a model protein, was immobilized within two different zeolitic imidazolate frameworks (ZIF-zni and ZIF-8). Pristine ZIFs and BSA@ZIFs were characterized by X-ray diffraction, small-angle X-ray scattering, scanning electron microscopy, confocal laser scanning microscopy, thermogravimetric analysis, micro-FTIR and confocal Raman spectroscopy to characterize MOFs structure and the protein location in the materials. Moreover, the secondary structure and conformation changes of BSA after immobilization on both ZIFs were studied with FTIR. BSA is located both in the inner and on the outer surface of MOFs, forming domains that span from the micro- to the nanoscale. BSA crystallinity (β-sheets + α-helices) increases up to 25 % and 40 % due to immobilization within ZIF-zni and ZIF-8, respectively, with a consequent reduction of β-turns.

Investigation of the Influence of Functionalization Strategy on Urea 2D MOF Catalytic Performance

Urea-functionalized MOFs with unique properties have recently been used as efficient platforms to conduct organocatalytic reactions. To gain more insight into the key factors which govern an efficient organocatalytic reaction in urea-MOFs, two different urea-containing 2D MOFs TMU-58 ([Zn(L1)(oba)].CH₃CN) and TMU-83 ([Zn(L2)(oba)].DMF), where L1 = (1E,5E)-1,5-bis(1-(pyridine-4-ylethylidene)carbonohydrazide, L2 = (1E,5E)-1,5-bis(1-(pyridine-4-ylmethylene)carbonohydrazide, and oba = 4,4'-oxybisbenzoic acid, with abundant accessible active sites, were selected and examined in the methanolysis of styrene oxide. TMU-58 with the ability to form a two-point H-bond with different substrates revealed a high organocatalytic efficiency in the regioselective ring opening of styrene oxide. The catalytic activation of epoxide oxygen by the urea N-H functional sites, followed by the nucleophilic attack of methanol at the benzylic carbon led to the formation of 2-methoxy-2-phenylethanol as the major product. DFT calculations were also performed to investigate the acidic strength of the urea hydrogens in both TMU-58 and TMU-83 structures as a major factor to conduct an efficient catalytic reaction. The results indicated the more acidic nature of the urea hydrogens in TMU-83; however, its catalytic efficiency was remarkably reduced due to the inappropriate orientation of the active interaction sites within the framework revealing the importance of proper orientation of the urea hydrogens in conducting an efficient organocatalytic reaction. The current study provides a comparative study on the function-property relationship in 2D MOF assemblies which has not been explored so far.

Highly-fluorescent BODIPY-functionalised metallacages as drug delivery systems: synthesis, characterisation and cellular accumulation studies

With the aim of designing new metallosupramolecular architectures for drug delivery, research has focused on porous 3-dimensional (3D)-metallacages able to encapsulate cytotoxic agents protecting them from metabolism while targeting them to cancer sites. Here, two self-assembled [Pd₂L₄]⁴⁺ cages (CG1 and CG2) featuring 3,5-bis(3-ethynylpyridine)phenyl ligands (L) exo-functionalised with dipyrromethene (BODIPY) groups have been synthesised and characterised by different methods, including NMR spectroscopy and mass spectrometry. ¹H NMR spectroscopy studies shows that the cages are able to encapsulate the anticancer drug cisplatin in their hydrophobic cavity, as evidenced by electrostatic potential (ESP) analysis based on XRD studies. The stability of the cages in an aqueous environment, and in the presence of the intracellular reducing agent glutathione, has been confirmed by UV-visible absorption spectroscopy. The luminescence properties of the cages enabled the investigation of their cellular uptake and intracellular localisation in human cancer cells by confocal laser scanning microscopy. In melanoma A375 cells, cage CG1 is taken up via active transport and endocytic trafficking studies show little evidence of transport through the early endosome while the cages accumulated in melanosomes rather than lysosomes. The antiproliferative activity of the lead cage was investigated in A375 together with two breast cancer cell lines, SK-BR-3 and MCF7. While the cage per se is non-cytotoxic, very different antiproliferative effects with respect to free cisplatin were evidenced for the [(cisplatin)₂⊂CG1·BF4] complex in the various cell lines, which correlate with its different intracellular localisation profiles. The obtained preliminary results provide a new hypothesis on how the subcellular localisation of the cage affects the cisplatin intracellular release.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Threefold reactivity of a COF-embedded rhenium catalyst: reductive etherification, oxidative esterification or transfer hydrogenation

The reactivity of the novel Re(i) catalyst [Re(C12Anth-py2)(CO)3Br] is modulated by its interactions with the covalent organic framework (COF) TFB-BD.

Three-fold interpenetrated metal–organic framework as a multifunctional fluorescent probe for detecting 2,4,6-trinitrophenol, levofloxacin, and l-cystine

A robust Zn(ii) MOF with good chemical and thermal stability, was prepared as an effective fluorescent probe for 2,4,6-trinitrophenol (TNP), levofloxacin (LVX) and l-cystine (l-Cys) with recyclability.

Topology- and wavelength-governed CO2 reduction photocatalysis in molecular catalyst-metal–organic framework assemblies

Optimising catalyst materials for visible light-driven fuel production requires understanding complex and intertwined processes including light absorption and catalyst stability, as well as mass, charge, and energy transport. These phenomena can be uniquely combined (and ideally controlled) in porous host–guest systems. Towards this goal we designed model systems consisting of molecular complexes as catalysts and porphyrin metal–organic frameworks (MOFs) as light-harvesting and hosting porous matrices. Two MOF-rhenium molecule hybrids with identical building units but differing topologies (PCN-222 and PCN-224) were prepared including photosensitiser-catalyst dyad-like systems integrated via self-assembled molecular recognition. This allowed us to investigate the impact of MOF topology on solar fuel production, with PCN-222 assemblies yielding a 9-fold turnover number enhancement for solar CO₂-to-CO reduction over PCN-224 hybrids as well as a 10-fold increase compared to the homogeneous catalyst-porphyrin dyad. Catalytic, spectroscopic and computational investigations identified larger pores and efficient exciton hopping as performance boosters, and further unveiled a MOF-specific, wavelength-dependent catalytic behaviour. Accordingly, CO₂ reduction product selectivity is governed by selective activation of two independent, circumscribed or delocalised, energy/electron transfer channels from the porphyrin excited state to either formate-producing MOF nodes or the CO-producing molecular catalysts.

Two MOF molecular catalyst hybrids with differing topologies show mass and light transport governed photocatalysis. MOF-specific, irradiation wavelength-dependent product control is unlocked by switching between two energy/electron transfer channels.

Vectorial Catalysis in Surface-Anchored Nanometer-Sized Metal-Organic Frameworks-Based Microfluidic Devices

Vectorial catalysis—controlling multi‐step reactions in a programmed sequence and by defined spatial localization in a microscale device—is an enticing goal in bio‐inspired catalysis research. However, translating concepts from natural cascade biocatalysis into artificial hierarchical chemical systems remains a challenge. Herein, we demonstrate integration of two different surface‐anchored nanometer‐sized metal–organic frameworks (MOFs) in a microfluidic device for modelling vectorial catalysis. Catalyst immobilization at defined sections along the microchannel and a two‐step cascade reaction was conducted with full conversion after 30 seconds and high turnover frequencies (TOF≈10⁵ h⁻¹).

Tailoring Heterogeneous Catalysts at the Atomic Level: In Memoriam, Prof. Chia-Kuang (Frank) Tsung

Professor Chia-Kuang (Frank) Tsung made his scientific impact primarily through the atomic-level design of nanoscale materials for application in heterogeneous catalysis. He approached this challenge from two directions: above and below the material surface. Below the surface, Prof. Tsung synthesized finely controlled nanoparticles, primarily of noble metals and metal oxides, tailoring their composition and surface structure for efficient catalysis. Above the surface, he was among the first to leverage the tunability and stability of metal-organic frameworks (MOFs) to improve heterogeneous, molecular, and biocatalysts. This article, written by his former students, seeks first to commemorate Prof. Tsung's scientific accomplishments in three parts: (1) rationally designing nanocrystal surfaces to promote catalytic activity; (2) encapsulating nanocrystals in MOFs to improve catalyst selectivity; and (3) tuning the host-guest interaction between MOFs and guest molecules to inhibit catalyst degradation. The subsequent discussion focuses on building on the foundation laid by Prof. Tsung and on his considerable influence on his former group members and collaborators, both inside and outside of the lab.

Understanding entrapped molecular photosystem and metal-organic framework synergy for improved solar fuel production

Artificial photosystems assembled from molecular complexes, such as the photocatalyst fac-ReBr(CO)3(4,4'-dcbpy) (dcbpy = dicarboxy-2,2'-bipyridine) and the photosensitiser Ru(bpy)2(5,5'-dcbpy)Cl2 (bpy = 2,2'-bipyridine), are a wide-spread approach for solar fuel production. Recently metal-organic framework (MOF) entrapping of such complexes was demonstrated as a promising concept for catalyst stabilisation and reaction environment optimisation in colloidal-based CO2 reduction. Building on this strategy, here we examined the influence of MIL-101-NH2(Al) MOF particle size, the electron donor source, and the presence of an organic base on the photocatalytic CO2-to-CO reduction performance, and the differences to homogeneous systems. A linear relation between smaller scaffold particle size and higher photocatalytic activity, longer system lifetimes for benign electron donors, and increased turnover numbers (TONs) with certain additive organic bases, were determined. This enabled understanding of key molecular catalysis phenomena and synergies in the nanoreactor-like host-guest assembly, and yielded TONs of ∼4300 over 96 h of photocatalysis under optimised conditions, surpassing homogeneous TON values and lifetimes.

Structural flexibility in crystalline coordination polymers: a journey along the underlying free energy landscape

In this perspective, we discuss structural flexibility in crystalline coordination polymers. We identify that the underlying free energy landscape unites scientific disciplines, and discuss key areas to advanced the field.