CO2Capture from Air Using Amine-Functionalized Kaolin-Based Zeolites

Facile Synthesis of Self-Supported Solid Amine Sorbents for Direct Air Capture

Conventional usage of tetraethylenepentamine (TEPA) via being supported on porous solid materials for carbon capture is susceptible to oxidative degradation during regeneration cycles. This study reports a novel method to synthesize a TEPA based solid polymer for efficient CO2 removal via direct air capture (DAC). The polymer was obtained through epoxy-amine crosslinking reaction, leading to the transformation of liquid TEPA to a self-supported solid polymer. The synthesis was conducted under ambient conditions via a one-pot process with no waste products, which is aligned with green synthesis. The performance of the solid amine was evaluated in DAC under realistic conditions and compared with TEPA supported on SiO2 and zeolite 13X prepared through the conventional method. The solid TEPA amine exhibited a high CO2 uptake of 6.2 wt.% comparable to the conventional counterparts. More importantly, the solid TEPA amine demonstrated high resistance to oxidation during the accelerated ageing process at 80 °C in air for 24 h, whereas the two supported TEPA samples experienced severe degradation, with zeolite 13X supported TEPA incurring a reduction of 86.5 % in CO2 capturing capacity after the ageing. This work sheds light on the novel usage of TEPA as an efficient solid amine for practical DAC operation.

Effect of Temperature on CO2 Adsorption onto Amine-Functionalized KIT-6 Adsorbents

The mesoporous silica KIT-6 was synthesized and functionalized with 3-aminopropyltriethoxysilane (APTES) by grafting at 110 °C. The composites were prepared with three different concentrations of APTES: 20, 30 and 40 wt.%. The as-prepared samples were characterized by thermal gravimetric analysis in air and nitrogen atmosphere (TG/DTA), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction and nitrogen adsorption-desorption. In this study, CO2 adsorption-desorption was investigated using temperature programmed desorption mass spectrometry (TPD-MS) at different temperatures. The adsorption capacity of the prepared composites is 2.23 mmol CO2/g at 40 °C and decreases to 0.95 mmol/g at 70 °C. Regarding the efficiency of the amino groups, the best result was obtained for APTES-grafted KIT-6 at 40 °C, with 0.512 mmol CO2/mmol NH2. The results showed good cyclical stability in adsorption capacities even after nine adsorption-desorption cycles.

Evaluating the efficacy of zeolites synthesized from natural clay for the methanol-to-hydrocarbon process

Introducing sustainability into advanced catalytic material design is essential to address growing environmental concerns. Among them, synthesizing inorganic zeolite materials from non-traditional sources (like natural clay) offers several advantages, contributing to sustainability and environmental stewardship. With this objective, we used kaolin to synthesize zeolites with different topologies: SSZ-13 (8-MR with CHA topology), ZSM-5 (10-MR with MFI topology), and Beta (12-MR with BEA topology) (MR: member ring), where a simple and flexible synthetic protocol was adopted without any significant changes. All these zeolites were subjected to catalytic performance evaluation concerning the industrially relevant methanol-to-hydrocarbon (MTH) process. Herein, the kaolin-derived zeolites, especially ZSM-5, led to superior performance and demonstrated enhanced catalyst deactivation-resistant behavior compared to their zeolite counterparts prepared from traditional synthetic routes. Various characterization tools (including under operando conditions) were employed to understand their reactions and deactivation mechanisms. Overall, making zeolites from non-traditional sources presents a pathway for sustainable and environmentally friendly material production, offering benefits such as reduced resource dependence, lower energy consumption, and tailored physicochemical properties beneficial to catalysis. In a broader context, such a research approach contributes to the transition toward a more sustainable and circular economy.

Improving the efficiency of 4A-zeolite synthesized from kaolin by amine functionalization for CO2 capture

This study focuses on optimizing the CO2 adsorption capacity of 4A-zeolite synthesized from kaolin by employing structural modifications through impregnation with tetraethylenepentamine (TEPA) and diethanolamine (DEA). Various analytical techniques were utilized to evaluate the effectiveness of these modifications. Design expert software and response surface methodology (RSM) was employed for data analysis and operational variable optimization, leading to improved CO2 adsorption performance of the modified zeolites. The adsorption capacity of the modified zeolites was assessed under different temperatures, pressures, and amine concentrations using a test device. The optimal adsorption capacity of 4A-DEA adsorbent is found to be 579.468 mg/g, with the optimal operational variables including a temperature of 25.270 °C, pressure of 8.870 bar, and amine concentration of 11.112 wt%. The analysis shows that the adsorption process involves both physisorption and chemisorption, and the best kinetic model is the fractional-factor model.

Efficient Synthesis of 2D Mica Nanosheets by Solvothermal and Microwave-Assisted Techniques for CO2 Capture Applications

Mica, a commonly occurring mineral, has significant potential for various applications due to its unique structure and properties. However, due to its non-Van Der Waals bonded structure, it is difficult to exfoliate mica into ultrathin nanosheets. In this work, we report a rapid solvothermal microwave synthesis of 2D mica with short reaction time and energy conservation. The resulting exfoliated 2D mica nanosheets (eMica nanosheets) were characterized by various techniques, and their ability to capture CO₂ was tested by thermogravimetric analysis (TGA). Our results showed an 87% increase in CO₂ adsorption capacity with eMica nanosheets compared to conventional mica. Further characterization by Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS), as well as first-principles calculations, showed that the high specific surface area and deposited K₂CO₃ layer contribute to the increased CO₂ adsorption on the mica nanosheets. These results speak to the potential of high-quality eMica nanosheets and efficient synthesis processes to open new avenues for new physical properties of 2D materials and the development of CO₂ capture technologies.

Recent advances in direct air capture by adsorption

Significant progress has been made in direct air capture (DAC) in recent years. Evidence suggests that the large-scale deployment of DAC by adsorption would be technically feasible for gigatons of CO₂ capture annually. However, great efforts in adsorption-based DAC technologies are still required. This review provides an exhaustive description of materials development, adsorbent shaping, in situ characterization, adsorption mechanism simulation, process design, system integration, and techno-economic analysis of adsorption-based DAC over the past five years; and in terms of adsorbent development, affordable DAC adsorbents such as amine-containing porous materials with large CO₂ adsorption capacities, fast kinetics, high selectivity, and long-term stability under ultra-low CO₂ concentration and humid conditions. It is also critically important to develop efficient DAC adsorptive processes. Research and development in structured adsorbents that operate at low-temperature with excellent CO₂ adsorption capacities and kinetics, novel gas-solid contactors with low heat and mass transfer resistances, and energy-efficient regeneration methods using heat, vacuum, and steam purge is needed to commercialize adsorption-based DAC. The synergy between DAC and carbon capture technologies for point sources can help in mitigating climate change effects in the long-term. Further investigations into DAC applications in the aviation, agriculture, energy, and chemical industries are required as well. This work benefits researchers concerned about global energy and environmental issues, and delivers perspective views for further deployment of negative-emission technologies.

A Review on SAPO-34 Zeolite Materials for CO2 Capture and Conversion

Among several known zeolites, silicoaluminophosphate (SAPO)-34 zeolite exhibits a distinct chemical structure, unique pore size distribution, and chemical, thermal, and ion exchange capabilities, which have recently attracted considerable research attention. Global carbon dioxide (CO₂ ) emissions are a serious environmental issue. Current atmospheric CO₂ level exceeds 414 parts per million (ppm), which greatly influences humans, fauna, flora, and the ecosystem as a whole. Zeolites play a vital role in CO₂ removal, recycling, and utilization. This review summarizes the properties of the SAPO-34 zeolite and its role in CO₂ capture and separation from air and natural gas. In addition, due to their high thermal stability and catalytic nature, CO₂ conversions into valuable products over single metal, bi-metallic, and tri-metallic catalysts and their oxides supported on SAPO-34 were also summarized. Considering these accomplishments, substantial problems related to SAPO-34 are discussed, and future recommendations are offered in detail to predict how SAPO-34 could be employed for greenhouse gas mitigation.

Carbon dioxide capture with zeotype materials

This review describes the application of zeotype materials for the capture of CO2 in different scenarios, the critical parameters defining the adsorption performances, and the challenges of zeolitic adsorbents for CO2 capture.

A lamellar structure zeolite LTA for CO2 capture

Two-dimensional zeolite LTA with a special structure can be used in gas separation.

A Highly Efficient and Stable Composite of Polyacrylate and Metal-Organic Framework Prepared by Interface Engineering for Direct Air Capture

We present a kilogram-scale experiment for assessing the prospects of a novel composite material of metal-organic framework (MOF) and polyacrylates (PA), namely NbOFFIVE-1-Ni@PA, for trace CO₂ capture. Through the interfacial enrichment of metal ions and organic ligands as well as heterogeneous crystallization, the sizes of microporous NbOFFIVE-1-Ni crystals are downsized to 200-400 nm and uniformly anchored on the macroporous surface of PA via interfacial coordination, forming a unique dual-framework structure. Specifically, the NbOFFIVE-1-Ni@PA composite with a loading of 45.8 wt % NbOFFIVE-1-Ni yields a superior CO₂ uptake (ca. 1.44 mol·kg^-1) compared to the pristine NbOFFIVE-1-Ni (ca. 1.30 mol·kg^-1) at 400 ppm and 298 K, indicating that the adsorption efficiency of NbOFFIVE-1-Ni has been raised by 2.42 times. Meanwhile, the time cost for realizing a complete adsorption/desorption cycle in a fluidized bed has been shortened to 25 min, and the working capacity (ca. 0.84 mol·kg^-1) declines only by 1.3% after 2000 cycles. The device is capable of harvesting 2.1 kg of CO₂ per kilogram of composite daily from simulated air with 50% relatively humidity (RH). To the best of our knowledge, the excellent adsorption/desorption performances of NbOFFIVE-1-Ni@PA position it as the most advantageous and practically applicable candidate for trace CO₂ capture.

Design, synthesis, and physicochemical study of a biomass-derived CO2 sorbent 2,5-furan-bis(iminoguanidine)

In this study, the concept of biomass-based direct air capture is proposed, and the aminoguanidine CO2 chemical sorbent 2,5-furan-bis(iminoguanidine) (FuBIG) was designed, synthesized, and elucidated for the physicochemical properties in the process of CO2 capture and release. Results showed that the aqueous solution of FuBIG could readily capture CO2 from ambient air and provided an insoluble tetrahydrated carbonate salt FuBIGH2(CO3) (H2O)4 with a second order kinetics. Hydrogen binding modes of iminoguanidine cations with carbonate ions and water were identified by single-crystal X-ray diffraction analysis. Equilibrium constant (K) and the enthalpies (ΔH) for CO2 absorption/release were obtained by thermodynamic and kinetic analysis (K7 = 5.97 × 104, ΔH7 = -116.1 kJ/mol, ΔH8 = 209.31 kJ/mol), and the CO2-release process was conformed to the geometrical phase-boundary model (1-(1-α)1/3 = kt). It was found that the FuBIGH2(CO3) (H2O)4 can release CO2 spontaneously in DMSO without heating. Zebrafish models revealed a favorable biocompatibility of FuBIG.

Carbon dioxide adsorption based on porous materials

Global warming due to the high concentration of anthropogenic CO2 in the atmosphere is considered one of the world's leading challenges in the 21st century as it leads to severe consequences such as climate change, extreme weather events, ocean warming, sea-level rise, declining Arctic sea ice, and the acidification of oceans. This encouraged advancing technologies that sequester carbon dioxide from the atmosphere or capture those emitted before entering the carbon cycle. Recently, CO2 capture, utilizing porous materials was established as a very favorable route, which has drawn extreme interest from scientists and engineers due to their advantages over the absorption approach. In this review, we summarize developments in porous adsorbents for CO2 capture with emphasis on recent studies. Highly efficient porous adsorption materials including metal-organic frameworks (MOFs), zeolites, mesoporous silica, clay, porous carbons, porous organic polymers (POP), and metal oxides (MO) are discussed. Besides, advanced strategies employed to increase the performance of CO2 adsorption capacity to overcome their drawbacks have been discoursed.

CO2 Adsorption of Materials Synthesized from Clay Minerals: A Review

The aim of this work is to make a brief review of the adsorption of CO2 on modified clay minerals. Previous researchers have used different clay modifications, either by making changes in the structure by a reaction with another product or by the addition of a catalyst to improve their CO2 adsorption capacity. In order to obtain high values of CO2 uptake, some researchers have been incorporated amines-speices such as (3-aminopropyl)triethoxysilane (APTES), tetraethylenepentamine (TEPA) and a branched polyethylenimine (PEI) by grafting or impregnation. The synthesis of an adsorbent from mineral clays can generate an increase in its porosity and in its textural properties. These investigations differ in a number of factors such as the kind of clay, the operating conditions, y and the nature of the impregnated compound. The role of these factors in the CO2 adsorption capacity will be considered in detail in this review.