Self-Supporting and Binder-Free Anode Film Composed of Beaded Stream-Like Li4Ti5O12Nanoparticles for High-Performance Lithium-Ion Batteries

Synthesis of Li4 Ti5 O12 with Tunable Morphology Using l-Cysteine and Its Enhanced Lithium Storage Properties

Nitrogen and sulfur co-doped carbon-coated Li₄ Ti₅ O₁₂ (denoted as LTO/NSC) was developed to enhance the electrochemical performance of LTO material. l-Cysteine served as both the carbon source and the heteroatom doping source. The morphology of LTO was tuned by Ti-C bond formation during carbonation process, accompanied by a change in the original orientation growth of the LTO lattice plane. Consequently, LTO transformed from nanosheets to nanoparticles. SEM data proved that the structure of LTO/NSC nanoparticles was more stable than that of LTO nanosheets after hundreds of charge/discharge process. The N,S co-doped carbon layer can moderate particle aggregation and may help to shorten the electron transport length and enhance lithium storage capacity. The structural superiority and the N,S co-doped carbon layer endows LTO/NSC particles with high reversible specific capacity (183 mA h g^-1 at 0.1 C), significantly enhanced rate capability (122 mA h g^-1 at 10 C) and excellent cycling stability (capacity retention of 96.3 % after 200 cycles) relative to these features of LTO nanosheets. Thus, LTO/NSC is a promising anode material for high-performance lithium ion batteries.

Hierarchical TiN nanoparticles-assembled nanopillars for flexible supercapacitors with high volumetric capacitance

Titanium nitride (TiN) is an attractive electrode material in fast charging/discharging supercapacitors because of its excellent conductivity. However, the low capacitance and mechanical brittleness of TiN restricts its further application in flexible supercapacitors with high energy density. Thus, it is still a challenge to rationally design TiN electrodes with both high electrochemical and mechanical properties. Herein, the hierarchical TiN nanoparticles-assembled nanopillars (H-TiN NPs) array as binder free electrodes were obtained by nitriding of hierarchical titanium dioxide (TiO2) nanopillars, which was produced by a simple hydrothermal treatment of anodic TiO2 nanotubes (NTs) array in water. The porous TiN nanoparticles connected to each other to form ordered nanopillar arrays, effectively providing larger specific surface area and more active sites for charge storage. The H-TiN NPs delivered a high volumetric capacitance of 120 F cm-3 at 0.83 A cm-3, which is better than that of TiN NTs arrays (69 F cm-3 at 0.83 A cm-3). After assembling into all-solid-state devices, the H-TiN NPs based supercapacitors exhibited outstanding volumetric capacitance of 5.9 F cm-3 at 0.02 A cm-3 and a high energy density of 0.53 mW h cm-3. Our results reveal a new strategy to optimize the supercapacitive performance of metal nitrides.

Review of Water-Assisted Crystallization for TiO2 Nanotubes

TiO₂ nanotubes (TNTs) have drawn tremendous attention owing to their unique architectural and physical properties. Anodizing of titanium foil has proven to be the most efficient method to fabricate well-aligned TNTs, which, however, usually produces amorphous TNTs and needs further thermal annealing. Recently, a water-assisted crystallization strategy has been proposed and investigated by both science and engineering communities. This method is very efficient and energy saving, and it circumvents the drawbacks of thermal sintering approach. In this paper, we review the recent research progress in this kind of low-temperature crystallization approach. Here, various synthetic methods are summarized, and the mechanisms of the amorphous-crystalline transformation are analyzed. The fundamental properties and applications of the low-temperature products are also discussed. Furthermore, it is proved that the water-assisted crystallization approach is not only applicable to TNTs but also to crystallizing other metal oxides.

Li4 Ti5 O12 Anode: Structural Design from Material to Electrode and the Construction of Energy Storage Devices

Spinel Li₄ Ti₅ O₁₂ , known as a zero-strain material, is capable to be a competent anode material for promising applications in state-of-art electrochemical energy storage devices (EESDs). Compared with commercial graphite, spinel Li₄ Ti₅ O₁₂ offers a high operating potential of ∼1.55 V vs Li/Li⁺ , negligible volume expansion during Li⁺ intercalation process and excellent thermal stability, leading to high safety and favorable cyclability. Despite the merits of Li₄ Ti₅ O₁₂ been presented, there still remains the issue of Li₄ Ti₅ O₁₂ suffering from poor electronic conductivity, manifesting disadvantageous rate performance. Typically, a material modification process of Li₄ Ti₅ O₁₂ will be proposed to overcome such an issue. However, the previous reports have made few investigations and achievements to analyze the subsequent processes after a material modification process. In this review, we attempt to put considerable interest in complete device design and assembly process with its material structure design (or modification process), electrode structure design and device construction design. Moreover, we have systematically concluded a series of representative design schemes, which can be divided into three major categories involving: (1) nanostructures design, conductive material coating process and doping process on material level; (2) self-supporting or flexible electrode structure design on electrode level; (3) rational assembling of lithium ion full cell or lithium ion capacitor on device level. We believe that these rational designs can give an advanced performance for Li₄ Ti₅ O₁₂ -based energy storage device and deliver a deep inspiration.