Progress of the Electrochemiluminescence Biosensing Strategy for Clinical Diagnosis with Luminol as the Sensing Probe

Bright luminol electrochemiluminescence mediated by a simple TEMPO radical for visualized multiplex detection

In this work, a series of 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO) radicals bearing different functional groups were exploited as a simple catalyst to promote electrochemiluminescence (ECL) generation in luminol/H2O2 system. These TEMPO radicals were found to facilitate the electrochemical oxidation of H2O2 and luminol through different catalytic mechanisms, as well as the subsequent ECL generation of luminol/H2O2 system. The electrochemical oxidation and luminol ECL generation could be tuned by the functional group on the para-position of TEMPO, for which the structure/activity relationship was revealed. Finally, with the combination of enzymatic system, luminol ECL enhancement up to 9.6-fold was obtained through the catalysis of 4-hydroxyl-TEMPO. The enhanced luminol ECL allows acquiring brighter ECL images in a single-electrochemical system (SEES) for multiplex detection of cholesterol, H2O2 and glucose.

Facile electrochemiluminescence sensing platform based on Gd2O3:Eu3+ nanocrystals for organophosphorus pesticides detection in vegetable samples

In this work, europium ion-doped gadolinium trioxide nanocrystals (Gd2O3:Eu3+ NCs) were successfully synthesized and applied to construct an electrochemiluminescence (ECL) sensor. Compared with pure Gd2O3, the doping of Eu3+ ions caused enhanced ECL intensity and more stable signals. Based on the excellent ECL performance of Gd2O3:Eu3+ NCs, we constructed a new ECL sensing platform for the detection of organophosphorus pesticides (OPs). The ECL sensor showed a good linear relationship in the concentration range of 1 nM to 1 pM, with a limit of detection of 0.12 pM (S/N = 3) for dichlorvos (DDVP). In addition, the constructed ECL sensor was applied for the detection of DDVP in vegetable samples, and good recoveries were obtained. The results indicated that the ECL sensor exhibited fantastic performance properties and had good application prospects in OPs detection.

Versatile MXene composite probe-mediated homogeneous electrochemiluminescence biosensor with integrated signal transduction and near-infrared modulation strategy for concanavalin A detection

Based on the highly specific interaction between concanavalin A (Con A) and glucose (Glu), a competitive electrochemiluminescence (ECL) biosensor was constructed for ultrasensitive detection of Con A. Nanocomposites with excellent electrocatalytic and photothermal properties were obtained by covalently bonding zinc oxide quantum dots (ZnO QDs) to vanadium carbide MXene (V2C MXene) surfaces. The modification of ZnO QDs hinders the aggregation of V2C MXene and increases the catalytic activity of oxygen reduction reaction, thus amplifying the luminol cathodic emission. In addition, the excellent photothermal performance of the V2C MXene-ZnO QDs can convert light energy into heat energy under the irradiation of 808 nm near infrared laser, thus increasing the temperature of the reaction system and accelerating the electron transfer process to realize the synergistic amplified homogeneous ECL system. This innovative work not only enriches the fundamental research on multifunctional MXene nanomaterials for biosensing, but also provides an effective strategy for ECL signal amplification.

Newly Developed Electrochemiluminescence Based on Bipolar Electrochemistry for Multiplex Biosensing Applications: A Consolidated Review

Recently, there has been an upsurge in the extent to which electrochemiluminescence (ECL) working in synergy with bipolar electrochemistry (BPE) is being applied in simple biosensing devices, especially in a clinical setup. The key objective of this particular write-up is to present a consolidated review of ECL-BPE, providing a three-dimensional perspective incorporating its strengths, weaknesses, limitations, and potential applications as a biosensing technique. The review encapsulates critical insights into the latest and novel developments in the field of ECL-BPE, including innovative electrode designs and newly developed, novel luminophores and co-reactants employed in ECL-BPE systems, along with challenges, such as optimization of the interelectrode distance, electrode miniaturization and electrode surface modification for enhancing sensitivity and selectivity. Moreover, this consolidated review will provide an overview of the latest, novel applications and advances made in this field with a bias toward multiplex biosensing based on the past five years of research. The studies reviewed herein, indicate that the technology is rapidly advancing at an outstanding purse and has an immense potential to revolutionize the general field of biosensing. This perspective aims to stimulate innovative ideas and inspire researchers alike to incorporate some elements of ECL-BPE into their studies, thereby steering this field into previously unexplored domains that may lead to unexpected, interesting discoveries. For instance, the application of ECL-BPE in other challenging and complex sample matrices such as hair for bioanalytical purposes is currently an unexplored area. Of great significance, a substantial fraction of the content in this review article is based on content from research articles published between the years 2018 and 2023.

Determination of chloramphenicol in food using nanomaterial-based electrochemical and optical sensors-A review

Chloramphenicol (CAP) is a widely used antibiotic for the treatment of sick animals owing to its potent action and low cost. However, the accumulation of CAP in the human body can cause irreversible aplastic anemia and hematopoietic toxicity. Accordingly, development of various analytical techniques for the rapid detection of CAP in animal products and the related processed foods is necessary. Among these analytical techniques, electrochemical and optical sensors offer many advantages for CAP detection, including high sensitivity, simple operation and fast analysis speed. In this review, we summarize recent application of carbon nanomaterials, metal nanoparticles, metal oxide nanoparticles and metal organic framework in the development of electrochemical and optical sensors for CAP detection (2010-2022). Based on the advantages and disadvantages of nanomaterials, electrochemical and optical sensors are summarized in this review. The preparation and synthesis of electrochemical and optical sensors and nanomaterials in the field of rapid detection are prospected.

Smartphone-based 3D-printed electrochemiluminescence enzyme biosensor for reagentless glucose quantification in real matrices

Three-dimensional (3D) printed electrochemical devices are increasingly used in point-of-need and point-of-care testing. They show several advantages such as simple fabrication, low cost, fast response, and excellent selectivity and sensitivity in small sample volumes. However, there are only a few examples of analytical devices combining 3D-printed electrodes with electrochemiluminescence (ECL) detection, an electrochemical detection principle widely employed in clinical chemistry analysis. Herein, a portable, 3D-printed miniaturized ECL biosensor for glucose detection has been developed, based on the luminol/H₂O₂ ECL system and employing a two-electrode configuration with carbon black-doped polylactic acid (PLA) electrodes. The ECL emission is obtained by means of a 1.5V AA alkaline battery and detected using a smartphone camera, thus providing easy portability of the analytical platform. The ECL system was successfully applied for sensing H₂O₂ and, upon coupling the luminol/H₂O₂ system with the enzyme glucose oxidase, for glucose detection. The incorporation of luminol and glucose oxidase in an agarose hydrogel matrix allowed to produce ECL devices preloaded with the reagents required for the assay, so that the analysis only required sample addition. The ECL biosensor showed an excellent ability to detect glucose up to 5 mmol L^-1, with a limit of detection of 60 μmol L^-1. The biosensor was also used to analyse real samples (i.e., glucose saline solutions and artificial serum samples) with satisfactory results, thus suggesting its suitability for point-of-care analysis. Coupling with other oxidases could further extend the applicability of this analytical platform.

Recent advances and challenges in developing electrochemiluminescence biosensors for health analysis

This Feature Article simply introduces principles and mechanisms of electrochemiluminescence (ECL) biosensors for the determination of biomarkers and highlights recent advances of ECL biosensors on key aspects including new ECL reagents and materials, new biological recognition elements, and emerging construction biointerfacial strategies with illustrative examples and a critical eye on pitfalls and discusses challenges and perspectives of ECL biosensors for health analysis.

Assembled Photonic Crystal/Gold Nanoparticle Interface: A Dual Amplifying Electrochemiluminescent Aptasensor for the Ultrasensitive Detection of an Amyloid-β Monomer

Amyloid-β (Aβ) protein is considered to be a key biomarker that is closely associated with Alzheimer's disease (AD). The level of Aβ, particularly its subtle fluctuation, indicates early neuropathological changes, which poses a considerable challenge in predicting AD, considering the detection limit of sensing technologies. Herein, a new label-free sensor based on luminol electrochemiluminescence (ECL) was proposed by developing a close-packed monolayered-SiO2 array with gold (Au) nanoparticles (NPs) entrapped in their gaps as the basal electrode. The well-organized SiO2 NPs with a quasiphotonic crystal structure amplified the ECL signal via light scattering, while Au NPs amplified the signal by directly catalyzing luminol oxidation. Owing to the dual signal amplification, the proposed electrode furnished an ∼64-fold-intensified ECL signal of luminol as the sensing background. Further, the as-prepared ECL electrode served as the substrate to develop an aptasensor for the sensitive detection of Aβ. The inhibition of the ECL signal due to the suppressed diffusion of luminol to the sensor surface acts as an indicator to quantify the amount of Aβ. The transfer dynamics mechanism provides a label-free sensing strategy and facilitates the high sensitivity of the aptasensor for Aβ detection. Under optimal conditions, the developed aptasensor exhibits an ultrasensitive performance for Aβ with a very low limit of detection of 5 fM, providing a new prospect for clinical research on Aβ and a promising approach in the field of ECL sensing.

High-Intensity Focused Ultrasound Combined with Ti3C2-TiO2 to Enhance Electrochemiluminescence of Luminol for the Sensitive Detection of Polynucleotide Kinase

Luminol is a classic electrochemiluminescence (ECL) luminophore. The luminol-O₂ ECL system suffers from a problem, that is, the conversion rate of dissolved O₂ into reactive oxygen species (ROS) is low. In this work, we used high-intensity focused ultrasound (HIFU) pretreatment combined with Ti₃C₂-TiO₂ to construct a highly sensitive luminol-O₂ ECL system for the specific detection of polynucleotide kinase (PNK) first. On the one hand, HIFU generated ROS in situ as a coreactant via the cavitation effect to boost the luminol emission. On the other hand, Ti₃C₂-TiO₂ was prepared in situ via Ti₃C₂ as a reducing agent, and it can aggregate and catalyze ROS generated in situ by HIFU. Moreover, the Ti on the Ti₃C₂-TiO₂ surface could bind to phosphate groups through chelation, thereby realizing highly specific detection of PNK. The sensor has a linear relationship range of 1.0 × 10^-5 to 10.0 U mL^-1, and the limit of detection is 1.48 × 10^-7 U mL^-1, which is superior to most existing methods. The sensor performance in HeLa cell lysate was measured with a satisfactory result. The designed ECL biosensor has potential applications in biological analysis and clinical diagnosis.

Voltammetric Study and Modeling of the Electrochemical Oxidation Process and the Adsorption Effects of Luminol and Luminol Derivatives on Glassy Carbon Electrodes

Luminol is one of the most widely used electrochemiluminescence (ECL) reagents, yet the detailed mechanism and kinetics of the electrochemical oxidation of luminol remain unclear. We propose a model that describes the electrochemical oxidation of luminol as multiple electron transfer reactions followed by an irreversible chemical reaction, and we applied a finite element method simulation to analyze the electron transfer kinetics in alkaline solutions. Although negligible at higher pH values, the adsorption of luminol on the glassy carbon electrode became noticeable in a solution with pH = 12. Additionally, various types of adsorption behaviors were observed for luminol derivatives and analogues, indicating that the molecular structure affected not only the oxidation but also the adsorption process. The adsorption effect was analyzed through a model with a Langmuir isotherm to show that the saturated surface concentration as well as the reaction kinetics increased with decreasing pH, suggesting a competition for the active sites between the molecule and OH^-. Moreover, we show that the ECL intensity could be boosted through the adsorption effect by collecting the ECL intensity generated through the electrochemical oxidation of luminol and a luminol analogue, L012, in a solution with pH = 13. In contrast with luminol, a significant adsorption effect was observed for L012 at pH = 13, and the ECL intensity was enhanced by the adsorbed species, especially at higher scan rates. The magnitude of the enhancement of the ECL intensity matched well with the simulation using our model.

Advances in electrochemiluminescence for single-cell analysis

Recent years have witnessed the emergence of innovative analytical methods with high sensitivity and spatiotemporal resolution that allowed qualitative and quantitative analysis to be carried out at single-cell and subcellular levels. Electrochemiluminescence (ECL) is a unique chemiluminescence of high-energy electron transfer triggered by electrical excitation. The ingenious combination of electrochemistry and chemiluminescence results in the distinct advantages of high sensitivity, a wide dynamic range and good reproducibility. Specifically, single-cell ECL (SCECL) analysis with excellent spatiotemporal resolution has emerged as a promising toolbox in bioanalysis for revealing individual cells' heterogeneity and stochastic processes. This review focuses on advances in SCECL analysis and bioimaging. The history and recent advances in ECL probes and strategies for system design are briefly reviewed. Subsequently, the latest advances in representative SCECL analysis techniques for bioassays, bioimaging and therapeutics are also highlighted. Then, the current challenges and future perspectives are discussed.

Microfluidic platforms integrated with nano-sensors for point-of-care bioanalysis

Microfluidic technology provides a portable, cost-effective, and versatile tool for point-of-care (POC) bioanalysis because of its associated advantages such as fast analysis, low volumes of reagent consumption, and high portability. Along with microfluidics, the application of nanomaterials in biosensing has attracted lots of attention due to their unique physical and chemical properties for enhanced signal modulation such as signal amplification and signal transduction for POC bioanalysis. Hence, an enormous number of microfluidic devices integrated with nano-sensors have been developed for POC bioanalysis targeting low-resource settings. Herein, we review recent advances in POC bioanalysis on nano-sensor-based microfluidic platforms. We first briefly summarized the different types of cost-effective microfluidic platforms, followed by a concise introduction to nanomaterial-based biosensors. Then, we highlighted the application of microfluidic platforms integrated with nano-sensors for POC bioanalysis. Finally, we discussed the current limitations and perspective trends of the nano-sensor-based microfluidic platforms for POC bioanalysis.

Improvement of the signal to noise ratio for fluorescent imaging in microfluidic chips

Microfluidics systems can be fabricated in various ways using original silicon glass systems, with easy Si processing and surface modifications for subsequent applications such as cell seeding and their study. Fluorescent imaging of cells became a standard technique for the investigation of cell behavior. Unfortunately, high sensitivity fluorescent imaging, e.g., using total internal reflection fluorescence (TIRF) microscopy, is problematic in these microfluidic systems because the uneven surfaces of the silicon channels' bottoms affect light penetration through the optical filters. In this work, we study the nature of the phenomenon, finding that the problem can be rectified by using a silicon-on-insulator (SOI) substrate, defining the channel depth by the thickness of the top Si layer, and halting the etching at the buried SiO₂ layer. Then the fluorescent background signal drops by = 5 times, corresponding to the limit of detection drop from = 0.05 mM to = 50 nM of fluorescein. We demonstrate the importance of a flat surface using TIRF-based single-molecule detection, improving the signal to a noise ratio more than 18 times compared to a conventional Si wafer. Overall, using very high-quality SOI substrates pays off, as it improves the fluorescence image quality due to the increase in signal-to-noise ratio. Concerning the cost of microfluidic device fabrication-design, mask fabrication, wafer processing, and device testing-the initial SOI wafer cost is marginal, and using it improves the system performance.

Solid-state electrochemiluminescence sensor based on zeolitic imidazolate framework-67 electrospinning nanofibers for chlorpyrifos detection

A novel solid-state electrochemiluminescence (ECL) sensor for chlorpyrifos (CPF) detection was constructed based on zeolitic imidazolate framework-67 electrospinning nanofibers (ZIF-67 NFs). Silver nanoparticles (Ag NPs), ZIF-67 NFs, tris(2,2'-bipyridyl) ruthenium(II) [Ru(bpy)₃²⁺], and Nafion were successively deposited on the surface of the electrode. Ag NPs played a role in promoting electron transfer, and ZIF-67 NFs played a role in fixing Ru(bpy)₃²⁺ and promoting electron transfer due to its large specific surface area and porosity. Nafion formed a film on the outermost layer of the electrode to further improve the stability of the system. Therefore, the modified electrode showed stable and obvious ECL signal in PBS solution containing 10 μL 0.01 M TprA (pH 8.0). CPF quenched the ECL signal of the system, and the quenching value was linear with the logarithm of CPF concentration in the range 1.0 × 10^-13 to 1.0 × 10^-6 M. The detection limit was 3.3 × 10^-14 M (S/N = 3). In this study, ZIF-67 NFs were used as an ECL promoter for the first time, broadening the application range of ZIF-67 NFs.

Ag-O-Co Interface Modulation-Amplified Luminol Cathodic Electrogenerated Chemiluminescence

It remains a great challenge to develop effective strategies for improving the weak cathodic electrogenerated chemiluminescence (ECL) of the luminol-dissolved O₂ system. Interface modulation between metal and supports is an attractive strategy to improve oxygen reduction reaction (ORR) activity. Therefore, the design of electrocatalysts via interface modulation would provide new opportunities for the ECL amplification involving reactive oxygen species (ROSs). Herein, we have fabricated an Ag single-atom catalyst with an oxygen-bridged interface (Ag-O-Co) through the electrodeposition of Ag on a CoAl layered double hydroxide (LDH) modified indium tin oxide (ITO) electrode (Ag^s/LDH/ITO). Interestingly, it was found that the cathodic ECL intensity of the luminol-dissolved O₂ system at the Ag^s/LDH/ITO electrode was extraordinarily enhanced in comparison with those at bare ITO and other Ag nanoparticle-based electrodes. The enhanced ECL performances of the Ag^s/LDH/ITO electrode were attributed to the increasing amounts of ROSs by electrocatalytic ORR in the Ag-O-Co interface. The electron redistribution of Ag and Co bimetallic sites could accelerate electron transfer, promote the adsorption of O₂, and sufficiently activate O₂ through a four-electron reaction pathway. Finally, the luminol cathodic ECL intensity was greatly improved. Our findings can provide inspiration for revealing the interface effects between metal and supports, and open up a new avenue to improve the luminol cathodic ECL.

Electrospun nanofibers modified with zeolitic imidazolate framework-8 for electrochemiluminescent determination of terbutaline

For the first time it is demonstrated that zeolitic imidazolate framework-8 electrospun nanofibers (ZIF-8 NF) could serve as electrochemiluminescence (ECL) accelerator for the facile detection of terbutaline residual. A novel ECL sensor for the determination of terbutaline was fabricated based on ZIF-8 NF. The ZIF-8 NF were successfully prepared according to electrospinning and in-situ growth method. First, chitosan was modified on the surface of the electrode, and then the ZIF-8 NF was modified onto the upper layer of the chitosan. Taking advantages of chitosan and ZIF-8 NF in conductivity and electrocatalysis, the modified electrode presents obvious ECL phenomenon in 0.2 M PBS solution (pH 10.0) containing 0.025 M luminol. After the addition of terbutaline, ECL intensity decreased significantly, and the decreasing value showed a linear relationship with the logarithm of terbutaline concentration. The linear range was from 2.0 × 10^-10 to 2.0 × 10^-5 M, and the detection limit was 1.41 × 10^-11 M (3σ/m). The method had high sensitivity, good stability, and good applicability to actual pork samples.

A Sensitive Signal-on Supersandwich DNA Biosensor Based on the Enhancement of Poly(aniline-luminol) Nanowires Electrochemiluminescence by Ferrocene

A signal-on supersandwich type of electrochemiluminescence (ECL) DNA biosensor was developed based on the poly(aniline-luminol) nanowires (PALNWs) modified electrode and enhancement of ferrocene (Fc) on ECL of luminol. Aminated capture DNA was covalently linked to the PALNWs on the electrode surface by the crosslinking of glutaraldehyde. In presence of target DNA, its 3' terminus hybridizes with the capture probe and the 5' terminus hybridizes with ferrocene labeled DNA (Fc-DNA) to form a long DNA concatamer supersandwich structure. The ECL intensity of the prepared biosensor was clearly improved by increasing the concentration of target DNA due to the enhancement of ferrocene on luminol ECL. The difference of the ECL intensity in the absence and presence of target DNA was used to monitor the hybridization event. The difference of ECL linearly increased with the logarithm of target DNA concentration in the range from 1.0  ×  10^-16 - 1.0  ×  10^-8 mol L^-1 with a detection limit of 5.8  ×  10^-17 mol L^-1. The sensor had high sensitivity and wide linear relationship for the detection of target DNA.

Liposome-assisted enzyme catalysis: toward signal amplification for sensitive split-type electrochemiluminescence immunoassay

Developing an efficient signal amplification strategy is very important to improve the sensitivity of bioanalysis. In this paper, a liposome-assisted enzyme catalysis signal amplification strategy was developed for electrochemiluminescence (ECL) immunoassay of prostate specific antigen (PSA) in a split-type mode. The sandwich immunoreaction occurred in a 96-well plate, and glucose oxidase (GOx) encapsulated and antibody-modified liposomes were used as labels. The ECL detection was carried out using a rGO-Au NP modified glassy carbon electrode (GCE). The large amount of generated H2O2, i.e. the coreactant of the luminol system, and the excellent catalytic behavior of rGO-Au NPs greatly boosted the ECL signal, resulting in the signal amplification. The developed ECL immunosensor for detecting PSA achieved a wider linear range from 1.0 × 10-13 to 1.0 × 10-8 g mL-1 and a detection limit of 1.7 × 10-14 g mL-1. The application of the proposed strategy was demonstrated by analyzing PSA in human serum samples with recoveries from 89.0% to 113.0%, and relative standard deviations (RSDs) were less than 6.6%. This work provides a new horizon to expand the application of liposomes for ECL bioanalysis.

Bimodal Electrogenerated Chemiluminescence of the Luminol/Dicyclohexylamine (DCHA) System: A Novel and Highly Sensitive Detection of DCHA via ECL-Flow Injection Analysis

Though luminol is one of the most prominent and extensively studied luminophores in ECL studies, only H₂O₂ has been widely used as a co-reactant. This limits the variety of applications because of the short-time radical stability and low quantum efficiency. In the present work, we identified dicyclohexylamine (DCHA) as a new and highly efficient anodic co-reactant in ECL for the luminol molecule. The electrochemical and ECL behavior of the luminol/DCHA system was studied on a simple bare GCE surface, which results in two anodic ECL peaks at the potential region of +0.38 and +0.94 V vs Ag/AgCl. The evidence of (DCHA^•+) and O₂^•- generated in the system was detected via flat-cell electron spin resonance (ESR) spectroscopy experiments at ∼20 °C. Using the bimodal ECL system, the highly sensitive detection of luminol was achieved with the detection limit down to 1.5 pM. Further, a homebuilt electrochemiluminescent detector coupled with a flow injection analysis (ECL-FIA) system was adopted to detect the DCHA contaminant in harvested honey, which achieved higher detection and sensitivity under the optimized experimental conditions. DCHA was detected in the range of 10 nM to 100 μM with the detection limit of 2 nM (S/N = 3). The present findings of new luminol/DCHA ECL signals produced a strong ECL emission, which leads to a greater potential to meet the fast-developing analytical application of a luminol-based ECL system.

Electrochemiluminescence Biosensors Using Screen-Printed Electrodes

Electrogenerated chemiluminescence (also called electrochemiluminescence (ECL)) has become a great focus of attention in different fields of analysis, mainly as a consequence of the potential remarkably high sensitivity and wide dynamic range. In the particular case of sensing applications, ECL biosensor unites the benefits of the high selectivity of biological recognition elements and the high sensitivity of ECL analysis methods. Hence, it is a powerful analytical device for sensitive detection of different analytes of interest in medical prognosis and diagnosis, food control and environment. These wide range of applications are increased by the introduction of screen-printed electrodes (SPEs). Disposable SPE-based biosensors cover the need to perform in-situ measurements with portable devices quickly and accurately. In this review, we sum up the latest biosensing applications and current progress on ECL bioanalysis combined with disposable SPEs in the field of bio affinity ECL sensors including immunosensors, DNA analysis and catalytic ECL sensors. Furthermore, the integration of nanomaterials with particular physical and chemical properties in the ECL biosensing systems has improved tremendously their sensitivity and overall performance, being one of the most appropriates research fields for the development of highly sensitive ECL biosensor devices.

Sensitive Detection of Caffeic Acid and Rutin via the Enhanced Anodic Electrochemiluminescence Signal of Luminol

The electrooxidation of phenolic groups of caffeic acid and rutin promote anodic electrochemiluminescence (ECL) luminol substantially. A sensitive, and cost-effective ECL method has thus been developed to detect caffeic acid, ranging from 0.1 to 5.0 μM, with a detection limit of 0.1 μM and rutin ranging from 0.2 to 25 μM with a detection limit of 0.12 μM. Contrarily, phenolic compounds quench the weak cathodic ECL of luminol. Both of anodic and cathodic ECL mechanisms of luminol in the presence of phenolic compounds are analyzed. The method based on the boomed anodic ECL of luminol is comparable to those based on Ru(bpy)₃²⁺ and S₂O₈^2-/O₂ systems. A lower onset potential and price than the other ECL reagents would realize its widely applications in the detection of phenolic compounds in food and medicine.

Enhanced biosensing strategies using electrogenerated chemiluminescence: recent progress and future prospects

An overview of enhancement strategies for highly sensitive ECL-based sensing of bioanalytes enabling early detection of cancer.

A Convenient Electrochemiluminescent Immunosensor for Detecting Methamphetamine Antibody

An antibody-based immunotherapy for methamphetamine (MA) addictive treatment is has been drawing more and more attention in recent years. However, studies about methamphetamine antibody (anti-MA) immunodetections are rare, owing to the lack of immunogenicity of small molecule MA. This study provides a simple and effective approach to develop a convenient electrochemiluminescent (ECL) immunosensor for the testing of anti-MA. In short, the synthetic holoantigen of MA is immobilized on a homemade gold nanoparticles modified electrode as the sensing host for the specific recognition and detection of anti-MA. The research suggested, under optimal experimental conditions, the ECL intensity on resultant immunosensor has a wide-linear regression toward the anti-MA quantity within the range from 0.03 to 3.07 ng with a detection limit of 2.32 pg. It responded to the dosage of anti-MA in spiked blood samples with satisfactory recovery. According to the research, the developed sensor shows promise as a portable Anti-MA fast seized device which performs quickly and offers convenience, and will be helpful for forensic identification and clinical treatment.

Enhanced electrochemiluminescent brightness and stability of porphyrins by supramolecular pinning and pinching for sensitive zinc detection

Ultrasensitive electrochemiluminescence (ECL) detection can benefit substantially from the rational configuration of emitter-enhancer stereochemistry. Here, using zinc(II) meso-5,10,15,20-tetra(4-sulfonatophenyl)porphyrin (ZnTSPP) as a model, we demonstrate that both the ECL intensity and the photostability of this emitter were significantly improved when it was trapped in pyridyl-bridged β-cyclodextrin dimer (Py(CD)₂); a synthetic enhancer that is ECL inactive. Through NMR characterization, we confirmed that ZnTSPP formed a clam-like inclusion complex involving pinning and pinching forces from the biocompatible container Py(CD)₂. Up to a threefold increase in the ECL brightness of ZnTSPP was witnessed when it was encapsulated in β-CD. Absorption and emission spectroscopic data revealed that both the extended excitation lifetime and the restricted mobility of the guest contributed to the observed improvement in signal transduction within the host molecule. This bioinspired entrapment also led to a marked boost in ECL stability. With the aid of the newly identified coreactant H₂O₂, the hollow TSPP@Py(CD)₂ system was employed to create a Zn²⁺-selective probe that was capable of sensitive and accurate zinc detection. The observed increase in ECL conversion and enhanced photophysical properties of this compact supramolecular assembly render it a novel template for enhancing ECL in analytical applications. Graphical abstract ᅟ.

Electrochemical-Signal-Amplification Strategy for an Electrochemiluminescence Immunoassay with g-C3N4 as Tags

Signal amplification for electrochemiluminescence (ECL) has conventionally been achieved by employing effective matrixes that can accelerate the electrochemical redox processes or carry more electrochemiluminophores. Herein, a convenient signal-amplification strategy was proposed for an ECL immunoassay with carboxylated g-C₃N₄ nanosheets (NSs) as tags and carcinoembryonic antigen (CEA) as the model target via electrochemically pretreating the substrate: a glassy-carbon electrode (GCE) modified with a polymerized 2-aminoterephthalic acid (ATA) film (GCE/ATA). Bioconjugates of g-C₃N₄ NSs and the signal CEA antibody (Ab₂) (i.e., g-C₃N₄ NS-Ab₂) were immobilized on GCE/ATA via a sandwich immunoreaction to form GCE/ATA-Ab₁-Ag-Ab₂-NSs. Electrochemical-impedance spectroscopy and potential-resolved ECL characterization proved that GCE/ATA plays an important role in the electron-transfer resistance ( R_et) of the GCE/ATA-Ab₁-Ag-Ab₂-NSs for ECL and that successively scanning GCE/ATA-Ab₁-Ag-Ab₂-NSs from 0 to -1.6 V in K₂S₂O₈- and H₂O₂-containing medium could reduce the R_et and bring out 3.3-times-enhanced ECL at the 10th scan cycle compared with that of the 1st scan cycle, which was about 10.2 times the ECL of the GCE/ATA-Ab₁-Ag-Ab₂-NSs in medium containing merely K₂S₂O₈. Inspired by this, direct and successive scanning of GCE/ATA in K₂S₂O₈- and H₂O₂-containing medium was employed during fabrication, which dramatically reduced the R_et of GCE/ATA-Ab₁-Ag-Ab₂-NSs and brought out obviously enhanced ECL responses for selectively determining CEA from 0.1 pg/mL to 1 ng/mL, with a detection limit of 3 fg/mL.

Aptasensors as the future of antibiotics test kits-a case study of the aptamer application in the chloramphenicol detection

Antibiotics are a type of antimicrobial drug with the ubiquitous presence in foodstuff that effectively applied to treat the diseases and promote the animal growth worldwide. Chloramphenicol as one of the antibiotics with the broad action spectrum against Gram-positive and Gram-negative bacteria is widely applied for the effective treatment of infectious diseases in humans and animals. Unfortunately, the serious side effects of chloramphenicol, such as aplastic anemia, kidney damage, nausea, and diarrhea restrict its application in foodstuff and biomedical fields. Development of the sufficiently sensitive methods to detect chloramphenicol residues in food and clinical diagnosis seems to be an essential demand. Biosensors have been introduced as the promising tools to overcome the requirement. As one of the newest types of the biosensors, aptamer-based biosensors (aptasensors) are the efficient sensing platforms for the chloramphenicol monitoring. In the present review, we summarize the recent achievements of the accessible aptasensors for qualitative detection and quantitative determination of chloramphenicol as a candidate of the antibiotics. The present chloramphenicol aptasensors can be classified in two main optical and electrochemical categories. Also, the other formats of the aptasensing assays like the high performance liquid chromatography (HPLC) and microchip electrophoresis (MCE) have been reviewed. The enormous interest in utilizing the diverse nanomaterials is also highlighted in the fabrication of the chloramphenicol aptasensors. Finally, some results are presented based on the advantages and disadvantages of the studied aptasensors to achieve a promising perspective for designing the novel antibiotics test kits.