Engineering Strategies for Successful Development of Functional Polymers Using Oxidative Enzymes

Improving Properties of Starch-Based Adhesives with Carboxylic Acids and Enzymatically Polymerized Lignosulfonates

A novel strategy for improving wet resistance and bonding properties of starch-based adhesives using enzymatically polymerized lignosulfonates and carboxylic acids as additives was developed. Therefore, lignosulfonates were polymerized by laccase to a molecular weight of 750 kDa. Incorporation of low concentrations (up to 1% of the starch weight) of 1,2,3,4-butanetetracarboxylic acid (BTCA) led to further improvement on the properties of the adhesives, while addition of greater amounts of BTCA led to a decrease in the properties measured due to large viscosity increases. Great improvements in wet-resistance from 22 to 60 min and bonding times (from 30 to 20 s) were observed for an adhesive containing 8% enzymatically polymerized lignin and 1% BTCA. On the other hand, the addition of citric acid (CA) deteriorated the properties of the adhesives, especially when lignosulfonate was present. In conclusion, this study shows that the addition of the appropriate amount of enzymatically polymerized lignosulfonates together with carboxylic acids (namely BTCA) to starch-based adhesives is a robust strategy for improving their wet resistance and bonding times.

Experimental and modeling of tetracycline degradation in water in a flow-through enzymatic monolithic reactor

In this work, the laccase from Trametes versicolor was immobilized in highly porous silica monoliths (0.6-cm diameter, 0.5-cm length). These monoliths feature a unique homogeneous network of interconnected macropores (20 μm) with mesopores (20 nm) in the skeleton and a high specific surface area (330 m²/g). The enzymatic monoliths were applied to degrade tetracycline (TC) in model aqueous solutions (20 ppm). For this purpose, a tubular flow-through reactor (FTR) configuration with recycling was built. The TC degradation was improved with oxygen saturation, presence of degradation products, and recirculation rate. The TC depletion reaches 50% in the FTR and 90% in a stirred tank reactor (CSTR) using crushed monoliths. These results indicate the importance of maintaining a high co-substrate concentration near active sites. A model coupling mass transfers with a Michaelis-Menten kinetics was applied to simulate the TC degradation in real wastewaters at actual TC concentration (2.8 10^-4 ppm). Simulation results show that industrial scale FTR reactor should be suitable to degrade 90% of TC in 5 h at a flow rate of 1 mL/min in a single passage flow configuration. Nevertheless, the process could certainly be further optimized in terms of laccase activity, oxygen supply near active sites, and contact time.

Enzymatic Conversion of Lignosulfonate into Wood Adhesives: A Next Step towards Fully Biobased Composite Materials

This study investigates the effect of the enzymatic polymerization of lignosulfonate for the formulation of a lignosulfonate-based adhesive. For this, beech lamellas were glued together and tested according to the EN 302-1 standard. The results showed that the laccase-polymerized lignosulfonate-based wood adhesives (LS-p) had similar mechanical properties as a standard carpenter’s glue (PVAc-based D3 class white glue), as no significant difference in tensile shear strength between these two adhesive types was found. However, carpenter’s glue showed almost 100% wood failure, while with the lignosulfonate-based wood glue, the samples failed, mainly in the glueline. Pre-polymerization of LS-p is the most critical factor to achieve the required viscosity, which is also connected to the wetting properties and the resulting tensile shear strength. The longer the pre-polymerization, the higher the viscosity of the LS-p adhesive, with the tensile shear strength reaching a plateau. The presented data show the potential of using enzymatically pre-polymerized lignosulfonate as a well-performing wood adhesive. Further development and optimization of the pre-polymerization process is required, which is also important to push towards upscaling and practical applications.

Anti-Cancerous Potential of Polyphenol-Loaded Polymeric Nanotherapeutics

Recent evidence has extensively demonstrated the anticancer potential of nutraceuticals, including plant polyphenols. Polymeric nanocarrier systems have played an important role in improving the physicochemical and pharmacological properties of polyphenols, thus ameliorating their therapeutic effectiveness. This article summarizes the benefits and shortcomings of various polymeric systems developed for the delivery of polyphenols in cancer therapy and reveals some ideas for future work.

Biofabricating Functional Soft Matter Using Protein Engineering to Enable Enzymatic Assembly

Biology often provides the inspiration for functional soft matter, but biology can do more: it can provide the raw materials and mechanisms for hierarchical assembly. Biology uses polymers to perform various functions, and biologically derived polymers can serve as sustainable, self-assembling, and high-performance materials platforms for life-science applications. Biology employs enzymes for site-specific reactions that are used to both disassemble and assemble biopolymers both to and from component parts. By exploiting protein engineering methodologies, proteins can be modified to make them more susceptible to biology's native enzymatic activities. They can be engineered with fusion tags that provide (short sequences of amino acids at the C- and/or N- termini) that provide the accessible residues for the assembling enzymes to recognize and react with. This "biobased" fabrication not only allows biology's nanoscale components (i.e., proteins) to be engineered, but also provides the means to organize these components into the hierarchical structures that are prevalent in life.

Polyphenols delivery by polymeric materials: challenges in cancer treatment

Nanotechnology can offer different solutions for enhancing the therapeutic efficiency of polyphenols, a class of natural products widely explored for a potential applicability for the treatment of different diseases including cancer. While possessing interesting anticancer properties, polyphenols suffer from low stability and unfavorable pharmacokinetics, and thus suitable carriers are required when planning a therapeutic protocol. In the present review, an overview of the different strategies based on polymeric materials is presented, with the aim to highlight the strengths and the weaknesses of each approach and offer a platform of ideas for researchers working in the field.

Horseradish peroxidase (HRP) as a tool in green chemistry

The horseradish peroxidase (HRP) potential in organic synthesis.