Electrochemical Reduction of Carbon Dioxide to Formic Acid

Electrochemical hydrocarboxylation of enol derivatives with CO2: access to β-acetoxycarboxylic acids

Electrochemical hydrocarboxylation of enol acetates with CO2 is developed. The disclosed process provides β-acetoxycarboxylic acids in 25-66% yields, in contrast to the electrolysis of ketones, silyl enol ethers and vinyl tosylates with CO2, which leads mainly to alcohols.

Advancing electrocatalytic reactions through mapping key intermediates to active sites via descriptors

Descriptors play a crucial role in electrocatalysis as they can provide valuable insights into the electrochemical performance of energy conversion and storage processes. They allow for the understanding of different catalytic activities and enable the prediction of better catalysts without relying on the time-consuming trial-and-error approaches. Hence, this comprehensive review focuses on highlighting the significant advancements in commonly used descriptors for critical electrocatalytic reactions. First, the fundamental reaction processes and key intermediates involved in several electrocatalytic reactions are summarized. Subsequently, three types of descriptors are classified and introduced based on different reactions and catalysts. These include d-band center descriptors, readily accessible intrinsic property descriptors, and spin-related descriptors, all of which contribute to a profound understanding of catalytic behavior. Furthermore, multi-type descriptors that collectively determine the catalytic performance are also summarized. Finally, we discuss the future of descriptors, envisioning their potential to integrate multiple factors, broaden application scopes, and synergize with artificial intelligence for more efficient catalyst design and discovery.

Reduction of CO2 in the presence of light via excited-state hydride transfer reaction in a NADPH-inspired derivative

The photo-catalytic reduction of CO2 into chemical feedstocks using solar energy has attracted vast interest in environmental science because of global warming. Based on our previous study on the CO2 complex with one of the benzimidazoline (BI) derivatives, we explore the photochemical reduction of CO2 in one of the benzimidazoline derivatives (1,3-dimethyl-5,6-diol-2,3-dihydro-1H-benzimidazole) by quantum-chemical methods. Our results reveal that carbon dioxide can be reduced to formate (HCOO-) by a hydride transfer reaction in the excited state of this complex of benzimidazoline derivative and CO2. While the ground-state hydride transfer reaction in this complex exhibits a substantial barrier, a charge-transfer can occur in the first singlet excited state of the complex in the UV-A region (326 nm), and after overcoming a moderate barrier (∼0.4 eV) the system can have access to the products. The interaction with a polar solvent decreases further the barrier such that the reaction in dimethyl sulfoxide can proceed with a negligibly small barrier (∼0.1 eV) or in a nearly barrierless manner. Our results show that this benzimidazoline derivative may act as a catalyst in the photoreduction of CO2.

Cobalt-Doped Bismuth Nanosheet Catalyst for Enhanced Electrochemical CO2 Reduction to Electrolyte-Free Formic Acid

Electrochemical carbon dioxide (CO2) reduction reaction (CO2RR) to valuable liquid fuels, such as formic acid/formate (HCOOH/HCOO-) is a promising strategy for carbon neutrality. Enhancing CO2RR activity while retaining high selectivity is critical for commercialization. To address this, we developed metal-doped bismuth (Bi) nanosheets via a facile hydrolysis method. These doped nanosheets efficiently generated high-purity HCOOH using a porous solid electrolyte (PSE) layer. Among the evaluated metal-doped Bi catalysts, Co-doped Bi demonstrated improved CO2RR performance compared to pristine Bi, achieving ~90 % HCOO- selectivity and boosted activity with a low overpotential of ~1.0 V at a current density of 200 mA cm-2. In a solid electrolyte reactor, Co-doped Bi maintained HCOOH Faradaic efficiency of ~72 % after a 100-hour operation under a current density of 100 mA cm-2, generating 0.1 M HCOOH at 3.2 V. Density functional theory (DFT) results revealed that Co-doped Bi required a lower applied potential for HCOOH generation from CO2, due to stronger binding energy to the key intermediates OCHO* compared to pure Bi. This study shows that metal doping in Bi nanosheets modifies the chemical composition, element distribution, and morphology, improving CO2RR catalytic activity performance by tuning surface adsorption affinity and reactivity.

Molecular Mechanism for Converting Carbon Dioxide Surrounding Water Microdroplets Containing 1,2,3-Triazole to Formic Acid

Spraying water microdroplets containing 1,2,3-triazole (Tz) has been found to effectively convert gas-phase carbon dioxide (CO2), but not predissolved CO2, into formic acid (FA). Herein, we elucidate the reaction mechanism at the molecular level through quantum chemistry calculations and ab initio molecular dynamics (AIMD) simulations. Computations suggest a multistep reaction mechanism that initiates from the adsorption of CO2 by Tz to form a CO2-Tz complex (named reactant complex (RC)). Then, the RC either is reduced by electrons that were generated at the air-liquid interface of the water microdroplet and then undergoes intramolecular proton transfer (PT) or switches the reduction and PT steps to form a [HCO2-(Tz-H)]- complex (named PC-). Subsequently, PC- undergoes reduction and the C-N bond dissociates to generate COOH- and [Tz-H]- (m/z = 69). COOH- easily converts to HCOOH and is captured at m/z = 45 in mass spectroscopy. Notably, the intramolecular PT step can be significantly lowered by the oriented electric field at the interface and a water-bridge mechanism. The mechanism is further confirmed by testing multiple azoles. The AIMD simulations reveal a novel proton transfer mechanism where water serves as a transporter and is shown to play an important role dynamically. Moreover, the transient •COOH captured by the experiment is proposed to be partly formed by the reaction with H•, pointing again to the importance of the air-water interface. This work provides valuable insight into the important mechanistic, kinetic, and dynamic features of converting gas-phase CO2 to valuable products by azoles or amines dissolved in water microdroplets.

A Quantitative Analysis of Electrochemical CO2 Reduction on Copper in Organic Amide and Nitrile-Based Electrolytes

Aqueous electrolytes used in CO₂ electroreduction typically have a CO₂ solubility of around 34 mM under ambient conditions, contributing to mass transfer limitations in the system. Non-aqueous electrolytes exhibit higher CO₂ solubility (by 5-8-fold) and also provide possibilities to suppress the undesired hydrogen evolution reaction (HER). On the other hand, a proton donor is needed to produce many of the products commonly obtained with aqueous electrolytes. This work investigates the electrochemical CO₂ reduction performance of copper in non-aqueous electrolytes based on dimethylformamide (DMF), n-methyl-2-pyrrolidone (NMP), and acetonitrile (ACN). The main objective is to analyze whether non-aqueous electrolytes are a viable alternative to aqueous electrolytes for hydrocarbon production. Additionally, the effects of aqueous/non-aqueous anolytes, membrane, and the selection of a potential window on the electrochemical CO₂ reduction performance are addressed in this study. Experiments with pure DMF and NMP mainly produced oxalate with a faradaic efficiency (FE) reaching >80%; however, pure ACN mainly produced hydrogen and formate due to the presence of more residual water in the system. Addition of 5% (v/v) water to the non-aqueous electrolytes resulted in increased HER and formate production with negligible hydrocarbon production. Hence, we conclude that aqueous electrolytes remain a better choice for the production of hydrocarbons and alcohols on a copper electrode, while organic electrolytes based on DMF and NMP can be used to obtain a high selectivity toward oxalate and formate.

Upcycling air pollutants to fuels and chemicals via electrochemical reduction technology

The intensification of fossil fuel usage results in significant air pollution levels. Efforts have been put into developing efficient technologies capable of converting air pollution into valuable products, including fuels and valuable chemicals (e.g., CO₂ to hydrocarbon and syngas and NO_x to ammonia). Among the strategic efforts to mitigate the excessive concentration of CO₂ and NO_x pollutants in the atmosphere, the electrochemical reduction technology of CO₂ (CO₂RR) and NO_x (NO_xRR) emerges as one of the most promising approaches. It is even more attractive if CO₂RR and NO_xRR are paired with renewables to store intermittent electricity in the form of chemical feedstocks. This review provides an overview of the electrochemical reduction process to convert CO₂ to C₁ and/or C₂₊ chemicals and NO_x to ammonia (NH₃) with a focus on electrocatalysts, electrolytes, electrolyzer, and catalytic reactor designs toward highly selective electrochemical conversion of the desired products. While the attempts in these aspects are enormous, economic consideration and environmental feasibility for actual implementation are not comprehensively provided. We discuss CO₂RR and NO_xRR from the life cycle and techno-economic analyses to perceive the feasibility of the current achievements. The remaining challenges associated with the industrial implementation of electrochemical CO₂ and NO_x reduction are additionally provided.

Nanomaterials as catalysts for CO2 transformation into value-added products: A review

Carbon dioxide (CO₂₎ is the most important greenhouse gas (GHG), accounting for 76% of all GHG emissions. The atmospheric CO₂ concentration has increased from 280 ppm in the pre-industrial era to about 418 ppm, and is projected to reach 570 ppm by the end of the 21^st century. In addition to reducing CO₂ emissions from anthropogenic activities, strategies to adequately address climate change must include CO₂ capture. To promote circular economy, captured CO₂ should be converted to value-added materials such as fuels and other chemical feedstock. Due to their tunable chemistry (which allows them to be selective) and high surface area (which allows them to be efficient), engineered nanomaterials are promising for CO₂ capturing and/or transformation. This work critically reviewed the application of nanomaterials for the transformation of CO₂ into various fuels, like formic acid, carbon monoxide, methanol, and ethanol. We discussed the literature on the use of metal-based nanomaterials, inorganic/organic nanocomposites, as well as other routes suitable for CO₂ conversion such as the electrochemical, non-thermal plasma, and hydrogenation routes. The characteristics, steps, mechanisms, and challenges associated with the different transformation technologies were also discussed. Finally, we presented a section on the outlook of the field, which includes recommendations for how to continue to advance the use of nanotechnology for conversion of CO₂ to fuels.

Facile Synthesis of Heterogeneous Indium Nanoparticles for Formate Production via CO2 Electroreduction

In this study, a simple and scalable method to obtain heterogeneous indium nanoparticles and carbon-supported indium nanoparticles under mild conditions is described. Physicochemical characterization by X-ray diffraction (XRD), X-ray photoelectron microscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed heterogeneous morphologies for the In nanoparticles in all cases. Apart from In⁰, XPS revealed the presence of oxidized In species on the carbon-supported samples, whereas these species were not observed for the unsupported samples. The best-in-class catalyst (In₅₀/C₅₀) exhibited a high formate Faradaic efficiency (FE) near the unit (above 97%) at -1.6 V vs. Ag/AgCl, achieving a stable current density around -10 mA·cm_geo^-2, in a common H-cell. While In⁰ sites are the main active sites for the reaction, the presence of oxidized In species could play a role in the improved performance of the supported samples.

Electrochemical organic reactions: A tutorial review

Although the core of electrochemistry involves simple oxidation and reduction reactions, it can be complicated in real electrochemical organic reactions. The principles used in electrochemical reactions have been derived using physical organic chemistry, which drives other organic/inorganic reactions. This review mainly comprises two themes: the first discusses the factors that help optimize an electrochemical reaction, including electrodes, supporting electrolytes, and electrochemical cell design, and the second outlines studies conducted in the field over a period of 10 years. Electrochemical reactions can be used as a versatile tool for synthetically important reactions by modifying the constant electrolysis current.

Orange Peel Biomass-derived Carbon Supported Cu Electrocatalysts Active in the CO2 -Reduction to Formic Acid

We report a green, wet chemistry approach towards the production of C-supported Cu electrocatalysts active in the CO₂ reduction to formic acid. We use citrus peels as a C support precursor and as a source of reducing agents for the Cu cations. We show that orange peel is a suitable starting material compared to lemon peel for the one-pot hydrothermal synthesis of Cu nanostructures affording better Cu dispersion as well as productivity and selectivity towards formic acid. We rationalize this finding in terms of the beneficial chemical composition of the orange peel, which favors both the reduction of the Cu precursor as well as the carbon matrix. This work demonstrates new viable opportunities for the reuse of citrus waste on a rational basis.

Electrochemical CO2 Reduction in the Presence of Impurities: Influences and Mitigation Strategies

The electrochemical conversion of waste CO₂ into useful fuels and chemical products is a promising approach to reduce CO₂ emissions; however, several challenges still remain to be addressed. Thus far, most CO₂ reduction studies use pure CO₂ as the gas reactant, but CO₂ emissions typically contain a number of gas impurities, such as nitrogen oxides, oxygen gas, and sulfur oxides. Gas impurities in CO₂ can pose a significant obstacle for efficient CO₂ electrolysis because they can influence the reaction and catalyst. This Minireview highlights early examples of CO₂ reduction studies using mixed-gas feeds, explores strategies to sustain CO₂ reduction in the presence of gas impurities, and discusses their implications for future progress in this emerging field.

Palladium nanoparticles on chitin-derived nitrogen-doped carbon materials for carbon dioxide hydrogenation into formic acid

Utilizing waste carbon resources to produce chemicals and materials is beneficial to mitigate the fossil fuel consumption and the global warming. In this study, ocean-based chitin biomass and waste shrimp shell powders were employed as the feedstock to prepare Pd loaded nitrogen-doped carbon materials as the catalysts for carbon dioxide (CO₂)/bicarbonate hydrogenation into formic acid, which simultaneously converts waste biomass into useful materials and CO₂ into a valuable chemical. Three different preparation methods were examined, and the two-stage calcination was the most efficient one to obtain N-doped carbon material with good physicochemical properties as the best Pd support. The highest formic acid yield was achieved of ∼77% at 100 °C in water with KHCO₃ substrate under optimal condition with a TON of 610. The nitrogen content and N functionalities of the as-synthesized carbon materials were crucial which could serve as anchor sites for the Pd precursor and assist the formation of well-dispersed and small-sized Pd NPs for boosted catalytic activity. The study puts forward a facile, inexpensive and environmentally benign way for simultaneous valorization of oceanic waste biomass and carbon dioxide into valuable products.

Counter Electrode Reactions-Important Stumbling Blocks on the Way to a Working Electro-organic Synthesis

Over the past two decades, electro-organic synthesis has gained significant interest, both in technical and academic research as well as in terms of applications. The omission of stoichiometric oxidizers or reducing agents enables a more sustainable route for redox reactions in organic chemistry. Even if it is well-known that every electrochemical oxidation is only viable with an associated reduction reaction and vice versa, the relevance of the counter reaction is often less addressed. In this Review, the importance of the corresponding counter reaction in electro-organic synthesis is highlighted and how it can affect the performance and selectivity of the electrolytic conversion. A selection of common strategies and unique concepts to tackle this issue are surveyed to provide a guide to select appropriate counter reactions for electro-organic synthesis.

Solubility of CO2 in Aqueous Formic Acid Solutions and the Effect of NaCl Addition: A Molecular Simulation Study

There is a growing interest in the development of routes to produce formic acid from CO₂, such as the electrochemical reduction of CO₂ to formic acid. The solubility of CO₂ in the electrolyte influences the production rate of formic acid. Here, the dependence of the CO₂ solubility in aqueous HCOOH solutions with electrolytes on the composition and the NaCl concentration was studied by Continuous Fractional Component Monte Carlo simulations at 298.15 K and 1 bar. The chemical potentials of CO₂, H₂O, and HCOOH were obtained directly from single simulations, enabling the calculation of Henry coefficients and subsequently considering salting in or salting out effects. As the force fields for HCOOH and H₂O may not be compatible due to the presence of strong hydrogen bonds, the Gibbs-Duhem integration test was used to test this compatibility. The combination of the OPLS/AA force field with a new set of parameters, in combination with the SPC/E force field for water, was selected. It was found that the solubility of CO₂ decreases with increasing NaCl concentration in the solution and increases with the increase of HCOOH concentration. This continues up to a certain concentration of HCOOH in the solution, after which the CO₂ solubility is high and the NaCl concentration has no significant effect.

Demonstration of a three compartment solar electrolyser with gas phase cathode producing formic acid from CO2 and water using Earth abundant metals

A three compartment solar formic acid generator was built using a Sn on Cu foam cathode and NiFe anode. A bipolar combination of a Fumasep FAD-PET-75 and Nafion 117 membrane was mounted between anode and middle compartment, which was filled with Amberlyst 15H ion exchanger beads. A Fumasep FAD-PET-75 membrane separated the middle compartment from the cathode. The generator was powered with a photovoltaic panel and fed with gaseous CO2 and water. Diluted formic acid solution was produced by flowing water through the middle compartment. Common PV-EC devices are operated using aqueous electrolyte and produce aqueous formate. In our PV-EC device, formic acid is produced straight away, avoiding the need for downstream operations to convert formate to formic acid. The electrolyser was matched with solar photovoltaic cells achieving a coupling efficiency as high as 95%. Our device produces formic acid at a faradaic efficiency of ca. 31% and solar-to-formic acid efficiency of ca. 2%. By producing formic acid from CO2 and water without any need of additional chemicals this electrolyser concept is attractive for use at remote locations with abundant solar energy. Formic acid serves as a liquid renewable fuel or chemical building block.

Alloying strategies for tuning product selectivity during electrochemical CO2 reduction over Cu

Excessive reliance on fossil fuels has led to the release and accumulation of large quantities of CO₂ into the atmosphere which has raised serious concerns related to environmental pollution and global warming. One way to mitigate this problem is to electrochemically recycle CO₂ to value-added chemicals or fuels using electricity from renewable energy sources. Cu is the only metallic electrocatalyst that has been shown to produce a wide range of industrially important chemicals at appreciable rates. However, low product selectivity is a fundamental issue limiting commercial applications of electrochemical CO₂ reduction over Cu catalysts. Combining copper with other metals that actively contribute to the electrochemical CO₂ reduction reaction process can selectively facilitate generation of desirable products. Alloying Cu can alter surface binding strength through electronic and geometric effects, enhancing the availability of surface confined carbon species, and stabilising key reduction intermediates. As a result, significant research has been undertaken to design and fabricate copper-based alloy catalysts with structures that can enhance the selectivity of targeted products. In this article, progress with use of alloying strategies for development of Cu-alloy catalysts are reviewed. Challenges in achieving high selectivity and possible future directions for development of new copper-based alloy catalysts are considered.

Influence of biocurrent self-generated by indigenous microorganisms on soil quality

The redox process driven by anaerobic respiration is a link between matter conversion and energy exchange in soil biogeochemistry. Microbial extracellular electron transfer forming biocurrents is a force in element cycling and community living in soil. However, the effect of indigenous microorganisms generating biocurrents on soil quality is unclear. We found that soil biocurrent showed little adverse influence on soil pH, cation exchange capacity, and available nitrogen, phosphorus and potassium and deblocked sequestered organic matter (29%). In addition, the bioelectric field derived from biocurrent obviously forced the migration of mineral elements, which was a supplement to the theory of water-salt transport, providing a new perspective on element transport. Moreover, the soil biocurrent directly regulated the availability of Ca and Fe (increase of 7-fold), indicating that electron transfer plays an important role in weathering and mineralization and thus pedogenesis. From a microbial ecology point of view, the soil bacterial richness and diversity were perfectly restored to their original state when the biocurrent stopped; including bacterial functions; although a temporary enrichment of certain species was observed. The above results provide new insights into the interactions between electron transfer and soil quality and confirm the safety of soil bioelectrochemical technology.

Chemically coupling SnO2 quantum dots and MXene for efficient CO2 electroreduction to formate and Zn-CO2 battery

Electrochemical conversion of CO₂ into formate is a promising strategy for mitigating the energy and environmental crisis, but simultaneously achieving high selectivity and activity of electrocatalysts remains challenging. Here, we report low-dimensional SnO₂ quantum dots chemically coupled with ultrathin Ti₃C₂T_x MXene nanosheets (SnO₂/MXene) that boost the CO₂ conversion. The coupling structure is well visualized and verified by high-resolution electron tomography together with nanoscale scanning transmission X-ray microscopy and ptychography imaging. The catalyst achieves a large partial current density of -57.8 mA cm^-2 and high Faradaic efficiency of 94% for formate formation. Additionally, the SnO₂/MXene cathode shows excellent Zn-CO₂ battery performance, with a maximum power density of 4.28 mW cm^-2, an open-circuit voltage of 0.83 V, and superior rechargeability of 60 h. In situ X-ray absorption spectroscopy analysis and first-principles calculations reveal that this remarkable performance is attributed to the unique and stable structure of the SnO₂/MXene, which can significantly reduce the reaction energy of CO₂ hydrogenation to formate by increasing the surface coverage of adsorbed hydrogen.

Implementation of Formic Acid as a Liquid Organic Hydrogen Carrier (LOHC): Techno-Economic Analysis and Life Cycle Assessment of Formic Acid Produced via CO2 Utilization

To meet the global climate goals agreed upon regarding the Paris Agreement, governments and institutions around the world are investigating various technologies to reduce carbon emissions and achieve a net-negative energy system. To this end, integrated solutions that incorporate carbon utilization processes, as well as promote the transition of the fossil fuel-based energy system to carbon-free systems, such as the hydrogen economy, are required. One of the possible pathways is to utilize CO2 as the base chemical for producing a liquid organic hydrogen carrier (LOHC), using CO2 as a mediating chemical for delivering H2 to the site of usage since gaseous and liquid H2 retain transportation and storage problems. Formic acid is a probable candidate considering its high volumetric H2 capacity and low toxicity. While previous studies have shown that formic acid is less competitive as an LOHC candidate compared to other chemicals, such as methanol or toluene, the results were based on out-of-date process schemes. Recently, advances have been made in the formic acid production and dehydrogenation processes, and an analysis regarding the recent process configurations could deem formic acid as a feasible option for LOHC. In this study, the potential for using formic acid as an LOHC is evaluated, with respect to the state-of-the-art formic acid production schemes, including the use of heterogeneous catalysts during thermocatalytic and electrochemical formic acid production from CO2. Assuming a hydrogen distribution system using formic acid as the LOHC, each of the production, transportation, dehydrogenation, and CO2 recycle sections are separately modeled and evaluated by means of techno-economic analysis (TEA) and life cycle assessment (LCA). Realistic scenarios for hydrogen distribution are established considering the different transportation and CO2 recovery options; then, the separate scenarios are compared to the results of a liquefied hydrogen distribution scenario. TEA results showed that, while the LOHC system incorporating the thermocatalytic CO2 hydrogenation to formic acid is more expensive than liquefied H2 distribution, the electrochemical CO2 reduction to formic acid system reduces the H2 distribution cost by 12%. Breakdown of the cost compositions revealed that reduction of steam usage for thermocatalytic processes in the future can make the LOHC system based on thermocatalytic CO2 hydrogenation to formic acid to be competitive with liquefied H2 distribution if the production cost could be reduced by 23% and 32%, according to the dehydrogenation mode selected. Using formic acid as a LOHC was shown to be less competitive compared to liquefied H2 delivery in terms of LCA, but producing formic acid via electrochemical CO2 reduction was shown to retain the lowest global warming potential among the considered options.

Grazing incidence X-Ray diffraction: identifying the dominant facet in copper foams that electrocatalyze the reduction of carbon dioxide to formate

Copper foams have been shown to electrocatalyze the carbon dioxide reduction reaction (CO₂RR) to formate (HCOO^-) with significant faradaic efficiency (FE) at low overpotentials. Unlike the CO₂RR electrocatalyzed at copper foils, the CO₂RR electrocatalyzed at porous copper foams selects for HCOO^- essentially to the exclusion of hydrocarbon products. Formate is an environmentally friendly organic acid with many applications such as food preservation, textile processing, de-icing, and fuel in fuel cells. Thus, HCOO^- is an attractive product from the CO₂RR if it is produced at an overpotential lower than that at other electrocatalysts. In this study, grazing incidence X-ray diffraction (GIXRD) was used to identify the dominant surface facet of porous copper foams that accounts for its selectivity for HCOO^- during the CO₂RR. Included are data from the CO₂RR at different temperatures using copper foams as the electrocatalyst. Under optimal reaction conditions at 2 °C, the FE for converting CO₂ to HCOO^- at Cu foams approaches 50% while the FE for hydrogen gas (H₂) falls below 40%, a significant departure from that obtained at polycrystalline Cu foils. Computational studies by others have proposed (200) and (111) facets of Cu foils thermodynamically favour methane and other hydrocarbons, CO, HCOO^- from the CO₂RR. Results from the GIXRD studies indicate Cu foams are dominated by the (111) facet, which accounts for the selectivity of Cu foams toward HCOO^- regardless of temperature used for the CO₂RR.

Two electrolyte decomposition pathways at nickel-rich cathode surfaces in lithium-ion batteries

Preventing the decomposition reactions of electrolyte solutions is essential for extending the lifetime of lithium-ion batteries. However, the exact mechanism(s) for electrolyte decomposition at the positive electrode, and particularly the soluble decomposition products that form and initiate further reactions at the negative electrode, are still largely unknown. In this work, a combination of operando gas measurements and solution NMR was used to study decomposition reactions of the electrolyte solution at NMC (LiNi _x Mn _y Co_1-x-y O₂) and LCO (LiCoO₂) electrodes. A partially delithiated LFP (Li _x FePO₄) counter electrode was used to selectively identify the products formed through processes at the positive electrodes. Based on the detected soluble and gaseous products, two distinct routes with different onset potentials are proposed for the decomposition of the electrolyte solution at NMC electrodes. At low potentials (<80% state-of-charge, SOC), ethylene carbonate (EC) is dehydrogenated to form vinylene carbonate (VC) at the NMC surface, whereas at high potentials (>80% SOC), ¹O₂ released from the transition metal oxide chemically oxidises the electrolyte solvent (EC) to form CO₂, CO and H₂O. The formation of water via this mechanism was confirmed by reacting ¹⁷O-labelled ¹O₂ with EC and characterising the reaction products via ¹H and ¹⁷O NMR spectroscopy. The water that is produced initiates secondary reactions, leading to the formation of the various products identified by NMR spectroscopy. Noticeably fewer decomposition products were detected in NMC/graphite cells compared to NMC/Li _x FePO₄ cells, which is ascribed to the consumption of water (from the reaction of ¹O₂ and EC) at the graphite electrode, preventing secondary decomposition reactions. The insights on electrolyte decomposition mechanisms at the positive electrode, and the consumption of decomposition products at the negative electrode contribute to understanding the origin of capacity loss in NMC/graphite cells, and are hoped to support the development of strategies to mitigate the degradation of NMC-based cells.

Recent Advances on CO2 Mitigation Technologies: On the Role of Hydrogenation Route via Green H2

The increasing trend in global energy demand has led to an extensive use of fossil fuels and subsequently in a marked increase in atmospheric CO2 content, which is the main culprit for the greenhouse effect. In order to successfully reverse this trend, many schemes for CO2 mitigation have been proposed, taking into consideration that large-scale decarbonization is still infeasible. At the same time, the projected increase in the share of variable renewables in the future energy mix will necessitate large-scale curtailment of excess energy. Collectively, the above crucial problems can be addressed by the general scheme of CO2 hydrogenation. This refers to the conversion of both captured CO2 and green H2 produced by RES-powered water electrolysis for the production of added-value chemicals and fuels, which are a great alternative to CO2 sequestration and the use of green H2 as a standalone fuel. Indeed, direct utilization of both CO2 and H2 via CO2 hydrogenation offers, on the one hand, the advantage of CO2 valorization instead of its permanent storage, and the direct transformation of otherwise curtailed excess electricity to stable and reliable carriers such as methane and methanol on the other, thereby bypassing the inherent complexities associated with the transformation towards a H2-based economy. In light of the above, herein an overview of the two main CO2 abatement schemes, Carbon Capture and Storage (CCS) and Carbon Capture and Utilization (CCU), is firstly presented, focusing on the route of CO2 hydrogenation by green electrolytic hydrogen. Next, the integration of large-scale RES-based H2 production with CO2 capture units on-site industrial point sources for the production of added-value chemicals and energy carriers is contextualized and highlighted. In this regard, a specific reference is made to the so-called Power-to-X schemes, exemplified by the production of synthetic natural gas via the Power-to-Gas route. Lastly, several outlooks towards the future of CO2 hydrogenation are presented.

Recent progress of Bi-based electrocatalysts for electrocatalytic CO2 reduction

To mitigate excessively accumulated carbon dioxide (CO₂) in the atmosphere and tackle the associated environmental concerns, green and effective approaches are necessary. The electrocatalytic CO₂ reduction reaction (CO₂RR) using sustainable electricity under benign reaction conditions represents a viable way to produce value-added and profitable chemicals. In this minireview, recent studies regarding unary Bi electrocatalysts and binary BiSn electrocatalysts are symmetrically categorized and reviewed, as they disclose high faradaic efficiencies toward the production of formate/formic acid, which has a relatively higher value of up to 0.50 $·per kg and has been widely used in the chemical and pharmaceutical industry. In particular, the preparation methodologies, electrocatalyst morphologies, catalytic performances and the corresponding mechanisms are comprehensively presented. The use of solid-state electrolytes showing high economic prospects for directly obtaining high-purity formic acid is highlighted. Finally, the remaining questions and challenges for CO₂RR exploitations using Bi-related electrocatalysts are proposed, while perspectives and the corresponding strategies aiming to enhance their entire catalytic functionalities and boost their performance are provided.

From formic acid to single-cell protein: genome-scale revealing the metabolic network of Paracoccus communis MA5

With the increase in population growth and environmental pollution, the daily protein supply is facing great challenges. Single-cell protein (SCP) produced by microorganism fermentation is a good alternative for substituting plant- and animal-derived proteins. In this study, Paracoccus communis MA5 isolated from soil previously demonstrated an excellent ability to synthesize SCP directly from sodium formate. To investigate the central metabolic network of formic acid assimilation and protein synthesis, genome-scale analyses were performed. Genomic analysis showed that complete tetrahydrofolate cycle-, serine cycle-, glycolytic pathway-, tricarboxylic acid (TCA) cycle- and nitrogen metabolism-relevant genes were annotated in the genome. These pathways play key roles in the conversion of formic acid into proteins. Transcriptional analysis showed that sodium formate stress could stimulate the metabolic pathway in response to environmental stress, but weaken the sulfur metabolic pathway to inhibit amino acid synthesis, resulting in a decrease in protein content (30% vs 44%). However, under culture conditions with ammonium sulfate, metabolic pathways associated with protein synthesis were accelerated, causing an increase in protein content (53% vs 44%); while the tetrahydrofolate cycle associated with formic acid assimilation was inhibited, causing a 62.5% decrease in growth rate (OD600: 0.21 vs 0.56). These results provide evidence of protein synthesis from sodium formate in strain MA5 at the gene level and lay a theoretical foundation for the optimization of fermentation systems using formic acid as a carbon source.

Thermally stable zinc hydride catalyst for hydrosilylation of CO2 to silyl formate at atmospheric pressure

Neutral zinc complexes supported by H[PNNO], a diaminophenolate ligand bearing a pendant phosphine group, were synthesized and characterized. The phosphine arm adopts two different configurations in solution and prevents aggregation. The monomeric zinc hydride complex is stable at elevated temperatures up to 125 °C and reacts readily with CO₂ to afford a zinc formate complex. The zinc hydride is active for CO₂ hydrosilylation at atmospheric CO₂ pressure and is selective for CO₂ reduction to the silyl-formate product.

Electrocatalytic Reduction of CO2 in Water by a Palladium-Containing Metallopolymer

The palladium–salen complex was immobilized by electropolymerization onto a Pt disc electrode and applied as an electrocatalyst for the reduction of CO2 in an aqueous solution. Linear sweep voltammetry measurements and rotating disk experiments were carried out to study the electrochemical reduction of carbon dioxide. The onset overpotential for carbon dioxide reduction was approximately −0.22 V vs. NHE on the poly-Pd(salen) modified electrode. In addition, by combining the electrochemical study with a kinetic study, the rate-determining step of the electrochemical CO2 reduction reaction (CO2RR) was found to be the radial reduction of carbon dioxide to the CO adsorbed on the metal.

Impact of electrochemical reducing power on homoacetogenesis

Homoacetogenesis was performed in a microbial electrosynthesis single-chamber reactor at open and closed circuits modes. The aim is to investigate how an applied reducing power affects acetic acid synthesis and H₂ gas-liquid mass transfer. At a cathode voltage of -175 mV vs. Ag/AgCl (3.0 NaCl), the acetic acid synthesis rate ramped up to 0.225 mmol L^-1h^-1 due to additional electrons and protons liberation from carbon-free sources such as water and ammonium via anodic oxidation. The study sets a new lowest benchmark that acetic acid can be bioelectrochemical synthesized at - 175 mV. The applied reducing power did not increase the H₂ gas-liquid mass transfer because the direct electron transfer from cathode to microorganisms reduced the demand for H₂ in the fermentation medium. Microbial analysis shows a high presence of Veillonellaceae spore-forming clostridia, which are identified as homoacetogens.

Copper-catalysed exclusive CO2 to pure formic acid conversion via single-atom alloying

Converting CO₂ emissions, powered by renewable electricity, to produce fuels and chemicals provides an elegant route towards a carbon-neutral energy cycle. Progress in the understanding and synthesis of Cu catalysts has spurred the explosive development of electrochemical CO₂ reduction (CO₂RR) technology to produce hydrocarbons and oxygenates; however, Cu, as the predominant catalyst, often exhibits limited selectivity and activity towards a specific product, leading to low productivity and substantial post-reaction purification. Here, we present a single-atom Pb-alloyed Cu catalyst (Pb₁Cu) that can exclusively (~96% Faradaic efficiency) convert CO₂ into formate with high activity in excess of 1 A cm^-2. The Pb₁Cu electrocatalyst converts CO₂ into formate on the modulated Cu sites rather than on the isolated Pb. In situ spectroscopic evidence and theoretical calculations revealed that the activated Cu sites of the Pb₁Cu catalyst regulate the first protonation step of the CO₂RR and divert the CO₂RR towards a HCOO* path rather than a COOH* path, thus thwarting the possibility of other products. We further showcase the continuous production of a pure formic acid solution at 100 mA cm^-2 over 180 h using a solid electrolyte reactor and Pb₁Cu.

Spontaneously Sn-Doped Bi/BiOx Core-Shell Nanowires Toward High-Performance CO2 Electroreduction to Liquid Fuel

Electrochemical CO₂ reduction provides a promising strategy to product value-added fuels and chemical feedstocks. However, it remains a grand challenge to further reduce the overpotentials and increase current density for large-scale applications. Here, spontaneously Sn doped Bi/BiOx nanowires (denoted as Bi/Bi(Sn)O_x NWs) with a core-shell structure were synthesized by an electrochemical dealloying strategy. The Bi/Bi(Sn)O_x NWs exhibit impressive formate selectivity over 92% from -0.5 to -0.9 V versus reversible hydrogen electrode (RHE) and achieve a current density of 301.4 mA cm^-2 at -1.0 V vs RHE. In-situ Raman spectroscopy and theoretical calculations reveal that the introduction of Sn atoms into BiO_x species can promote the stabilization of the *OCHO intermediate on the Bi(Sn)O_x surface and suppress the competitive H₂/CO production. This work provides effective in situ construction of the metal/metal oxide hybrid composites with heteroatom doping and new insights in promoting electrochemical CO₂ conversion into formate for practical applications.

Hollow Pd/Te nanorods for the effective electrooxidation of methanol

Methanol electrooxidation is significant in realizing effective C1 liquid fuel applications. Herein, hollow Pd/Te nanorods were fabricated and evaluated for methanol oxidation, and they were found to exhibit high catalytic efficiency for methanol oxidation in alkaline electrolyte compared to Pd or Pd/C catalysts. The hybrid structure of hexagonal crystal Te and face-centered cubic Pd was formed by microwave assisted Pd nanoparticle deposition over the surface of Te nanorods. Strong electronic effects and facile oxophilic properties were indicated in the Pd/Te system by spectroscopic analysis, which mainly accounts for the high catalytic performance for methanol oxidation. Specifically, they showed a peak current density of 90.1 mA cm^-2 for methanol oxidation, around 3.5 times higher than that of commercial Pd/C (26.3 mA cm^-2). High catalytic stability was also observed for Pd/Te, with a current retention of 64.3% after 3600 s of chronoamperometric testing, much higher than for Pd catalysts (20.1%). High anti-CO poisoning ability of the Pd/Te catalyst was demonstrated in the CO-stripping voltammetry results, and faster catalytic kinetics were also observed for this catalyst system. The electron-rich state of Pd and high active site exposure are responsible for the high performance of the Pd/Te catalyst in methanol oxidation.

Research Progress in Organic Synthesis by Means of Photoelectrocatalysis

The rapid development of radical chemistry has spurred several innovative strategies for organic synthesis. The novel approaches for organic synthesis play a critical role in promoting and regulating the single-electron redox activity. Among them, photoelectrocatalysis (PEC) has attained considerable attention as the most promising strategy to convert organic compounds into fine chemicals. This review highlights the current progress in organic synthesis through PEC, including various catalytic reactions, catalyst systems and practical applications. The numerous catalytic reactions suffer the high overpotential and poor conversion efficiency, depending on the design of electrolyzers and the reaction mechanisms. We also considered the recent developments with special emphasis on scientific problems and efficient solutions, which enhance accessibility to utilize and further develop the photoelectrocatalytic technology for the specific chemical bonds formation and the fabrication of numerous catalytic systems.

DFT and Empirical Considerations on Electrocatalytic Water/Carbon Dioxide Reduction by CoTMPyP in Neutral Aqueous Solutions*

A combined experimental and density functional theory (DFT) investigation was employed in order to examine the mechanism of electrochemical CO₂ reduction and H₂ formation from water reduction in neutral aqueous solutions. A water soluble cobalt porphyrin, cobalt [5,10,15,20-(tetra-N-methyl-4-pyridyl)porphyrin], (CoTMPyP), was used as catalyst. The possible attachment of different axial ligands as well as their effect on the electrocatalytic cycles were examined. A cobalt porphyrin hydride is a key intermediate which is generated after the initial reduction of the catalyst. The hydride is involved in the formation of H₂ and formate and acts as an indirect proton source for the formation of CO in these H⁺ -starving conditions. The experimental results are in agreement with the computations and give new insights into electrocatalytic mechanisms involving water soluble metalloporphyrins. We conclude that in addition to the porphyrin's structure and metal ion center, the electrolyte surroundings play a key role in dictating the products of CO₂ /H₂ O reduction.