CoSe2Supported on Nitrogen-Doped Carbon Nanohorns as a Methanol-Tolerant Cathode for Air-Breathing Microlaminar Flow Fuel Cells

Suppression of Methanol and Formate Crossover through Sulfanilic-Functionalized Holey Graphene as Proton Exchange Membranes

Proton exchange membranes with high proton conductivity and low crossover of fuel molecules are required to realize advanced fuel-cell technology. The selective transportation of protons, which occurs by blocking the transportation of fuel molecules across a proton exchange membrane, is crucial to suppress crossover while maintaining a high proton conductivity. In this study, a simple yet powerful method is proposed for optimizing the crossover-conductivity relationship by pasting sulfanilic-functionalized holey graphenes onto a Nafion membrane. The results show that the sulfanilic-functionalized holey graphenes supported by the membrane suppresses the crossover by 89% in methanol and 80% in formate compared with that in the self-assembled Nafion membrane; an ≈60% reduction is observed in the proton conductivity. This method exhibits the potential for application in advanced fuel cells that use methanol and formic acid as chemical fuels to achieve high energy efficiency.

Rhodium effects on Pt anode materials in a direct alkaline ethanol fuel cell

The development of efficient catalysts for ethanol oxidation in alkaline medium requires a synthetic approach that may prevent the surfactant molecules from being adsorbed at the catalytic sites and decreasing the electrochemical performance of the final direct ethanol fuel cell. Toward this goal, the recently reported surfactant-less Bromide Anion Exchange (BAE) method, appears as a promising route to conveniently aim at preparing PtRh alloys dispersed on carbon substrates. The catalysts prepared herein by the BAE method were characterized physicochemically to obtain structural information on the PtRh/C nanomaterials, their morphology (size and shape), and their chemical and surface composition. Electrochemical behavior and properties of these electrodes were then investigated in a half-cell before the implementation of a direct ethanol fuel cell (DEFC) in a home-made anion exchange membrane Teflon cell. The analysis of the electrolytic solution in the anodic compartment by chromatography revealed that acetate was the major reaction product and the carbonate amount increased with the Rh content in the bimetallic composition. With 2.8–3.6 nm particle sizes, the Pt₅₀Rh₅₀/C catalyst exhibited the highest activity towards the ethanol electrooxidation.

The development of efficient catalysts for ethanol oxidation in alkaline medium requires an approach that avoids surfactant molecules from being adsorbed at active sites and decreasing the electrochemical performance of the direct ethanol fuel cell.

Carbon Nanohorn-Based Electrocatalysts for Energy Conversion

In the context of even more growing energy demands, the investigation of alternative environmentally friendly solutions, like fuel cells, is essential. Given their outstanding properties, carbon nanohorns (CNHs) have come forth as promising electrocatalysts within the nanocarbon family. Carbon nanohorns are conical nanostructures made of sp2 carbon sheets that form aggregated superstructures during their synthesis. They require no metal catalyst during their preparation and they are inexpensively produced in industrial quantities, affording a favorable candidate for electrocatalytic reactions. The aim of this article is to provide a comprehensive overview regarding CNHs in the field of electrocatalysis and especially, in oxygen reduction, methanol oxidation, and hydrogen evolution, as well as oxygen evolution from water splitting, underlining the progress made so far, and pointing out the areas where significant improvement can be achieved.

Cobalt-Based Multicomponent Oxygen Reduction Reaction Electrocatalysts Generated by Melamine Thermal Pyrolysis with High Performance in an Alkaline Hydrogen/Oxygen Microfuel Cell

A series of cobalt-based multicomponent electrocatalysts (Co-Cat-T) for the oxygen reduction reaction (ORR) were synthesized by thermal pyrolysis of activated carbon-supported cobalt and melamine mixture from 500 to 800 °C. Their corresponding electrocatalytic performance was systematically investigated toward ORR in an alkaline electrolyte. The electrocatalyst chemical composition and structure evolution (e.g., microstrain, crystallite size, and cell volume) were confirmed by X-ray diffraction Rietveld analyses. The material generated at 550 °C (Co-Cat-T550) showed the largest cell volume of the C₃N₄ phase with a crystallite size of 4.1 ± 0.1 nm. Independent of the heat-treatment temperature, the cobalt atom was coordinated to nitrogen moieties. The following findings: cobalt inserted in the carbon nitride framework (Co-g-C₃N₄), abundant Co-N_x and pyridinic-N species, unique encapsulated cross-tubular structure, and disordered carbon domains performed better in the ORR with Co-Cat-T550 among the obtained electrocatalysts. In addition, Co-Cat-T550 showed performance comparable to Pt/C in an alkaline hydrogen/oxygen microfuel cell platform.

Recent Advances of Cobalt-Based Electrocatalysts for Oxygen Electrode Reactions and Hydrogen Evolution Reaction

This review summarizes recent progress in the development of cobalt-based catalytic centers as the most potentially useful alternatives to noble metal-based electrocatalysts (Pt-, Ir-, and Ru-based) towards the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) in acid and alkaline media. A series of cobalt-based high-performance electrocatalysts have been designed and synthesized including cobalt oxides/chalcogenides, Co–Nx/C, Co-layered double hydroxides (LDH), and Co–metal-organic frameworks (MOFs). The strategies of controllable synthesis, the structural properties, ligand effect, defects, oxygen vacancies, and support materials are thoroughly discussed as a function of the electrocatalytic performance of cobalt-based electrocatalysts. Finally, prospects for the design of novel, efficient cobalt-based materials, for large-scale application and opportunities, are encouraged.

MOF-Templated N-Doped Carbon-Coated CoSe2 Nanorods Supported on Porous CNT Microspheres with Excellent Sodium-Ion Storage and Electrocatalytic Properties

Three-dimensional (3D) porous microspheres composed of CoSe₂@N-doped carbon nanorod-deposited carbon nanotube (CNT) building blocks (CoSe₂@NC-NR/CNT) can be successfully synthesized using CNT/Co-based metal-organic framework (ZIF-67) porous microspheres as a precursor. This strategy involves the homogeneous coating of ZIF-67 polyhedrons onto porous CNT microspheres prepared by spray pyrolysis and further selenization of the composites under an Ar/H₂ atmosphere. During the selenization process, the ZIF-67 polyhedrons on the CNT backbone are transformed into N-doped carbon-coated CoSe₂ nanorods by a directional recrystallization process, resulting in a homogeneous deposition of CoSe₂@NC nanorods on the porous CNT microspheres. Such a unique structure of CoSe₂@NC-NR/CNT microspheres facilitates the transport of ions, electrons, and mass and provides a conductive pathway for electrons during electrochemical reactions. Correspondingly, the composite exhibits a superior dual functionality as both an electrocatalyst for the hydrogen evolution reaction (HER) and an electrode for sodium-ion batteries (SIBs). The CoSe₂@NC-NR/CNT microspheres exhibit a small Tafel slope (49.8 mV dec^-1) and a superior stability for HER. Furthermore, the composite delivers a high discharge capacity of 555 mA h g^-1 after 100 cycles at a current density of 0.2 A g^-1 and a good rate capability for SIBs.