Electrochemical Behaviour of Lithium, Sodium and Potassium Ion Electrolytes in a Na0.33 V2 O5 Symmetric Pseudocapacitor with High Performance and High Cyclic Stability

Sodium Vanadates for Metal-Ion Batteries: Recent Advances and Perspectives

Rechargeable metal-ion batteries (MIBs) play a pivotal role in advancing the stable supply of renewable energy by efficiently storing and discharging electrical energy. In recent years, to propel the continuous advancement of MIB technology, numerous studies have concentrated on exploring and innovating electrode materials, aiming to engineer commercial batteries with high energy density, superior power density, and extended cycle life. Notably, sodium vanadates have garnered significant attention in the realm of MIBs owing to their distinctive crystal structures, abundant resource reservoirs, and exceptional electrochemical properties. This paper provides a prompt and comprehensive review of the research landscape for various sodium vanadates (such as NaxV2O5, Na1+ xV3O8, Na2V6O16·xH2O, etc.) in the domain of MIBs over the past five years. It delves into the structural characteristics, electrochemical performances, and energy storage mechanisms of these materials, while also proposing some effective strategies to augment their electrochemical capabilities. Building upon these insights and prevailing research outcomes, this review envisions the future developmental pathways of sodium vanadates for MIBs and aims to reveal the vast potential of sodium vanadates in the emerging energy storage field and provide researchers with clear insights and perspectives for developing optimal sodium vanadate electrodes.

Enhancing Supercapacitor Electrochemical Performance with 3D Printed Cellular PEEK/MWCNT Electrodes Coated with PEDOT: PSS

In this study, we examine the electrochemical performance of supercapacitor (SC) electrodes made from 3D-printed nanocomposites. These composites consist of multiwalled carbon nanotubes (MWCNTs) and polyether ether ketone (PEEK), coated with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The electrochemical performance of a 3D-printed PEEK/MWCNT solid electrode with a surface area density of 1.2 mm-1 is compared to two distinct periodically porous PEEK/MWCNT electrodes with surface area densities of 7.3 and 7.1 mm-1. To enhance SC performance, the 3D-printed electrodes are coated with a conductive polymer, PEDOT:PSS. The architected cellular electrodes exhibit significantly improved capacitive properties, with the cellular electrode (7.1 mm-1) displaying a capacitance nearly four times greater than that of the solid 3D-printed electrode-based SCs. Moreover, the PEDOT:PSS-coated cellular electrode (7.1 mm-1) demonstrates a high specific capacitance of 12.55 mF·cm-3 at 50 mV·s-1, contrasting to SCs based on 3D-printed cellular electrodes (4.09 mF·cm-3 at 50 mV·s-1) without the coating. The conductive PEDOT:PSS coating proves effective in reducing surface resistance, resulting in a decreased voltage drop during the SCs' charging and discharging processes. Ultimately, the 3D-printed cellular nanocomposite electrode with the conductive polymer coating achieves an energy density of 1.98 μW h·cm-3 at a current of 70 μA. This study underscores how the combined effect of the surface area density of porous electrodes enabled by 3D printing, along with the conductivity imparted by the polymer coating, synergistically improves the energy storage performance.

V-Doping Strategy Induces the Construction of the CoFe-LDHs/NF Electrodes with Higher Conductivity to Achieve Higher Energy Density for Advanced Energy Storage Devices

Doping of metal ions shows promising potential in optimizing and modulating the electrical conductivity of layered double hydroxides (LDHs). However, there is still much room for improvement in common metal ions and conventional doping methods. In contrast to previous methodologies, a hollow triangular nanoflower structure of CoFeV-LDHs is devised, which is enriched with a greater number of oxygen vacancies. This resulted in a significant enhancement in the conductivity of the LDHs, leading to an increase in energy density following the appropriate doping of V. To investigate the impact of V-doping on the energy density of the LDHs, in situ XPS and in situ X-ray spectroscopy is employed. Regarding electrochemical performance, the CoFeV-LDHs/NF electrode with optimal doping ratio exhibited a specific capacitance of 881 F g-1 at a current density of 1 A g-1. The capacitance remained at 90.53% after 3000 cycles. In addition, the constructed battery-type supercapacitor CoFeV-LDHs/NF-2//AC exhibited an impressive energy density of 124.7 Wh kg-1 at a power density of 850 W kg-1 and capacitance remained almost unchanged at 95.2% after 3000 cycles. All the above demonstrates the great potential of V-doped LDHs and brings a new way for the subsequent research of LDHs.

Pseudocapacitive Storage in Molybdenum Oxynitride Nanostructures Reactively Sputtered on Stainless-Steel Mesh Towards an All-Solid-State Flexible Supercapacitor

Exploiting pseudocapacitance in rationally engineered nanomaterials offers greater energy storage capacities at faster rates. The present research reports a high-performance Molybdenum Oxynitride (MoON) nanostructured material deposited directly over stainless-steel mesh (SSM) via reactive magnetron sputtering technique for flexible symmetric supercapacitor (FSSC) application. The MoON/SSM flexible electrode manifests remarkable Na+-ion pseudocapacitive kinetics, delivering exceptional ≈881.83 F g-1 capacitance, thanks to the synergistically coupled interfaces and junctions between nanostructures of Mo2N, MoO2, and MoO3 co-existing phases, resulting in enhanced specific surface area, increased electroactive sites, improved ionic and electronic conductivity. Employing 3D Bode plots, b-value, and Dunn's analysis, a comprehensive insight into the charge-storage mechanism has been presented, revealing the superiority of surface-controlled capacitive and pseudocapacitive kinetics. Utilizing PVA-Na2SO4 gel electrolyte, the assembled all-solid-state FSSC (MoON/SSM||MoON/SSM) exhibits impressive cell capacitance of 30.7 mF cm-2 (438.59 F g-1) at 0.125 mA cm-2. Moreover, the FSSC device outputs a superior energy density of 4.26 µWh cm-2 (60.92 Wh kg-1) and high power density of 2.5 mW cm-2 (35.71 kW kg-1). The device manifests remarkable flexibility and excellent electrochemical cyclability of ≈91.94% over 10,000 continuous charge-discharge cycles. These intriguing pseudocapacitive performances combined with lightweight, cost-effective, industry-feasible, and environmentally sustainable attributes make the present MoON-based FSSC a potential candidate for energy-storage applications in flexible electronics.

Topochemically prepared tungsten disulfide nanostructures as a novel pseudocapacitive electrode for high performance supercapacitor

The topochemical preparation of nanostructured materials (NMs) has received significant attention in recent years due to the exceptional electrochemical properties exhibited by the resulting NMs. This work focuses on the preparation of two-dimensional tungsten di-sulfide (WS2) nanostructures through the topochemical conversion of tungsten trioxide (WO3) nanostructures and also evaluates their potential applications as electrode materials for supercapacitors (SCs). The X-ray diffraction and photoelectron studies conducted in this research reveal the conversion of hexagonal WO3 into hexagonal WS2 nanosheets, accompanied by changes in oxidation states. The FE-SEM and HR-TEM studies confirm the formation of WS2 in the sheet-like morphologies with lateral dimensions of 100 × 100 nm. The electrochemical investigation, using techniques such as CV, galvanostatic CD, and EIS, confirmed the presence of intercalation pseudocapacitance in the WS2 electrode, with a higher electrode-specific-capacitance (260 F g-1) than that of WO3 electrode. The WS2 symmetric SC delivered high device capacitance (59.17 F g-1), energy density (8.21 Wh kg-1) and power density (3,750 W kg-1) with better cyclic stability over 5000 cycles. These experimental findings show that the topochemically synthesized WS2as novel supercapacitor electrodes might be useful for the advancement of future-generation energy storage devices.

4-Cyanophenol herbicide sensor using multi-walled carbon nanotube embedded dual-microporous polypyrrole nanoparticles as metal-free and environmentally friendly hybrid electrode

A highly sensitive 4-cyanophenol (4-CP) sensor was fabricated using multi-walled carbon nanotube (MWCNT)-embedded dual-microporous polypyrrole nanoparticle-modified screen-printed carbon electrodes (SPCE/DMPPy/MWCNT). The well-defined dual pores of DMPPy and MWCNT (~ 0.53 and ~ 0.65 nm) acted as good analyte absorption agents (shortening the ion diffusion path) and conducting agents (reducing the internal electron-transfer resistance). This enhanced electrical conductivity resulted in the improved electro-oxidation of 4-CP. A higher sensitivity (19.0 μA μM^-1 cm^-2) and lower limit of detection (0.8 nM) were achieved with a wide detection range of 0.001-400 µM (R² = 0.9988). The proposed sensor exhibited excellent recovery of 4-CP in real-world samples. Therefore, the SPCE/DMPPy/MWCNT sensor is regarded highly suitable for rapidly detecting 4-CP.

Semi-Polycrystalline Polyaniline-Activated Carbon Composite for Supercapacitor Application

We report on the synthesis of activated carbon-semi-polycrystalline polyaniline (SPani-AC) composite material using in-situ oxidative polymerization of aniline on the carbon surface in an aqueous HCl medium at an elevated temperature of 60 °C. The electroactive polymeric composite material exhibits a uniformly distributed spindle-shaped morphology in scanning electron microscopy (SEM) and well-defined crystallographic lattices in the high-resolution transmission electron microscopy (TEM) images. The X-ray diffraction (XRD) spectrum reveals sharp peaks characteristic of crystalline polyaniline. The characteristic chemical properties of polyaniline are recorded using laser Raman spectroscopy. The cyclic voltammetry curves exhibit features of surface-redox pseudocapacitance. The specific capacitance calculated for the material is 507 F g^-1 at the scan rate of 10 mV s^-1. The symmetrical two-electrodes device exhibits a specific capacitance of 45 F g^-1 at a current density of 5 A g^-1. The capacitive retention calculated was found to be 96% up to 4500 continuous charge-discharge cycles and observed to be gradually declining at the end of 10,000 cycles. On the other hand, Coulombic efficiency was observed to be retained up to 85% until 4500 continuous charge-discharge cycles which declines up to 72% at the end of 10,000 cycles. The article also presents a detailed description of material synthesis, the formation of polyaniline (Pani) chains, and the role of material architecture in the performance as surface redox supercapacitor electrode.

Recent Advances in Layered Metal-Oxide Cathodes for Application in Potassium-Ion Batteries

To meet future energy demands, currently, dominant lithium-ion batteries (LIBs) must be supported by abundant and cost-effective alternative battery materials. Potassium-ion batteries (KIBs) are promising alternatives to LIBs because KIB materials are abundant and because KIBs exhibit intercalation chemistry like LIBs and comparable energy densities. In pursuit of superior batteries, designing and developing highly efficient electrode materials are indispensable for meeting the requirements of large-scale energy storage applications. Despite using graphite anodes in KIBs instead of in sodium-ion batteries (NIBs), developing suitable KIB cathodes is extremely challenging and has attracted considerable research attention. Among the various cathode materials, layered metal oxides have attracted considerable interest owing to their tunable stoichiometry, high specific capacity, and structural stability. Therefore, the recent progress in layered metal-oxide cathodes is comprehensively reviewed for application to KIBs and the fundamental material design, classification, phase transitions, preparation techniques, and corresponding electrochemical performance of KIBs are presented. Furthermore, the challenges and opportunities associated with developing layered oxide cathode materials are presented for practical application to KIBs.

Vanadium oxides obtained by chimie douce reactions: The influences of transition metal species on crystal structures and electrochemical behaviors in zinc-ion batteries

Rechargeable aqueous zinc-ion batteries (RAZIBs) have received increasing attention due to cost-effectiveness and inherent safety. A wide variety of advanced cathode materials have been revealed with promising performance in RAZIBs. However, these materials usually require sophisticated procedures at high temperatures, which greatly limit further practical application. Herein, a chimie douce approach is adopted to prepare vanadium oxides from V₂O₅ suspension with the addition of various transition metal cations (Mn²⁺, Zn²⁺, Ag⁺, and Fe³⁺) by simple liquid-solid mixing under ambient conditions. For the cases of Mn²⁺ and Zn²⁺, the dissolution-recrystallization process takes place leading to layered Mn_0.31V₃O₇·1.40H₂O (MnVO) and Zn_0.32V₃O₇·1.52H₂O (ZnVO). The use of Ag⁺ forms tunneled Ag_0.33V₂O₅ (AgVO), and the present of Fe³⁺ stays mainly unreacted V₂O₅. The underlying reaction chemistries are proposed, for which the pH values of precursor solutions are found to be a key factor. Among the prepared materials, layered vanadium oxides exhibit promising battery performance. Particularly, MnVO delivers 340 and 217 mAh g^-1 at 1 and 8 A g^-1, respectively. A specific capacity of 164 mAh g^-1 can be retained after 500 cycles at 1 A g^-1. By contrast, AgVO and FeVO demonstrate inferior performance with retaining only 89 and 20 mAh g^-1 after 500 cycles.

Telemedicine platform for health assessment remotely by an integrated nanoarchitectonics FePS3/rGO and Ti3C2-based wearable device

Due to the emergence of various new infectious (viral/bacteria) diseases, the remote surveillance of infected persons has become most important, especially if hospitals need to isolate infected patients to prevent the spreading of pathogens to health care personnel. Therefore, we develop a remote health monitoring system by integrating a stretchable asymmetric supercapacitor (SASC) as a portable power source with sensors that can monitor the human physical health condition in real-time and remotely. An abnormal body temperature and breathing rate could indicate a person's sickness/infection status. Here we integrated FePS₃@graphene-based strain sensor and SASC into an all-in-one textile system and wrapped it around the abdomen to continuously monitor the breathing cycle of the person. The real body temperature was recorded by integrating the temperature sensor with the SASC. The proposed system recorded physiological parameters in real-time and when monitored remotely could be employed as a screening tool for monitoring pathogen infection status.

Emerging Potassium-ion Hybrid Capacitors

As a new type of capacitor-battery hybrid energy storage device, metal-ion capacitors have attracted widespread attention because of their high-power density while ensuring energy density and long lifespan. Potassium-ion capacitors (KICs) featuring the merits of abundant potassium resources, lower standard electrode potential, and low cost have been considered as potential alternatives to lithium-/sodium-ion capacitors. However, KICs still face issues including unsatisfactory reaction kinetics, low energy density, and poor lifetime owing to the large radius of the potassium ion. In this Review, the importance of emerging potassium-ion capacitor is addressed. The Review offers a brief discussion of the fundamental working principle of KICs, along with an overview of recent advances and achievements of a variety of electrode materials for dual carbon and non-dual carbon KICs. Furthermore, electrolyte chemistry, binders as well as electrode/electrolyte interface, are summarized. Finally, existing challenges and perspectives on further development of KICs are also presented.

Efficient Flexible All-Solid Supercapacitors with Direct Sputter-Grown Needle-Like Mn/MnOx@Graphite-Foil Electrodes and PPC-Embedded Ionic Electrolytes

Recent critical issues regarding next-generation energy storage systems concern the cost-effective production of lightweight, safe and flexible supercapacitors yielding high performances, such as high energy and power densities as well as a long cycle life. Thus, current research efforts are concentrated on the development of high-performance advance electrode materials with high capacitance and excellent stability and solid electrolytes that confer flexibility and safety features. In this work, emphasis is placed on the binder-free, needle-like nanostructured Mn/MnOx layers grown onto graphite-foil deposited by reactive sputtering technique and to the polymer gel embedded ionic electrolytes, which are to be employed as new flexible pseudocapacitive supercapacitor components. Microstructural, morphological and compositional analysis of the layers has been investigated by X-ray diffractometer (XRD), Field Emission Scanning Electron Microscope (FE-SEM) and X-ray photoelectron spectroscopy (XPS). A flexible lightweight symmetric pouch-cell solid-state supercapacitor device is fabricated by sandwiching a PPC-embedded ionic liquid ethyl-methylimidazolium bis (trifluoromethylsulfonyl) imide (EMIM)(TFSI) polymer gel electrolyte (PGE) between two Mn/MnOx@Graphite-foil electrodes and tested to exhibit promising supercapacitive behaviour with a wide stable electrochemical potential window (up to 2.2 V) and long-cycle stability. This pouch-cell supercapacitor device offers a maximum areal capacitance of 11.71 mF/cm2@ 0.03 mA/cm2 with maximum areal energy density (Ea) of 7.87 mWh/cm2 and areal power density (Pa) of 1099.64 mW/cm2, as well as low resistance, flexibility and good cycling stability. This supercapacitor device is also environmentally safe and could be operated under a relatively wide potential window without significant degradation of capacitance performance compared to other reported values. Overall, these rationally designed flexible symmetric all-solid-state supercapacitors signify a new promising and emerging candidate for component integrated storage of renewable energy harvested current.

Nanostructured manganese oxides electrode with ultra-long lifetime for electrochemical capacitors

We describe the instantaneous fabrication of a highly porous three-dimensional (3D) nanostructured manganese oxides-reduced graphitic oxide (MnO_x-rGO) electrode by using a pulse-photonic processing technique. Such nanostructures facilitate the movement of ions/electrons and offer an extremely high surface area for the electrode/electrolyte interaction. The electrochemical performance was investigated by cyclic voltammetry (CV), galvanostatic charge–discharge (GCD) and electrochemical impedance spectroscopy (EIS) with 1 M KOH as the electrolyte. The as-prepared thin film electrode exhibits excellent electrochemical performance and an ultra-long lifetime by retaining 90% of the initial capacitance even after 100 000 GCD cycles at constant areal current density of 0.4 mA cm⁻². We attribute this excellent lifetime performance to the conductive reduced graphitic oxide, synergistic effects of carbon composite and the metal oxides, and the unique porous nanostructure. Such highly porous morphology also enhances the structural stability of the electrode by buffering the volume changes during the redox processes.

We describe the instantaneous fabrication of a highly porous three-dimensional (3D) nanostructured manganese oxides-reduced graphitic oxide (MnO_x-rGO) electrode by using a pulse-photonic processing technique.

Synthesis and cationic dye biosorption properties of a novel low-cost adsorbent: coconut waste modified with acrylic and polyacrylic acids

Coconut waste (CW), a novel, low cost adsorbent, has been utilized for the removal of methylene blue (MB) dye from an aqueous solution. CW was chemically modified with acrylic (AcA) and polyacrylic acids (PAcA) using different modification methods, such as esterification with AcA, chemically grafting of PAcA, and plasma-enhanced chemical vapor deposition (PECVD) coating with PAcA. CW-based adsorbents were used in the experiments to study MB adsorption probability, and their activities were compared. The adsorption behavior of MB onto the adsorbents was investigated with respect to parameters such as sorbent dosage (0.5-4 g/L), pH (2-10), initial dye concentration (50-250 mg/L), and temperature (22-65 °C). The time taken of AcA modified CW (CW-AcA), PAcA-grafted CW (CW-PAcA_grafted), and PAcA-coated CW (CW-PAcA_coated) for the removal of 94.6%, 97.7%, and 91.0% of MB from 50 mg/L of dye solution is 180 min. Characterization of CW-based adsorbents was achieved using SEM, XRD, BET, XPS, and FT-IR analysis. The adsorption fitted the Langmuir model, and the adsorption kinetics were consistent with a pseudosecond-order kinetics model. The results obtained from the maximum adsorption capacity (q_max) for AcA-, PAcA_coated-, and PAcA_grafted-CWs were 138.88, 136.98, and 98.03 mg/g at adsorbent dose of 0.1 g/50 mL for initial dye concentration of 200 mg/L, 22 ± 1 °C, and pH 10:10:8.

A mini-review: emerging all-solid-state energy storage electrode materials for flexible devices

New technologies for future electronics such as personal healthcare devices and foldable smartphones require emerging developments in flexible energy storage devices as power sources. Besides the energy and power densities of energy devices, more attention should be paid to safety, reliability, and compatibility within highly integrated systems because they are almost in 24-hour real-time operation close to the human body. Thereupon, all-solid-state energy devices become the most promising candidates to meet these requirements. In this mini-review, the most recent research progress in all-solid-state flexible supercapacitors and batteries will be covered. The main focus of this mini-review is to summarize new materials development for all-solid-state flexible energy devices. The potential issues and perspectives regarding all-solid-state flexible energy device technologies will be highlighted.

Surface-Engineered Black Niobium Oxide@Graphene Nanosheets for High-Performance Sodium-/Potassium-Ion Full Batteries

Nanoscale surface-engineering plays an important role in improving the performance of battery electrodes. Nb₂ O₅ is one typical model anode material with promising high-rate lithium storage. However, its modest reaction kinetics and low electrical conductivity obstruct the efficient storage of larger ions of sodium or potassium. In this work, partially surface-amorphized and defect-rich black niobium oxide@graphene (black Nb₂ O_{5- x} @rGO) nanosheets are designed to overcome the above Na/K storage problems. The black Nb₂ O_{5- x} @rGO nanosheets electrodes deliver a high-rate Na and K storage capacity (123 and 73 mAh g^-1 , respectively at 3 A g^-1 ) with long-term cycling stability. Besides, both Na-ion and K-ion full batteries based on black Nb₂ O_{5- x} @rGO nanosheets anodes and vanadate-based cathodes (Na_0.33 V₂ O₅ and K_0.5 V₂ O₅ for Na-ion and K-ion full batteries, respectively) demonstrate promising rate and cycling performance. Notably, the K-ion full battery delivers higher energy and power densities (172 Wh Kg^-1 and 430 W Kg^-1 ), comparable to those reported in state-of-the-art K-ion full batteries, accompanying with a capacity retention of ≈81.3% over 270 cycles. This result on Na-/K-ion batteries may pave the way to next-generation post-lithium batteries.

Aqueous Al-Ion Supercapacitor with V2O5 Mesoporous Carbon Electrodes

A high-performance, low-cost, aqueous Al-ion supercapacitor was fabricated based on nanostructured V₂O₅ impregnated mesoporous carbon microspheres (MCM/V₂O₅) electrodes and Al₂(SO₄)₃ electrolyte for efficient energy storage. MCM/V₂O₅ composites exhibit high dispersion of nanostructured V₂O₅ in a mesoporous carbon matrix, beneficial to fast reversible redox reactions with a short diffusion path. The corresponding capacitor illustrates the distinguishable redox behavior, most likely due to the Al³⁺ intercalation/deintercalation leading to the reduction/oxidation of V⁵⁺/V⁴⁺. It delivers a high-energy density of 18.0 Wh kg^-1 at 147 W kg^-1 and a long cycling lifespan with over 88% capacitance retention over 10 000 cycles. The competitive performance can be ascribed to the integration of the electric double layer capacitance provided from MCM with pseudocapacitance contributed by nanostructured V₂O₅. This work offers the possibilities of high-performance aqueous capacitors based on trivalent Al-ion as guest species, providing new directions for future development of supercapacitors.

Selective catalytic oxidation of benzene to phenol by a vanadium oxide nanorod (Vnr) catalyst in CH3CN using H2O2(aq) and pyrazine-2-carboxylic acid (PCA)

A vanadium oxide nanorod (V_nr) catalyst has been synthesized without using surfactants through crystallization, which is highly active for benzene to phenol oxidation.